| Age | Commit message (Collapse) | Author |
|---|
|
clang 3.7.0 on x86_64 warns about the following:
disas/arm.c:1782:17: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
imm |= (-1 << 7);
~~ ^
Note that this patch preserves the tab indent in this source file
because the surrounding code still uses tabs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
clang 3.7.0 on x86_64 warns about the following:
hw/tpm/tpm_tis.c:1000:36: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
tis->loc[c].iface_id = TPM_TIS_IFACE_ID_SUPPORTED_FLAGS1_3;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/tpm/tpm_tis.c:144:10: note: expanded from macro 'TPM_TIS_IFACE_ID_SUPPORTED_FLAGS1_3'
(~0 << 4)/* all of it is don't care */)
~~ ^
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commits 6c6f312d and bd797fc1 added new tests (test-blockjob-txn
and test-timed-average, respectively), but did not mark them for
exclusion in .gitignore.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1447386423-13160-1-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Include new error handling scenarios for 2.5.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1447196417-26081-1-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
seccomp branch queue
# gpg: Signature made Mon 16 Nov 2015 08:50:28 GMT using RSA key ID 12F8BD2F
# gpg: Good signature from "Eduardo Otubo (Software Engineer @ ProfitBricks) <eduardo.otubo@profitbricks.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1C96 46B6 E1D1 C38A F2EC 3FDE FD0C FF5B 12F8 BD2F
* remotes/otubo/tags/pull-seccomp-20151116:
seccomp: loosen library version dependency
configure: arm/aarch64: allow enable-seccomp
seccomp: add cacheflush to whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
# gpg: Signature made Fri 13 Nov 2015 20:16:21 GMT using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
* remotes/jnsnow/tags/ide-pull-request:
qtest/ahci: use raw format when qemu-img is absent
libqos: add qemu-img presence check
qtest/ahci: always specify image format
ahci/qtest: don't use tcp sockets for migration tests
atapi: Prioritize unknown cmd error over BCL error
atapi: add byte_count_limit helper
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Drop the libseccomp required version back to 2.1.0, restoring the ability
to build w/ --enable-seccomp on Ubuntu 14.04.
Commit 4cc47f8b3cc4f32586ba2f7fce1dc267da774a69 tightened the dependency
on libseccomp from version 2.1.0 to 2.1.1. This broke building on Ubuntu
14.04, the current Ubuntu LTS release. The commit message didn't mention
any specific functional need for 2.1.1, just that it was the most recent
stable version at the time. I reviewed the changes between 2.1.0 and 2.1.1,
but it looks like that update just contained minor fixes and cleanups - no
obvious (to me) new interfaces or critical bug fixes.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
|
|
This is a revert of ae6e8ef11e6cb, but with a bit of refactoring,
and also specifically adding arm/aarch64, rather than all
architectures. Currently, libseccomp code appears to also support
mips, ppc, and s390. We could therefore allow qemu to enable
seccomp for those platforms as well, with additional configure
patches, given they're tested and proven to work.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
|
|
cacheflush is an arm-specific syscall that qemu built for arm
uses. Add it to the whitelist, but only if we're linking with
a recent enough libseccomp.
Signed-off-by: Andrew Jones <drjones@redhat.com>
|
|
If we don't have the qemu-img tool, use the raw format
for tests and skip the high-sector LBA48 tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-4-git-send-email-jsnow@redhat.com
|
|
To allow tests to optionally exercise additional tests
that require the qemu-img tool that may not be present
in all builds.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-3-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-2-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447108074-20609-1-git-send-email-jsnow@redhat.com
|
|
If we don't know about the command at all, we need to prioritize
that failure above the zero byte-count-limit failure.
This fixes a failure in the sparc64 NetBSD 7.0 installer bootup.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1447095959-10046-3-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1447095959-10046-2-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
migration/next for 20151112
# gpg: Signature made Thu 12 Nov 2015 16:56:44 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151112:
migration_init: Fix lock initialisation/make it explicit
migrate-start-postcopy: Improve text
Postcopy: Fix TP!=HP zero case
Finish non-postcopiable iterative devices before package
migration: Make 32bit linux compile with RDMA
migration: print ram_addr_t as RAM_ADDR_FMT not %zx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Block layer patches (rebased Stefan's pull request)
# gpg: Signature made Thu 12 Nov 2015 15:34:16 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (43 commits)
block: Update copyright of the accounting code
scsi-disk: Account for failed operations
macio: Account for failed operations
ide: Account for failed and invalid operations
atapi: Account for failed and invalid operations
xen_disk: Account for failed and invalid operations
virtio-blk: Account for failed and invalid operations
nvme: Account for failed and invalid operations
iotests: Add test for the block device statistics
block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode
qemu-io: Account for failed, invalid and flush operations
block: New option to define the intervals for collecting I/O statistics
block: Add average I/O queue depth to BlockDeviceTimedStats
block: Compute minimum, maximum and average I/O latencies
block: Allow configuring whether to account failed and invalid ops
block: Add statistics for failed and invalid I/O operations
block: Add idle_time_ns to BlockDeviceStats
util: Infrastructure for computing recent averages
block: define 'clock_type' for the accounting code
ide: Account for write operations correctly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Peter reported a lock error on MacOS after my a82d593b
patch.
migrate_get_current does one-time initialisation of
a bunch of variables.
migrate_init does reinitialisation even on a 2nd
migrate after a cancel.
The problem here was that I'd initialised the mutex
in migrate_get_current, and the memset in migrate_init
corrupted it.
