| Age | Commit message (Collapse) | Author |
|---|
|
The `ccache` tool can be very effective at reducing compilation times
when re-running pipelines with only minor changes each time. For example
a fresh 'build-system-fedora' job will typically take 20 minutes on the
gitlab.com shared runners. With ccache this is reduced to as little as
6 minutes.
Normally meson would auto-detect existance of ccache in $PATH and use
it automatically, but the way we wrap meson from configure breaks this,
as we're passing in an config file with explicitly set compiler paths.
Thus we need to add $CCACHE_WRAPPERSPATH to the front of $PATH. For
unknown reasons if doing this in msys though, gcc becomes unable to
invoke 'cc1' when run from meson. For msys we thus set CC='ccache gcc'
before invoking 'configure' instead.
A second problem with msys is that cache misses are incredibly
expensive, so enabling ccache massively slows down the build when
the cache isn't well populated. This is suspected to be a result of
the cost of spawning processes under the msys architecture. To deal
with this we set CCACHE_DEPEND=1 which enables ccache's 'depend_only'
strategy. This avoids extra spawning of the pre-processor during
cache misses, with the downside that is it less likely ccache will
find a cache hit after semantically benign compiler flag changes.
This is the lesser of two evils, as otherwise we can't use ccache
at all under msys and remain inside the job time limit.
If people are finding ccache to hurt their pipelines, it can be
disabled by setting the 'CCACHE_DISABLE=1' env variable against
their gitlab fork CI settings.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230804111054.281802-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-2-alex.bennee@linaro.org>
|
|
into staging
Pull request for bsd-user 2023 Q3 (first batch)
First batch of commits submitted by my GSoC student Karim Taha
These implement the stat, statfs, statfh and dirents system calls.
In addition, fix a missing break statment, and submit Richard Henderson's
elf stat mmap cleansup.
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmTtL6EACgkQbBzRKH2w
# EQALHQ//WOoHYxpNS1hy+oYIAvjW0JOqz9gCSFR0d56mDBShm7WO/9FZA6eGAzYQ
# i5kBSVFwEBlM76K5vLTbRvCbCbAwlpAdMgI7HXValjspNhvu/66DNWmdil6GnXKu
# 4QRaM/QGrobmYrNmf4SdgyjlMVH7wGyTrCTpXfvPfktZLAbQq7dCyNPTsOYXJP2V
# LASk8j2gyW6fDi3z1AxTNVfS7BJX6DWMhPhlvC/aUOLVVGgj9Hw9uxPaKXC1t47D
# bpZ+wJb4GMkcsmuiGJ40CXowjQ+M1lBrA4rN+lTMJNttZJ+TUYmizTFkYhX+B28h
# Q2JZy5eLXlsxxRByOkOwFczfDT6jlG4BlK4jmDOvKlrTPLaWIHjezztTavWIZDlU
# ce1oXQo3KEdWoa/QEsuxLeBbE+uZpu5+NqLeCk1cU4GPks8nbAcD7BGl6dDHKXM4
# 8vCcOMZLwO+xi5Etgcf/MtTPMpSO0rD9fTq2VSdYX0H197mkOdyCDAXjfKPsBUIE
# VLAnCFfajMNRc5ITobEbz4GiMD/xy5s8eDZNeefG8lgySpl9XB2Lvw7SWDz1imsL
# nBgQH6RHznU65wEvVGtnCGMj5kIMbohY2AGR75iGkRdgR+t2zMjUIiaU/qivD+6z
# IEJ2jqDWqtQb81jFNrFzJlsim+GYRl0HcaEmyye2bgf5LHRSSNM=
# =ORJ7
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 28 Aug 2023 19:37:05 EDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag '2023q3-bsd-user-pull-request' of https://gitlab.com/bsdimp/qemu: (36 commits)
bsd-user: Add missing break after do_bsd_preadv
bsd-user: Add getdents and fcntl related system calls
bsd-user: Add glue for statfs related system calls
bsd-user: Add glue for getfh and related syscalls
bsd-user: Add glue for the freebsd11_stat syscalls
bsd-user: Add os-stat.c to the build
bsd-user: Implement do_freebsd_realpathat syscall
bsd-user: Implement freebsd11 netbsd stat related syscalls
bsd-user: Implement freebsd11 getdirents related syscalls
bsd-user: Implement freebsd11 statfs related syscalls
bsd-user: Implement freebsd11 fstat and fhstat related syscalls
bsd-user: Implement freebsd11 stat related syscalls
bsd-user: Implement stat related syscalls
bsd-user: Implement getdents related syscalls
bsd-user: Implement statfs related syscalls
bsd-user: Implement statfh related syscalls
bsd-user: Implement stat related syscalls
