Age | Commit message (Collapse) | Author |
|
staging
QAPI patches patches for 2021-01-28
# gpg: Signature made Thu 28 Jan 2021 07:10:21 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2021-01-28:
qapi: More complex uses of QAPI_LIST_APPEND
qapi: Use QAPI_LIST_APPEND in trivial cases
qapi: Introduce QAPI_LIST_APPEND
qapi: A couple more QAPI_LIST_PREPEND() stragglers
net: Clarify early exit condition
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
vnc: fix gtk-vnc compatibility issues.
vnc: vmware svga cleanup
# gpg: Signature made Wed 27 Jan 2021 11:00:59 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ui-20210127-pull-request:
hw/display/vmware_vga: Remove dependency on VNC header
vnc: send extended desktop resize on update requests
Revert "vnc: move initialization to framebuffer_update_request"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Similar to the existing QAPI_LIST_PREPEND, but designed for use where
we want to preserve insertion order. Callers will be added in
upcoming patches. Note the difference in signature: PREPEND takes
List*, APPEND takes List**.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Commit 54aa3de72e switched multiple sites to use QAPI_LIST_PREPEND
instead of open-coding, but missed a couple of spots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210113221013.390592-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
On first glance, the loop in qmp_query_rx_filter() has early return
paths that could leak any allocation of filter_list from a previous
iteration. But on closer inspection, it is obvious that all of the
early exits are guarded by has_name, and that the bulk of the loop
body can be executed at most once if the user is filtering by name,
thus, any early exit coincides with an empty list. Add asserts to
make this obvious.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Rename bitmaps migration tests and move them to tests subdirectory to
demonstrate new human-friendly test naming.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add TestRunner class, which will run tests in a new python iotests
running framework.
There are some differences with current ./check behavior, most
significant are:
- Consider all tests self-executable, just run them, don't run python
by hand.
- Elapsed time is cached in json file
- Elapsed time precision increased a bit
- Instead of using "diff -w" which ignores all whitespace differences,
manually strip whitespace at line end then use python difflib, which
no longer ignores spacing mid-line
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add TestEnv class, which will handle test environment in a new python
iotests running framework.
Don't add compat=1.1 for qcow2 IMGOPTS, as v3 is default anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add python script with new logic of searching for tests:
Current ./check behavior:
- tests are named [0-9][0-9][0-9]
- tests must be registered in group file (even if test doesn't belong
to any group, like 142)
Behavior of findtests.py:
- group file is dropped
- tests are all files in tests/ subdirectory (except for .out files),
so it's not needed more to "register the test", just create it with
appropriate name in tests/ subdirectory. Old names like
[0-9][0-9][0-9] (in root iotests directory) are supported too, but
not recommended for new tests
- groups are parsed from '# group: ' line inside test files
- optional file group.local may be used to define some additional
groups for downstreams
- 'disabled' group is used to temporary disable tests. So instead of
commenting tests in old 'group' file you now can add them to
disabled group with help of 'group.local' file
- selecting test ranges like 5-15 are not supported more
(to support restarting failed ./check command from the middle of the
process, new argument is added: --start-from)
Benefits:
- no rebase conflicts in group file on patch porting from branch to
branch
- no conflicts in upstream, when different series want to occupy same
test number
- meaningful names for test files
For example, with digital number, when some person wants to add some
test about block-stream, he most probably will just create a new
test. But if there would be test-block-stream test already, he will
at first look at it and may be just add a test-case into it.
And anyway meaningful names are better.
This commit doesn't update check behavior (which will be done in
further commit), still, the documentation changed like new behavior is
already here. Let's live with this small inconsistency for the
following few commits, until final change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210125185056.129513-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
check script will be stricter soon about whitespaces, so fix 146.out
now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This tests that trying to write to a (read-only) scsi-cd device backed
by a read-write image file doesn't crash and results in the correct
error.
This is a regression test for https://bugs.launchpad.net/bugs/1906693.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-3-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently, blk_is_read_only() tells whether a given BlockBackend can
only be used in read-only mode because its root node is read-only. Some
callers actually try to answer a slightly different question: Is the
BlockBackend configured to be writable, by taking write permissions on
the root node?
