aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-08target-arm: Implement vCPU reset via KVM_ARM_VCPU_INIT for 32-bit CPUsPeter Maydell
Implement kvm_arm_vcpu_init() as a simple call to arm_arm_vcpu_init() (which uses the KVM_ARM_VCPU_INIT vcpu ioctl to tell the kernel to re-initialize the vCPU), rather than via the complicated code which saves a copy of the register state on first init and then writes it back to the kernel. This is much simpler and brings the 32-bit KVM code into line with the 64-bit code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1403802973-20841-1-git-send-email-peter.maydell@linaro.org
2014-07-08hw/arm/vexpress: Alias NOR flash at 0 for vexpress-a9Peter Maydell
Make the vexpress-a9 board alias the first NOR flash region at address zero, like vexpress-a15. This makes "-bios" actually usable on this board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1404310070-3561-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
2014-07-08disas/libvixl: prepend the include path of libvixl header filesStefano Stabellini
Currently the Makefile of disas/libvixl appends -I$(SRC_PATH)/disas/libvixl to QEMU_CFLAGS. As a consequence C++ files that #include "utils.h", such as disas/libvixl/a64/instructions-a64.cc, are going to look for utils.h on all the other include paths first. When building QEMU as part of the Xen make system, another unrelated utils.h file is going to be chosen for inclusion, causing a build failure: In file included from disas/libvixl/a64/instructions-a64.cc:27:0: /qemu/disas/libvixl/a64/instructions-a64.h:88:64: error: 'rawbits_to_float' was not declared in this scope const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000); Fix the problem by prepending (rather than appending) the libvixl include path to QEMU_CFLAGS. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-08Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2014-07-08 A few bug fixes for 2.1: - Fix e500* TLB emulation with qemu-system-ppc - Update SLOF to current upstream (good number of bugfixes) - Make POWER7 / POWER8 PVR match more agnostic (needed in 2.1 for cmdline compat) - Fix u-boot.e500 install (how did that happen?) - Fix H_CAS on LE hosts - ppc64le-linux-user fixes # gpg: Signature made Tue 08 Jul 2014 11:18:58 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: PPC: e500: Actually install u-boot.e500 target-ppc: Remove POWER7+ and POWER8E families target-ppc: Add pvr_match() callback pseries: Update SLOF firmware image to qemu-slof-20140630 PPC: Fix booke206 TLB with phys addrs > 32bit target-ppc: Fix gdbstub for ppc64le-linux-user target-ppc: Change default cpu for ppc64le-linux-user target-ppc: KVMPPC_H_CAS fix cpu-version endianess Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-08PPC: e500: Actually install u-boot.e500Cole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08target-ppc: Remove POWER7+ and POWER8E familiesAlexey Kardashevskiy
POWER8E is architecturally equal to POWER8 and POWER7+ is equal to POWER7. Also no user space tool makes any difference for CPU node name in the device tree (such as PowerPC,POWER7@0 vs. PowerPC,POWER7+@0). So there is no point in emulating POWER7+ and POWER8E apart from POWER7 and POWER8. Also, the previos patch implemented multiple PVR mask support per CPU class so POWER7 class now covers both POWER7 and POWER7+ CPUs, same is valid for POWER8/8E. This removes POWER7+ and POWER8E classes. This replaces references to POWER7P/POWER8E families with POWER7/POWER8 families. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08target-ppc: Add pvr_match() callbackAlexey Kardashevskiy
So far it was enough to have a base PVR value and mask per CPU family such as POWER7 or POWER8. However there CPUs which are completely architecturally compatible but have different PVRs such as POWER7/POWER7+ and POWER8/POWER8E. For these CPUs, top 16 bits are CPU family and low 16 bits are the version. The families have PVR base values different enough so defining a mask which would cover both (or potentially more) CPUs within the family is not possible. This adds a pvr_match() callback to PowerPCCPUClass. The default handler simply compares PVR defined in the class. This implements ppc_pvr_match_power7/ppc_pvr_match_power8 callbacks for POWER7/8 families. These check for POWER7/POWER7+ and POWER8/POWER8E. This changes ppc_cpu_compare_class_pvr_mask() not to check masks but use the pvr_match() callback. Since all server CPUs use the same mask, this defines one mask value - CPU_POWERPC_POWER_SERVER_MASK - which is used everywhere now. This removes other mask definitions. This removes pvr_mask from PowerPCCPUClass as it is not used anymore. This removes pvr initialization for POWER7/8 families as it is not used to find the class, the pvr_match() callback is used instead. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08pseries: Update SLOF firmware image to qemu-slof-20140630Alexey Kardashevskiy
