aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-16report guest crash information in GUEST_PANICKED eventAnton Nefedov
it's not very convenient to use the crash-information property interface, so provide a CPU class callback to get the guest crash information, and pass that information in the event Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16i386/cpu: add crash-information QOM propertyAnton Nefedov
Windows reports BSOD parameters through Hyper-V crash MSRs. This information is very useful for initial crash analysis and thus it would be nice to have a way to fetch it. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16Makefile: avoid leaving the temporary QEMU_PKGVERSION header fileLin Ma
By commit 67a1de0d, When we perform 'git pull && make && sudo make install', In 'make' stage a qemu-version.h.tmp will be generated. If the content of qemu-version.h.tmp and qemu-version.h aren't consistent, The qemu-version.h.tmp will be renamed to qemu-version.h. Because of the target FORCE, The same action will be do again in 'make install' stage. In 'make install' stage, If there is no qemu-version.h.tmp exists and we run 'make install' with sudo, The owner and group of new qemu-version.h.tmp will be privileged user/group. When we run 'make' next time, qemu-version.h.tmp can't be overwritten because of permission issue. This patch removed qemu-version.h.tmp after build to fix this issue. Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <20170215024030.23895-1-lma@suse.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16vl: Move the cpu_synchronize_all_post_init() after generic devices ↵Dou Liyang
initialization At the Qemu initialization, we call the cpu_synchronize_all_post_init() to synchronize All CPU states to KVM in the ./vl.c::main(). Currently, it is called before we initialize the CPUs, which is created by "-device" command and parsed by generic devices initialization, So, these CPUs may be ignored to synchronize. The patch moves the cpu_synchronize_all_post_init func after generic devices initialization to make sure that all the CPUs can be included. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Message-Id: <1485916178-17838-1-git-send-email-douly.fnst@cn.fujitsu.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16qemu-nbd: Implement socket activation.Richard W.M. Jones
Socket activation (sometimes known as systemd socket activation) allows an Internet superserver to pass a pre-opened listening socket to the process, instead of having qemu-nbd open a socket itself. This is done via the LISTEN_FDS and LISTEN_PID environment variables, and a standard file descriptor range. This change partially implements socket activation for qemu-nbd. If the environment variables are set correctly, then socket activation will happen automatically, otherwise everything works as before. The limitation is that LISTEN_FDS must be 1. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170204100317.32425-2-rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16qemu-doc: Clarify that -vga std is now the defaultAlberto Garcia
The QEMU manual page states that Cirrus Logic is the default video card if the user doesn't specify any. However this is not true since QEMU 2.2. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-Id: <20170127094154.19778-1-berto@igalia.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16cpu-exec: remove outermost infinite loopPaolo Bonzini
Reorganize the sigsetjmp so that the restart case falls through to cpu_handle_exception and the execution loop. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16cpu-exec: avoid repeated sigsetjmp on interruptsPaolo Bonzini
The sigsetjmp only needs to be prepared once for the whole execution of cpu_exec. This patch takes care of the "== 0" side, using a nested loop so that cpu_handle_interrupt goes straight back to cpu_handle_exception without doing another sigsetjmp. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16cpu-exec: avoid cpu_loop_exit in cpu_handle_interruptPaolo Bonzini
The siglongjmp goes straight back to the beginning of cpu_exec's outermost loop. We do not need a siglongjmp, we can simply leave the inner TB execution loop. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16cpu-exec: tighten barrier on TCG_EXIT_REQUESTEDPaolo Bonzini
This seems to have worked just fine so far on weakly-ordered architectures, but I don't see anything that prevents the reordering from: store 1 to exit_request store 1 to tcg_exit_req load tcg_exit_req store 0 to tcg_exit_req load exit_request store 0 to exit_request store 1 to exit_request store 1 to tcg_exit_req to this: store 1 to exit_request store 1 to tcg_exit_req load tcg_exit_req load exit_request store 1 to exit_request store 1 to tcg_exit_req store 0 to tcg_exit_req store 0 to exit_request therefore losing a request. It's possible that other memory barriers (e.g. in rcu_read_unlock) are hiding it, but better safe than sorry. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16cpu-exec: fix icount out-of-bounds accessPaolo Bonzini
