aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-13linux-user/signal.c: Rename s390 target_ucontext fields to fix ia64Peter Maydell
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and 'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*, bringing them into line with the other targets and fixing a compile failure on ia64 hosts caused by this clash. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-13linux-user: make MIPS and ARM eabi use same argument reorderingRiku Voipio
MIPS uses similar calling convention than ARM eabi, where when using 64-bit values some registers are skipped. This patch makes MIPS and ARM eabi share the argument reordering code. This affects ftruncate64, creating insane sized fails (or just failing). Cc: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-13linux-user: correct syscall 123 on sh4Riku Voipio
As reported by Cédric VINCENT: The syscall #123 on SH4 should be "TARGET_NR_cacheflush" instead of "TARGET_NR_modify_ldt" [1]. The only consequence of this misnaming is that many "Unsupported syscall" warnings are issued when emulating JIT compilers. Reported-by: Cédric VINCENT <cedric.vincent@st.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: rlimit codes are not the sameWesley W. Terpstra
The codes for get/setrlimit differ between linux target platforms. This patch adds conversion. This is important else programs (rsyslog, python, ...) can go into a near infinite loop trying to close all the file descriptors from 0 to -1. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: rlimit incorrectly converts valuesWesley W. Terpstra
Byte swap was applied in the wrong order with testing for RLIM_INFINITY. On mips bigendian from an amd64 system this results in infinity being misinterpretted as 2^31-1. This is a serious bug because it causes setrlimit stack size to kill all child processes. This means (for example) that 'make' can run no children. The mechanism of failure: 1. parent sets stack size rlimit to 'infinity' 2. qemu screws this value up 3. child process fetches stack size as a large (but non-infinite) value 4. qemu tries to allocate stack before execution 5. stack allocation fails (too big) and child process dies Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: null pointer deref should segfaultWesley W. Terpstra
Dereferencing a null pointer causes an exception 0xC (EXCP_AdEL) instead of EXCP_TLBL. This should also trigger a segfault. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: missing syscall returns wrong errnoWesley W. Terpstra
Return -TARGET_ENOSYS instead of -ENOSYS from linux-user/main.c * Caused strange 'Level 2 synchronization messages' instead of correctly reporting the syscall was missing. * Made glibc simply fail instead of using older syscalls Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
2011-07-12mips: sigaltstack argsWesley W. Terpstra
The syscall sigaltstack takes two parameters, not zero. This patch should have no impact as only values above 4 influence the runtime behaviour. Nevertheless, it is wrong. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user/syscall.c: Enforce pselect6 sigset size restrictionsPeter Maydell
Enforce the same restriction on the size of the sigset passed to pselect6 as the Linux kernel does. This is both correct and silences a gcc 4.6 warning about a write-only variable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Implement prlimit64 syscallPeter Maydell
Implement the prlimit64 syscall. Slightly modified to apply upstream -Riku Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for even more FB ioctlsCédric VINCENT
This patch was validated with programs from DirectFB-1.0 and WebKit/DirectFB. Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for more VT ioctlsCédric VINCENT
DirectFB-1.0 uses at least two of the four added ioctls, and the two others were added for completeness. This patch was validated with the program "vlock -all/-new". Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for KD...LED ioctlsCédric VINCENT
DirectFB-1.0 uses at least one of the four added ioctls, and the three others were added for completeness. This patch was validated with the program "setleds" and the following Makefile: SETLEDS_INIT = setleds -v -num -caps -scroll SETLEDS_TESTS = sh -c ' \ setleds -v +num +caps +scroll; \ setleds -v -num -caps -scroll; \ setleds -v +num -caps -scroll; \ setleds -v +num +caps -scroll; \ setleds -v +num +caps +scroll; \ setleds -v -num +caps +scroll; \ setleds -v -num -caps +scroll; \ setleds -v -num -caps -scroll' SETLEDS_HOST = setleds SETLEDS_QEMU = "SETLEDS_QEMU not set" .PHONY: setleds_tests setleds_tests: rm -f setleds.host setleds.target $(SETLEDS_INIT:setleds=$(SETLEDS_HOST)) $(SETLEDS_TESTS:setleds=$(SETLEDS_HOST)) >> setleds.host $(SETLEDS_INIT:setleds=$(SETLEDS_QEMU)) $(SETLEDS_TESTS:setleds=$(SETLEDS_QEMU)) >> setleds.target cmp setleds.host setleds.target Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11arm-semi: Provide access to CLI arguments passed through the "-append" optionCédric VINCENT
