aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-01console: don't set PixelFormat alpha fields for 32bppGerd Hoffmann
Currently it is inconstent, PixelFormat->amask is left unset whereas abits and amax and ashift are filled. As an alpha channel doesn't make sense for the vga framebuffer leave all alpha fields clear. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: make qemu_alloc_display staticGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01pixman: add pixman image to DisplaySurfaceGerd Hoffmann
Surfaces are now allocated using pixman. DisplaySurface gets new struct fields with pixman image and data. DisplayChangeListeners can easily start using pixman now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01pixman: helper functionsGerd Hoffmann
Add some helper functions which will be put into use by following patches. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01pixman: windup in configure & makefilesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01pixman: add submoduleGerd Hoffmann
Add pixman submodule as fallback for old distros. Picking version 0.18.4. This is shipped by rhel6 and also the minimum version needed by spice so this should serve well as baseline. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: remove DisplayAllocatorGerd Hoffmann
Causes [temporary] preformance regression with 24bpp vga modes @ sdl. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: remove dpy_gfx_fillGerd Hoffmann
Unused code. 'nuff said. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01vga: fix text mode updatingGerd Hoffmann
With both text (curses) and graphics (vnc/sdl/spice/...) display active vga text mode emulation fails to update both correctly. Depending on whenever vga_update_text() or vga_draw_text() happens to be called first only the text display or only the graphics display will see display resolution changes and full redraws. Fix it by calling both text/gfx resize functions in both code paths and keep track of full screen redraws needed in VGACommonState fields. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: init displaychangelisteners on registerGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: untangle gfx & txt updatesGerd Hoffmann
Stop abusing displaysurface fields for text mode displays. (bpp = 0, width = cols, height = lines). Add flags to displaystate indicating whenever text mode display (curses) or gfx mode displays (sdl, vnc, ...) are present. Add separate displaychangelistener callbacks for text / gfx mode resize & updates. This allows to enable gfx and txt diplays at the same time and also paves the way for more cleanups in the future. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: s/TextConsole/QemuConsole/Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: move set_mouse + cursor_define callbacksGerd Hoffmann
When adding DisplayChangeListeners the set_mouse and cursor_define callbacks have been left in DisplayState for some reason. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: add unregister_displaychangelistenerGerd Hoffmann
Also change the way the gui_timer is initialized: each time a displaychangelistener is registered or unregistered we'll check whether we need a timer (due to dpy_refresh callback being present) and if so setup a timer, otherwise zap it. This way the gui timer works correctly with displaychangelisteners coming and going. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01console: QLIST-ify display change listeners.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-31target-mips: don't flush extra TLB on permissions upgradeAurelien Jarno
If the guest uses a TLBWI instruction for upgrading permissions, we don't need to flush the extra TLBs. This improve boot time performance by about 10%. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix TLBR wrt SEGMaskAurelien Jarno
Like r4k_map_address(), r4k_helper_tlbp() should use SEGMask to mask the address. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use deposit instead of hardcoded versionAurelien Jarno
Use the deposit op instead of and hardcoded bit field insertion. It allows the host to emit the corresponding instruction if available. At the same time remove the (lsb > msb) test. The MIPS64R2 instruction set manual says "Because of the instruction format, lsb can never be greater than msb, so there is no UNPREDICATABLE case for this instruction." (Bug reported as LP:1071149.) Cc: Никита Канунников <n.kanunnikov@sbtcom.ru> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize ddiv/ddivu/div/divu with movcondAurelien Jarno
The result of a division by 0, or a division of INT_MIN by -1 in the signed case, is unpredictable. Just replace 0 by 1 in that case so that it doesn't trigger a floating point exception on the host. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement movn/movz using movcondAurelien Jarno
Avoid the branches in movn/movz implementation and replace them with movcond. Also update a wrong command. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: don't use local temps for store conditionalAurelien Jarno
Store conditional operations only need local temps in user mode. Fix the code to use temp local only in user mode, this spares two memory stores in system mode. At the same time remove a wrong a wrong copied & pasted comment, store operations don't have a register destination. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement unaligned loads using TCGAurelien Jarno
Load/store from helpers should be avoided as they are quite inefficient. Rewrite unaligned loads instructions using TCG and aligned loads. The number of actual loads operations to implement an unaligned load instruction is reduced from up to 8 to 1. Note: As we can't rely on shift by 32 or 64 undefined behaviour, the code loads already shift by one constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: simplify load/store microMIPS helpersAurelien Jarno
load/store microMIPS helpers are reinventing the wheel. Call do_lw, do_ll, do_sw and do_sl instead of using a macro calling the cpu_* load/store functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize load operationsAurelien Jarno
