aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-30COLO: Introduce state to record failover processzhanghailiang
When handling failover, COLO processes differently according to the different stage of failover process, here we introduce a global atomic variable to record the status of failover. We add four failover status to indicate the different stage of failover process. You should use the helpers to get and set the value. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Synchronize PVM's state to SVM periodicallyzhanghailiang
Do checkpoint periodically, the default interval is 200ms. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add checkpoint-delay parameter for migrate-set-parameterszhanghailiang
Add checkpoint-delay parameter for migrate-set-parameters, so that we can control the checkpoint frequency when COLO is in periodic mode. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Load VMState into QIOChannelBuffer before restore itzhanghailiang
We should not destroy the state of SVM (Secondary VM) until we receive the complete data of PVM's state, in case the primary fails in the process of sending the state, so we cache the VM's state in secondary side before load it into SVM. Besides, we should call qemu_system_reset() before load VM state, which can ensure the data is intact. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Send PVM state to secondary side when do checkpointzhanghailiang
VM checkpointing is to synchronize the state of PVM to SVM, just like migration does, we re-use save helpers to achieve migrating PVM's state to Secondary side. COLO need to cache the data of VM's state in the secondary side before synchronize it to SVM. COLO need the size of the data to determine how much data should be read in the secondary side. So here, we can get the size of the data by saving it into I/O channel before send it to the secondary side. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Add a new RunState RUN_STATE_COLOzhanghailiang
Guest will enter this state when paused to save/restore VM state under COLO checkpoint. Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Introduce checkpointing protocolzhanghailiang
We need communications protocol of user-defined to control the checkpointing process. The new checkpointing request is started by Primary VM, and the interactive process like below: Checkpoint synchronizing points: Primary Secondary initial work 'checkpoint-ready' <-------------------- @ 'checkpoint-request' @ --------------------> Suspend (Only in hybrid mode) 'checkpoint-reply' <-------------------- @ Suspend&Save state 'vmstate-send' @ --------------------> Send state Receive state 'vmstate-received' <-------------------- @ Release packets Load state 'vmstate-load' <-------------------- @ Resume Resume (Only in hybrid mode) Start Comparing (Only in hybrid mode) NOTE: 1) '@' who sends the message 2) Every sync-point is synchronized by two sides with only one handshake(single direction) for low-latency. If more strict synchronization is required, a opposite direction sync-point should be added. 3) Since sync-points are single direction, the remote side may go forward a lot when this side just receives the sync-point. 4) For now, we only support 'periodic' checkpoint, for which the Secondary VM is not running, later we will support 'hybrid' mode. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: Establish a new communicating path for COLOzhanghailiang
This new communication path will be used for returning messages from Secondary side to Primary side. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Switch to COLO process after finishing loadvmzhanghailiang
Switch from normal migration loadvm process into COLO checkpoint process if COLO mode is enabled. We add three new members to struct MigrationIncomingState, 'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO related thread for secondary VM, 'migration_incoming_co' records the original migration incoming coroutine. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Enter into COLO mode after migration if COLO is enabledzhanghailiang
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side enters this state after the first live migration successfully finished if COLO is enabled by command 'migrate_set_capability x-colo on'. We reuse migration thread, so the process of checkpointing will be handled in migration thread. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30COLO: migrate COLO related info to secondary nodezhanghailiang
We can determine whether or not VM in destination should go into COLO mode by referring to the info that was migrated. We skip this section if COLO is not enabled (i.e. migrate_set_capability colo off), so that, It doesn't break compatibility with migration no matter whether users configure the --enable-colo/disable-colo on the source/destination side or not; Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30migration: Introduce capability 'x-colo' to migrationzhanghailiang
We add helper function colo_supported() to indicate whether colo is supported or not, with which we use to control whether or not showing 'x-colo' string to users, they can use qmp command 'query-migrate-capabilities' or hmp command 'info migrate_capabilities' to learn if colo is supported. The default value for COLO (COarse-Grain LOck Stepping) is disabled. Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161028-1' into ↵Peter Maydell
staging braille fixes and improvements. curses fix, switch to cursesw. gtk bugfixes. # gpg: Signature made Fri 28 Oct 2016 13:05:12 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-ui-20161028-1: curses: Use cursesw instead of curses curses: fix left/right arrow translation ui/gtk: Fix non-working DELETE key gtk: fix compilation warning with gtk 3.22.2 Defer BrlAPI tty acquisition to when guest starts using device Add dots keypresses support to the baum braille device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/vivier/tags/m68k-part2-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Fri 28 Oct 2016 09:44:23 BST # gpg: using RSA key 0xF30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-part2-pull-request: MAINTAINERS: update M68K entry target-m68k: immediate ops manage word and byte operands target-m68k: cmp manages word and bytes operands target-m68k: add/sub manage word and byte operands target-m68k: add addressing modes to neg target-m68k: introduce byte and word cc_ops target-m68k: some bit ops cleanup target-m68k: suba/adda can manage word operand target-m68k: and can manage word and byte operands target-m68k: or can manage word and byte operands target-m68k: eor can manage word and byte operands target-m68k: add addressing modes to not target-m68k: Inline addx, subx, negx target-m68k: add dbcc target-m68k: add addressing modes to scc target-m68k: add exg ops target-m68k: add linkl target-m68k: add bkpt instruction Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' ↵Peter Maydell