This patch basically adapts the new semi-hosting command-line support -- introduced by Wolfgang Schildbach in the commit 2e8785ac -- for use in system-mode. Note that the "arm_cmdline_len" and "host_cmdline_len" variables were renamed respectively "input_size" and "output_size" because: * in C, the term "length" is generally used to count the number of character in a string, not to count the number of bytes in a buffer (as it is the case here). * in QEMU, the term "host" is used to name variables that are in the host address space, not to name variables in the target address space (as it is the case here). * in the case of this system-call, the terms "input" and "output" fit the semantic of the official ARM semi-hosting specification quite well. I know renaming can be considered harmful but I do think in this case the semantic really matters to keep this code more understandable. Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Reviewed-by: Christophe Lyon <christophe.lyon@st.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Paul Brook <paul@codesourcery.com> Cc: Wolfgang Schildbach <wschi@dolby.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-04pxa2xx_lcd: add proper rotation supportVasily Khoruzhick
Until now, pxa2xx_lcd only supported 90deg rotation, but some machines (for example Zipit Z2) needs 270deg rotation. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-04arm: Add const attribute to some arm_boot_info pointersStefan Weil
Parameter 'info' is const, so add the missing attribute. v2: Add 'const' to the local variable info in do_cpu_reset() and to the boot_info field in CPUARMState (suggested by Peter Maydell). Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-02esp: correctly fill bus id with requested lunHervé Poussineau
This bug showed up after 1455084ea2c48abf23c4e4e15e378ee43457f381, and may be seen only on operating systems *not* using DMA to give commands to SCSI adapter. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-02TCG/PPC: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01fix cpu_cc_src and cpu_cc_src2 corruption in udivx and sdivxArtyom Tarasenko
udivx and sdvix don't modify condition flags, so they shall not overwrite cpu_cc_* Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01Merge branch 'ppc-next' of git://repo.or.cz/qemu/agrafBlue Swirl
* 'ppc-next' of git://repo.or.cz/qemu/agraf: PPC: move TLBs to their own arrays PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type PPC: E500: Use MAS registers instead of internal TLB representation PPC: Only set lower 32bits with mtmsr PPC: update openbios firmware PPC: mpc8544ds: Add hypervisor node PPC: calculate kernel,initrd,cmdline locations dynamically target-ppc: Handle memory-forced I/O controller access PPC: E500: Implement reboot controller
2011-07-01tcg-hppa: Support deposit opcode.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01hppa: Fix printf warnings in hppa-dis.c.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01TCG/HPPA: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01TCG/HPPA: use TCG_REG_CALL_STACK instead of TCG_REG_SPBlue Swirl
Use TCG_REG_CALL_STACK instead of TCG_REG_SP for consistency. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-30etraxfs-ser: Correct default value for RW_REC_CTRLEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-06-28user: Fix -d debug logging for usermode emulationEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-06-28cris: Handle opcode zeroEdgar E. Iglesias
It's a valid branch pc + 2. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-06-28tcg/ppc64: Remove tcg_out_addimalc
The only user (within tcg.c) was removed Signed-off-by: malc <av1474@comtv.ru>
2011-06-28tcg/ppc: Remove tcg_out_addimalc
The only user (within tcg.c) was removed Signed-off-by: malc <av1474@comtv.ru>
2011-06-27Merge remote-tracking branch 'kraxel/usb.17' into stagingAnthony Liguori
2011-06-27Merge remote-tracking branch 'amit/for-anthony' into stagingAnthony Liguori
2011-06-27Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
2011-06-27Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-06-27vnc: Fix compilation with --enable-vnc-pngStefan Weil
Commit f26e428da505709ec03b2ed2c9eb3db82b30bd7b fixed compilation with --enable-vnc-png, but broke it with --enable-vnc-png. The breakage is caused by pngconfig.h which checks whether setjmp.h was already included and fails because qemu-common.h includes setjmp.h. The check is disabled by defining PNG_SKIP_SETJMP_CHECK. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-27virtio-serial: Fix segfault on guest bootLuiz Capitulino
