| Age | Commit message (Collapse) | Author |
|---|
|
The function ich9_d2pbr_init() is completely unused and
thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The function is not used anymore and thus can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The subtle difference between "property not found" and "property not
set" is already confusing enough.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Fix coding style in one instance.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
reported by checkpatch.pl
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
don't mix tab and space. The rule is 4 spaces
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Modify DPRINTF to always enable -Wformat checking.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Cast 64bit variables to int when used in DPRINTF. They only contain
32bit of data.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
- miscellaneous cleanups for TCG (Emilio) and NBD (Bogdan)
- next part in the thread-safe address_space_* saga: atomic access
to the bounce buffer and the map_clients list, from Fam
- optional support for linking with tcmalloc, also from Fam
- reapplying Peter Crosthwaite's "Respect as_translate_internal
length clamp" after fixing the SPARC fallout.
- build system fix from Wei Liu
- small acpi-build and ioport cleanup by myself
# gpg: Signature made Wed Apr 29 09:34:00 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (22 commits)
nbd/trivial: fix type cast for ioctl
translate-all: use bitmap helpers for PageDesc's bitmap
target-i386: disable LINT0 after reset
Makefile.target: prepend $libs_softmmu to $LIBS
milkymist: do not modify libs-softmmu
configure: Add support for tcmalloc
exec: Respect as_translate_internal length clamp
ioport: reserve the whole range of an I/O port in the AddressSpace
ioport: loosen assertions on emulation of 16-bit ports
ioport: remove wrong comment
ide: there is only one data port
gus: clean up MemoryRegionPortio
sb16: remove useless mixer_write_indexw
sun4m: fix slavio sysctrl and led register sizes
acpi-build: remove dependency from ram_addr.h
memory: add memory_region_ram_resize
dma-helpers: Fix race condition of continue_after_map_failure and dma_aio_cancel
exec: Notify cpu_register_map_client caller if the bounce buffer is available
exec: Protect map_client_list with mutex
linux-user, bsd-user: Remove two calls to cpu_exec_init_all
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
# gpg: Signature made Wed Apr 29 00:03:44 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
qtest: Add assertion that required environment variable is set
qtest/ahci: add flush retry test
libqos: add blkdebug_prepare_script
libqtest: add qmp_async
libqtest: add qmp_eventwait
qtest/ahci: Allow override of default CLI options
qtest/ahci: Add simple flush test
qtest/ahci: test different disk sectors
qtest/ahci: add qcow2 support to ahci-test
fdc: remove sparc sun4m mutations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This fixes ioctl behavior on powerpc e6500 platforms with 64bit kernel and 32bit
userspace. The current type cast has no effect there and the value passed to the
kernel is still 0. Probably an issue related to the compiler, since I'm assuming
the same configuration works on a similar setup on x86.
Also ensure consistency with previous type cast in TRACE message.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Message-Id: <1428058914-32050-1-git-send-email-bogdan.purcareata@freescale.com>
Cc: qemu-stable@nongnu.org
[Fix parens as noticed by Michael. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Here we have an open-coded byte-based bitmap implementation.
Get rid of it since there's a ulong-based implementation to be
used by all code.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Due to old Seabios bug, QEMU reenable LINT0 after reset. This bug is long gone
and therefore this hack is no longer needed. Since it violates the
specifications, it is removed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428881529-29459-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I discovered a problem when trying to build QEMU statically with gcc.
libm is an element of LIBS while libpixman-1 is an element in
libs_softmmu. Libpixman references functions in libm, so the original
ordering makes linking fail.
This fix is to reorder $libs_softmmu and $LIBS to make -lm appear after
-lpixman-1. However I'm not quite sure if this is the right fix, hence
the RFC tag.
Normally QEMU is built with c++ compiler which happens to link in libm
(at least this is the case with g++), so building QEMU statically
normally just works and nobody notices this issue.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Message-Id: <1425912873-21215-1-git-send-email-wei.liu2@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is better and prepares for the next patch. When we copy
libs_softmmu's value into LIBS with a := assignment, we cannot
anymore modify libs_softmmu in the Makefiles.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds "--enable-tcmalloc" and "--disable-tcmalloc" to allow linking
to libtcmalloc from gperftools.
tcmalloc is a malloc implementation that works well with threads and is
fast, so it is good for performance.
It is disabled by default, because the MALLOC_PERTURB_ flag we use in
tests doesn't work with tcmalloc. However we can enable tcmalloc
specific heap checker and profilers later.
An IOPS gain can be observed with virtio-blk-dataplane, other parts of
QEMU will directly benefit from it as well:
==========================================================
glibc malloc
----------------------------------------------------------
rw bs iodepth bw iops latency
read 4k 1 150 38511 24
----------------------------------------------------------
==========================================================
tcmalloc
----------------------------------------------------------
rw bs iodepth bw iops latency
read 4k 1 156 39969 23
----------------------------------------------------------
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1427338992-27057-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1427911244-22565-1-git-send-email-emaste@freebsd.org
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-7-git-send-email-jsnow@redhat.com
|
|
Pull this helper out of ide-test and into libqos,
to be shared with ahci-test.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-6-git-send-email-jsnow@redhat.com
|
|
Add qmp_async, which lets us send QMP commands asynchronously.
This is useful when we want to send commands that will trigger
event responses, but we don't know in what order to expect them.