This can differ, for example, for CD-ROM devices which don't take write
permissions, but may be backed by a writable image file. scsi-cd allows
write requests to the drive if blk_is_read_only() returns false.
However, the write request will immediately run into an assertion
failure because the write permission is missing.
This patch introduces separate functions for both questions.
blk_supports_write_perm() answers the question whether the block
node/image file can support writable devices, whereas blk_is_writable()
tells whether the BlockBackend is currently configured to be writable.
All calls of blk_is_read_only() are converted to one of the two new
functions.
Fixes: https://bugs.launchpad.net/bugs/1906693
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-2-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
'remotes/huth-gitlab/tags/pull-request-2021-01-27' into staging
* Patches to speed up and improve the gitlab-CI
* Documentation for the decorators in the "acceptance" tests
* One small rework of a libqtest function
# gpg: Signature made Wed 27 Jan 2021 06:22:11 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2021-01-27:
libqtest: Rework qtest_rsp()
docs/devel: Explain how acceptance tests can be skipped
gitlab-ci.yml: Avoid recompiling the sources in the test jobs
gitlab-ci.yml: Exclude some redundant targets in build-without-default-features
meson: Do not build optional libraries by default
configure: Only check for audio drivers if system-mode is selected
gitlab-ci.yml: Avoid some submodules to speed up the CI a little bit
gitlab-ci: Test building linux-user targets on CentOS 7
tests/docker: Install static libc package in CentOS 7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/edgar/tags/edgar/xilinx-next-2021-01-27.for-upstream' into staging
For upstream
# gpg: Signature made Wed 27 Jan 2021 07:41:20 GMT
# gpg: using RSA key AC44FEDC14F7F1EBEDBF415129C596780F6BCA83
# gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>" [unknown]
# gpg: aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>" [full]
# Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF 4151 29C5 9678 0F6B CA83
* remotes/edgar/tags/edgar/xilinx-next-2021-01-27.for-upstream:
target/microblaze: Add security attributes on memory transactions
target/microblaze: use MMUAccessType instead of int in mmu_translate
target/microblaze: Add use-non-secure property
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In commit 2f487a3d40faff1 we fixed a problem observed with using the
vmware-vga device and the VNC UI frontend in a belt-and-braces
manner:
* we made the VNC frontend handle non-multiple-of-16 surface widths
* we rounded up the vmware-vga display width to a multiple of 16
However this introduced a spurious dependency of a device model on a
UI frontend header. vmware-vga isn't special and should not care
about what UI frontend it is using, and the VNC frontend needs to
handle arbitrary surface widths because other display device models
could use them. Moreover, even if the maximum width in vmware-vga is
made a multiple of 16, the guest itself can always program a
different width.
Remove the dependency on the VNC header. Since we have been using
the rounded-up width value since 2014, stick with it rather than
introducing a behaviour change, but don't calculate it by rounding up
to VNC_DIRTY_BITS_PER_PIXEL any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210112161608.16055-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Unlike other pseudo-encodings these don't break gtk-vnc
because older versions don't suport the extended desktop
resize extension in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210125104041.495274-3-kraxel@redhat.com>
|
|
This reverts commit 9e1632ad07ca49de99da4bb231e9e2f22f2d8df5.
Older gtk-vnc versions can't deal with non-incremental update
requests sending pseudo-encodings, so trying to send full server
state (including desktop size, cursor etc. which is done using
pseudo-encodings) doesn't fly. Return to old behavior to send
those only for new connects and when changes happen.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210125104041.495274-2-kraxel@redhat.com>
|
|
Using the cfg.use_non_secure bitfield and the MMU access type, we can determine
if the access should be secure or not.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-4-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Using MMUAccessType makes it more clear what the variable's use is.
No functional change.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-3-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
This property is used to control the security of the following interfaces
on MicroBlaze:
M_AXI_DP - data interface
M_AXI_IP - instruction interface
M_AXI_DC - dcache interface
M_AXI_IC - icache interface
It works by enabling or disabling the use of the non_secure[3:0] signals.
Interfaces and their corresponding values are taken from:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug984-vivado-microblaze-ref.pdf
page 153.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-2-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
qtest_rsp() is used in two different ways: (1) return some arguments
to caller, which the caller must free, and (2) return no arguments to
caller. Passing non-zero @expected_args gets you (1), and passing
zero gets you (2).
