Age | Commit message (Collapse) | Author |
|
With sparc64 we need not distinguish between registers that
can hold 32-bit values and those that can hold 64-bit values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Emphasize that we only support full 64-bit code generation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since 9b9c37c36439, we have only supported sparc64 cpus.
Debian and Gentoo now only support 64-bit sparc64 userland,
so it is time to drop the 32-bit sparc64 userland: sparc32plus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This might allow the compiler to check values.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f9da172e486c1f57f8542c7c3cb0223cffa89b1f.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <ab891af01894bc01df0df78247da00fef4f59242.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The NVRAM_SIZE constant was defined but not used. Rename it to
MACIO_NVRAM_SIZE to match the device model and use it where appropriate.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <5b53c70438dfb46837af8a094e753706b06c4ec6.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The PROM_FILENAME and KERNEL_* defines are used by mac_oldworld and
mac_newworld but they don't have to be identical so these could be
moved to the individual boards.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <5fa693334adf166d23931c81d81ada4e3441ed7d.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b133a84dfd38366eea2bb11b7ca433758efacc10.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Move the parts specific to and only used by macio out from the shared
mac.h into macio.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <ac570ce9dcbae169310503689053807b8b4b86bc.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Move the parts specific to and only used by mac99 out from the shared
mac.h into mac_newworld.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f3c6862de5b51ef49ae0714cf7ee21828d0502cf.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
By storing the device pointers in a variable with the right type the
number of QOM casts can be reduced which also makes the code more
readable.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <f701e5ae03c806969561a7fd7523ef407db6dc89.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Map regions in ascending order and reorganise code a bit to avoid some
casts and move Uninorth parts together.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <a6263b23757dd4a1e1b17a9aa9fb87115f3a1e71.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Several variables are set in if-else branches where the else branch
can be removed by setting a default value at the variable declaration
which leads to simlpler code that is easier to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <8dac3515b29976a61dacda07752175d7531dca3c.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The tbfreq variable is only set once in an if-else which can be done
at the variable declaration saving some lines of code and making it
simpler.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <15668da8eb8bad4561428a5f25b02f91e16d9c1b.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Drop some more local variables additionally to commit b8df32555ce5 to
match clean ups done to mac_newwold in previous patch.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1b9a448431d9b1198432151af0511316cfc20d21.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Values not used frequently enough may not worth putting in a local
variable, especially with names almost as long as the original value
because that does not improve readability, to the contrary it makes it
harder to see what value is used. Drop a few such variables. This is
the same clean up that was done for mac_oldworld in commit b8df32555ce5.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <a3ee09dea27af9685fd2ccd2f7ab40a813d6812f.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The nvme-io_uring driver expects a character special file such as
/dev/ng0n1. Follow the convention of having a "filename" option when a
regular file is expected, and a "path" option otherwise.
This makes io_uring the only libblkio-based driver with a "filename"
option, as it accepts a regular file (even though it can also take a
block special file).
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-id: 20221028233854.839933-1-afaria@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Some libblkio drivers may be able to work with regular files (e.g.,
io_uring) or otherwise resizable devices. Conservatively set
BlockDriver::has_variable_length to true to ensure bdrv_nb_sectors()
always gives up-to-date results.
Also implement BlockDriver::bdrv_co_truncate for the case where no
preallocation is needed and the device already has a size compatible
with what was requested.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-id: 20221029122031.975273-1-afaria@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
libblkio 1.1.0 [1] introduces a virtio-blk-vfio-pci driver, which
accesses a virtio-blk PCI device using VFIO. Add a corresponding
BlockDriver.
[1] https://gitlab.com/libblkio/libblkio/-/tree/v1.1.0
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-id: 20221028131635.710267-1-afaria@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit 8801ccd0500437 introduced a compilation failure with clang
version 10.0.0-4ubuntu1:
../../net/vhost-vdpa.c:654:16: error: variable 'vdpa_device_fd' is
used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:662:33: note: uninitialized use occurs here
r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
^~~~~~~~~~~~~~
../../net/vhost-vdpa.c:654:12: note: remove the 'if' if its condition
is always true
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:629:23: note: initialize the variable
'vdpa_device_fd' to silence this warning
int vdpa_device_fd;
^
= 0
1 error generated.
