aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-21hw: Move i.MX watchdog driver to hw/watchdogGuenter Roeck
In preparation for a full implementation, move i.MX watchdog driver from hw/misc to hw/watchdog. While at it, add the watchdog files to MAINTAINERS. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200517162135.110364-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21target/arm: Remove unused GEN_NEON_INTEGER_OP macroPeter Maydell
The GEN_NEON_INTEGER_OP macro is no longer used; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-21linux-user/arm: Fix identification of syscall numbersPeter Maydell
Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
2020-05-21linux-user/arm: Handle invalid arm-specific syscalls correctlyPeter Maydell
The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
2020-05-21linux-user/arm: Remove bogus SVC 0xf0002 handlingPeter Maydell
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
2020-05-21linux-user/arm: BKPT should cause SIGTRAP, not be a syscallPeter Maydell
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21docs/system: Document Musca boardsPeter Maydell
Provide a minimal documentation of the Musca boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-6-peter.maydell@linaro.org
2020-05-21docs/system: Document the various MPS2 modelsPeter Maydell
Add basic documentation of the MPS2 board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-5-peter.maydell@linaro.org
2020-05-21docs/system: Document Arm Versatile Express boardsPeter Maydell
Provide a minimal documentation of the Versatile Express boards (vexpress-a9, vexpress-a15). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-4-peter.maydell@linaro.org
2020-05-21docs/system: Sort Arm board index into alphabetical orderPeter Maydell
Sort the board index into alphabetical order. (Note that we need to sort alphabetically by the title text of each file, which isn't the same ordering as sorting by the filename.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-3-peter.maydell@linaro.org
2020-05-21docs/system: Add 'Arm' to the Integrator/CP document titlePeter Maydell
Add 'Arm' to the Integrator/CP document title, for consistency with the titling of the other documentation of Arm devboard models (versatile, realview). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200507151819.28444-2-peter.maydell@linaro.org
2020-05-21tests/acceptance: Add a test for the canon-a1100 machineThomas Huth
The canon-a1100 machine can be used with the Barebox firmware. The QEMU Advent Calendar 2018 features a pre-compiled image which we can use for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200514190422.23645-1-f4bug@amsat.org Message-Id: <20200129090420.13954-1-thuth@redhat.com> [PMD: Rebased MAINTAINERS] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/socket-next-pull-request' into staging Add support for UNIX sockets in the abstract namespace # gpg: Signature made Wed 20 May 2020 13:58:43 BST # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/socket-next-pull-request: qemu-options: updates for abstract unix sockets tests/util-sockets: add abstract unix socket cases qemu-sockets: add abstract UNIX domain socket support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch 'remotes/kraxel/tags/ui-20200520-pull-request' ↵Peter Maydell
into staging ui: windows keyboard fixes for gtk & sdl. ui: require GTK 3.22 or newer. # gpg: Signature made Wed 20 May 2020 09:41:48 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20200520-pull-request: ui: increase min required GTK version to 3.22.0 ui/gtk: use native keyboard scancodes on Windows ui/gtk: don't pass on win keys without keyboard grab ui/sdl2-input: use trace-events to debug key events ui/sdl2: start in full screen with grab enabled ui/sdl2: fix handling of AltGr key on Windows ui/gtk: remove unused variable ignore_keys ui/gtk: remove unused code ui/gkt: release all keys on grab-broken-event ui/gtk: fix handling of AltGr key on Windows ui/win32-kbd-hook: handle AltGr in a hook procedure Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-05-18-v3' ↵Peter Maydell
into staging bitmaps patches for 2020-05-18 - update bitmaps maintainers - add 'qemu-img bitmap' subcommand # gpg: Signature made Tue 19 May 2020 18:53:59 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-bitmaps-2020-05-18-v3: qemu-img: Add bitmap sub-command blockdev: Split off basic bitmap operations for qemu-img blockdev: Promote several bitmap functions to non-static block: Make it easier to learn which BDS support bitmaps qemu-img: Fix stale comments on doc location docs: Sort sections on qemu-img subcommand parameters bitmaps: Update maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-20qemu-options: updates for abstract unix socketsxiaoqiang zhao
add options documents changes for -chardev Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-20tests/util-sockets: add abstract unix socket casesxiaoqiang zhao
add cases to test tight and non-tight for abstract address type Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-20qemu-sockets: add abstract UNIX domain socket supportxiaoqiang zhao
