| Age | Commit message (Collapse) | Author |
|---|
|
target_arg64 is a generic way to extract 64-bits from a pair of
arguments. On 32-bit platforms, it returns them joined together as
appropriate. On 64-bit platforms, it returns the first arg because it's
already 64-bits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Create target.h. This file is intended to be simple and describe basic
things about the architecture. If something is a basic feature of the
architecture, it belongs here. Should we need something that's per-BSD
there will be a target-os.h that will live in the per-bsd directories.
Define regpairs_aligned to reflect whether or not registers are 'paired'
for 64-bit arguments or not. This will be false for all 64-bit targets,
and will be true on those architectures that pair (currently just armv7
and powerpc on FreeBSD 14.x).
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
An include file that pulls in all the definitions needed for the file
related system calls. This also includes the host definitions to
implement the system calls and some helper routines to lock/unlock
different aspects of the system call arguments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This is useful to analyze changes in the U-Boot RAM driver when SDRAM
training is performed.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Only a limited set of bits are used for decoding the Start and End
addresses of the mapping window of a flash device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
This unifies the way we create the pca9552 devices on the different boards.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
When time permits, we should introduce defines for the HW strapping
registers to cleanly decode the values.
SCU500 = 0x00422016
Disable ARM JTAG trusted world debug: 0x1
Disable ARM JTAG debug: 0x1
VGA Memory Size: 0x1 [16MB]
Cortex M3: 0x1 [Disabled]
Boot device: 0x1 [eMMC]
Reserved: 0x1
SCU510 = 0x80000848
Secure Boot Enable: 0x1
Enable boot SPI or eMMC ABR (second boot): 0x1
Enable LPC mode: 0x1 [LPC]
Disable LPC SuperIO 0x2e/0x4e: 0x1
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: rewrote the commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
This helps quieten booting the current Rainier kernel.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Just a stub that indicates the system has booted in secure boot mode.
Used for testing the driver:
https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/
Signed-off-by: Joel Stanley <joel@jms.id.au>
[ clg: - Fixed typo
- Adjusted Copyright dates ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
It was scheduled for removal in 7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add the helper functions get_errno and host_to_target_errno. get_errno
returns either the system call results, or the -errno when system call
indicates failure by returning -1. Host_to_target_errno returns errno
(since on FreeBSD they are the same on all architectures) along with a
comment about why it's the identity.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
While there is some commonality between *BSD syscall processing, there's
a number of differences and the system call numbers and ABIs have been
independent since the late 90s. Move FreeBSD's proessing here and delete
it.
The upstream implementation is somewhat different than the current
implementation. It will be much easier to upstream these from scratch,
justifying the final result, rather than working out the diffs and
justifying the changes. Also tweak a comment to qemu standard form.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Remove keeping track of which type of bsd we're running on. It's no
longer referenced in the code. Building bsd-user on NetBSD or OpenBSD
isn't possible, let alone running that code. Stop pretending that we can
do the cross BSD thing since there's been a large divergence since 2000
that makes this nearly impossible between FreeBSD and {Net,Open}BSD and
at least quite difficult between NetBSD and OpenBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since we can't run on anything else, assume for the moment that this is
a FreeBSD target. In the future, we'll need to handle this properly via
some include file in bsd-user/*bsd/x86_64/mumble.h. There's a number of
other diffs that would be needed to make things work on OtherBSD, so it
doesn't make sense to preseve this one detail today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since we can't run on anything else, assume for the moment that this is
a FreeBSD target. In the future, we'll need to handle this properly
via some include file in bsd-user/*bsd/arm/mumble.h. There's a number
of other diffs that would be needed to make things work on OtherBSD,
so it doesn't make sense to preseve this one detail today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since we don't build on OpenBSD, only do FreeBSD system calls here. In
the future, we'll need to move this to some place like
bsd-user/freebsd/arm/mumble.h, but until then just leave this
inline. This reflects changes to the upstream.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This doesn't build on openbsd at the moment, and this could
should arguably be in bsd-user/*bsd/i386 somewhere. Until
we refactor to support OpenBSD/NetBSD again, drop it here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This doesn't build on openbsd at the moment, and this could
should arguably be in bsd-user/*bsd/x86_64 somewhere. Until
we refactor to support OpenBSD/NetBSD again, drop it here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
|
|
Although initial versions of NetBSD did use int $80, it was replaced by
syscall before any releases. OpenBSD and FreeBSD always did syscall.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We've not realistically been able to actually run any bsd program on any
other bsd program. They are too diverged to do this easily. The current
code is setup to do it, but implementing it is hard. Stop pretending
that we can do this.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The initrd passed via the command line is loaded into memory. It's
location and size is then added to the device tree so the kernel knows
where to find it.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Using the device tree means that qemu can now directly tell
the kernel what hardware is configured rather than use having
to maintain and update a separate device tree file.
