aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-21target-sh4: Use new qemu_ld/st opcodesAurelien Jarno
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-21target-mips: Use new qemu_ld/st opcodesAurelien Jarno
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-21tcg/i386: fix a commentAurelien Jarno
The comments apply to 8-bit stores, not 8-byte stores. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-19Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream' into stagingAnthony Liguori
Patch queue for ppc - 2013-12-20 Alexander Graf (3): PPC: Use default pci bus name for grackle and heathrow roms: Flush icache when writing roms to guest memory PPC: Add VSX to hflags Alexey Kardashevskiy (5): powerpc: add PVR mask support target-ppc: move POWER7+ to a separate family spapr-rtas: replace return code constants with macros spapr-rtas: add ibm, (get|set)-system-parameter spapr: make sure RMA is in first mode of first memory node Greg Kurz (1): target-ppc: add stubs for KVM breakpoints Paolo Bonzini (1): spapr: tie spapr-nvram to -pflash Paul Mackerras (1): spapr: limit numa memory regions by ram size Peter Crosthwaite (2): device_tree: s/qemu_devtree/qemu_fdt globally device_tree: qemu_fdt_setprop: Rename val_array arg Tom Musta (19): Declare and Enable VSX Add MSR VSX and Associated Exception Add VSX Instruction Decoders Add VSR to Global Registers Add lxvd2x Add stxvd2x Add xxpermdi Add lxsdx Add lxvdsx Add lxvw4x Add stxsdx Add stxvw4x Add VSX Scalar Move Instructions Add VSX Vector Move Instructions Add Power7 VSX Logical Instructions Add xxmrgh/xxmrgl Add xxsel Add xxspltw Add xxsldwi * agraf/tags/signed-ppc-for-upstream: (32 commits) spapr: limit numa memory regions by ram size spapr: make sure RMA is in first mode of first memory node device_tree: qemu_fdt_setprop: Rename val_array arg device_tree: s/qemu_devtree/qemu_fdt globally PPC: Add VSX to hflags Add xxsldwi Add xxspltw Add xxsel Add xxmrgh/xxmrgl Add Power7 VSX Logical Instructions Add VSX Vector Move Instructions Add VSX Scalar Move Instructions roms: Flush icache when writing roms to guest memory spapr: tie spapr-nvram to -pflash PPC: Use default pci bus name for grackle and heathrow spapr-rtas: add ibm, (get|set)-system-parameter spapr-rtas: replace return code constants with macros target-ppc: move POWER7+ to a separate family Add stxvw4x Add stxsdx ...
2013-12-20spapr: limit numa memory regions by ram sizePaul Mackerras
This makes sure that all NUMA memory blocks reside within RAM or have zero length. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20spapr: make sure RMA is in first mode of first memory nodeAlexey Kardashevskiy
The SPAPR specification says that the RMA starts at the LPAR's logical address 0 and is the first logical memory block reported in the LPAR’s device tree. So SLOF only maps the first block and that block needs to span the full RMA. This makes sure that the RMA area is where SLOF expects it. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20device_tree: qemu_fdt_setprop: Rename val_array argPeter Crosthwaite
Looking at the implementation, this doesn't really have a lot to do with arrays. Its just a pointer to a buffer and is passed through to the wrapped fn (qemu_fdt_setprop) unchanged. So rename to make it consistent with libfdt, which in the wrapped function just calls it "val". Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20device_tree: s/qemu_devtree/qemu_fdt globallyPeter Crosthwaite
The qemu_devtree API is a wrapper around the fdt_ set of APIs. Rename accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [agraf: also convert hw/arm/virt.c] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20PPC: Add VSX to hflagsAlexander Graf
We generate different code depending on whether MSR_VSX is set or clear, so it needs to be part of our hflags too which indicate whether we're still in the same translation block cache bucket. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add xxsldwiTom Musta
This patch adds the VSX Shift Left Double by Word Immediate (xxsldwi) instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add xxspltwTom Musta
This patch adds the VSX Splat Word (xxsplatw) instruction. This is the first instruction to use the UIM immediate field and consequently a decoder is also added. V2: reworked implementation per Richard Henderson's comments. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add xxselTom Musta