unix_listen/connect_saddr now support abstract address types two aditional BOOL switches are introduced: tight: whether to set @addrlen to the minimal string length, or the maximum sun_path length. default is TRUE abstract: whether we use abstract address. default is FALSE cli example: -monitor unix:/tmp/unix.socket,abstract,tight=off OR -chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-19Merge remote-tracking branch 'remotes/rth/tags/pull-fpu-20200519' into stagingPeter Maydell
Misc cleanups # gpg: Signature made Tue 19 May 2020 16:51:38 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-fpu-20200519: softfloat: Return bool from all classification predicates softfloat: Inline floatx80 compare specializations softfloat: Inline float128 compare specializations softfloat: Inline float64 compare specializations softfloat: Inline float32 compare specializations softfloat: Name compare relation enum softfloat: Name rounding mode enum softfloat: Change tininess_before_rounding to bool softfloat: Replace flag with bool softfloat: Use post test for floatN_mul Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-19qemu-img: Add bitmap sub-commandEric Blake
Include actions for --add, --remove, --clear, --enable, --disable, and --merge (note that --clear is a bit of fluff, because the same can be accomplished by removing a bitmap and then adding a new one in its place, but it matches what QMP commands exist). Listing is omitted, because it does not require a bitmap name and because it was already possible with 'qemu-img info'. A single command line can play one or more bitmap commands in sequence on the same bitmap name (although all added bitmaps share the same granularity, and and all merged bitmaps come from the same source file). Merge defaults to other bitmaps in the primary image, but can also be told to merge bitmaps from a distinct image. While this supports --image-opts for the file being modified, I did not think it worth the extra complexity to support that for the source file in a cross-file merges. Likewise, I chose to have --merge only take a single source rather than following the QMP support for multiple merges in one go (although you can still use more than one --merge in the command line); in part because qemu-img is offline and therefore atomicity is not an issue. Upcoming patches will add iotest coverage of these commands while also testing other features. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19softfloat: Return bool from all classification predicatesRichard Henderson
This includes *_is_any_nan, *_is_neg, *_is_inf, etc. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Inline floatx80 compare specializationsRichard Henderson
Replace the floatx80 compare specializations with inline functions that call the standard floatx80_compare{,_quiet} functions. Use bool as the return type. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Inline float128 compare specializationsRichard Henderson
Replace the float128 compare specializations with inline functions that call the standard float128_compare{,_quiet} functions. Use bool as the return type. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Inline float64 compare specializationsRichard Henderson
Replace the float64 compare specializations with inline functions that call the standard float64_compare{,_quiet} functions. Use bool as the return type. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Inline float32 compare specializationsRichard Henderson
Replace the float32 compare specializations with inline functions that call the standard float32_compare{,_quiet} functions. Use bool as the return type. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Name compare relation enumRichard Henderson
Give the previously unnamed enum a typedef name. Use it in the prototypes of compare functions. Use it to hold the results of the compare functions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Name rounding mode enumRichard Henderson
Give the previously unnamed enum a typedef name. Use the packed attribute so that we do not affect the layout of the float_status struct. Use it in the prototypes of relevant functions. Adjust switch statements as necessary to avoid compiler warnings. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Change tininess_before_rounding to boolRichard Henderson
Slightly tidies the usage within softfloat.c and the representation in float_status. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Replace flag with boolRichard Henderson
We have had this on the to-do list for quite some time. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19softfloat: Use post test for floatN_mulRichard Henderson
The existing f{32,64}_addsub_post test, which checks for zero inputs, is identical to f{32,64}_mul_fast_test. Which means we can eliminate the fast_test/fast_op hooks in favor of reusing the same post hook. This means we have one fewer test along the fast path for multiply. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-19blockdev: Split off basic bitmap operations for qemu-imgEric Blake
Upcoming patches want to add some basic bitmap manipulation abilities to qemu-img. But blockdev.o is too heavyweight to link into qemu-img (among other things, it would drag in block jobs and transaction support - qemu-img does offline manipulation, where atomicity is less important because there are no concurrent modifications to compete with), so it's time to split off the bare bones of what we will need into a new file block/monitor/bitmap-qmp-cmds.o. This is sufficient to expose 6 QMP commands for use by qemu-img (add, remove, clear, enable, disable, merge), as well as move the three helper functions touched in the previous patch. Regarding MAINTAINERS, the new file is automatically part of block core, but also makes sense as related to other dirty bitmap files. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-6-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19blockdev: Promote several bitmap functions to non-staticEric Blake