This patch adds automatic device tree generation support for the
OpenRISC simulator. A device tree is built up based on the state of the
configure openrisc simulator.
This is then dumped to memory and the load address is passed to the
kernel in register r3.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QEMU's default screen resolution recently changed to 1280x800, so the
resolution in the screen shot header changed of course, too.
Fixes: de72c4b7cd ("edid: set default resolution to 1280x800 (WXGA)")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221101933.307525-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We previously loaded into in1, but in1 is not filled during
disassembly and hence always zero. This leads to an assertion failure:
qemu-system-s390x: /home/nrb/qemu/include/tcg/tcg.h:654: temp_idx:
Assertion `n >= 0 && n < tcg_ctx->nb_temps' failed.`
Instead, use in2_la2_m64a to load from storage into in2 and pass that to
the helper, which matches what we already do for SCKC.
This fixes the SCK test I sent here under TCG:
<https://www.spinics.net/lists/kvm/msg265169.html>
Fixes: 9dc67537 ("s390x/tcg: implement SET CLOCK ")
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Message-Id: <20220126084201.774457-1-nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Now that we no longer have a limit of 2 CPUs due to fixing the
IRQ routing issues we can increase the max. Here we increase
the limit to 4, we could go higher, but currently OMPIC has a
limit of 4, so we align with that.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Currently the OpenRISC SMP configuration only supports 2 cores due to
the UART IRQ routing being limited to 2 cores. As was done in commit
1eeffbeb11 ("hw/openrisc/openrisc_sim: Use IRQ splitter when connecting
IRQ to multiple CPUs") we can use a splitter to wire more than 2 CPUs.
This patch moves serial initialization out to it's own function and
uses a splitter to connect multiple CPU irq lines to the UART.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Move magic numbers to variables and enums. These will be reused for
upcoming fdt initialization.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This will allow us to attach machine state attributes like
the device tree fdt.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
into staging
Python patches
New functionality in qmp-shell from Dan, and some packaging fixes.
# gpg: Signature made Wed 23 Feb 2022 22:08:35 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jsnow-gitlab/tags/python-pull-request:
MAINTAINERS: python - remove ehabkost and add bleal
Revert "python: pin setuptools below v60.0.0"
Python: add setuptools v60.0 workaround
Python: discourage direct setup.py install
python: support recording QMP session to a file
python: introduce qmp-shell-wrap convenience tool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Eduardo Habkost has left Red Hat and has other daily responsibilities to
attend to. In order to stop spamming him on every series, remove him as
"Reviewer" for the python/ library dir and add Beraldo Leal instead.
For the "python scripts" stanza (which is separate due to level of
support), replace Eduardo as maintainer with myself.
(Thanks for all of your hard work, Eduardo!)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Eduardo Habkost <eduardo@habkost.net>
Message-id: 20220208000525.2601011-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This reverts commit 1e4d8b31be35e54b6429fea54f5ecaa0083f91e7.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220204221804.2047468-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Setuptools v60 and later include a bundled version of distutils, a
deprecated standard library scheduled for removal in future versions of
Python. Setuptools v60 is only possible to install for Python 3.7 and later.
Python has a distutils.sysconfig.get_python_lib() function that returns
'/usr/lib/pythonX.Y' on posix systems. RPM-based systems actually use
'/usr/lib64/pythonX.Y' instead, so Fedora patches stdlib distutils for
Python 3.7 and Python 3.8 to return the correct value.
Python 3.9 and later introduce a sys.platlibdir property, which returns
the correct value on RPM-based systems.
The change to a distutils package not provided by Fedora on Python 3.7
and 3.8 causes a regression in distutils.sysconfig.get_python_lib() that
ultimately causes false positives to be emitted by pylint, because it
can no longer find the system source libraries.
