aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-24target-mips: remove POOL48A from the microMIPS decodingAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24tcg: mark local temps as MEM in dead_temp()Aurelien Jarno
In dead_temp, local temps should always be marked as back to memory, even if they have not been allocated (i.e. they are discared before cross a basic block). It fixes the following assertion in target-xtensa: qemu-system-xtensa: tcg/tcg.c:1665: temp_save: Assertion `s->temps[temp].val_type == 2 || s->temps[temp].fixed_reg' failed. Aborted Reported-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Clean up microMIPS32 major opcode陳韋任 (Wei-Ren Chen)
I check MIPS microMIPS manual [1], and found the major opcode might be wrong. I add a comment to explicitly indicate what manual I am refering to, and according that manual I remove microMIPS32 major opcodes 0x1f. As for others, like 0x16, 0x17, 0x36 and 0x37, they are for higher-order MIPS ISA level or new revision of this microMIPS architecture. Quote from Johnson, they are belong MIPS64 [2]. [1] http://www.mips.com/products/architectures/micromips/#specifications MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set (Revision 3.05) MD00582-2B-microMIPS-AFP-03.05.pdf [2] http://www.mips.com/products/architectures/mips64/ MIPS Architecture For Programmers Volume II-A: The MIPS64 Instruction Set MD00087-2B-MIPS64BIS-AFP-03.51.pdf Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Add comments on POOL32Axf encoding陳韋任 (Wei-Ren Chen)
Current QEMU MIPS POOL32AXF encoding comes from microMIPS32 and microMIPS32 DSP. Add comment here to help reading. Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-openrisc: remove conflicting definitions from cpu.hAurelien Jarno
On an ARM host, the registers definitions from cpu.h clash with /usr/include/sys/ucontext.h. As there are unused, just remove them. Cc: Jia Liu <proljc@gmail.com> Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24tcg/arm: fix cross-endian qemu_st16Aurelien Jarno
The bswap16 TCG opcode assumes that the high bytes of the temp equal to 0 before calling it. The ARM backend implementation takes this assumption to slightly optimize the generated code. The same implementation is called for implementing the cross-endian qemu_st16 opcode, where this assumption is not true anymore. One way to fix that would be to zero the high bytes before calling it. Given the store instruction just ignore them, it is possible to provide a slightly more optimized version. With ARMv6+ the rev16 instruction does the work correctly. For lower ARM versions the patch provides a version which behaves correctly with non-zero high bytes, but fill them with junk. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24tcg/arm: fix TLB access in qemu-ld/st opsAurelien Jarno
The TCG arm backend considers likely that the offset to the TLB entries does not exceed 12 bits for mem_index = 0. In practice this is not true for at least the MIPS target. The current patch fixes that by loading the bits 23-12 with a separate instruction, and using loads with address writeback, independently of the value of mem_idx. In total this allow a 24-bit offset, which is a lot more than needed. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-21qemu-sockets: Fix parsing of the inet option 'to'.Anthony PERARD
Having a qemu command line argument like "-vnc 127.0.0.1:0,to=99" is broken. This have been break with commit 879e45c72da1569e07fbbc6a1aa2a708ea796044. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2012-11-21tcg/ppc: Fix !softmmu casemalc
Signed-off-by: malc <av1474@comtv.ru>
2012-11-19Update version for 1.3.0-rc0 releasev1.3.0-rc0Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19audio/audio_pt_int: Clarify licensingmalc
Signed-off-by: malc <av1474@comtv.ru>
2012-11-19audio/wavcapture: Clarify licensingmalc
Signed-off-by: malc <av1474@comtv.ru>
2012-11-19tcg/ppc: Remove unused s_bits variablemalc
Thanks to Alexander Graf for heads up. Signed-off-by: malc <av1474@comtv.ru>
2012-11-19Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
* kiszka/queues/slirp: slirp: Add domain-search option to slirp's DHCP server slirp: Don't crash on packets from 0.0.0.0/8. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'bonzini/build-urgent' into stagingAnthony Liguori