Remove the memset and replace it by explicit initialisation
of fields that need initialising; this also turns out to be simpler
than the old code that had to preserve some fields.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Improve the text in both the qapi-schema and hmp help to point out
you need to set the postcopy-ram capability prior to issuing
migrate-start-postcopy.
Also fix the text of the migrate_start_postcopy error that
deals with capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
I broke this when adding checks for clang++.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Where the target page size is different from the host page
we special case it, but I messed up on the zero case check.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Where we have iterable, but non-postcopiable devices (e.g. htab
or block migration), complete them before forming the 'package'
but with the CPUs stopped. This stops them filling up the package.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Rest of the file already use that trick. 64bit offsets make no sense in
32bit archs, but that is ram_addr_t for you.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Not all the wold is 64bits (yet).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
PC should be updated in the CPU state before calling check_breakpoints()
helper. Otherwise, the helper would not see the correct PC in the CPU
state if it is not at the start of a TB.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
virtio, vhost: fixes for 2.5
This fixes a performance regression with virtio 1,
and makes device stop/start more robust for vhost-user.
virtio devices on pcie bus now have pcie and pm
capability, as required by the PCI Express spec.
migration now works better with virtio 9p.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 12 Nov 2015 14:40:42 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-9p: add savem handlers
hw/virtio: Add PCIe capability to virtio devices
vhost: send SET_VRING_ENABLE at start/stop
vhost: rename RESET_DEVICE backto RESET_OWNER
vhost-user: modify SET_LOG_BASE to pass mmap size and offset
virtio-pci: unbreak queue_enable read
virtio-pci: introduce pio notification capability for modern device
virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible
KVM: add support for any length io eventfd
memory: don't try to adjust endianness for zero length eventfd
virtio-pci: fix 1.0 virtqueue migration
Conflicts:
include/hw/compat.h
[Fixed a trivial merge conflict in compat.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 80a2278e3ec2dafd5daab20a7cb2d6a9b83371e4.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 0ead7b0e59c22926e033ca12725e3a31985ec46b.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: ee6f4fde6a7c1071ca96d4ddd53e4934ff812fcd.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: bf4d6c9c563877e699b0bf42e7eaf8b096c4a35e.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 59dee4e2921b0c79d41c49b67dfb93d32db9f7f9.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: e0cbb96cb0e1f86c37c7ce332efdf02b57b9d365.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 4f623ce52c9d673d35a043fc2959526b41b685c6.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 678dc67da229759d404b44f7cc2bf5ed8bf8ad14.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 0fb8501bbf3666b3d5d3f67fa899729c88f21baf.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch switches to QEMU_CLOCK_VIRTUAL for the accounting code in
qtest mode, and makes the latency of the operation constant. This way we
can perform tests on the accounting code with reproducible results.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 35ed0501450fa572684e9b5e92c361ab6cce565b.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 78a7662a8636e55991737ece50003a2dc5a5f3e0.1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The BlockAcctStats structure contains a list of BlockAcctTimedStats.
Each one of these collects statistics about the minimum, maximum and
average latencies of all I/O operations in a certain interval of time.
This patch adds a new "stats-intervals" option that allows defining
these intervals.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 41cbcd334a61c6157f0f495cdfd21eff6c156f2a.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds two new fields to BlockDeviceTimedStats that track the
average number of pending read and write requests for a block device.
The values are calculated for the period of time defined for that
interval.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: fd31fef53e2714f2f30d59ed58ca2f67ec9ab926.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch keeps track of the minimum, maximum and average latencies
of I/O operations during a certain interval of time.
The values are exposed in the BlockDeviceTimedStats structure.
An option to define the intervals to collect these statistics will be
added in a separate patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: c7382dc89622c64f918d09f32815827772628f8e.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds two options, "stats-account-invalid" and
"stats-account-failed", that can be used to decide whether invalid and
failed I/O operations must be used when collecting statistics for
latency and last access time.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: ebc7e5966511a342cad428a392c5f5ad56b15213.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds the block_acct_failed() and block_acct_invalid()
functions to allow keeping track of failed and invalid I/O operations.
The number of failed and invalid operations is exposed in
BlockDeviceStats.
We don't keep track of the time spent on invalid operations because
they are cancelled immediately when they are started.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: a7256ccb883a86356b1c6c46b5a29ed5448546a5.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds the new field 'idle_time_ns' to the BlockDeviceStats
structure, indicating the time that has passed since the previous I/O
operation.
It also adds the block_acct_idle_time_ns() call, to ensure that all
references to the clock type used for accounting are in the same
place. This will later allow us to use a different clock for iotests.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 7d8cfcf931453e1a2443e6626e8c1edc347c7c8a.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This module computes the average of a set of values within a time
window, keeping also track of the minimum and maximum values.
In order to produce more accurate results it works internally by
creating two time windows of the same period, offsetted by half of
that period. Values are accounted on both windows and the data is
always returned from the oldest one.
[Add missing util/replay.o to test-timed-average dependencies to fix the
build.
--Stefan]
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 201b09c21bbc9c329779d2b2365ee2b9c80dceeb.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Its value is still QEMU_CLOCK_REALTIME, but having it in a variable will
allow us to change its value easily in the future when running in qtest
mode.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 547485eb841cf9e3b2770c96539ae9ae5996e214.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 2e71323c0875c2b66a8ae22229545e0c013af8d4.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently both BLKIF_OP_WRITE and BLKIF_OP_FLUSH_DISKCACHE are being
accounted as write operations.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7a2a14e3ac62027aa6267a6c02abc70717be9c0a.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The BlockJobTxn unit test verifies that both single jobs and pairs of
jobs behave as a transaction group. Either all jobs complete
successfully or the group is cancelled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
