aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-08target-xtensa: implement ATOMCTL SRMax Filippov
ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory type. See ISA, 4.3.12.4 for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08Merge branch 'master' of git.qemu-project.org:/pub/git/qemuBlue Swirl
* 'master' of git.qemu-project.org:/pub/git/qemu: target-mips: Fix incorrect shift for SHILO and SHILOV target-mips: Fix incorrect code and test for INSV xilinx_uartlite: Accept input after rx FIFO pop xilinx_uartlite: suppress "cannot receive message" xilinx_axienet: Implement R_IS behaviour
2012-12-08finally kill cpudef config section supportEduardo Habkost
The external CPU models were removed on QEMU 1.2, and the support for the "cpudef" config sections was documented as deprecated, but the actual removal of the config section was pending. Now that QEMU 1.3 was released, we can finally kill the support for cpudef config sections, and support only the built-in CPU models from target-i386/cpu.c. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08Merge branch 'memory-ioport' of git://github.com/afaerber/qemu-cpuBlue Swirl
* 'memory-ioport' of git://github.com/afaerber/qemu-cpu: hw/dma.c: Replace register_ioport_* hw/pc.c: Replace register_ioport_* serial: Replace register_ioport_* hw/cirrus_vga.c: Replace register_ioport_* hw/apm.c: Replace register_ioport_* isa: Add isa_address_space_io()
2012-12-08HACKING: List areas where we may rely on impdef C behaviourPeter Maydell
Add a section to HACKING saying which version of the C spec we use and describing the bits of implementation defined C compiler behaviour which C code in QEMU is allowed to rely on. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08pixman: require 0.18.4 or newerGerd Hoffmann
When older versions are found the internal pixman version is prefered. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Remove unused global gen_opc_ arrays.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08tcg/tcg.h: Duplicate global TCG gen_opc_ arrays into TCGContext.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08curses: Remove OpenBSD workaroundBrad Smith
I removed the same sort of workaround for OpenBSD within the configure script with commit 4dcc3f5876fa638d5c35bd47be3b717ea74cc2e7 but didn't bother to grep further to come across this same chunk of code in the curses code itself. So the following diff removes the same workaround chunk within the curses code. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08exec: Advise huge pages for the TCG code gen bufferRichard Henderson
After allocating 32MB or more contiguous memory, huge pages would seem to be ideal. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-06target-mips: Fix incorrect shift for SHILO and SHILOVPetar Jovanovic
helper_shilo has not been shifting an accumulator value correctly for negative values in 'shift' field. Minor optimization for shift=0 case. This change also adds tests that will trigger issue and check for regressions. Signed-off-by: Petar Jovanovic <petarj@mips.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-06target-mips: Fix incorrect code and test for INSVPetar Jovanovic
Content of register rs should be shifted for pos before applying a mask. This change contains both fix for the instruction and to the existing test. Signed-off-by: Petar Jovanovic <petarj@mips.com> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-05xilinx_uartlite: Accept input after rx FIFO popPeter Crosthwaite
The device return false from the can receive function when the FIFO is full. This mean the device should check for buffered input whenever a byte is popped from the FIFO. Reported-by: Jason Wu <huanyu@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-12-05xilinx_uartlite: suppress "cannot receive message"Peter Crosthwaite
This message is not an error condition, its just informing the user that the device is corking the uart traffic to not drop characters. Reported-by: Jason Wu <huanyu@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-12-05xilinx_axienet: Implement R_IS behaviourPeter Crosthwaite
The interrupt status register R_IS is the standard clear-on-write behaviour. This was unimplemented and defaulting to updating the register to the written value. Implemented clear-on-write. Reported-by: Jason Wu <huanyu@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-12-04hw/dma.c: Replace register_ioport_*Julien Grall
Replace all register_ioport_*() with the new Memory API functions. This permits to use the new Memory stuff like listeners. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> [AF: Rebased onto hwaddr] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-04hw/pc.c: Replace register_ioport_*Julien Grall
Replace all register_ioport_*() with portio_*() or a MemoryRegion. This permits to use the new Memory stuff like listeners. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> [AF: Rebased onto hwaddr] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-04serial: Replace register_ioport_*Julien Grall
Replace all register_ioport_*() with a MemoryRegion. This permits to use the new Memory stuff like listeners. For more flexibility, the IO address space is passed as an argument. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> [AF: Rebased onto serial split] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-04hw/cirrus_vga.c: Replace register_ioport_*Julien Grall
Replace all register_ioport_*() with the new Memory API. This permits to use the new Memory stuff like listeners. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> [AF: Rebased onto hwaddr] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-04hw/apm.c: Replace register_ioport_*Julien Grall
Replace all register_ioport_*() with a MemoryRegion. This permits to use the new Memory stuff like listeners. Moreover, the PCI device is added as an argument for apm_init(), so we can register IO inside the PCI IO address space. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> [AF: Rebased onto hwaddr and q35] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-04isa: Add isa_address_space_io()Julien Grall
This function permits to retrieve ISA IO address space. It will be usefull when we need to pass IO address space as argument. Signed-off-by: Julien Grall <julien.grall@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-03Open up 1.4 development branchAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-03Update version for 1.3.0 releasev1.3.0Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-03e1000: Discard packets that are too long if !SBP and !LPEMichael Contreras