It's a false positive -- the compiler doesn't manage to figure out
that the error checks further up mean that there's no code path where
vdpa_device_fd isn't initialized. Put another way, the problem is
that we check "if (opts->has_vhostfd)" when in fact that condition
must always be true. A cleverer static analyser would probably warn
that we were checking an always-true condition.
Fix the compilation failure by removing the unnecessary if().
Fixes: 8801ccd0500437 ("vhost-vdpa: allow passing opened vhostfd to vhost-vdpa")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221031132901.1277150-1-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Patches for Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEESSNv6nXJXWmOwreK4Iwh1Wd0UK0FAmNfkC0ACgkQ4Iwh1Wd0
# UK2tEw//QQapqOnJQmjiGVWJ3xUEVoDUmZbhXlPaLKOzSkAnrnIdIO2p4jsXrITi
# LfL8PF7wCg1+oldPsKmhh+ZD6XiUyNBpTt61atXRJS/TybKAGjI33XC+/Hliwity
# 4A0+WxJ960ExLwZzaE/ANTYM86Jo5SqhzACosGh8txRbL1rkmqlrCU1DwnhU6vq1
# 5ph1HFgpqkii43Eiq+v1nmkbh5MWVuMap6MOoQzgwVTkaUU0cTmR8/KqhSHrIryj
# xFPH2wY8pA3vFgMv5OSOjq5Lg197kiWUyhJa6eBBsi4MKnQgRzAxE6yHhpyYZ5EA
# dMW9iLhPVFRDAoQOiSRLj/NA1nl2gwDdjs5WhKqF6AtxMck5IDqltLKFvLlXIxiK
# BYi3ghVeA5LUarcxuAOHse8rCXxBaIJI3aSolO5fDe0mcpNIb7CgCleBKlnBWEsP
# GtRhr1AkoKHcetO5iEfg1QG71/XWdWWy3hfW39GJeBl9C7/AxzoLC7yStI7Iv3b4
# tv/Tylt+Js1KadA9z/tof4wm4NkGf2Q9aFoSbm4pSZH+7b4ZI5LVLlDKYCnjT37v
# LekyJgkU3wRjKdLkM1n6qhsa5Ey2D7STw9ANWQwqOImoj5Dkix2FIqfaydctgrxq
# zmdQpJhOzIO8b9vVSRLn2xYtae5LNlxiAx85r5l11jwfqDOWTts=
# =ZJqu
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 05:06:53 EDT
# gpg: using RSA key 49236FEA75C95D698EC2B78AE08C21D5677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>" [unknown]
# gpg: aka "Stefan Weil (Universitätsbibliothek Mannheim) <stefan.weil@uni-mannheim.de>" [unknown]
# gpg: aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>" [unknown]
# gpg: aka "Stefan Weil <stefan.weil@weilnetz.de>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2 B78A E08C 21D5 6774 50AD
* tag 'pull-qemu-20221031' of https://gitlab.com/stweil/qemu:
block/nfs: Fix 32-bit Windows build
scripts/nsis.py: Automatically package required DLLs of QEMU executables
scripts/nsis.py: Fix destination directory name when invoked on Windows
scripts/nsis.py: Drop the unnecessary path separator
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
MIPS patches queue
- Convert nanoMIPS disassembler from C++ to C (Milica Lazarevic)
- Consolidate VT82xx/PIIX south bridges (Bernhard Beschow)
- Remove unused MAX_IDE_BUS definition (Zoltan Balaton)
- Fix branch displacement for BEQZC/BNEZC (David Daney)
- Don't set link_up for Boston's xilinx-pcie (Jiaxun Yang)
- Use bootloader API to set BAR registers in Malta (Jiaxun Yang)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmNfpO8ACgkQ4+MsLN6t
# wN76og/+LMuTYYRkhETZyw3v5sTAexU0kmXyf/xMZ8PLi37Al2ia3qxo70qTh34m
# P2bbpCC46xzLCVY4s/84pb1lgpANNJNMIHwUni9HL4cTPPR7muKqpUOTEVh6Ghcq
# Zb2+e7yTKpIgvwDcIQEzU74gDyCcJoAo4LcLRVtuXer6olQsYsmlUqr3gg+Oy5kI
# zuJxOxZRoAP4H/ausGPg8oves28S3fVsw9J1x5p7vlzGt1Kx/i1XilSuGXI3H/79
# 0tgofUYkyFQRjxPLlE9OeYVwAo8gLFWwnkw/AOjHSOgGUsj/7yJXORm0ng/vQOqS
# j5036BHxmhYyEVL8aJAc7fvb4/m6walsXJItThqJ/JXphdAXi17fCCn0Wf9jqGrr
# io4Gm5qZI1bO/1orTaQywZTCjSi3pcuM0NxLZ/Qf7CVoXvNcddpDrSlyD3ILz9cq
# XqyaKQJ3kLvWTpJ6kZknl3s4kGnnMZw+2lZlusrSjrI4QnXmgoGLiSTRPxny1qQ0
# NaqAnys0Skn0fJ002na3lJgo4mzxzN+zEzMHsbB+RZv9JB2lIwQBm+zXDFHhb9Zv
# H0UFowi5lhJUjIZ5+bl4wtT2XoM4HM1YxU66a0t4SktMnKvBPCVBLUSj74Qdl1K8
# 7e2SvWB2ovNgscwek/srk1TT+yf7a6CmAraATSm0Fm/kxT5xa/Y=
# =EqI/
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 31 Oct 2022 06:35:27 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20221030' of https://github.com/philmd/qemu: (55 commits)
hw/mips/malta: Use bootloader helper to set BAR registers