bsd-uesr: Implement h2t_freebsd_stat and h2t_freebsd_statfs functions
bsd-user: Implement target_to_host_fcntl_cmd
bsd-user: Implement h2t_freebds11_statfs
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
accel/*: Widen pc/saved_insn for *_sw_breakpoint
accel/tcg: Replace remaining target_ulong in system-mode accel
tcg: spelling fixes
tcg: Document bswap, hswap, wswap byte patterns
tcg: Introduce negsetcond opcodes
tcg: Fold deposit with zero to and
tcg: Unify TCG_TARGET_HAS_extr[lh]_i64_i32
tcg/i386: Drop BYTEH deposits for 64-bit
tcg/i386: Allow immediate as input to deposit
target/*: Use tcg_gen_negsetcond_*
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmTnoP4dHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV80MAf+NCEN7bwqGWmWGtfz
# YGXp6J51rDwOWVVzTZDv2Gtkc4/Cv0wwtLk4JT5Sg/LQur3tie/bgqOY1SBb4cRq
# UC1ERk3oqvmh8+aUqCc2SsncVtBduxAMqdlIhuD886SuZHgdry5cp2/MaOEFL/Un
# yQoKl238OzTmIuKnf4p/NnfD4PZxEtzKy9vQyHKswDH5f2+egaqpmKOL/6Xtl8rL
# 2nXPbd1UTlMu/QLlQ/CLKcW3Z9eBNrYDSQV1+K2J5ZjSFey8H5RUv3UAfqRpY00b
# EObcNCMSc6D9bpb2p34QENZNh9GiHE9Stg9VGNFOGilaaMxoa6yowlgz9Dz9xlWN
# OHG1ug==
# =ed8f
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Aug 2023 14:27:10 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230823-2' of https://gitlab.com/rth7680/qemu: (48 commits)
tcg: spelling fixes
docs/devel/tcg-ops: fix missing newlines in "Host vector operations"
target/cris: Fix a typo in gen_swapr()
tcg/tcg-op: Document wswap_i64() byte pattern
tcg/tcg-op: Document hswap_i32/64() byte pattern
tcg/tcg-op: Document bswap64_i64() byte pattern
tcg/tcg-op: Document bswap32_i64() byte pattern
tcg/tcg-op: Document bswap32_i32() byte pattern
tcg/tcg-op: Document bswap16_i64() byte pattern
tcg/tcg-op: Document bswap16_i32() byte pattern
tcg/i386: Implement negsetcond_*
tcg/i386: Use shift in tcg_out_setcond
tcg/i386: Clear dest first in tcg_out_setcond if possible
tcg/i386: Use CMP+SBB in tcg_out_setcond
tcg/i386: Merge tcg_out_movcond{32,64}
tcg/i386: Merge tcg_out_setcond{32,64}
tcg/i386: Merge tcg_out_brcond{32,64}
tcg/sparc64: Implement negsetcond_*
tcg/s390x: Implement negsetcond_*
tcg/riscv: Implement negsetcond_*
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* separate accepted and auto-installed versions of Python dependencies
* bump tricore container to Debian 11
* small configure cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmTsZ14UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMlVQf+Juomqo/luBwWwwguEZp32s+c+CYI
# HZJJJSIycq/VY2OsT9e+H1eMJYsCsdzJxn1NcnmEIUSMRkIuCxV5F62gaMl6BjgF
# tH8v4y1ZBDc0i0zw6qkuZM4sydNkK1XohGeOp8NkTE7F2fX0DT2AO17rSKIHh77R
# enNE5yq+s0YGHfYz7PbNvT1G+YXqt9SEEfCqIHkCQccjgFx9PEJu7PPuWdIYLG5s
# VVIyrbZzcX7OmQCCWdEZCe5t8swbOHtzE5D3JUVvfnUDj3BONXQybp/14rEikrjU
# fuy9sf3qW4XlwzPOUWFlPfxJIg8KWB1fL2wIppDn2gKrBB7fekwz5hlJRA==
# =lZmw
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 28 Aug 2023 05:22:38 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove unnecessary mkdir -p
configure: fix container_hosts misspellings and duplications
target/i386: add support for VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE
tests/docker: add python3-tomli dependency to containers
Revert "tests: Use separate virtual environment for avocado"
configure: switch to ensuregroup
python: use vendored tomli
configure: never use PyPI for Meson
lcitool: bump libvirt-ci submodule and regenerate
python: mkvenv: add ensuregroup command
python: mkvenv: introduce TOML-like representation of dependencies
python: mkvenv: tweak the matching of --diagnose to depspecs
dockerfiles: bump tricore cross compiler container to Debian 11
configure: fix and complete detection of tricore tools
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
https://github.com/hdeller/qemu-hppa into staging
target/hppa: Clean up conversion from/to MMU index and privilege level
Make the conversion between privilege level and QEMU MMU index
consistent, and afterwards switch to MMU indices 11-15.