into staging ppc patch queue 2016-10-28 This pull request supersedes and extends the one from 2016-10-26 (which had a build bug). Highlights: * SLOF (pseries guest firmware) update * Enable a number of extra testcases on ppc / pseries * Added the 'powernv' machine type - Almost enough to be minimally usable - But still missing necessary interrupt controller updates * Cleanup and consolidation of NVRAM handling on several platforms with related firmware * Substantial cleanup to device tree construction * Some more POWER9 instruction emulation * Cleanup to handling of pseries option vectors and CAS reboot handling (host/guest feature negotiation mechanism) * Significant cleanups to handling of PCI devices in test cases * New hotplug event infrastructure * Memory hot unplug support for pseries * Several bug fixes The NVRAM cleanup affects some Sun sparc platforms as well as ppc ones, but have been tested by the sparc maintainer (Mark Cave-Ayland). The test additions also include substantial general changes to the test framework that aren't strictly ppc related. They don't seem to break tests on other platforms, they're for the benefit of enabling tests on ppc and there isn't a specific maintainer for them, so they're included in this tree. # gpg: Signature made Fri 28 Oct 2016 02:37:19 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits) ppc: allow certain HV interrupts to be delivered to guests spapr: Memory hot-unplug support spapr: use count+index for memory hotplug spapr: Add DRC count indexed hotplug identifier type spapr: add hotplug interrupt machine options spapr_events: add support for dedicated hotplug event source spapr: update spapr hotplug documentation target-ppc: Add xvcmpnesp, xvcmpnedp instructions target-ppc: add xscmp[eq,gt,ge,ne]dp instructions tests: Add pseries machine to the prom-env-test, too spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter libqos: Change PCI accessors to take opaque BAR handle tests: Don't assume structure of PCI IO base in ahci-test tests: Use qpci_mem{read,write} in ivshmem-test libqos: Add 64-bit PCI IO accessors tests: Clean up IO handling in ide-test libqos: Implement mmio accessors in terms of mem{read,write} libqos: Add streaming accessors for PCI MMIO tests: Adjust tco-test to use qpci_legacy_iomap() libqos: Better handling of PCI legacy IO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' ↵Peter Maydell
into staging Merge qio 2016/10/27 v1 # gpg: Signature made Thu 27 Oct 2016 13:54:03 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2016-10-27-1: main: set names for main loop sources created vnc: set name for all I/O channels created migration: set name for all I/O channels created char: set name for all I/O channels created nbd: set name for all I/O channels created io: add ability to set a name for IO channels io: Add a QIOChannelSocket cleanup test io: set LISTEN flag explicitly for listen sockets io: Introduce a qio_channel_set_feature() helper io: Use qio_channel_has_feature() where applicable io: Fix double shift usages on QIOChannel features Conflicts: qemu-char.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Thu 27 Oct 2016 22:15:57 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: qemu-iotests: Test creating floppy drives fdc: Move qdev properties to FloppyDrive fdc: Add a floppy drive qdev fdc: Add a floppy qbus macio: switch over to new byte-aligned DMA helpers dma-helpers: explicitly pass alignment into DMA helpers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Thu 27 Oct 2016 18:15:47 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (23 commits) iotests: Add test for NBD's blockdev-add interface iotests: Add assert_json_filename_equal() method socket_scm_helper: Accept fd directly iotests.py: Allow concurrent qemu instances iotests.py: Add qemu_nbd function qapi: Allow blockdev-add for NBD block/nbd: Use SocketAddress options block/nbd: Accept SocketAddress block/nbd: Add nbd_has_filename_options_conflict() block/nbd: Use qdict_put() block/nbd: Default port in nbd_refresh_filename() block/nbd: Reject port parameter without host block/nbd: Drop trailing "." in error messages qemu-iotests: Fix typo for NFS with IMGOPTSSYNTAX block: Remove bdrv_aio_ioctl() raw: Implement .bdrv_co_ioctl instead of .bdrv_aio_ioctl block: Introduce .bdrv_co_ioctl() driver callback block: Remove bdrv_ioctl() raw-posix: Don't use bdrv_ioctl() block: Use blk_co_ioctl() for all BB level ioctls ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-20161027-2' ↵Peter Maydell
into staging seabios: update to 1.10.0 release. # gpg: Signature made Thu 27 Oct 2016 15:50:54 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-seabios-20161027-2: seabios: update to 1.10.0 release. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28curses: Use cursesw instead of cursesSamuel Thibault
Use ncursesw package instead of curses on non-mingw, and check a few functions. Also take cflags from pkg-config, since cursesw headers may be in a separate, non-default directory. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20161015195308.20473-3-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28curses: fix left/right arrow translationSamuel Thibault
In default VGA font, left/right arrow are glyphs 0x1a and 0x1b, not 0x0a and 0x0b. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Message-id: 20161015195308.20473-2-samuel.thibault@ens-lyon.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28ui/gtk: Fix non-working DELETE keyThomas Huth
GTK generates key events for the delete key with key->string[0] = 0x7f ... but this does not work right with the readline_handle_byte() function in util/readline.c, since this treats the keycode 127 as backspace. So let's add a special case for the GTK delete key to make this key behave right in the monitor interface of the GTK ui. Buglink: https://bugs.launchpad.net/qemu/+bug/1619438 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1477570647-7100-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28gtk: fix compilation warning with gtk 3.22.2Alberto Garcia