Only allocate t1 when needed. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup load/store operationsAurelien Jarno
Load/store operations use macros for historical reasons. Now that there is no point in keeping them, replace them by direct calls to qemu_ld/st. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: restore CPU state after an FPU exceptionAurelien Jarno
Rework *raise_exception*() functions so that they can be called from other helpers, passing the return address as an argument. Use do_raise_exception() function in update_fcr31() to correctly restore the CPU state after an FPU exception. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use softfloat constants when possibleAurelien Jarno
softfloat already has a few constants defined, use them instead of redefining them in target-mips. Rename FLOAT_SNAN32 and FLOAT_SNAN64 to FP_TO_INT32_OVERFLOW and FP_TO_INT64_OVERFLOW as even if they have the same value, they are technically different (and defined differently in the MIPS ISA). Remove the unused constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup float to int conversion helpersAurelien Jarno
Instead of accessing the flags from the floating point control register after updating it, read the softfloat flags. This is just code cleanup and should not change the behaviour. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix FPU exceptionsAurelien Jarno
For each FPU instruction that can trigger an FPU exception, to call call update_fcr31() after. Remove the manual NaN assignment in case of float to float operation, as softfloat is already taking care of that. However for float to int operation, the value has to be changed to the MIPS one. In the cvtpw_ps case, the two registers have to be handled separately to guarantee a correct final value in both registers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: keep softfloat exception set to 0 between instructionsAurelien Jarno
Instead of clearing the softfloat exception flags before each floating point instruction, reset them to 0 in update_fcr31() when an exception is detected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use the softfloat floatXX_muladd functionsAurelien Jarno
Use the new softfloat floatXX_muladd() functions to implement the madd, msub, nmadd and nmsub instructions. At the same time replace the name of the helpers by the name of the instruction, as the only reason for the previous names was to keep the macros simple. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31softfloat: implement fused multiply-add NaN propagation for MIPSAurelien Jarno
Add a pickNaNMulAdd function for MIPS, implementing NaN propagation rules for MIPS fused multiply-add instructions. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: do not save CPU state when using retranslationAurelien Jarno
When the CPU state after a possible retranslation is going to be handled through code retranslation, we don't need to save the CPU state before. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: correctly restore btarget upon exceptionAurelien Jarno
When the CPU state is restored through retranslation after an exception, btarget should also be restored. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31tcg: don't remove op if output needs to be synced to memoryAurelien Jarno
Commit 9c43b68de628a1e2cba556adfb71c17028eb802e do not correctly check for dead outputs when they need to be synced to memory in case of half-dead operations. Fix that by applying the same pattern than for the default case. Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-alpha: Use TCG_CALL_NO_WGRichard Henderson
Mark helper functions that raise exceptions, but otherwise do not change TCG register state, with TCG_CALL_NO_WG. Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-10-31chardev: Use timer instead of bottom-half to postpone open eventJan Kiszka
As the block layer may decide to flush bottom-halfs while the machine is still initializing (e.g. to read geometry data from the disk), our postponed open event may be processed before the last frontend registered with a muxed chardev. Until the semantics of BHs have been clarified, use an expired timer to achieve the same effect (suggested by Paolo Bonzini). This requires to perform the alarm timer initialization earlier as otherwise timer subsystem can be used before being ready. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-10-31target-mips: remove #if defined(TARGET_MIPS64) in opcode enumsAurelien Jarno
All switch() decoding instruction have a default entry, so it is possible to have unused enum entries. Remove conditional definitions of MIPS64 opcode enums, as it only makes the code less readable. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Change TODO fileJia Liu
Change DSP r1 & DSP r2 into microMIPS DSP encodings in TODO file. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP testcasesJia Liu
Add MIPS ASE DSP testcases. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP processorsJia Liu
Add 74kf and mips64dspr2-generic-cpu model for test. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP accumulator instructionsJia Liu
Add MIPS ASE DSP Accumulator and DSPControl Access instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP compare-pick instructionsJia Liu
Add MIPS ASE DSP Compare-Pick instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP bit/manipulation instructionsJia Liu
Add MIPS ASE DSP Bit/Manipulation instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP multiply instructionsJia Liu
Add MIPS ASE DSP Multiply instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP GPR-based shift instructionsJia Liu
Add MIPS ASE DSP GPR-Based Shift instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP arithmetic instructionsJia Liu
Add MIPS ASE DSP Arithmetic instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP load instructionsJia Liu
Add MIPS ASE DSP Load instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP branch instructionsJia Liu
Add MIPS ASE DSP Branch instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31Use correct acc value to index cpu_HI/cpu_LO rather than using a fix numberJia Liu
Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 11:11:45 +0000