When icount is active, tb_add_jump is surprisingly called with an out of bounds basic block index. I have no idea how that can work, but it does not seem like a good idea. Clear *last_tb for all TB_EXIT_ICOUNT_EXPIRED cases, even when all you have to do is refill icount_extra. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16hw/char/mcf_uart: QOMify the ColdFire UARTThomas Huth
Use type_init() etc. to adapt the ColdFire UART to the latest QEMU device conventions. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <1485586582-6490-1-git-send-email-huth@tuxfamily.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16gdbstub: Fix vCont behaviourClaudio Imbrenda
When GDB issues a "vCont", QEMU was not handling it correctly when multiple VCPUs are active. For vCont, for each thread (VCPU), it can be specified whether to single step, continue or stop that thread. The default is to stop a thread. However, when (for example) "vCont;s:2" is issued, all VCPUs continue to run, although all but VCPU nr 2 are to be stopped. This patch completely rewrites the vCont parsing code. Please note that this improvement only works in system emulation mode, when in userspace emulation mode the old behaviour is preserved. Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Message-Id: <1487092068-16562-3-git-send-email-imbrenda@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16move vm_start to cpus.cClaudio Imbrenda
This patch: * moves vm_start to cpus.c. * exports qemu_vmstop_requested, since it's needed by vm_start. * extracts vm_prepare_start from vm_start; it does what vm_start did, except restarting the cpus. * vm_start now calls vm_prepare_start and then restarts the cpus. Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Message-Id: <1487092068-16562-2-git-send-email-imbrenda@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16char: drop data written to a disconnected ptyEd Swierk
When a serial port writes data to a pty that's disconnected, drop the data and return the length dropped. This avoids triggering pointless retries in callers like the 16550A serial_xmit(), and causes qemu_chr_fe_write() to write all data to the log file, rather than logging only while a pty client like virsh console happens to be connected. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Message-Id: <1485870329-79428-1-git-send-email-eswierk@skyportsystems.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16apic: reset apic_delivered global variable on machine resetPavel Dovgalyuk
This patch adds call to apic_reset_irq_delivered when the virtual machine is reset. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170131114054.276.62201.stgit@PASHA-ISP> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16qemu-char: socket backend: disconnect on write errorAnton Nefedov
Socket backend read handler should normally perform a disconnect, however the read handler may not get a chance to run if the frontend is not ready (qemu_chr_be_can_write() == 0). This means that in virtio-serial frontend case if - the host has disconnected (giving EPIPE on socket write) - and the guest has disconnected (-> frontend not ready -> backend will not read) - and there is still data (frontend->backend) to flush (has to be a really tricky timing but nevertheless, we have observed the case in production) This results in virtio-serial trying to flush this data continiously forming a busy loop. Solution: react on write error in the socket write handler. errno is not reliable after qio_channel_writev_full(), so we may not get the exact EPIPE, so disconnect on any error but QIO_CHANNEL_ERR_BLOCK which io_channel_send_full() converts to errno EAGAIN. We must not disconnect right away though, there still may be data to read (see 4bf1cb0). Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Daniel P. Berrange <berrange@redhat.com> CC: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1486045589-8074-1-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16test-vmstate: remove yield_until_fd_readablePaolo Bonzini
The function is not needed anymore now that migration is built on top of QIOChannel. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16kvm/ioapic: correct kvm ioapic versionPeter Xu
Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1486106298-3699-4-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16ioapic: fix error report value of def versionPeter Xu
It should be 0x20, rather than 0x11. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1486106298-3699-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16kvm/ioapic: dump real object instead of a fake onePeter Xu