* bonzini/build-urgent: Makefile: Add missing dependency (fix parallel builds) tests: link in stubs libcacard: link in stubs libcacard: make unnesting rules available to Makefile.objs Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (26 commits) qemu-io: Use bdrv_drain_all instead of qemu_aio_flush megasas: Use bdrv_drain_all instead of qemu_aio_flush vmdk: Fix data corruption bug in WRITE and READ handling fdc: remove last usage of FD_STATE_SEEK fdc: fix typo in zero constant fdc: remove double affectation of FD_MSR_CMDBUSY flag fdc-tests: add tests for VERIFY command fdc: implement VERIFY command fdc-test: Check READ ID fdc: fix false FD_SR0_SEEK fdc: fix FD_SR0_SEEK for initial seek on DMA transfers fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers fdc: use status0 field instead of a local variable fdc-test: add tests for non-DMA READ command fdc-test: insert media before fuzzing registers fdc-test: split test_media_change() test, so insert part can be reused fdc: Remove status0 parameter from fdctrl_set_fifo() aio: rename AIOPool to AIOCBInfo aio: use g_slice_alloc() for AIOCB pooling aio: switch aiocb_size type int -> size_t ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'kraxel/usb.71' into stagingAnthony Liguori
* kraxel/usb.71: usb-host: fix splitted transfers usb-host: update tracing usb-redir: Set default debug level to warning usb-redir: Only add actually in flight packets to the in flight queue ehci: handle dma errors ehci: keep the frame timer running in case the guest asked for frame list rollover interrupts ehci: Don't verify the next pointer for periodic qh-s and qtd-s ehci: Better detection for qtd-s linked in circles ehci: Fixup q->qtdaddr after cancelling an already completed packet ehci: Don't access packet after freeing it usb: host-linux: Ignore parsing errors of the device descriptors usb-host: scan for usb devices when the vm starts usb: Fix (another) bug in usb_packet_map() for IOMMU handling fix live migration Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
* stefanha/tracing: trace: Remove "info trace" from documents trace: document '-' syntax for disabling events trace: allow disabling events in events file Avoid all systemtap reserved words Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'amit/loadvm-irq-inj-fix' into stagingAnthony Liguori
* amit/loadvm-irq-inj-fix: virtio-serial-bus: post_load send_event when vm is running Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
* afaerber/qom-cpu: target-i386: Add Haswell CPU model target-i386/cpu: Add new Opteron CPU model target-i386/cpu: Name new CPUID bits qapi-types.h: Don't include qemu-common.h osdep: Move qemu_{open,close}() prototypes qemu-config.h: Include headers it needs vnc-palette.h: Include <stdbool.h> qemu-fsdev-dummy.c: Include module.h qdev: Split up header so it can be used in cpu.h Move qemu_irq typedef out of qemu-common.h qemu-common.h: Comment about usage rules Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: kvm: Actually remove software breakpoints from list on cleanup acpi_piix4: fix migration of gpe fields Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19rng-random: only build on POSIX platformsAnthony Liguori
There is no /dev/random on win32. Cc: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-19Makefile: Add missing dependency (fix parallel builds)Stefan Weil
The executables in i386-softmmu, i386-linux-user, ... depend on the recently added libqemustub.a. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-19tests: link in stubsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-19libcacard: link in stubsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-19libcacard: make unnesting rules available to Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-18tci: Support deposit operationsStefan Weil
The operations for INDEX_op_deposit_i32 and INDEX_op_deposit_i64 are now supported and enabled by default. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-18tci: Fix build breakage (unresolved symbol tcg_out_tb_finalize)Stefan Weil
Commit 32761257c0b9fa7ee04d2871a6e48a41f119c469 enabled qemu_ld/st optimization unconditionally for some hosts. The TCG interpreter still does not support this kind of optimization. Therefore builds with TCI fail with an unresolved symbol tcg_out_tb_finalize. This is fixed here. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-18tci: fix build breakage for target MIPSStefan Weil
commit 5f7319cd introduced GETPC() usage for MIPS, which is currently not defined when building with --enable-tcg-interpreter. Add MIPS to the list of targets we selectively define GETPC() for. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-18build: replace weak symbols with a static libraryPaolo Bonzini