gdk_screen_get_width() is deprecated since gtk 3.22.2, use gdk_monitor_get_geometry() instead if it's available. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 20161026152108.12364-1-berto@igalia.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28Defer BrlAPI tty acquisition to when guest starts using deviceSamuel Thibault
We do not want to catch the BrlAPI input/ouput immediately, but only when the guest has started discussing withour virtual device. This notably fixes input before the guest driver has started. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28Add dots keypresses support to the baum braille deviceSamuel Thibault
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-10-28Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20161027-1' into ↵Peter Maydell
staging virtio-gpu: fix memory leak in virtio_gpu_resource_create_2d # gpg: Signature made Thu 27 Oct 2016 15:32:38 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-vga-20161027-1: virtio-gpu: fix memory leak in virtio_gpu_resource_create_2d Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28MAINTAINERS: update M68K entryLaurent Vivier
Add myself to be the M68K maintainer. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <huth@tuxfamily.org>
2016-10-28target-m68k: immediate ops manage word and byte operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: cmp manages word and bytes operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add/sub manage word and byte operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add addressing modes to negLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: introduce byte and word cc_opsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: some bit ops cleanupLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: suba/adda can manage word operandLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: and can manage word and byte operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: or can manage word and byte operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: eor can manage word and byte operandsLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add addressing modes to notLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: Inline addx, subx, negxRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> And add opcodes for 680x0 Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-10-28target-m68k: add dbccLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add addressing modes to sccLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add exg opsLaurent Vivier
Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add linklLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-28target-m68k: add bkpt instructionLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-10-28ppc: allow certain HV interrupts to be delivered to guestsNicholas Piggin
ppc hypervisors have delivered system reset and machine check exception interrupts to guests in some situations (e.g., see FWNMI feature of LoPAPR, or NMI injection in QEMU). These exceptions are architected to set the HV bit in hardware, however when injected into a guest, the HV bit should be cleared. Current code masks off the HV bit before setting the new MSR, however this happens after the interrupt delivery model has calculated delivery mode for the exception. This can result in the guest's MSR LE bit being lost. Account for this in the exception handler and don't set HV bit for guest delivery. Also add another sanity check to ensure similar bugs get caught. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr: Memory hot-unplug supportBharata B Rao
Add support to hot remove pc-dimm memory devices. Since we're introducing a machine-level unplug_request hook, we also had handling for CPU unplug there as well to ensure CPU unplug continues to work as it did before. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> * add hooks to CAS/cmdline enablement of hotplug ACR support * add hook for CPU unplug Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr: use count+index for memory hotplugMichael Roth
Commit 0a417869: spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type dropped per-DRC/per-LMB hotplugs event in favor of a bulk add via a single LMB count value. This was to avoid overrunning the guest EPOW event queue with hotplug events. This works fine, but relies on the guest exhaustively scanning for pluggable LMBs to satisfy the requested count by issuing rtas-get-sensor(DR_ENTITY_SENSE, ...) calls until all the LMBs associated with the DIMM are identified. With newer support for dedicated hotplug event source, this queue exhaustion is no longer as much of an issue due to implementation details on the guest side, but we still try to avoid excessive hotplug events by now supporting both a count and a starting index to avoid unecessary work. This patch makes use of that approach when the capability is available. Cc: bharata@linux.vnet.ibm.com Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr: Add DRC count indexed hotplug identifier typeBharata B Rao
Add support for DRC count indexed hotplug ID type which is primarily needed for memory hot unplug. This type allows for specifying the number of DRs that should be plugged/unplugged starting from a given DRC index. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> * updated rtas_event_log_v6_hp to reflect count/index field ordering used in PAPR hotplug ACR Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr: add hotplug interrupt machine optionsMichael Roth
This adds machine options of the form: -machine pseries,modern-hotplug-events=true -machine pseries,modern-hotplug-events=false If false, QEMU will force the use of "legacy" style hotplug events, which are surfaced through EPOW events instead of a dedicated hot plug event source, and lack certain features necessary, mainly, for memory unplug support. If true, QEMU will enable support for "modern" dedicated hot plug event source. Note that we will still default to "legacy" style unless the guest advertises support for the "modern" hotplug events via ibm,client-architecture-support hcall during early boot. For pseries-2.7 and earlier we default to false, for newer machine types we default to true. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 19:59:29 +0000