Having "the return value must be freed" depend on an argument this way
is less than ideal.
Provide separate functions for the two ways: (1) qtest_rsp_args()
takes @expected_args (possibly zero), and returns that number of
arguments. Caller must free the return value always. (2) qtest_rsp()
assumes zero, and returns nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210126151649.2220902-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Documented under the "Acceptance tests using the Avocado Framework"
section in testing.rst how environment variables are used to skip tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210115210022.417996-1-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Currently, our check-system-* jobs are recompiling the whole sources
again. This happens due to the fact that the jobs are checking out
the whole source tree and required submodules again, and only try
to use the "build" directory with the binaries and object files as an
artifact from the previous stage - which simply does not work right
anymore (with the current version of meson). Due to some changed
time stamps, meson/ninja are always trying to rebuild the whole tree.
In the long run, we could likely use "meson test --no-rebuild", but
there is still some work going on in that area to improve the user
experience. So until this has been done, simply avoid recompiling the
sources with a trick: pass NINJA=":" to the make process in the test
jobs. Also check out the submodules manually before updating the
timestamps in the build folder, so that the binaries are definitely
newer that all the source files.
This saves ca. 10 - 15 minutes of precious CI cycles in each run.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210126065757.403853-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The build-without-default-features job is running quite long and sometimes
already hits the 1h time limit. Exclude some targets which do not provide
additional test coverage here (since we e.g. also already test other targets
of the same type, just with different endianess, or a 64-bit superset) to
avoid that we hit the timeout here so easily.
Message-Id: <20210126172345.15947-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
into staging
Block patches:
- Make backup block jobs use asynchronous requests with the block-copy
module
- Use COR filter node for stream block jobs
- Make coroutine-sigaltstack’s qemu_coroutine_new() function thread-safe
- Report error string when file locking fails with an unexpected errno
- iotest fixes, additions, and some refactoring
# gpg: Signature made Tue 26 Jan 2021 14:16:59 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2021-01-26: (53 commits)
iotests/178: Pass value to invalid option
iotests/118: Drop 'change' test
iotests: Add test for the regression fixed in c8bf9a9169
block: report errno when flock fcntl fails
simplebench: add bench-backup.py
simplebench: bench_block_job: add cmd_options argument
simplebench/bench_block_job: use correct shebang line with python3
block/block-copy: drop unused argument of block_copy()
block/block-copy: drop unused block_copy_set_progress_callback()
qapi: backup: disable copy_range by default
backup: move to block-copy
block/backup: drop extra gotos from backup_run()
block/block-copy: make progress_bytes_callback optional
iotests: 257: prepare for backup over block-copy
iotests: 219: prepare for backup over block-copy
iotests: 185: prepare for backup over block-copy
iotests/129: Limit backup's max-chunk/max-workers
iotests: 56: prepare for backup over block-copy
qapi: backup: add max-chunk and max-workers to x-perf struct
job: call job_enter from job_pause
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The following libraries will be selected if a feature requires it:
- capstone
- fdt
- SLiRP
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210122204441.2145197-5-philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210122204441.2145197-2-philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Since the meson build system rework, the configure script prefers the
git submodules over the system libraries. So we are testing compilation
with capstone, fdt and libslirp as a submodule all over the place,
burning CPU cycles by recompiling these third party modules and wasting
some network bandwidth in the CI by cloning the submodules each time.
Let's stop doing that in at least a couple of jobs and use the system
libraries instead.
While we're at it, also install meson in the Fedora container, since
it is new enough already, so we do not need to check out the meson
submodule here.
Message-Id: <20210121174451.658924-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a configuration tested by Peter Maydell (see [1] and [2])
but not covered in our CI [3]:
[705/2910] Compiling C object libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
FAILED: libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
../linux-user/strace.c: In function 'do_print_sockopt':
../linux-user/strace.c:2831:14: error: 'IPV6_ADDR_PREFERENCES' undeclared (first use in this function)
case IPV6_ADDR_PREFERENCES:
^
This job currently takes 31 minutes 32 seconds ([4]).