Weak symbols were a nice idea, but they turned out not to be a good one. Toolchain support is just too sparse, in particular llvm-gcc is totally broken. This patch uses a surprisingly low-tech approach: a static library. Symbols in a static library are always overridden by symbols in an object file. Furthermore, if you place each function in a separate source file, object files for unused functions will not be taken in. This means that each function can use all the dependencies that it needs (especially QAPI stuff such as error_setg). Thus, all stubs are placed in separate object files and put together in a static library. The library then is linked to all programs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17libseccomp: require version 1.0.0Blue Swirl
Debian Wheezy has version 0.1.0 which is not compatible, avoid it. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17Merge branch 'vga.1' of git://git.kraxel.org/qemuBlue Swirl
* 'vga.1' of git://git.kraxel.org/qemu: vga: fix mmio vga register mapping vga: fix bochs alignment issue
2012-11-17TCG: Remove unused global variablesEvgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opparam_buf from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opparam_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17tcg/tcg.h: Duplicate global TCG variables in TCGContextEvgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17target-cris/translate.c: Code style clean-upEvgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-16rng-egd: don't use gslist_free_fullAnthony Liguori
This function was only introduced in glib 2.28.0. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16virtio-rng-pci: create a default backend if none existsAnthony Liguori
This allows you to specify: $ qemu -device virtio-rng-pci And things will Just Work with a reasonable default. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16virtio-rng: add rate limiting supportAnthony Liguori
This adds parameters to virtio-rng-pci to allow rate limiting the entropy a guest receives. An example command line: $ qemu -device virtio-rng-pci,max-bytes=1024,period=1000 Would limit entropy collection to 1Kb/s. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16virtio-rng: hardware random number generator deviceAmit Shah
The Linux kernel already has a virtio-rng driver, this is the device implementation. When the guest asks for entropy from the virtio hwrng, it puts a buffer in the vq. We then put entropy into that buffer, and push it back to the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- aliguori: converted to new RngBackend interface aliguori: remove entropy needed event aliguori: fix migration
2012-11-16rng-egd: introduce EGD compliant RNG backendAnthony Liguori
This backend talks EGD to a CharDriverState. A typical way to invoke this would be: qemu -chardev socket,host=localhost,port=1024,id=chr0 \ -object rng-egd,chardev=chr0,id=egd0 \ -device virtio-rng-pci,rng=egd0 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16rng-random: add an RNG backend that uses /dev/random (v3)Anthony Liguori
The filename can be overridden but it expects a non-blocking source of entropy. A typical invocation would be: qemu -object rng-random,id=rng0 -device virtio-rng-pci,rng=rng0 This can also be used with /dev/urandom by using the command line: qemu -object rng-random,filename=/dev/urandom,id=rng0 \ -device virtio-rng-pci,rng=rng0 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - merged header split patch into this one v2 -> v3 - bug fix in rng-random (Paolo)
2012-11-16rng: add RndBackend abstract object classAnthony Liguori
This is the backend used by devices that need to request entropy. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16object: add object_property_add_bool (v2)Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - Fix whitespace (Andreas Faerber)
2012-11-16vl: add -object option to create QOM objects from the command lineAnthony Liguori
This will create a new QOM object in the '/objects' path. Note that properties are set in order which allows for simple objects to be initialized entirely with this option and then realized. This option is roughly equivalent to -device but for things that are not devices. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16trace: Remove "info trace" from documentsLiming Wang
commit 88affa1c monitor: remove unused do_info_trace has removed "info trace" function from monitor, so remove it from documents. Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-16trace: document '-' syntax for disabling eventsStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 14:58:18 +0000