The changelog is: > Quieten the grub warning > Add boot menu support > boot from disk having chrp-boot file > fat16: fix read and remove debug messages > dhcparch define missing in compilation > pci-scan: reserve memory for pci-bridge without devices > pci-bridge: Fix ranges when no device beyond the bridge > Set dhcp arch in board-qemu config file > xhci: fix controller stop > dhcp: support client architecture code 93 > virtio-blk: support variable block size > usb: use common pci dma alloc/mapping routines > Remove unused SLOF code > pci-bridge: generic bridge needs to support pci dma functions > pci: extract dma functions as separate file > e1000: fix usage of multiple nics Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08PPC: Fix booke206 TLB with phys addrs > 32bitAlexander Graf
We were truncating physical addresses to 32bit when using qemu-system-ppc with a booke206 TLB implementation. This patch fixes that and makes the full address space available. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08target-ppc: Fix gdbstub for ppc64le-linux-userRichard Henderson
The bswap that's needed for system mode isn't required for user mode, and in fact breaks debugging. Signed-off-by: Richard Henderson <rth@twiddle.net> [agraf: fix apple gdbstub implementation] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08target-ppc: Change default cpu for ppc64le-linux-userRichard Henderson
The default, 970fx, doesn't support MSR_LE. So even though we set LE in ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a user-selected cpu model doesn't support LE. Signed-off-by: Richard Henderson <rth@twiddle.net> [agraf: switch to POWER7 as default for BE and LE] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-08target-ppc: KVMPPC_H_CAS fix cpu-version endianessLaurent Dufour
During KVMPPC_H_CAS processing, the cpu-version updated value is stored without taking care of the current endianess. As a consequence, the guest may not switch to the right CPU model, leading to unexpected results. If needed, the value is now converted. Fixes: 6d9412ea8132 ("target-ppc: Implement "compat" CPU option") Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-07Merge remote-tracking branch 'remotes/afaerber/tags/prep-for-2.1' into stagingPeter Maydell
PowerPC Reference Platform (PReP) * Update OpenHack'Ware firmware to replace QEMU-side workarounds # gpg: Signature made Mon 07 Jul 2014 15:49:42 BST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/prep-for-2.1: prep: Update ppc_rom.bin prep: Remove CPU reset entry point hack related to OpenHack'Ware prep: Remove PCI memory hack related to OpenHack'Ware Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,vhost,virtio fixes, test Bugfixes all over the place. There's a non bugfix here: re-enabling the vhost-user test, though the patch just brings back functionality that I disabled earlier to fix mingw build failures. This is now sorted, and keeping the unit test enabled seems important since the feature relies on an external server to work, so isn't easy to test. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 06 Jul 2014 11:01:35 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: qemu-char: add chr_add_watch support in mux chardev virtio-pci: fix MSI memory region use after free qdev: Fix crash when using non-device class name on -global qdev: Don't abort() in case globals can't be set hw/virtio: enable common virtio feature for mmio device acpi: fix typo in memory hotplug MMIO region name pci: assign devfn to pci_dev before calling pci_device_iommu_address_space() Handle G_IO_HUP in tcp_chr_read for tcp chardev virtio: move common virtio properties to bus class device pc-dimm: error out if memory hotplug is not enabled numa: check for busy memory backend qtest: enable vhost-user-test Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07prep: Update ppc_rom.binAndreas Färber
