aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-09x86: acpi: let the firmware handle pending "CPU remove" events in SMMIgor Mammedov
if firmware and QEMU negotiated CPU hotunplug support, generate _EJ0 method so that it will mark CPU for removal by firmware and pass control to it by triggering SMI. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09tests/acpi: allow expected files changeIgor Mammedov
Change that will be introduced by following patch: @@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001) CINS, 1, CRMV, 1, CEJ0, 1, + CEJF, 1, Offset (0x05), CCMD, 8 } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplugIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09acpi: cpuhp: introduce 'firmware performs eject' status/control bitsIgor Mammedov
Adds bit #4 to status/control field of CPU hotplug MMIO interface. New bit will be used OSPM to mark CPUs as pending for removal by firmware, when it calls _EJ0 method on CPU device node. Later on, when firmware sees this bit set, it will perform CPU eject which will clear bit #4 as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201207140739.3829993-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09hw/i386/pc: add max combined fw size as machine configuration optionErich-McMillan
At Hewlett Packard Inc. we have a need for increased fw size to enable testing of our custom fw. Rebase v6 patch to d73c46e4 Signed-off-by: Erich McMillan <erich.mcmillan@hp.com> Message-Id: <20201208155338.14-1-erich.mcmillan@hp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09block/export: avoid g_return_val_if() input validationStefan Hajnoczi
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-5-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-input: avoid g_return_val_if() input validationStefan Hajnoczi
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-4-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-gpu: avoid g_return_val_if() input validationStefan Hajnoczi
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-3-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09contrib/vhost-user-blk: avoid g_return_val_if() input validationStefan Hajnoczi
Do not validate input with g_return_val_if(). This API is intended for checking programming errors and is compiled out with -DG_DISABLE_CHECKS. Use an explicit if statement for input validation so it cannot accidentally be compiled out. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201118091644.199527-2-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09.gitlab-ci: add build-libvhost-userMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09libvhost-user: add a simple link test without glibMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-8-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: make it a meson subprojectMarc-André Lureau
By making libvhost-user a subproject, check it builds standalone (without the global QEMU cflags etc). Note that the library still relies on QEMU include/qemu/atomic.h and linux_headers/. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: drop qemu/osdep.h dependencyMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-5-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: remove qemu/compiler.h usageMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20201125100640.366523-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: replace qemu/memfd.h usageMarc-André Lureau
Undo the damage from commit 5f9ff1eff3 ("libvhost-user: Support tracking inflight I/O in shared memory") which introduced glib dependency through osdep.h inclusion. libvhost-user.c tries to stay free from glib usage. Use glibc memfd_create directly when available (assumed so when MFD_ALLOW_SEALING is defined). A following commit will make the project standalone and check for memfd API at configure time, instead of a panic at runtime. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201125100640.366523-3-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08libvhost-user: replace qemu/bswap.h with glibc endian.hMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201125100640.366523-2-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08hw: add compat machines for 6.0Cornelia Huck
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20201109173928.1001764-1-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove primary_dev memberJuan Quintela
Only three uses remained, and we can remove them on that case. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-28-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify failover_unplug_primaryJuan Quintela
We can calculate device just once. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-27-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Caller of this two functions already have primary_devJuan Quintela
Pass it as an argument. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-26-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: We don't need to cache primary_device_id anymoreJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-25-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: split failover_find_primary_device_id()Juan Quintela
So we can calculate the device id when we need it. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-24-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: remove failover_find_primary_device() error parameterJuan Quintela
It can never give one error. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-23-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: make sure that id always existJuan Quintela
We check that it exist at device creation time, so we don't have to check anywhere else. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-22-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify qdev_device_add()Juan Quintela
We don't need to walk the opts by hand. qmp_opt_get() already does that. And then we can remove the functions that did that walk. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-21-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify qdev_device_add() failover caseJuan Quintela
Just put allthe logic inside the same if. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-20-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Rename to failover_find_primary_device()Juan Quintela
This commit: * Rename them to failover_find_primary_devices() so - it starts with failover_ - it don't connect anything, just find the primary device * Create documentation for the function Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-19-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: virtio_net_connect_failover_devices() does nothingJuan Quintela
It just calls virtio_net_find_primary(), so just update the callers. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-18-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Rename function to hide_device()Juan Quintela
You should not use pasive. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-17-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: should_be_hidden() should take a boolJuan Quintela
We didn't use at all the -1 value, and we don't really care. It was only used for the cases when this is not the device that we are searching for. And in that case we should not hide the device. Once there, simplify virtio-Snet_primary_should_be_hidden. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-16-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: simplify virtio_net_find_primary()Juan Quintela
a - is_my_primary() never sets one error b - If we return 1, primary_device_id is always set Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-15-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove memory leakJuan Quintela