This patch adds the VSX Select (xxsel) instruction. The xxsel instruction has four VSR operands. Thus the xC instruction decoder is added. The xxsel instruction is massively overloaded in the opcode table since only bits 26 and 27 are opcode bits. This overloading is done in matrix fashion with two macros (GEN_XXSEL_ROW and GEN_XX_SEL). V2: (1) eliminated unecessary XXSEL macro (2) tighter implementation using tcg_gen_andc_i64. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add xxmrgh/xxmrglTom Musta
This patch adds the VSX Merge High Word and VSX Merge Low Word instructions. V2: Now implemented using deposit (per Richard Henderson's comment) Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add Power7 VSX Logical InstructionsTom Musta
This patch adds the VSX logical instructions that are defined by the Version 2.06 Power ISA (aka Power7): - xxland - xxlandc - xxlor - xxlxor - xxlnor Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add VSX Vector Move InstructionsTom Musta
This patch adds the vector move instructions: - xvabsdp - Vector Absolute Value Double-Precision - xvnabsdp - Vector Negative Absolute Value Double-Precision - xvnegdp - Vector Negate Double-Precision - xvcpsgndp - Vector Copy Sign Double-Precision - xvabssp - Vector Absolute Value Single-Precision - xvnabssp - Vector Negative Absolute Value Single-Precision - xvnegsp - Vector Negate Single-Precision - xvcpsgnsp - Vector Copy Sign Single-Precision V3: Per Paolo Bonzini's suggestion, used a temporary for the sign mask and andc. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add VSX Scalar Move InstructionsTom Musta
This patch adds the VSX scalar move instructions: - xsabsdp (Scalar Absolute Value Double-Precision) - xsnabspd (Scalar Negative Absolute Value Double-Precision) - xsnegdp (Scalar Negate Double-Precision) - xscpsgndp (Scalar Copy Sign Double-Precision) A common generator macro (VSX_SCALAR_MOVE) is added since these instructions vary only slightly from each other. Macros to support VSX XX2 and XX3 form opcodes are also added. These macros handle the overloading of "opcode 2" space (instruction bits 26:30) caused by AX and BX bits (29 and 30, respectively). V3: Per feedback from Paolo Bonzini, moved the sign mask into a temporary and used andc. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20roms: Flush icache when writing roms to guest memoryAlexander Graf
We use the rom infrastructure to write firmware and/or initial kernel blobs into guest address space. So we're basically emulating the cache off phase on very early system bootup. That phase is usually responsible for clearing the instruction cache for anything it writes into cachable memory, to ensure that after reboot we don't happen to execute stale bits from the instruction cache. So we need to invalidate the icache every time we write a rom into guest address space. We do not need to do this for every DMA since the guest expects it has to flush the icache manually in that case. This fixes random reboot issues on e5500 (booke ppc) for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20spapr: tie spapr-nvram to -pflashPaolo Bonzini
spapr-nvram's drive property is currently connected to a non-existent "-machine nvram=<drivename>" option. Instead, tie it to -pflash like other non-volatile RAM devices. This provides the following possibilities for adding a backend for the sPAPR non-volatile RAM: * -pflash filename * -drive if=pflash,file=filename,format=raw,... * -drive if=none,file=filename,format=raw,id=foo,... -global spapr-nvram.drive=foo Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20PPC: Use default pci bus name for grackle and heathrowAlexander Graf
There's no good reason to call our bus "pci" rather than let the default bus name take over ("pci.0"). The big downside to calling it different from anyone else is that tools that pass -device get confused. They are looking for a bus "pci.0" rather than "pci". To make life easier for everyone, let's just drop the name override. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20spapr-rtas: add ibm, (get|set)-system-parameterAlexey Kardashevskiy
This adds very basic handlers for ibm,get-system-parameter and ibm,set-system-parameter RTAS calls. The only parameter handled at the moment is "platform-processor-diagnostics-run-mode" which is always disabled and does not support changing. This is expected to make "ppc64_cpu --run-mode=1" happy. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: s/papameter/parameter/g] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20spapr-rtas: replace return code constants with macrosAlexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20target-ppc: move POWER7+ to a separate familyAlexey Kardashevskiy