The next patch will split blockdev.c, which will require accessing some previously-static functions from more than one .c file. But part of promoting a function to public is picking a naming scheme that does not reek of exposing too many internals (two of the three functions were named starting with 'do_'). To make future code motion easier, perform the function rename and non-static promotion into its own patch. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-5-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19block: Make it easier to learn which BDS support bitmapsEric Blake
Upcoming patches will enhance bitmap support in qemu-img, but in doing so, it turns out to be nice to suppress output when persistent bitmaps make no sense (such as on a qcow2 v2 image). Add a hook to make this easier to query. This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap, rather than trying to shoehorn the answer in via existing callbacks. In particular, while it might have been possible to overload .bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to answer whether any persistent bitmaps are supported, that is at odds with whether a particular bitmap can be stored (for example, even on an image that supports persistent bitmaps but has currently filled up the maximum number of bitmaps, attempts to store another one should fail); and the new functionality doesn't require coroutine safety. Similarly, we could have added one more piece of information to .bdrv_get_info, but then again, most callers to that function tend to already discard extraneous information, and making it a catch-all rather than a series of dedicated scalar queries hasn't really simplified life. In the future, when we improve the ability to look up bitmaps through a filter, we will probably also want to teach the block layer to automatically let filters pass this request on through. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200513011648.166876-4-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19qemu-img: Fix stale comments on doc locationEric Blake
Missed in commit e13c59fa. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19docs: Sort sections on qemu-img subcommand parametersEric Blake
We already list the subcommand summaries alphabetically, we should do the same for the documentation related to subcommand-specific parameters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200513011648.166876-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-19bitmaps: Update maintainerEric Blake
Dirty bitmaps are important to incremental backups, including exposure over NBD where I'm already maintainer. Also, I'm aware that lately I have been doing as much code/review on bitmaps as John Snow who is trying to scale back in order to focus elsewhere; and many of the recent patches have come from Vladimir, who is also interested in taking on maintainer duties, but would like to start with co-maintainership. Therefore, it's time to revamp the ownership of this category, as agreed between the three of us. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200514180003.325406-1-eblake@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2020-05-19Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Tue 19 May 2020 09:00:32 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: aio-posix: disable fdmon-io_uring when GSource is used aio-posix: don't duplicate fd handler deletion in fdmon_io_uring_destroy() tests/fuzz: Extract ioport_fuzz_qtest() method tests/fuzz: Extract pciconfig_fuzz_qos() method tests/fuzz: Remove unuseful/unused typedefs tests/fuzz: Add missing space in test description Makefile: List fuzz targets in 'make help' tests/fuzz/Makefile: Do not link code using unavailable devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - Introduce real BdrvChildRole - blk/bdrv_make_empty() functions instead of calling callbacks directly - mirror: Make sure that source and target size match - block-copy: Fix uninitialized variable - block/replication: Avoid cancelling the job twice - ahci: Log lost IRQs - iotests: Run pylint and mypy in a testcase - iotests: log messages from notrun() # gpg: Signature made Mon 18 May 2020 18:05:32 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (52 commits) hw: Use QEMU_IS_ALIGNED() on parallel flash block size iotests/030: Reduce run time by unthrottling job earlier hw/ide/ahci: Log lost IRQs iotests: log messages from notrun() block/block-copy: Simplify block_copy_do_copy() block/block-copy: Fix uninitialized variable in block_copy_task_entry block: Drop @child_class from bdrv_child_perm() block: Pass BdrvChildRole in remaining cases block: Drop child_file block: Drop bdrv_format_default_perms() block: Make bdrv_filter_default_perms() static block: Use bdrv_default_perms() tests: Use child_of_bds instead of child_file block: Use child_of_bds in remaining places block: Make filter drivers use child_of_bds block: Make format drivers use child_of_bds block: Drop child_backing block: Make backing files child_of_bds children block: Drop child_format block: Switch child_format users to child_of_bds ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-19ui: increase min required GTK version to 3.22.0Volker Rümelin