This replaces QEMU-side workarounds for PCI BARs and CPU reset. Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-07-07prep: Remove CPU reset entry point hack related to OpenHack'WareHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-07-07prep: Remove PCI memory hack related to OpenHack'WareHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-07-07Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Block pull request # gpg: Signature made Mon 07 Jul 2014 13:27:20 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: qmp: show QOM properties in device-list-properties dataplane: submit I/O as a batch linux-aio: implement io plug, unplug and flush io queue block: block: introduce APIs for submitting IO as a batch ahci: map memory via device's address space instead of address_space_memory raw-posix: Fix raw_getlength() to always return -errno on error qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtin ahci.c: mask unused flags when reading size PRDT DBC MAINTAINERS: add Stefan Hajnoczi to IDE maintainers mirror: Fix qiov size for short requests Fix nocow typos in manpage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07Merge remote-tracking branch 'remotes/sstabellini/xen_arm_20140707' into stagingPeter Maydell
* remotes/sstabellini/xen_arm_20140707: xen: build on ARM xen_backend: introduce xenstore_read_uint64 and xenstore_read_fe_uint64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07xen: build on ARMStefano Stabellini
Collection of fixes to build QEMU with Xen support on ARM: - use xenstore_read_fe_uint64 to retrieve the page-ref (xenfb); - use xen_pfn_t instead of unsigned long in xenfb; - unsigned long/xenpfn_t in xen_remove_from_physmap; - in xen-mapcache.c use HOST_LONG_BITS to check for QEMU's address space size. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07xen_backend: introduce xenstore_read_uint64 and xenstore_read_fe_uint64Stefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07qmp: show QOM properties in device-list-propertiesStefan Hajnoczi
Devices can use a mix of qdev and QOM properties. Currently only the qdev properties are displayed by device-list-properties. This patch extends the property enumeration algorithm to also display QOM properties (excluding the implicit "type", "realized", "hotpluggable", and "parent_bus" properties). When a qdev property exists, use the qdev type name to preserve backwards compatibility. QOM type names can be different for bool (qdev on/off) and str (used by qdev pointers). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07dataplane: submit I/O as a batchMing Lei
Before commit 580b6b2aa2(dataplane: use the QEMU block layer for I/O), dataplane for virtio-blk submits block I/O as a batch. This commit 580b6b2aa2 replaces the custom linux AIO implementation(including submit I/O as a batch) with QEMU block layer, but this commit causes ~40% throughput regression on virtio-blk performance, and removing submitting I/O as a batch is one of the causes. This patch applies the newly introduced bdrv_io_plug() and bdrv_io_unplug() interfaces to support submitting I/O at batch for Qemu block layer, and in my test, the change can improve throughput by ~30% with 'aio=native'. Following my fio test script: [global] direct=1 size=4G bsrange=4k-4k timeout=40 numjobs=4 ioengine=libaio iodepth=64 filename=/dev/vdc group_reporting=1 [f] rw=randread Result on one of my small machine(host: x86_64, 2cores, 4thread, guest: 4cores): - qemu master: 65K IOPS - qemu master with these patches: 92K IOPS - 2.0.0 release(dataplane using custom linux aio): 104K IOPS Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07linux-aio: implement io plug, unplug and flush io queueMing Lei
This patch implements .bdrv_io_plug, .bdrv_io_unplug and .bdrv_flush_io_queue callbacks for linux-aio Block Drivers, so that submitting I/O as a batch can be supported on linux-aio. [Unprocessed requests are completed with -EIO instead of a bogus ret value. --Stefan] Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07block: block: introduce APIs for submitting IO as a batchMing Lei
This patch introduces three APIs so that following patches can support queuing I/O requests and submitting them as a batch for improving I/O performance. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07ahci: map memory via device's address space instead of address_space_memoryLe Tan
In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(), because ahci devices should not access memory directly but via their address space. Add an AddressSpace parameter to map_page(). In order to call map_page(), we should pass the AHCIState.as as the AddressSpace argument. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07raw-posix: Fix raw_getlength() to always return -errno on errorMarkus Armbruster
We got a merry mix of -1 and -errno here. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtinBenoît Canet
This avoid breaking tests on RHEL6 where gnutls is too old for quorum to be built by default. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07ahci.c: mask unused flags when reading size PRDT DBCReza Jelveh