hw/mips: Use bl_gen_kernel_jump to generate bootloaders
hw/mips/bootloader: Allow bl_gen_jump_kernel to optionally set register
hw/mips/boston: Don't set link_up for xilinx-pcie
hw/isa/piix4: Move pci_ide_create_devs() call to board code
hw/isa/piix4: Add missing initialization
hw/isa/Kconfig: Fix dependencies of piix4 southbridge
hw/mips/malta: Reuse dev variable
hw/isa/piix3: Remove unused include
hw/ide/piix: Introduce TYPE_ macros for PIIX IDE controllers
hw/isa/piix4: Rename wrongly named method
hw/isa/piix3: Prefer pci_address_space() over get_system_memory()
hw/isa/piix3: Modernize reset handling
hw/isa/piix3: Add size constraints to rcr_ops
hw/isa/piix3: Remove extra ';' outside of functions
hw/i386/pc: Create DMA controllers in south bridges
disas/mips: Fix branch displacement for BEQZC and BNEZC
disas/nanomips: Rename nanomips.cpp to nanomips.c
disas/nanomips: Remove argument passing by ref
disas/nanomips: Replace Cpp enums for C enums
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Translate embedded assembly into IO writes which is more
readable.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210127065424.114125-4-jiaxun.yang@flygoat.com>
[PMD: Explode addresses/values to ease review/maintainance]
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026191821.28167-4-philmd@linaro.org>
|
|
Replace embedded binary with generated code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210127065424.114125-3-jiaxun.yang@flygoat.com>
[PMD: Pass semihosting_get_argc() to bl_gen_jump_kernel()]
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026191821.28167-3-philmd@linaro.org>
|
|
When one of the $sp/$a[0..3] register is already set, we might
want bl_gen_jump_kernel() to NOT set it again. Pass a boolean
argument for each register, to allow to optionally set them.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026191821.28167-2-philmd@linaro.org>
|
|
PCIe port 0 and 1 had link_up set as false previously,
that makes those two ports effectively useless. It can
be annoying for users to find that the device they plug
on those buses won't work at all.
As link_up is true by default, just don't set it again in
boston platform code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20221024143540.97545-1-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
For the VIA south bridges there was a comment to have the call in board code.
Move it there for PIIX4 as well for consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-29-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
PIIX3 clears its reset control register, so do the same in PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221022150508.26830-28-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221022150508.26830-27-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
While at it, move the assignments closer to where they are used.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221022150508.26830-26-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Ammends commit 988fb613215993dd0ce642b89ca8182c479d39dd.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221022150508.26830-19-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221022150508.26830-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
This method post-loads the southbridge, not the IDE device.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
get_system_memory() accesses global state while pci_address_space() uses
whatever has been passed to the device instance, so avoid the global.
Moreover, PIIX4 uses pci_address_space() here as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Rather than registering the reset handler via a function which
appends the handler to a global list, prefer to implement it as
a virtual method - PIIX4 does the same already.