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05086.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05379.html
[3] https://gitlab.com/philmd/qemu/-/jobs/977408284
[4] https://gitlab.com/philmd/qemu/-/jobs/978223286
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210121172829.1643620-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We need to install the static libc package to be able to run
the TCG tests:
$ make check-tcg
...
BUILD TCG tests for x86_64-softmmu
BUILD x86_64-softmmu guest-tests with cc
/usr/bin/ld: hello: warning: allocated section `.notes' not in segment
/usr/bin/ld: memory: warning: allocated section `.notes' not in segment
BUILD TCG tests for x86_64-linux-user
BUILD x86_64-linux-user guest-tests with cc
/usr/bin/ld: cannot find -lpthread
/usr/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status
make[2]: *** [threadcount] Error 1
make[1]: *** [cross-build-guest-tests] Error 2
make: *** [build-tcg-tests-x86_64-linux-user] Error 2
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210121172829.1643620-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
ccd3b3b8112 has deprecated short-hand boolean options (i.e., options
with values). All options without values are interpreted as boolean
options, so this includes the invalid option "snapshot.foo" used in
iotest 178.
So after ccd3b3b8112, 178 fails with:
+qemu-img: warning: short-form boolean option 'snapshot.foo' deprecated
+Please use snapshot.foo=on instead
Suppress that deprecation warning by passing some value to it (it does
not matter which, because the option is invalid anyway).
Fixes: ccd3b3b8112b670fdccf8a392b8419b173ffccb4
("qemu-option: warn for short-form boolean options")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210126123834.115915-1-mreitz@redhat.com>
|
|
Commit 0afec75734331 removed the 'change' QMP command, so we can no
longer test it in 118.
Fixes: 0afec75734331a0b52fa3aa4235220eda8c7846f
('qmp: remove deprecated "change" command')
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210126104833.57026-1-mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210112170540.2912-1-berto@igalia.com>
[mreitz: Add "# group:" line]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
When a call to fcntl(2) for the purpose of adding file locks fails
with an error other than EAGAIN or EACCES, report the error returned
by fcntl.
EAGAIN or EACCES are elided as they are considered to be common
failures, indicating that a conflicting lock is held by another
process.
No errors are elided when removing file locks.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210113164447.2545785-1-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Add script to benchmark new backup architecture.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210116214705.822267-24-vsementsov@virtuozzo.com>
[mreitz: s/not unsupported/not supported/]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Add argument to allow additional block-job options.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-23-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-22-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-21-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Drop unused code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-20-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Further commit will add a benchmark
(scripts/simplebench/bench-backup.py), which will show that backup
works better with async parallel requests (previous commit) and
disabled copy_range. So, let's disable copy_range by default.
Note: the option was added several commits ago with default to true,
to follow old behavior (the feature was enabled unconditionally), and
only now we are going to change the default behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-19-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This brings async request handling and block-status driven chunk sizes
to backup out of the box, which improves backup performance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-18-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-17-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We are going to stop use of this callback in the following commit.
Still the callback handling code will be dropped in a separate commit.
So, for now let's make it optional.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-16-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Iotest 257 dumps a lot of in-progress information of backup job, such
as offset and bitmap dirtiness. Further commit will move backup to be
one block-copy call, which will introduce async parallel requests
instead of plain cluster-by-cluster copying. To keep things
deterministic, allow only one worker (only one copy request at a time)
for this test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-15-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The further change of moving backup to be a one block-copy call will
make copying chunk-size and cluster-size two separate things. So, even
with 64k cluster sized qcow2 image, default chunk would be 1M.
Test 219 depends on specified chunk-size. Update it for explicit
chunk-size for backup as for mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-14-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The further change of moving backup to be a one block-copy call will
make copying chunk-size and cluster-size two separate things. So, even
with 64k cluster sized qcow2 image, default chunk would be 1M.
185 test however assumes, that with speed limited to 64K, one iteration
would result in offset=64K. It will change, as first iteration would
result in offset=1M independently of speed.
So, let's explicitly specify, what test wants: set max-chunk to 64K, so
that one iteration is 64K. Note, that we don't need to limit
max-workers, as block-copy rate limiter will handle the situation and
wouldn't start new workers when speed limit is obviously reached.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-13-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|