The data byte count(DBC) read from the description information is defined for bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion (I) flag. Completion interrupts are triggered after every transaction instead of on I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the DBC leads to a negative offset that causes sglist allocation to fail. Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07MAINTAINERS: add Stefan Hajnoczi to IDE maintainersStefan Hajnoczi
Make Stefan officially co-maintain hw/ide/ with Kevin. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2014-07-07mirror: Fix qiov size for short requestsKevin Wolf
When mirroring an image of a size that is not a multiple of the mirror job granularity, the last request would have the right nb_sectors argument, but a qiov that is rounded up to the next multiple of the granularity. Don't do this. This fixes a segfault that is caused by raw-posix being confused by this and allocating a buffer with request length, but operating on it with qiov length. [s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric --Stefan] Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07Fix nocow typos in manpageChunyan Liu
Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-06qemu-char: add chr_add_watch support in mux chardevKirill Batuzov
Forward chr_add_watch call from mux chardev to underlying implementation. This should fix bug #1335444 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06virtio-pci: fix MSI memory region use after freePaolo Bonzini
After memory region QOMification QEMU is stricter in detecting wrong usage of the memory region API. Here it detected a memory_region_destroy done before the corresponding memory_region_del_subregion; the memory_region_destroy is done by msix_uninit_exclusive_bar, the memory_region_del_subregion is done by the PCI core's pci_unregister_io_regions before pc->exit is called. The problem was introduced by commit 06a1307379fcd6c551185ad87679cd7ed896b9ea virtio-pci: add device_unplugged callback As noted in that commit log, virtio device kick callbacks need to be stopped before generic virtio is cleaned up. This is because these are notifications from pci proxy to the generic virtio device so they need to be stopped in the unplug call before the virtio device is unrealized. However interrupts are notifications from the virtio device to the pci proxy so they need to stay around while the device is realized. The memory API misuse caused an assertion when hot-unplugging virtio devices. Using the API correctly fixes the assertion. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06qdev: Fix crash when using non-device class name on -globalEduardo Habkost
This fixes the following crash: $ qemu-system-x86_64 -global container.xxx=y hw/core/qdev-properties-system.c:399:qdev_add_one_global: Object 0x7f7eff234100 is not an instance of type device Aborted (core dumped) New behavior will be to just warn, just like when non-existing clas names are used: $ qemu-system-x86_64 -global container.xxx=y qemu-system-x86_64: Warning: "-global container.xxx=y" not used Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-by: Don Slutz <dslutz@verizon.com>
2014-07-06qdev: Don't abort() in case globals can't be setEduardo Habkost
It would be much better if we didn't terminate QEMU inside device_post_init(), but at least exiting cleanly is better than aborting and dumping core. Before this patch: $ qemu-system-x86_64 -global cpu.xxx=y qemu-system-x86_64: Property '.xxx' not found Aborted (core dumped) After this patch: $ qemu-system-x86_64 -global cpu.xxx=y qemu-system-x86_64: Property '.xxx' not found Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2014-07-06hw/virtio: enable common virtio feature for mmio deviceMing Lei
Both 'indirect_desc' and 'event_idx' are bus independent features, and they should be enabled for mmio devices too. On arm64 quad core VM(qemu-kvm), the patch can increase block I/O performance a lot with latest linux tree: - without the patch: 14K IOPS - with the patch: 34K IOPS fio script: [global] direct=1 bsrange=4k-4k timeout=10 numjobs=4 ioengine=libaio iodepth=64 filename=/dev/vdc group_reporting=1 [f1] rw=randread Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06acpi: fix typo in memory hotplug MMIO region nameIgor Mammedov
Reported-by: Sergey Fionov <fionov@gmail.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-06pci: assign devfn to pci_dev before calling pci_device_iommu_address_space()Le Tan