Sometimes the event responses may arrive even before the command
confirmation will show up, so it is convenient to leave the responses
in the stream.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-5-git-send-email-jsnow@redhat.com
|
|
Allow the user to poll until a desired interrupt occurs.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-3-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-2-git-send-email-jsnow@redhat.com
|
|
Test sector offset 0, 1, and the last sector(s)
in LBA28 and LBA48 modes.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
|
|
This will enable the testing of high offsets without
wasting a lot of disk space, and does not impact the
previous tests.
mkimg and mkqcow2 are added to libqos for other tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com
|
|
They were introduced in 6f7e9aec5eb5bdfa57a9e458e391b785c283a007 and
82407d1a4035e5bfefb53ffdcb270872f813b34c and lots of bug fixes were done after that.
This fixes (at least) the detection of the floppy controller on Debian 4.0r9/SPARC,
and SS-5's OBP initialization routine still works.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1426351846-6497-1-git-send-email-hpoussin@reactos.org
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
into staging
VFIO updates
- Correction to BAR overflow
- Fix error sign
- Reset workaround for AMD Bonaire & Hawaii GPUs
# gpg: Signature made Tue Apr 28 18:26:43 2015 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20150428.0:
vfio-pci: Reset workaround for AMD Bonaire and Hawaii GPUs
vfio-pci: Fix error path sign
vfio-pci: Further fix BAR size overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Somehow these GPUs manage not to respond to a PCI bus reset, removing
our primary mechanism for resetting graphics cards. The result is
that these devices typically work well for a single VM boot. If the
VM is rebooted or restarted, the guest driver is not able to init the
card from the dirty state, resulting in a blue screen for Windows
guests.
The workaround is to use a device specific reset. This is not 100%
reliable though since it depends on the incoming state of the device,
but it substantially improves the usability of these devices in a VM.
Credit to Alex Deucher <alexander.deucher@amd.com> for his guidance.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is an impossible error path due to the fact that we're reading a
kernel provided, rather than user provided link, which will certainly
always fit in PATH_MAX. Currently it returns a fixed 26 char path
plus %d group number, which typically maxes out at double digits.
However, the caller of the initfn certainly expects a less-than zero
return value on error, not just a non-zero value. Therefore we
should correct the sign here.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In an analysis by Laszlo, the resulting type of our calculation for
the end of the MSI-X table, and thus the start of memory after the
table, is uint32_t. We're therefore not correctly preventing the
corner case overflow that we intended to fix here where a BAR >=4G
could place the MSI-X table to end exactly at the 4G boundary. The
MSI-X table offset is defined by the hardware spec to 32bits, so we
simply use a cast rather than changing data structure types. This
scenario is purely theoretically, typically the MSI-X table is located
at the front of the BAR.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Block patches
# gpg: Signature made Tue Apr 28 15:35:05 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (76 commits)
block: move I/O request processing to block/io.c
block: extract bdrv_setup_io_funcs()
block: add bdrv_set_dirty()/bdrv_reset_dirty() to block_int.h
block: replace bdrv_states iteration with bdrv_next()
vmdk: Widen before shifting 32 bit header field
block/dmg: make it modular
block/mirror: Always call block_job_sleep_ns()
iotests: add incremental backup granularity tests
iotests: add incremental backup failure recovery test
iotests: add simple incremental backup case
iotests: add QMP event waiting queue
iotests: add invalid input incremental backup tests
hbitmap: truncate tests
block: Resize bitmaps on bdrv_truncate
block: Ensure consistent bitmap function prototypes
block: add BdrvDirtyBitmap documentation
qmp: Add dirty bitmap status field in query-block
qmp: add block-dirty-bitmap-clear
qmp: Add support of "dirty-bitmap" sync mode for drive-backup
block: Add bitmap successors
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The block.c file has grown to over 6000 lines. It is time to split this
file so there are fewer conflicts and the code is easier to maintain.
Extract I/O request processing code:
* Read
* Write
* Zero writes and making the image empty
* Flush
* Discard
* ioctl
* Tracked requests and queuing
* Throttling and copy-on-read
* Block status and allocated functions
* Refreshing block limits
* Reading/writing vmstate
* qemu_blockalign() and friends
The patch simply moves code from block.c into block/io.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Move the code to install coroutine and aio emulation function pointers
in a BlockDriver to its own function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The dirty bitmap functions are called from the block I/O processing
code. Make them visible to block_int.h users so they can be used
outside block.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The bdrv_states list is a static variable in block.c.
bdrv_drain_all() and bdrv_flush_all() use this variable to iterate over
all drives.
The next patch will move bdrv_drain_all() and bdrv_flush_all() out of
block.c so it's necessary to switch to the public bdrv_next() interface.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Coverity spotted this.
The field is 32 bits, but if it's possible to overflow in 32 bit
left shift.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
dmg can optionally utilize libbz2, make it modular
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The mirror block job is trying to take a clever shortcut if delay_ns is
0 and skips block_job_sleep_ns() in that case. But that function must be
called in every block job iteration, because otherwise it is for example
impossible to pause the job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test what happens if you fiddle with the granularity.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-22-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test the failure case for incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-21-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-20-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
A filter is added to allow callers to request very specific
events to be pulled from the event queue, while leaving undesired
events still in the stream.
This allows us to poll for completion data for multiple asynchronous
events in any arbitrary order.
A new timeout context is added to the qmp pull_event method's
wait parameter to allow tests to fail if they do not complete
within some expected period of time.
Also fixed is a bug in qmp.pull_event where we try to retrieve an event
from an empty list if we attempt to retrieve an event with wait=False
but no events have occurred.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-19-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
