aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-15pseries: Add support for level interrupts to XICSDavid Gibson
The pseries "xics" interrupt controller, like most interrupt controllers can support both message (i.e. edge sensitive) interrupts and level sensitive interrupts, but it needs to know which are which. When I implemented the xics emulation for qemu, the only devices we supported were the PAPR virtual IO devices. These devices only use message interrupts, so they were the only ones I implemented in xics. Since then, however, we have added support for PCI devices, which use level sensitive interrupts. It turns out the message interrupt logic still actually works most of the time for these, but there are circumstances where we can lost interrupts due to the incorrect interrupt logic. This patch, therefore, implements the correct xics level-sensitive interrupt logic. The type of the interrupt is set when a device allocates a new xics interrupt. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15PPC: Fix large page support in TCGNathan Whitehorn
Fix large page support in TCG. The old code would overwrite the large page table entry with the fake 4 KB one generated here whenever the ref/change bits were updated, causing it to point to the wrong area of memory. Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org> Acked-by: David Gibson <david@gibson.drobpear.id.au> [agraf: fix whitespace, braces] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15PPC: Add PIR register to POWER7 CPUNathan Whitehorn
The POWER7 emulation is missing the Processor Identification Register, mandatory in recent POWER CPUs, that is required for SMP on at least some operating systems (e.g. FreeBSD) to function properly. This patch copies the existing PIR code from the other CPUs that implement it. Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15pseries: Remove PCI device from PCI host bridge codeAlexey Kardashevskiy
The sPAPR PCI code defines a PCI device "spapr-pci-host-bridge-pci" which is never used. This came over from the earlier bridge driver we used as a template. Some other bridges appear on their own PCI bus as a device, but that is not true of pSeries bridges, which are pure host to PCI with no visible presence on the PCI side. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15pseries: Remove unused constant from PCI codeDavid Gibson
The 'bars' constant array was used in experimental device allocation code which is no longer necessary now that we always run the SLOF firmware. This patch removes the now redundant variable. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15pseries: Update SLOF firmware imageDavid Gibson
This patch updates the SLOF firmware image used on the pseries machine. The new version adds support for Cirrus VGA and virtfs, as well as including a number of bugfixes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15PPC64: Add support for ldbrx and stdbrx instructionsThomas Huth
These instructions for loading and storing byte-swapped 64-bit values have been introduced in PowerISA 2.06. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15pseries: Don't try to munmap() a malloc()ed TCE tableDavid Gibson
For the pseries machine, TCE (IOMMU) tables can either be directly malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed from a KVM ioctl. The latter option is used when available, because it allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated. However, even when KVM is persent, TCE acceleration is not always possible. Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out of contiguous memory to allocate the new table. In this case we need to fall back on the malloc()ed table. When a device is removed, and we need to remove the TCE table, we need to either munmap() or free() the table as appropriate for how it was allocated. The code is supposed to do that, but we buggily fail to initialize the tcet->fd variable in the malloc() case, which is used as a flag to determine which is the right choice. This patch fixes the bug, and cleans up error messages relating to this path while we're at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15ppc: Add missing 'static' to spin_rw_opsStefan Weil
spin_rw_ops is only used in hw/ppce500_spin.c. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15PPC: 405: Fix ppc405ep initializationAlexander Graf
When trying to run a ppc405 guest, it segfaults quite quickly, trying to access timers that weren't initialized. Initialize them properly instead. Reported-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15Bad zero comparison for sas_ss_flags on powerpcAlex Barcelo
All architectures work the same way, and all check for sas_ss_flags == 0. The powerpc lines are wrong, and do the check the other way round (it's a qemu internal check, which is done wrong only for this architecture, it's more a typo than a bug). It's NOT ppc specific, it's POSIX standard (sigaltstack) and qemu internal. I have a test source that I will send in a follow-up (it's longer than I would have wished, I'm sure that a better test case can be written if needed) Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-14target-lm32/microblaze: Drop second CPU{LM32, MB}State typedefAndreas Färber
Commit 9b9a970a23625de4ae6b7461906a9a0d98d3ca95 (target-lm32/microblaze: Typedef struct CPU{MB,LM32}State) introduced necessary typedefs for cpu_mmu_index() and mmu.h respectively. On some GCC versions this leads to "error: redefinition of typedef". Drop the original typedef to hopefully fix the build. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Merge remote-tracking branch 'afaerber/qom-cpu.v5' into stagingAnthony Liguori
* afaerber/qom-cpu.v5: (43 commits) qom: Introduce CPU class Rename CPUState -> CPUArchState xtensa hw/: Don't use CPUState sparc hw/: Don't use CPUState sh4 hw/: Don't use CPUState s390x hw/: Don't use CPUState ppc hw/: Don't use CPUState mips hw/: Don't use CPUState microblaze hw/: Don't use CPUState m68k hw/: Don't use CPUState lm32 hw/: Don't use CPUState i386 hw/: Don't use CPUState cris hw/: Don't use CPUState arm hw/: Don't use CPUState alpha hw/: Don't use CPUState xtensa-semi: Don't use CPUState m68k-semi: Don't use CPUState arm-semi: Don't use CPUState target-xtensa: Don't overuse CPUState target-unicore32: Don't overuse CPUState ...