When we do "info ioapic" for kvm ioapic, we were building up a temporary ioapic object. Let's fetch the real one and update correspond to the real object as well. This fixes printing uninitialized version field in ioapic_print_redtbl(). Reported-by: Peter Maydell <peter.maydell@linaro.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1486106298-3699-2-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-14Merge remote-tracking branch 'remotes/rth/tags/pull-or-20170214' into stagingPeter Maydell
Queued openrisc patches # gpg: Signature made Mon 13 Feb 2017 21:21:03 GMT # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-or-20170214: (24 commits) target/openrisc: Optimize for r0 being zero target/openrisc: Tidy handling of delayed branches target/openrisc: Tidy ppc/npc implementation target/openrisc: Optimize l.jal to next target/openrisc: Fix madd target/openrisc: Implement muld, muldu, macu, msbu target/openrisc: Represent MACHI:MACLO as a single unit target/openrisc: Implement msync target/openrisc: Enable trap, csync, msync, psync for user mode target/openrisc: Set flags on helpers target/openrisc: Use movcond where appropriate target/openrisc: Keep SR_CY and SR_OV in a separate variables target/openrisc: Keep SR_F in a separate variable target/openrisc: Invert the decoding in dec_calc target/openrisc: Put SR[OVE] in TB flags target/openrisc: Streamline arithmetic and OVE target/openrisc: Rationalize immediate extraction target/openrisc: Tidy insn dumping target/openrisc: Implement lwa, swa target/openrisc: Fix exception handling status registers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-14target/openrisc: Optimize for r0 being zeroRichard Henderson
The HW does not special-case r0, but the ABI specifies that r0 should contain 0. If we expose this fact to the optimizer, we can simplify a lot of the generated code. We must of course verify that r0==0, but that is trivial to do with a TB flag. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Tidy handling of delayed branchesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Tidy ppc/npc implementationRichard Henderson
The NPC SPR is really only supposed to be used for FPGA debugging. It contains the same contents as PC, unless one plays games. Follow the or1ksim implementation in flushing delayed branch state when it is changed. The PPC SPR need not be updated every instruction, merely when we exit the TB or attempt to read its contents. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Optimize l.jal to nextRichard Henderson
This allows the tcg optimizer to see, and fold, all of the constants involved in a GOT base register load sequence. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Fix maddRichard Henderson
Note that the specification for lf.madd.s is confused. It's the only mention of supposed FPMADDHI/FPMADDLO special registers. On the other hand, or1ksim implements a somewhat normal non-fused multiply and add. Mirror that. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Implement muld, muldu, macu, msbuRichard Henderson
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Represent MACHI:MACLO as a single unitRichard Henderson
Significantly simplifies the implementation of the use of MAC. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Implement msyncRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Enable trap, csync, msync, psync for user modeRichard Henderson
Not documented as disabled for user mode. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Set flags on helpersRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Use movcond where appropriateRichard Henderson
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Keep SR_CY and SR_OV in a separate variablesRichard Henderson
This significantly streamlines carry and overflow production. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Keep SR_F in a separate variableRichard Henderson
This avoids having to keep merging and extracting the flag from SR. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Invert the decoding in dec_calcRichard Henderson
Decoding the opcodes in the right order reduces by 100+ lines. Also, it happens to put the opcodes in the same order as Chapter 17. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Put SR[OVE] in TB flagsRichard Henderson
Removes a call at execution time for overflow exceptions. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Streamline arithmetic and OVERichard Henderson
Fix incorrect overflow calculation. Move overflow exception check to a helper function, to eliminate inline branches. Remove some incorrect special casing of R0. Implement multiply inline. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Rationalize immediate extractionRichard Henderson
The architecture manual is consistent in using "I" for signed fields and "K" for unsigned fields. Mirror that. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Tidy insn dumpingRichard Henderson