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZOtpFAAKCRD3ErUQojoP
# X0lxAPwKfsMZOO/e81XXLgxeEZ5R4yjtIelErvOWmMvBfxEDUwEA6HgJt4gOe1uR
# Dw7d+wTqr+CSOj5I87+sJYl1FmihzQU=
# =01eA
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 27 Aug 2023 11:17:40 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'devel-hppa-priv-cleanup2-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Switch to use MMU indices 11-15
target/hppa: Use privilege helper in hppa_get_physical_address()
target/hppa: Do not use hardcoded value for tlb_flush_*()
target/hppa: Add privilege to MMU index conversion helpers
target/hppa: Add missing PL1 and PL2 privilege levels
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Without it, we'd call preadv, then write with weird parameters, which is
clearly not ideal...
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: 770d8abae7 ("bsd-user/bsd-file.h: Meat of the write system calls")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230820045419.89691-1-imp@bsdimp.com>
|
|
Add glue to call the following syscalls to the freebsd_syscall:
freebsd11_getdents
getdirentries
freebsd11_getdirentries
fcntl
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Add glue to call the following syscalls to the freebsd_syscall:
freebsd11_statfs
statfs
freebsd11_fstatfs
fstatfs
freebsd11_getfsstat
getfsstat
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Add glue to call the following syscalls to the freebsd_syscall:
getfh
lgetfh
fhopen
freebsd11_fhstat
freebsd11_fhstatfs
fhstat
fhstatfs
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Add glue to call the freebsd11_stat syscalls to the freebsd_syscall:
freebsd11_stat
freebsd11_lstat
freebsd11_fstat
freebsd11_fstatat
freebsd11_nstat, freebsd11_nfstat, freebsd11_nlstat
fstatat
fstat
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Forward declaration of the nstat syscalls:
nstat
nlstat
nfstat
Co-authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the freebsd11 variant of the following syscalls:
getdirentries(2)
Co-authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the freebsd11 variant of the following syscalls:
statfs(2)
fstatfs(2)
getfsstat(2)
Co-authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the freebsd11 variant of the following syscalls:
fstat(2)
fstatat(2)
fhstat(2)
fhstatfs(2)
Co-authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Rename the following syscalls to the freebsd11 variant:
do_freebsd_lstat -> do_freebsd11_lstat
do_freebsd_stat -> do_freebsd11_stat
Co-authored-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the following syscalls:
fcntl(2)
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the following syscalls:
getdents(2)
getdirecentries(2)
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the following syscalls:
statfs(2)
fstatfs(2)
getfsstat(2)
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the following syscalls:
getfh(2)
lgetfh(2)
fhopen(2)
fhstat(2)
fhstatfs(2)
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the following syscalls:
stat(2)
lstat(2)
fstat(2)
fstatat(2)
nstat
nfstat
nlstat
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
They are the 64-bit variants of h2t_freebsd11_stat and
h2t_freebsd11_statfs, respectively
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the stat conversion functions:
target_to_host_fcntl_cmd
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the stat conversion functions:
h2t_freebds11_statfs
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the stat conversion functions:
h2t_freebsd_fhandle
t2h_freebsd_fhandle
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Implement the stat conversion functions:
h2t_freebsd11_stat
h2t_freebsd_nstat
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
This is necessary for future code using target_time_t, in
bsd-user/syscall_defs.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Add struct target_freebsd_fhandle and fcntl flags to
bsd-user/syscall_defs.h
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Add struct target_statfs to bsd-user/syscall_defs.h
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Add structs target_freebsd11_nstat and target_freebsd11_statfs to
bsd-user/syscall_defs.h
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Singed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Declarations of functions that convert between host and target structs.