In function do_pci_register_device() in file hw/pci/pci.c, move the assignment of pci_dev->devfn to the position before the call to pci_device_iommu_address_space(pci_dev) which will use the value of pci_dev->devfn. Fixes: 9eda7d373e9c691c070eddcbe3467b991f67f6bd pci: Introduce helper to retrieve a PCI device's DMA address space Cc: qemu-stable@nongnu.org Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06Handle G_IO_HUP in tcp_chr_read for tcp chardevKirill Batuzov
Since commit cdaa86a54b232572bba594bf87a7416e527e460c ("Add G_IO_HUP handler for socket chardev") GLib limitation results in a bug on Windows host. Steps to reproduce: Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait Connect with telnet: telnet 127.0.0.1 4444 Try sending some data from telnet. Expected result: answers from QEMU. Observed result: no answers (actually tcp_chr_read is not called at all). Due to GLib limitations it is not possible to create several watches on one channel on Windows hosts. See bug #338943 in GNOME bugzilla for details: https://bugzilla.gnome.org/show_bug.cgi?id=338943 This reimplements commit cdaa86a54b232572bba594bf87a7416e527e460c ("Add G_IO_HUP handler for socket chardev") using a single watch: Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a corresponding watch. Remove the second watch with its handler. Cc: Antonios Motakis <a.motakis@virtualopensystems.com> Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Signed-off-by: Nikita Belov <zodiac@ispras.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06virtio: move common virtio properties to bus class deviceMing Lei
The two common virtio features can be defined per bus, so move all into bus class device to make code more clean. As discussed with cornelia, s390-virtio-blk doesn't support the two features at all, so keep s390-virtio as it. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: rebase and resolve conflicts
2014-07-06pc-dimm: error out if memory hotplug is not enabledIgor Mammedov
fixes QEMU abort in case it's started without memory hotplug enabled. as result of fix it will print following messages: " -device pc-dimm,id=d1,memdev=m1: memory hotplug is not enabled, enable it on startup -device pc-dimm,id=d1,memdev=m1: Device 'pc-dimm' could not be initialized " Also fixup assert condition to detect hotplug address space overflow. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06numa: check for busy memory backendHu Tao
Specifying the same memory backend twice leads to an assert: ./x86_64-softmmu/qemu-system-x86_64 -m 512M -enable-kvm -object memory-backend-ram,size=256M,id=ram0 -numa node,nodeid=0,memdev=ram0 -numa node,nodeid=1,memdev=ram0 qemu-system-x86_64: /scm/qemu/memory.c:1506: memory_region_add_subregion_common: Assertion `!subregion->container' failed. Aborted (core dumped) Detect and exit with an error message instead. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06qtest: enable vhost-user-testNikolay Nikolaev
Use qtest-obj-y to get the right library order. CONFIG_POSIX ensures mingw compilation won't break. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: whitespace tweak
2014-07-03MAINTAINERS: seccomp: change email contact for Eduardo OtuboEduardo Otubo
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01Update version for v2.1.0-rc0 releasev2.1.0-rc0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01net: add mmsghdr struct check for L2TPV3Gonglei
The mmsghdr struct is only introduced in Linux 2.6.32; add a configure check for it and disable L2TPV3 on hosts which are too old to provide it, rather than simply failing to compile. Reported-by: chenliang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com [PMM: cleaned up commit message and corrected kernel version number] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20140701-1' into ↵Peter Maydell
staging usb bugfixes. # gpg: Signature made Tue 01 Jul 2014 14:51:19 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20140701-1: ccid-card-emulated: use EventNotifier usb: initialize libusb_device to avoid crash usb: Fix usb-bt-dongle initialization. input: fix jumpy mouse cursor with USB mouse emulation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20140701-1' into ↵Peter Maydell
staging vnc: two bugfixes (by Peter Lieven). # gpg: Signature made Tue 01 Jul 2014 12:32:19 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vnc-20140701-1: ui/vnc: fix potential memory corruption issues ui/vnc: limit client_cut_text msg payload size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01ccid-card-emulated: use EventNotifierPaolo Bonzini
Shut up Coverity's complaint about unchecked fcntl return values, and especially make the code simpler and more efficient. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-15 20:43:49 +0000