Note that this means that piix3_reset can now also be called writing to
the relevant configuration space register on a PCI bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
According to the PIIX3 datasheet, the reset control register is one byte in size.
Moreover, PIIX4 has it, so add it to PIIX3 as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Fixes the "extra-semi" clang-tidy check.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Just like in the real hardware (and in PIIX4), create the DMA
controllers in the south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221022150508.26830-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
disas/mips.c got added in commit 6643d27ea0 ("MIPS disas support")
apparently based on binutils tag 'gdb_6_1-branchpoint' [1].
Back then, MIPSr6 was not supported (added in binutils commit
7361da2c952 during 2014 [2]).
Binutils codebase diverged so much over the last 18 years, it is
not possible to simply cherry-pick their changes, so fix it BEQZC /
BNEZC 21-bit signed branch displacement locally.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=opcodes/mips-dis.c;hb=refs/tags/gdb_6_1-branchpoint
[2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=7361da2c952
Fixes: 31837be3ee ("target-mips: add compact and CP1 branches")
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
[PMD: Added commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221014112322.61119-1-philmd@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Now that everything has been converted to C code the nanomips.cpp file
has been renamed. Therefore, meson.build file is also changed.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-25-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Replaced argument passing by reference with passing by address.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-24-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Change enums to typedef enums to keep naming clear.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-23-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Since there's no support for exception handling in C, the try-catch
blocks have been deleted, and throw clauses are replaced. When a runtime
error happens, we're printing out the error message. Disassembling of
the current instruction interrupts. This behavior is achieved by adding
sigsetjmp() to discard further disassembling after the error message
prints and by adding the siglongjmp() function to imitate throwing an
error. The goal was to maintain the same output as it was.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-22-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
This patch expands the Dis_info struct, which should hold the
necessary data for handling runtime errors. Fields fprintf_func and
stream are in charge of error printing. Field buf enables the use of
sigsetjmp() and siglongjmp() functions. Support for runtime error
handling will be added later.
We're filling Dis_info at the entrance of the nanoMIPS disassembler,
i.e. print_insn_nanomips. Next, we're adding that information as an
argument wherever we need to.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-21-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Disassemble function that calls the other variant of it is deleted.
Where it is called, now we're directly calling the other implementation.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-20-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
g_autofree attribute is added for every dynamically allocated string to
prevent memory leaking.
The implementation of the several functions that work with dynamically
allocated strings is slightly changed so we can add those attributes.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-19-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
CPR functions has been removed.
Before this patch, we'd been calling img_format twice, the first time
through the CPR function to get an appropriate string and the second
time to print that formatted string. There's no more need for that.
Therefore, calls to CPR are removed, and now we're directly printing
"CP" and integer value instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-18-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Both versions of IMMEDIATE functions have been removed.
Before this patch, we'd been calling img_format twice, the first time
through the IMMEDIATE to get an appropriate string and the second time
to print that string. There's no more need for that. Therefore, calls to
IMMEDIATE are removed, and now we're directly printing the integer
values instead.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-17-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The return type of typedef disassembly_function is changed to char *
instead of std::string. Therefore, for every particular
disassembly_function function signature is changed.
For example:
- static std::string ABS_D(uint64 instruction, img_address m_pc) {...}
is replaced with
- static char *ABS_D(uint64 instruction, img_address m_pc) {...}
Every helper function used to return std::string is changed to return
const char * or char *. Where the return value points to a static string
that the caller must not free, the return type is const char *. If a
function allocates memory and the caller is required to free it, the
return type is a char *. This applies to the following functions:
img_format, to_string, GPR, save_restore_list, FPR, etc.
Now that we replaced every std::string for const char * or char *, it is
possible to delete multiple versions of the img_format function. The
general version:
- static char *img_format(const char *format, ...) {...}
can handle all string formatting, so others have been deleted.
Where necessary, strings are dynamically allocated with g_strjoinv,
g_strdup, g_strdup_vprintf, and g_strdup_printf. Memory leaking will be
prevented later.
String concatenation in the save_restore_list() function is handled
using g_strjoinv() function instead of += operator.
The type of the "dis" parameter in the Disassemble function is changed
- from std::string &
- to char **
Without applying all of these changes, the nanomips disassembler may be
buildable but can't produce the appropriate output, so all of them are
made together.
Signed-off-by: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220912122635.74032-16-milica.lazarevic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|