Many Python tools are fairly aggressive about updating setuptools
packages, and so even though this package is a fair bit newer than
Python 3.7/3.8, it's not entirely unreasonable for a given user to have
such a modern package with a fairly old Python interpreter.
Updates to Python 3.7 and Python 3.8 are being produced for Fedora which
will fix the problem on up-to-date systems. Until then, we can force the
loading of platform-provided distutils when running the pylint
test. This is the least-invasive yet most comprehensive fix.
References:
https://github.com/pypa/setuptools/pull/2896
https://github.com/PyCQA/pylint/issues/5704
https://github.com/pypa/distutils/issues/110
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220204221804.2047468-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
When invoking setup.py directly, the default behavior for 'install' is
to run the bdist_egg installation hook, which is ... actually deprecated
by setuptools. It doesn't seem to work quite right anymore.
By contrast, 'pip install' will invoke the bdist_wheel hook
instead. This leads to differences in behavior for the two approaches. I
advocate using pip in the documentation in this directory, but the
'setup.py' which has been used for quite a long time in the Python world
may deceptively appear to work at first glance.
Add an error message that will save a bit of time and frustration
that points the user towards using the supported installation
invocation.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220207213039.2278569-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
When running QMP commands with very large response payloads, it is often
not easy to spot the info you want. If we can save the response to a
file then tools like 'grep' or 'jq' can be used to extract information.
For convenience of processing, we merge the QMP command and response
dictionaries together:
{
"arguments": {},
"execute": "query-kvm",
"return": {
"enabled": false,
"present": true
}
}
Example usage
$ ./scripts/qmp/qmp-shell-wrap -l q.log -p -- ./build/qemu-system-x86_64 -display none
Welcome to the QMP low-level shell!
Connected
(QEMU) query-kvm
{
"return": {
"enabled": false,
"present": true
}
}
(QEMU) query-mice
{
"return": [
{
"absolute": false,
"current": true,
"index": 2,
"name": "QEMU PS/2 Mouse"
}
]
}
$ jq --slurp '. | to_entries[] | select(.value.execute == "query-kvm") |
.value.return.enabled' < q.log
false
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-3-berrange@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
With the current 'qmp-shell' tool developers must first spawn QEMU with
a suitable -qmp arg and then spawn qmp-shell in a separate terminal
pointing to the right socket.
With 'qmp-shell-wrap' developers can ignore QMP sockets entirely and
just pass the QEMU command and arguments they want. The program will
listen on a UNIX socket and tell QEMU to connect QMP to that.
For example, this:
# qmp-shell-wrap -- qemu-system-x86_64 -display none
Is roughly equivalent of running:
# qemu-system-x86_64 -display none -qmp qmp-shell-1234 &
# qmp-shell qmp-shell-1234
Except that 'qmp-shell-wrap' switches the socket peers around so that
it is the UNIX socket server and QEMU is the socket client. This makes
QEMU reliably go away when qmp-shell-wrap exits, closing the server
socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-2-berrange@redhat.com
[Edited for rebase. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging
This misc series of changes:
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-next-pull-request:
docs: expand firmware descriptor to allow flash without NVRAM
MAINTAINERS: take over seccomp from Eduardo Otubo
seccomp: block setns, unshare and execveat syscalls
seccomp: block use of clone3 syscall
seccomp: fix blocking of process spawning
seccomp: add unit test for seccomp filtering
seccomp: allow action to be customized per syscall
block: print the server key type and fingerprint on failure
block: support sha256 fingerprint with pre-blockdev options
block: better document SSH host key fingerprint checking
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request' into staging
Trivial branch pull request 20220222
# gpg: Signature made Tue 22 Feb 2022 16:16:01 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request:
hid: Implement support for side and extra buttons
vdpa: Make ncs autofree
qemu-options: fix incorrect description for '-drive index='
hw/nvram: use at24 macro
target/rx: Remove unused ENV_OFFSET definition
target/avr: Correct AVRCPUClass docstring
configure: Disable capstone and slirp in the --without-default-features mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Simply set the respective bits and update the descriptor accordingly.
Signed-off-by: Noah Bergbauer <noah@statshelix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211126140437.79745-1-noah@statshelix.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Simplifying memory management.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214193415.1606752-2-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
qemu-options.hx contains grammar that a native English-speaking
person would never use.