So far POWER7+ was a part of POWER7 family. However it has a different PVR base value so in order to support PVR masks, it needs a separate family class. This adds a new family class, PVR base and mask values and moves Power7+ v2.1 CPU to a new family. The class init function is copied from the POWER7 family. This defines a firmware name for the new family as "PowerPC,POWER7+" instead of previously used "PowerPC,POWER7" from the POWER7 family. The reason for that is that the Sapphire firmware (a h0st firmware) uses "PowerPC,POWER7+" already and since no specification defines exactly the CPU nodes naming in the device tree, we better stay in sync with the host firmware. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add stxvw4xTom Musta
This patch adds the Store VSX Vector Word*4 Indexed (stxvw4x) instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add stxsdxTom Musta
This patch adds the Store VSX Scalar Doubleword Indexed (stxsdx) instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add lxvw4xTom Musta
This patch adds the Load VSX Vector Word*4 Indexed (lxvw4x) instruction. V2: changed to use deposit_i64 per Richard Henderson's review. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add lxvdsxTom Musta
This patch adds the Load VSX Vector Doubleword & Splat Indexed (lxvdsx) instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add lxsdxTom Musta
This patch adds the Load VSX Scalar Doubleowrd Indexed (lxsdx) instruction. The lower 8 bytes of the target register are undefined; this implementation leaves those bytes unaltered. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add xxpermdiTom Musta
This patch adds the xxpermdi instruction. The instruction uses bits 22, 23, 29 and 30 for non-opcode fields (DM, AX and BX). This results in overloading of the opcode table with aliases, which can be seen in the GEN_XX3FORM_DM macro. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add stxvd2xTom Musta
This patch adds the stxvd2x instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add lxvd2xTom Musta
This patch adds the lxvd2x instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add VSR to Global RegistersTom Musta
This patch adds VSX VSRs to the the list of global register indices. More specifically, it adds the lower halves of the first 32 VSRs to the list of global register indices. The upper halves of the first 32 VSRs are already defined via cpu_fpr[]. And the second 32 VSRs are already defined via the cpu_avrh[] and cpu_avrl[] arrays. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add VSX Instruction DecodersTom Musta
This patch adds decoders for the VSX fields XT, XS, XA, XB and DM. The first four are split fields and a general helper for these types of fields is also added. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Add MSR VSX and Associated ExceptionTom Musta
This patch adds support for the VSX bit of the PowerPC Machine State Register (MSR) as well as the corresponding VSX Unavailable exception. The VSX bit is added to the defined bits masks of the Power7 and Power8 CPU models. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20Declare and Enable VSXTom Musta
This patch adds the flag POWERPC_FLAG_VSX to the list of defined flags and also adds this flag to the list of supported features of the Power7 and Power8 CPUs. Additionally, the VSX instructions are added to the list of TCG-enabled instruction. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20powerpc: add PVR mask supportAlexey Kardashevskiy
IBM POWERPC processors encode PVR as a CPU family in higher 16 bits and a CPU version in lower 16 bits. Since there is no significant change in behavior between versions, there is no point to add every single CPU version in QEMU's CPU list. Also, new CPU versions of already supported CPU won't break the existing code. This adds PVR value/mask support for KVM, i.e. for -cpu host option. As CPU family class name for POWER7 is "POWER7-family", there is no need to touch aliases. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20target-ppc: add stubs for KVM breakpointsGreg Kurz
The latest update to v3.13-rc3 (bf63839f) breaks the ppc build with KVM: kvm-all.o: In function `kvm_update_guest_debug': kvm-all.c:1910: undefined reference to `kvm_arch_update_guest_debug' kvm-all.o: In function `kvm_insert_breakpoint': kvm-all.c:1937: undefined reference to `kvm_arch_insert_sw_breakpoint' kvm-all.c:1945: undefined reference to `kvm_arch_insert_hw_breakpoint' kvm-all.o: In function `kvm_remove_breakpoint': kvm-all.c:1977: undefined reference to `kvm_arch_remove_sw_breakpoint' kvm-all.c:1985: undefined reference to `kvm_arch_remove_hw_breakpoint' kvm-all.o: In function `kvm_remove_all_breakpoints': kvm-all.c:2009: undefined reference to `kvm_arch_remove_sw_breakpoint' kvm-all.c:2006: undefined reference to `kvm_arch_remove_sw_breakpoint' kvm-all.c:2017: undefined reference to `kvm_arch_remove_all_hw_breakpoints' We need stubs until something gets implemented. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-19Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20131217' into ↵Anthony Liguori