Two things, at this point: * n->primary_device_id has to be set, otherwise virtio_net_find_primary don't work. So we have a leak here. * it has to be exactly the same that prim_dev->id because what qdev_find_recursive() does is just compare this two values. So remove the unneeded assignment and leaky bits. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-14-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove primary_device_dictJuan Quintela
It was only used once. And we have there opts->id, so no need for it. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-13-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: remove standby_id variableJuan Quintela
We can calculate it, and we only use it once anyways. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-12-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove primary_device_optsJuan Quintela
It was really only used once, in failover_add_primary(). Just search for it on global opts when it is needed. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-11-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: g_strcmp0() knows how to handle NULLJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-10-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Rename bool to failover_primary_hiddenJuan Quintela
You should not use passive naming variables. And once there, be able to search for them. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-9-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: qdev_device_add() returns err or dev setJuan Quintela
Never both. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-8-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove external partially_hotplugged propertyJuan Quintela
It was only set "once", and with the wrong value. As far as I can see, libvirt still don't use it. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-7-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Remove unused parameterJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-6-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: primary bus is only used once, and where it is setJuan Quintela
Just remove the struct member. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-5-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: Use always atomics for primary_should_be_hiddenJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-4-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08failover: fix indentantionJuan Quintela
Once there, remove not needed cast. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20201118083748.1328-3-quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08unit-test: Add the binary file and clear diff.hYubo Miao
Add the binary file DSDT.pxb and clear bios-tables-test-allowed-diff.h Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-10-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08unit-test: Add testcase for pxbYubo Miao
Add testcase for pxb to make sure the ACPI table is correct for guest. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-9-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08unit-test: The files changed.Yubo Miao
The unit-test is seperated into three patches: 1. The files changed and list in bios-tables-test-allowed-diff.h 2. The unit-test 3. The binary file and clear bios-tables-test-allowed-diff.h The ASL diff would also be listed. Sice there are 1000+lines diff, some changes would be omitted. * Original Table Header: * Signature "DSDT" - * Length 0x000014BB (5307) + * Length 0x00001E7A (7802) * Revision 0x02 - * Checksum 0xD1 + * Checksum 0x57 * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) + Device (PC80) + { + Name (_HID, "PNP0A08" /* PCI Express Bus */) // _HID: Hardware ID + Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID + Name (_ADR, Zero) // _ADR: Address + Name (_CCA, One) // _CCA: Cache Coherency Attribute + Name (_SEG, Zero) // _SEG: PCI Segment + Name (_BBN, 0x80) // _BBN: BIOS Bus Number + Name (_UID, 0x80) // _UID: Unique ID + Name (_STR, Unicode ("pxb Device")) // _STR: Description String + Name (_PRT, Package (0x80) // _PRT: PCI Routing Table + { + Package (0x04) + { + 0xFFFF, + Zero, + GSI0, + Zero + }, + Packages are omitted. + Package (0x04) + { + 0x001FFFFF, + 0x03, + GSI2, + Zero + } + }) + Device (GSI0) + { + Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */) // _HID: Hardware ID + Name (_UID, Zero) // _UID: Unique ID + Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings + { + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, ) + { + 0x00000023, + } + }) + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, ) + { + 0x00000023, + } + }) + Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings + { + } + } GSI1,2,3 are omitted. + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x0080, // Range Minimum + 0x0080, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + Name (SUPP, Zero) + Name (CTRL, Zero) + Method (_OSC, 4, NotSerialized) // _OSC: Operating System Capabilities + { + CreateDWordField (Arg3, Zero, CDW1) + If ((Arg0 == ToUUID ("33db4d5b-1ff7-401c-9657-7441c03dd766") /* PCI Host Bridge Device */)) + { + CreateDWordField (Arg3, 0x04, CDW2) + CreateDWordField (Arg3, 0x08, CDW3) + SUPP = CDW2 /* \_SB_.PC80._OSC.CDW2 */ + CTRL = CDW3 /* \_SB_.PC80._OSC.CDW3 */ + CTRL &= 0x1F + If ((Arg1 != One)) + { + CDW1 |= 0x08 + } + + If ((CDW3 != CTRL)) + { + CDW1 |= 0x10 + } + + CDW3 = CTRL /* \_SB_.PC80.CTRL */ + Return (Arg3) + } + Else + { + CDW1 |= 0x04 + Return (Arg3) + } + } DSM is are omitted Device (PCI0) { Name (_HID, "PNP0A08" /* PCI Express Bus */) // _HID: Hardware ID WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum - 0x00FF, // Range Maximum + 0x007F, // Range Maximum 0x0000, // Translation Offset - 0x0100, // Length + 0x0080, // Length Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-8-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi: Align the size to 128kYubo Miao
If table size is changed between virt_acpi_build and virt_acpi_build_update, the table size would not be updated to UEFI, therefore, just align the size to 128kb, which is enough and same with x86. It would warn if 64k is not enough and the align size should be updated. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-7-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi/gpex: Build tables for pxbYubo Miao
The resources of pxbs are obtained by crs_build and the resources used by pxbs would be moved from the resources defined for host-bridge. The resources for pxb are composed of following two parts: 1. The bar space of the pci-bridge/pcie-root-port behined it 2. The config space of devices behind it. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-6-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi: Extract crs build form acpi_build.cYubo Miao
Extract crs build form acpi_build.c, the function could also be used to build the crs for pxbs for arm. The resources are composed by two parts: 1. The bar space of pci-bridge/pcie-root-ports 2. The resources needed by devices behind PXBs. The base and limit of memory/io are obtained from the config via two APIs: pci_bridge_get_base and pci_bridge_get_limit Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08hw/arm/virt: Write extra pci roots into fw_cfgJiahui Cen
Add bus property to virt machine for primary PCI root bus and use it to add extra pci roots behind it. Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Message-Id: <20201119014841.7298-4-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-02 21:32:41 +0000