Replace "This option defines where is connected the drive" by
"This option defines where the drive is connected".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/853
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220202143422.912070-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
* More Meson conversions (0.59.x now required rather than suggested)
* UMIP support for TCG x86
* Fix migration crash
* Restore error output for check-block
# gpg: Signature made Mon 21 Feb 2022 09:35:59 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
configure, meson: move CONFIG_IASL to a Meson option
meson, configure: move ntddscsi API check to meson
meson: require dynamic linking for VSS support
qga/vss-win32: require widl/midl, remove pre-built TLB file
meson: do not make qga/vss-win32/meson.build conditional on C++ presence
configure, meson: replace VSS SDK checks and options with --enable-vss-sdk
qga/vss: use standard windows headers location
qga/vss-win32: use widl if available
meson: drop --with-win-sdk
qga/vss-win32: fix midl arguments
meson: refine check for whether to look for virglrenderer
configure, meson: move guest-agent, tools to meson
configure, meson: move smbd options to meson_options.txt
configure, meson: move coroutine options to meson_options.txt
configure, meson: move some default-disabled options to meson_options.txt
meson: define qemu_cflags/qemu_ldflags
configure, meson: move block layer options to meson_options.txt
configure, meson: move image format options to meson_options.txt
configure, meson: cleanup qemu-ga libraries
configure, meson: move TPM check to meson
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use the macro for going from I2CSlave to EEPROMState.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220119214329.2557049-1-venture@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
The last use of ENV_OFFSET was removed in 5e1401969b
("cpu: Move icount_decr to CPUNegativeOffsetState");
the commit of target/rx came in just afterward.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220203001252.37982-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
There is no 'vr' field in AVRCPUClass.
Likely a copy/paste typo from CRISCPUClass ;)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122001036.83267-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
For the users, it looks a little bit weird that capstone and slirp are
not disabled automatically if they run the configure script with the
"--without-default-features" option, so let's do that now.
Note: fdt is *not* changed accordingly since this affects the targets
that we can build, so disabling fdt automatically here might have
unexpected side-effects for the users.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220221090647.150184-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
'remotes/pmaydell/tags/pull-target-arm-20220221-1' into staging
arm, cocoa and misc:
* MAINTAINERS file updates
* Mark remaining global TypeInfo instances as const
* checkpatch: Ensure that TypeInfos are const
* arm hvf: Handle unknown ID registers as RES0
* Make KVM -cpu max exactly like -cpu host
* Fix '-cpu max' for HVF
* Support PAuth extension for hvf
* Kconfig: Add I2C_DEVICES device group
* Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c bus
* hw/arm/armv7m: Handle disconnected clock inputs
* osdep.h: pull out various things into new header files
* hw/timer: fix a9gtimer vmstate
* hw/arm: add initial mori-bmc board
* ui/cocoa: Remove allowedFileTypes restriction in SavePanel
* ui/cocoa: Do not alert even without block devices
* ui/cocoa: Fix the leak of qemu_console_get_label
# gpg: Signature made Mon 21 Feb 2022 13:30:45 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220221-1: (25 commits)
ui/cocoa: Fix the leak of qemu_console_get_label
ui/cocoa: Do not alert even without block devices
ui/cocoa: Remove allowedFileTypes restriction in SavePanel
hw/arm: add initial mori-bmc board
hw/timer: fix a9gtimer vmstate
MAINTAINERS: Add Akihiko Odaki to macOS-relateds
include: Move hardware version declarations to new qemu/hw-version.h
include: Move qemu_[id]cache_* declarations to new qemu/cacheinfo.h
include: Move QEMU_MAP_* constants to mmap-alloc.h
include: Move qemu_mprotect_*() to new qemu/mprotect.h
include: Move qemu_madvise() and related #defines to new qemu/madvise.h
hw/arm/armv7m: Handle disconnected clock inputs
Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c bus
Kconfig: Add I2C_DEVICES device group
target/arm: Support PAuth extension for hvf
target/arm: Fix '-cpu max' for HVF
target/arm: Unindent unnecessary else-clause
target/arm: Make KVM -cpu max exactly like -cpu host
target/arm: Use aarch64_cpu_register() for 'host' CPU type
target/arm: Move '-cpu host' code to cpu64.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220215080307.69550-14-f4bug@amsat.org
Message-Id: <20220213021329.2066-1-akihiko.odaki@gmail.com>
[PMD: Use g_autofree, suggested by Zoltan BALATON]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