staging target-arm queue: * AES instruction support for 32 bit ARM * pflash01: much better emulation of 2x16bit and similar configs where multiple flash devices are banked together * fixed CBAR handling on Zynq, Highbank * initial AArch64 KVM control support * first two chunks of patches for A64 instruction emulation * new board: canon-a1100 (Canon DIGIC SoC) * new board: cubieboard (Allwinner A10 SoC) # gpg: Signature made Tue 17 Dec 2013 12:18:39 PM PST using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Alexander Graf (14) and others # Via Peter Maydell * pmaydell/tags/pull-target-arm-20131217: (62 commits) MAINTAINERS: add myself to maintain allwinner-a10 hw/arm: add cubieboard support hw/arm: add allwinner a10 SoC support hw/intc: add allwinner A10 interrupt controller hw/timer: add allwinner a10 timer vmstate: Add support for an array of ptimer_state * MAINTAINERS: Document 'Canon DIGIC' machine hw/arm/digic: add NOR ROM support hw/arm/digic: add UART support hw/arm/digic: add timer support hw/arm/digic: prepare DIGIC-based boards support hw/arm: add very initial support for Canon DIGIC SoC target-arm: A64: add support for logical (immediate) insns target-arm: A64: add support for 1-src CLS insn host-utils: add clrsb32/64 - count leading redundant sign bits target-arm: A64: add support for bitfield insns target-arm: A64: add support for 1-src REV insns target-arm: A64: add support for 1-src RBIT insn target-arm: A64: add support for 1-src data processing and CLZ target-arm: A64: add support for 2-src shift reg insns ... Message-id: 1387312160-12318-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-17MAINTAINERS: add myself to maintain allwinner-a10liguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Message-id: 1387159292-10436-7-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add cubieboard supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-6-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/intc: add allwinner A10 interrupt controllerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/timer: add allwinner a10 timerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17vmstate: Add support for an array of ptimer_state *Peter Maydell
Add support for defining a vmstate field which is an array of pointers to structures, and use this to define a VMSTATE_PTIMER_ARRAY() which allows an array of ptimer_state* to be used by devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-2-git-send-email-lig.fnst@cn.fujitsu.com
2013-12-17MAINTAINERS: Document 'Canon DIGIC' machineAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Message-id: 1387188908-754-7-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: add NOR ROM supportAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Message-id: 1387188908-754-6-git-send-email-antonynpavlov@gmail.com [PMM: don't try to load ROM blob if qtest_enabled()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: add UART supportAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-5-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: add timer supportAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-4-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: prepare DIGIC-based boards supportAntony Pavlov
Also this patch adds initial support for Canon PowerShot A1100 IS compact camera. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Message-id: 1387188908-754-3-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add very initial support for Canon DIGIC SoCAntony Pavlov
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders. There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm: A64: add support for logical (immediate) insnsAlexander Graf
This patch adds support for C3.4.4 Logical (immediate), which include AND, ANDS, ORR, EOR. Signed-off-by: Alexander Graf <agraf@suse.de> [claudio: adapted to new decoder, function renaming, removed a TCG temp variable] Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org> [PMM: cleaned up some unnecessary code in logic_imm_decode_wmask and added clarifying commentary on what it's actually doing. Dropped an ext32u that's not needed if we've just done an AND.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 16:54:00 +0000