Avoids warnings from unused variables etc. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Implement lwa, swaRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Fix exception handling status registersStafford Horne
I am working on testing instruction emulation patches for the linux kernel. During testing I found these 2 issues: - sets DSX (delay slot exception) but never clears it - EEAR for illegal insns should point to the bad exception (as per openrisc spec) but its not This patch fixes these two issues by clearing the DSX flag when not in a delay slot and by setting EEAR to exception PC when handling illegal instruction exceptions. After this patch the openrisc kernel with latest patches boots great on qemu and instruction emulation works. Cc: qemu-trivial@nongnu.org Cc: openrisc@lists.librecores.org Signed-off-by: Stafford Horne <shorne@gmail.com> Message-Id: <20170113220028.29687-1-shorne@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14linux-user: Honor CLONE_SETTLS for openriscRichard Henderson
Threads work much better when you set the TLS register. This was fixed in the upstream kernel for Linux 4.9. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14linux-user: Fix openrisc cpu_loopRichard Henderson
We need to handle EXCP_DEBUG and EXCP_INTERRUPT. We need to send signals to the guest using queue_signal. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14linux-user: Add MMAP_SHIFT for openriscRichard Henderson
The page size on openrisc is 8k. Sync the shift required for the mmap2 syscall. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-14target/openrisc: Rename the cpu from or32 to or1kRichard Henderson
This is in keeping with the toolchain and or1ksim. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-13Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20170213a' into staging Migration Amit: migration: remove myself as maintainer MAINTAINERS: update my email address Ashijeet: migrate: Introduce zero RAM checks to skip RAM migration Pavel: Postcopy release RAM Halil: consolidate VMStateField.start Hailiang: COLO: fix setting checkpoint-delay not working properly COLO: Shutdown related socket fd while do failover COLO: Don't process failover request while loading VM's state Me: migration: Add VMSTATE_UNUSED_VARRAY_UINT32 migration: Add VMSTATE_WITH_TMP tests/migration: Add test for VMSTATE_WITH_TMP virtio-net VMState conversion and new VMSTATE macros # gpg: Signature made Mon 13 Feb 2017 17:36:39 GMT # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170213a: virtio/migration: Migrate virtio-net to VMState tests/migration: Add test for VMSTATE_WITH_TMP migration: Add VMSTATE_WITH_TMP migration: Add VMSTATE_UNUSED_VARRAY_UINT32 COLO: Don't process failover request while loading VM's state COLO: Shutdown related socket fd while do failover COLO: fix setting checkpoint-delay not working properly migration: consolidate VMStateField.start migrate: Introduce zero RAM checks to skip RAM migration migration: discard non-dirty ram pages after the start of postcopy add 'release-ram' migrate capability migration: add MigrationState arg for ram_save_/compressed_/page() MAINTAINERS: update my email address migration: remove myself as maintainer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-13virtio/migration: Migrate virtio-net to VMStateDr. David Alan Gilbert
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20170203160651.19917-5-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merge fix against Halil's removal of the '_start' field in VMSTATE_VBUFFER_MULTIPLY
2017-02-13tests/migration: Add test for VMSTATE_WITH_TMPDr. David Alan Gilbert
Add a test for VMSTATE_WITH_TMP to tests/test-vmstate.c Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170203160651.19917-4-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-13migration: Add VMSTATE_WITH_TMPDr. David Alan Gilbert
VMSTATE_WITH_TMP is for handling structures where some calculation or rearrangement of the data needs to be performed before the data hits the wire. For example, where the value on the wire is an offset from a non-migrated base, but the data in the structure is the actual pointer. To use it, a temporary type is created and a vmsd used on that type. The first element of the type must be 'parent' a pointer back to the type of the main structure. VMSTATE_WITH_TMP takes care of allocating and freeing the temporary before running the child vmsd. The post_load/pre_save on the child vmsd can copy things from the parent to the temporary using the parent pointer and do any other calculations needed; it can then use normal VMSD entries to do the actual data storage without having to fiddle around with qemu_get_*/qemu_put_* Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20170203160651.19917-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-13 07:42:41 +0000