If I start qemu with: # qemu -hda disks/test.img -enable-kvm -m 1G -snapshot \ -device virtio-serial \ -chardev socket,host=localhost,port=1234,server,nowait,id=foo \ -device virtserialport,chardev=foo,name=org.qemu.guest_agent I get a segfault when booting a Fedora 14 guest. The backtrace says: Program terminated with signal 11, Segmentation fault. #0 0x0000000000420850 in handle_control_message (vser=0x3732bd0, buf=0x2c173e0, len=8) at /home/lcapitulino/src/qmp-unstable/hw/virtio-serial-bus.c:335 335 info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info); What's happening is VIRTIO_CONSOLE_DEVICE_READY is a message for the whole device, not for an individual port. So port is NULL. This bug was introduced by commit a15bb0d6a981de749452a5180fc8084d625671da. This commit fixes that by making the port returned by find_port_by_id() be used only by the VIRTIO_CONSOLE_PORT_READY and VIRTIO_CONSOLE_PORT_OPEN messages. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-06-26Fix MinGW compilation when --enable-vnc-jpeg is specifiedRoy Tam
Fix conflicting types for 'INT32' in basetsd.h and jmorecfg.h by including qemu-common.h first. Signed-off-by: Roy Tam <roytam@gmail.com> Acked-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG/Sparc64: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. On Sparc64, stack pointer is not aligned but there is a fixed bias of 2047, so don't try to enforce alignment. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG/x86: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG/x86: use TCG_REG_CALL_STACK instead of TCG_REG_ESPBlue Swirl
Except for specific cases where the use of %esp changes the encoding of the instruction, it's cleaner to use TCG_REG_CALL_STACK instead of TCG_REG_ESP. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG: remove broken stack allocation for call argumentsBlue Swirl
The code for stack allocation for call arguments is way too simplistic to actually work on targets with non-trivial stack allocation policies, e.g. ppc64. We've also already allocated TCG_STATIC_CALL_ARGS_SIZE worth of stack for calls which should be well more than any helper needs. Remove broken dynamic stack allocation code and replace it with an assert. Should dynamic stack allocation ever be needed again, target specific functions should be added. Thanks to Richard Henderson for the analysis. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG: fix negative frame offset calculationsBlue Swirl
size_t is unsigned, so the frame offset calculations can be incorrect for negative offsets. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Delegate setup of TCG temporaries to targetsBlue Swirl
Delegate TCG temp_buf setup to targets, so that they can use a stack frame later instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu-exec.c: avoid AREG0 useBlue Swirl
Make functions take a parameter for CPUState instead of relying on global env. Pass CPUState pointer to TCG prologue, which moves it to AREG0. Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue change. Revert the hacks to avoid AREG0 use on Sparc hosts. Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. Compile the file without HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Move cpu_has_work and cpu_pc_from_tb to cpu.hBlue Swirl
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is needed by later patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26exec.h: fix coding style and change cpu_has_work to return boolBlue Swirl
Before the next patch, fix coding style of the areas affected. Change the type of the return value from cpu_has_work() and qemu_cpu_has_work() to bool. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu-exec: unify do_interrupt callBlue Swirl
Now that all targets use common function signature for do_interrupt(), there is no need for the #ifdeffery anymore. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26m68k: use caller supplied CPUState for interrupt related stuffBlue Swirl
Pass CPUState to do_interrupt(). This is needed by later patches. It would be cleaner to move the function to helper.c, but there are a few dependencies between do_interrupt() and other functions. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26x86: use caller supplied CPUState for interrupt related stuffBlue Swirl
Several x86 specific functions are called from cpu-exec.c with the assumption that global env register is valid. This will be changed later, so make the functions use caller supplied CPUState parameter. It would be cleaner to move the functions to helper.c, but there are quite a lot of dependencies between do_interrupt() and other functions. Add helpers for svm_check_intercept() and cpu_cc_compute_all() instead of calling the helper (which uses global env, AREG0) directly. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 17:36:58 +0000