Co-authored-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Use __builtin_choose_expr to avoid type promotion from ?:
in __put_user_e and __get_user_e macros.
Copied from linux-user/qemu.h, originally by Blue Swirl.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Implement PRAGMA_DISABLE_PACKED_WARNING and
PRAGMA_REENABLE_PACKED_WARNING macros in include/qemu/compiler.h.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
move _WANT_FREEBSD macros from bsd-user/freebsd/os-syscall.c to
include/qemu/osdep.h in order to pull some struct defintions needed
later in the build.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This has the same value is image_info.brk, which is also logged,
and is otherwise unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230818175736.144194-4-richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
This value is unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230818175736.144194-3-richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
The start_mmap value is write-only.
Remove the field and the defines that populated it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230818175736.144194-2-richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
It is already included in the symlink shell function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
container_hosts is matched against $cpu, so it must contain QEMU
canonical architecture names, not Debian architecture names.
Also do not set $container_hosts inside the loop, since it is
already set before.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Current QEMU can expose waitpkg to guests when it is available. However,
VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE is still not recognized and
masked by QEMU. This can lead to an unexpected situation when a L1
hypervisor wants to expose waitpkg to a L2 guest. The L1 hypervisor can
assume that VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE exists as waitpkg is
available. The L1 hypervisor then can accidentally expose waitpkg to the
L2 guest. This will cause invalid opcode exception in the L2 guest when
it executes waitpkg related instructions.
This patch adds VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE support, and
sets up dependency between the bit and CPUID_7_0_ECX_WAITPKG. QEMU should
not expose waitpkg feature if VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE is
not available to avoid unexpected invalid opcode exception in L2 guests.
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-ID: <20230807093339.32091-2-ake@igel.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of having CI pick tomli from the vendored wheel at configure
time, place it in the containers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This reverts commit e8e4298feadae7924cf7600bb3bcc5b0a8d7cbe9.
ensuregroup allows to specify both the acceptable versions of avocado,
and a locked version to be used when avocado is not installed as a system
pacakge. This lets us install avocado in pyvenv/ using "mkvenv.py" and
reuse the distro package on Fedora and CentOS Stream (the only distros
where it's available).
ensuregroup's usage of "(>=..., <=...)" constraints when evaluating
the distro package, and "==" constraints when installing it from PyPI,
makes it possible to avoid conflicts between the known-good version and
a package plugins included in the distro.
This is because package plugins have "==" constraints on the version
that is included in the distro, and, using "pip install avocado==88.1"
on a venv that includes system packages will result in an error:
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
But at the same time, if the venv does not include a system distribution
of avocado then we can install a known-good version and stick to LTS
releases.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1663
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Using the new ensuregroup command, the desired versions of meson and
sphinx can be placed in pythondeps.toml rather than configure.
The meson.install entry in pythondeps.toml matches the version that is
found in python/wheels. This ensures that mkvenv.py uses the bundled
wheel even if PyPI is enabled; thus not introducing warnings or errors
from versions that are more recent than the one used in CI.
The sphinx entries match what is shipped in Fedora 38. It's the
last release that has support for older versions of Python (sphinx 6.0
requires Python 3.8) and especially docutils (of which sphinx 6.0 requires
version 0.18). This is important because Ubuntu 20.04 has docutils 0.14
and Debian 11 has docutils 0.16.
"mkvenv.py ensure" is only used to bootstrap tomli.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Debian only introduced tomli in the bookworm release. Use a
vendored wheel to avoid requiring a package that is only in
bullseye-backports and is also absent in Ubuntu 20.04.
While at it, fix an issue in the vendor.py scripts which does
not add a newline after each package and hash.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since there is a vendored copy, there is no point in choosing online
operation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This brings in a newer version of the pipewire mapping, so rename it.
Python 3.9 and 3.10 do not seem to work in OpenSUSE LEAP 15.5 (weird,
because 3.9 persisted from 15.3 to 15.4) so bump the Python runtime
version to 3.11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