2012-03-14vnc: Limit r/w access to size of allocated memoryStefan Weil
This fixes memory reads and writes which exceeded the upper limit of allocated memory vd->guest.ds->data and vd->server->data. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14vnc: don't mess up with iohandlers in the vnc threadCorentin Chary
The threaded VNC servers messed up with QEMU fd handlers without any kind of locking, and that can cause some nasty race conditions. Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(), which will wait for the current job queue to finish, can be called with the iothread lock held. Instead, we now store the data in a temporary buffer, and use a bottom half to notify the main thread that new data is available. vnc_[un]lock_ouput() is still needed to access VncState members like abort, csock or jobs_buffer. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14qom: Introduce CPU classAndreas Färber
Reintroduce CPUState as QOM object: It's abstract and derived directly from TYPE_OBJECT for compatibility with the user emulators. The identifier CPUState avoids conflicts between CPU() and the struct. Introduce $(qom-twice-y) to build it separately for system and for user emulators. Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14xtensa hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/xtensa_*.[hc]; do sed -i "s/CPUState/CPUXtensaState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14sparc hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/sun4m.c hw/sun4u.c hw/grlib.h hw/leon3.c; do sed -i "s/CPUState/CPUSPARCState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14sh4 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/sh.h hw/shix.c hw/r2d.c; do sed -i "s/CPUState/CPUSH4State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14s390x hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/s390-*.[hc]; do sed -i "s/CPUState/CPUS390XState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14ppc hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do sed -i "s/CPUState/CPUPPCState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14mips hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/mips_*.[hc]; do sed -i "s/CPUState/CPUMIPSState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14microblaze hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/microblaze_*.[hc] hw/petalogix_ml605_mmu.c hw/petalogix_s3adsp1800_mmu.c; do sed -i "s/CPUState/CPUMBState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14m68k hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/an5206.c hw/dummy_m68k.c hw/mcf.h hw/mcf5206.c hw/mcf5208.c hw/mcf_intc.c; do sed -i "s/CPUState/CPUM68KState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14lm32 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/lm32_boards.c hw/milkymist.c; do sed -i "s/CPUState/CPULM32State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14i386 hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/apic.h hw/kvm/apic.c hw/kvmvapic.c hw/pc.c hw/vmport.c hw/xen_machine_pv.c; do sed -i "s/CPUState/CPUX86State/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14cris hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/cris-boot.[hc] hw/cris_pic_cpu.c hw/axis_dev88.c hw/etraxfs.h hw/etraxfs_ser.c; do sed -i "s/CPUState/CPUCRISState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14arm hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/arm-misc.h hw/arm_boot.c hw/arm_pic.c hw/armv7m.c hw/exynos4210.h hw/highbank.c hw/integratorcp.c hw/musicpal.c hw/omap.h hw/pxa.h hw/pxa2xx_gpio.c hw/pxa2xx_pic.c hw/realview.c hw/strongarm.h hw/versatilepb.c hw/vexpress.c hw/xilinx_zynq.c ; do sed -i "s/CPUState/CPUARMState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14alpha hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/alpha_*.[hc]; do sed -i "s/CPUState/CPUAlphaState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14xtensa-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" xtensa-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14m68k-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" m68k-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14arm-semi: Don't use CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUARMState/g" arm-semi.c Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-xtensa: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUXtensaState/g" target-xtensa/*.[hc] sed -i "s/#define CPUXtensaState/#define CPUState/" target-xtensa/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-unicore32: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUUniCore32State/g" target-unicore32/*.[hc] sed -i "s/#define CPUUniCore32State/#define CPUState/" target-unicore32/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sparc: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc] sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-s390x: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc] sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-ppc: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc] sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-microblaze: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMBState/g" target-microblaze/*.[hc] sed -i "s/#define CPUMBState/#define CPUState/" target-microblaze/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-m68k: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUM68KState/g" target-m68k/*.[hc] sed -i "s/#define CPUM68KState/#define CPUState/" target-m68k/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-lm32: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPULM32State/g" target-lm32/*.[hc] sed -i "s/#define CPULM32State/#define CPUState/" target-lm32/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-i386: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc] sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-cris: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUCRISState/g" target-cris/*.[hc] sed -i "s/#define CPUCRISState/#define CPUState/" target-cris/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-arm: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUARMState/g" target-arm/*.[hc] sed -i "s/#define CPUARMState/#define CPUState/" target-arm/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-14target-alpha: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUAlphaState/g" target-alpha/*.[hc] sed -i "s/#define CPUAlphaState/#define CPUState/" target-alpha/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14bsd-user: Don't overuse CPUStateAndreas Färber
Use CPU*State where applicable. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14darwin-user: Don't overuse CPUStateAndreas Färber
Use CPU*State where applicable. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14linux-user: Don't overuse CPUStateAndreas Färber
In target-specific code use CPU*State. While at it, fix indentation on those lines. Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-17 20:05:58 +0000