The e1000_receive function for the e1000 needs to discard packets longer than 1522 bytes if the SBP and LPE flags are disabled. The linux driver assumes this behavior and allocates memory based on this assumption. Signed-off-by: Michael Contreras <michael@inetric.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Update version for 1.3.0-rc2v1.3.0-rc2Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Merge remote-tracking branch 'kraxel/seabios-b1c35f2' into stagingAnthony Liguori
* kraxel/seabios-b1c35f2: seabios: update binaries in pc-bios/ roms: also copy the dsdt when updating seabios. seabios: update to b1c35f2b28cc0c94ebed8176ff61ac0e0b377798 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: coroutine-sigaltstack.c: Use stack_t, not struct sigaltstack stream: fix ratelimit_set_speed atapi: make change media detection for guests easier Documentation: Update image format information Documentation: Update block cache mode information Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Merge remote-tracking branch 'spice/spice.v65' into stagingAnthony Liguori
* spice/spice.v65: qxl: reload memslots after migration, when qxl is in UNDEFINED mode Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Merge remote-tracking branch 'kraxel/usb.73' into stagingAnthony Liguori
* kraxel/usb.73: ehci-sysbus: Attach DMA context. usb: fail usbdevice_create() when there is no USB bus usb: tag usb host adapters as not hotpluggable. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: qapi: fix qapi_dealloc_type_size parameter type Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30seabios: update binaries in pc-bios/Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-30roms: also copy the dsdt when updating seabios.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-30Revert "audio/wavcapture: Clarify licensing"Anthony Liguori
This reverts commit 456a84d156a7c42f18b1da176dd6219e2dffd043. This patch wasn't submitted to the list and did not get Acked by other copyright holders in the file. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30Revert "audio/audio_pt_int: Clarify licensing"Anthony Liguori
This reverts commit 72bc6f1bf710e205f175af9b1fc8bbd83e8da71f. This patch wasn't submitted to the list and did not get Acked by other copyright holders in the file. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30seabios: update to b1c35f2b28cc0c94ebed8176ff61ac0e0b377798Gerd Hoffmann
This patch updates the seabios submodule to commit b1c35f2b28cc0c94ebed8176ff61ac0e0b377798. Most important change is that seabios sets the busmaster bit in the pci config space for the lsi and esp scsi host adapters. Since commit 1c380f9460522f32c8dd2577b2a53d518ec91c6d qemu is strict here and disallows any dma access when the bit is clear. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-30multiboot: fix e801 memory mapPaolo Bonzini
The e801 memory sizes in the multiboot structures hard-code the available low memory to 640. However, the value should not include the size of the EBDA. Fill the value in the option ROM, getting the size of low memory from the BIOS. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30seccomp: adding new syscalls (bugzilla 855162)Eduardo Otubo
According to the bug 855162[0] - there's the need of adding new syscalls to the whitelist when using Qemu with Libvirt. [0] - https://bugzilla.redhat.com/show_bug.cgi?id=855162 Reported-by: Paul Moore <pmoore@redhat.com> Tested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com> Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-30coroutine-sigaltstack.c: Use stack_t, not struct sigaltstackPeter Maydell
Use the POSIX-specified stack_t type as the argument to sigaltstack() rather than the legacy struct sigaltstack. This allows us to compile on MacOSX with --with-coroutine=sigaltstack. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-30stream: fix ratelimit_set_speedDietmar Maurer
The formula to compute slice_quota was wrong since commit 6ef228fc. Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-30atapi: make change media detection for guests easierPavel Hrdina
If you have a guest with a media in the optical drive and you change it, the windows guest cannot properly recognize this media change. Windows needs to detect sense "NOT_READY with ASC_MEDIUM_NOT_PRESENT" before we send sense "UNIT_ATTENTION with ASC_MEDIUM_MAY_HAVE_CHANGED". Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-11-30Documentation: Update image format informationKevin Wolf
Document new and yet undocumented options and image formats. The qemu-img man page contains information only for raw and qcow2 now and references the HTML documentation for a more detailed description of other formats. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-30Documentation: Update block cache mode informationKevin Wolf
Somehow we forgot to update this when cache=writeback became the default. While changing the information on the default, also make the description of all caches modes a bit more accurate. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-29virtio: limit avail bytes lookaheadMichael S. Tsirkin
Commit 0d8d7690850eb0cf2b2b60933cf47669a6b6f18f introduced a regression in virtio-net performance because it looks into the ring aggressively while we really only care about a single packet worth of buffers. Reported as bugzilla 1066055 in launchpad. To fix, add parameters limiting lookahead, and use in virtqueue_avail_bytes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Tested-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-29qemu-tech.texi: update implemented xtensa features listMax Filippov
Debug option is available since QEMU-1.2; FP coprocessor and coprocessor context is available since QEMU-1.3. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-29qdev: relax bus type check in qdev_device_add() (v2)Anthony Liguori
We are currently checking for an exact type match. Use QOM dynamic_cast to check for a compatible type instead. Cc: Konrad Frederic <fred.konrad@greensocs.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2: - also add cast to qbus_find_recursive (Peter) - simplify by doing object_dynamic_cast instead of messing with classes
2012-11-29qapi: fix qapi_dealloc_type_size parameter typeBruce Rogers
The second parameter to qapi_dealloc_type_size should be a uint64_t *, not a size_t *. This was causing our 32 bit x86 build to fail, since warnings are treated as errors. Signed-off-by: Bruce Rogers <brogers@suse.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-11-29ehci-sysbus: Attach DMA context.Peter Crosthwaite
This was left as NULL on the initial merge due to debate on the mailing list on how to handle DMA contexts for sysbus devices. Patch 9e11908f12f92e31ea94dc2a4c962c836cba9f2a was later merged to fix OHCI. This is the, equivalent fix for sysbus EHCI. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 20:46:22 +0000