Based on a mail on the qemu-devel mailing list at https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html and some internet research the GTK3 versions on supported platforms are: RHEL-7.4: 3.22.10 RHEL-7.5: 3.22.26 Debian (Stretch): 3.22.11 Debian (Buster): 3.24.5 OpenBSD (Ports): 3.22.30 FreeBSD (Ports): 3.22.29 OpenSUSE Leap 15: 3.22.30 SLE12-SP2: Unknown SLE15: 3.22.30 Ubuntu (Bionic): 3.22.30 Ubuntu (Focal): 3.24.18 macOS (Homebrew): 3.22.30 This justifies increasing the minimum required GTK version in QEMU to 3.22.0. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-11-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gtk: use native keyboard scancodes on WindowsVolker Rümelin
Since GTK 3.22 the function gdk_event_get_scancode() is available. On Windows this function returns keyboard scancodes and some extended flags. These raw keyboard scancodes are much better suited for this use case than the half-cooked win32 virtual-key codes because scancodes report the key position on the keyboard and the positions are independent of national language settings. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-10-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gtk: don't pass on win keys without keyboard grabVolker Rümelin
Without keyboard grab Windows currently handles the two win keys and the key events are also sent to the guest. This is undesir- able. Only one program should handle key events. This patch ap- plies commit c68f74b02e "win32: do not handle win keys when the keyboard is not grabbed" from project spice-gtk to ui/gtk.c to fix this problem. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-9-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/sdl2-input: use trace-events to debug key eventsVolker Rümelin
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-8-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/sdl2: start in full screen with grab enabledVolker Rümelin
QEMU with SDL 1.2 display used to enable keyboard and mouse grab- bing when started in full screen. The SDL 2.0 code tries to do the same but fails to enable grabbing because sdl_grab_start(0) returns early. To do it's work the sdl_grab_start() function needs a pointer to a sdl2_console structure. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-7-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/sdl2: fix handling of AltGr key on WindowsVolker Rümelin
Wire up the keyboard hooking code on Windows to fix the AltGr key and improve keyboard grabbing. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-6-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gtk: remove unused variable ignore_keysVolker Rümelin
Since the removal of GTK2 code in commit 89d85cde75 the code around ignore_keys is unused. See commit 1a01716a30 "gtk: Avoid accel key leakage into guest on console switch" why it was only needed for GTK2. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-5-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gtk: remove unused codeVolker Rümelin
This code was last used before commit 2ec78706d1 "ui: convert GTK and SDL1 frontends to keycodemapdb". Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-4-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gkt: release all keys on grab-broken-eventVolker Rümelin
There is no way to grab the Ctrl-Alt-Del key combination on Windows. This key combination will leave all three keys in a stuck condition. This patch uses the grab-broken-event to release the keys. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-3-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/gtk: fix handling of AltGr key on WindowsVolker Rümelin
Wire up the keyboard hooking code on Windows to fix the AltGr key and improve keyboard grabbing. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-2-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-19ui/win32-kbd-hook: handle AltGr in a hook procedureVolker Rümelin
Import win32 keyboard hooking code from project spice-gtk. This patch removes the extra left control key up/down input events inserted by Windows for the right alt key up/down input events with international keyboard layouts. Additionally there's some code to grab the keyboard. The next patches will use this code. Only Windows needs this. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200516072014.7766-1-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-18Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-05-18' into ↵Peter Maydell
staging nbd patches for 2020-05-20 - fix stranded fd in 'qemu-nbd -c /dev/nbd0' - add 'qemu-img map --start-offset --max-length' options # gpg: Signature made Mon 18 May 2020 17:29:56 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2020-05-18: iotests: Enhance 223 to cover qemu-img map improvements qemu-img: Add --start-offset and --max-length to map qemu-img: refactor dump_map_entry JSON format output qemu-img: validate image length in img_map qemu_img: add cvtnum_full to print error reports qemu-nbd: Close inherited stderr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-28 13:21:14 +0000