aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-03tests/test-replication.c: Add test for for secondary node continuing replicationLukas Straub
This simulates the case that happens when we resume COLO after failover. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03block/replication.c: Ignore requests after failoverLukas Straub
After failover the Secondary side of replication shouldn't change state, because it now functions as our primary disk. In replication_start, replication_do_checkpoint, replication_stop, ignore the request if current state is BLOCK_REPLICATION_DONE (sucessful failover) or BLOCK_REPLICATION_FAILOVER (failover in progres i.e. currently merging active and hidden images into the base image). Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Acked-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03hw: net: cadence_gem: Fix build errors in DB_PRINT()Bin Meng
When CADENCE_GEM_ERR_DEBUG is turned on, there are several compilation errors in DB_PRINT(). Fix them. While we are here, update to use appropriate modifiers in the same DB_PRINT() call. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03NetRxPkt: fix hash calculation of IPV6 TCPYuri Benditovich
When requested to calculate the hash for TCPV6 packet, ignore overrides of source and destination addresses in in extension headers. Use these overrides when new hash type NetPktRssIpV6TcpEx requested. Use this type in e1000e hash calculation for IPv6 TCP, which should take in account overrides of the addresses. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03NetRxPkt: Introduce support for additional hash typesYuri Benditovich
Add support for following hash types: IPV6 TCP with extension headers IPV4 UDP IPV6 UDP IPV6 UDP with extension headers Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03e1000e: Avoid hw_error if legacy mode usedYuri Benditovich
https://bugzilla.redhat.com/show_bug.cgi?id=1787142 The emulation issues hw_error if PSRCTL register is written, for example, with zero value. Such configuration does not present any problem when DTYP bits of RCTL register define legacy format of transfer descriptors. Current commit discards check for BSIZE0 and BSIZE1 when legacy mode used. Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Don't stop reception upon RBE interrupt assertionFinn Thain
Section 3.4.7 of the datasheet explains that, The RBE bit in the Interrupt Status register is set when the SONIC finishes using the second to last receive buffer and reads the last RRA descriptor. Actually, the SONIC is not truly out of resources, but gives the system an early warning of an impending out of resources condition. RBE does not mean actual receive buffer exhaustion, and reception should not be stopped. This is important because Linux will not check and clear the RBE interrupt until it receives another packet. But that won't happen if can_receive returns false. This bug causes the SONIC to become deaf (until reset). Fix this with a new flag to indicate actual receive buffer exhaustion. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Don't reset Silicon Revision registerFinn Thain
The jazzsonic driver in Linux uses the Silicon Revision register value to probe the chip. The driver fails unless the SR register contains 4. Unfortunately, reading this register in QEMU usually returns 0 because the s->regs[] array gets wiped after a software reset. Fixes: bd8f1ebce4 ("net/dp8393x: fix hardware reset") Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Always update RRA pointers and sequence numbersFinn Thain
These operations need to take place regardless of whether or not rx descriptors have been used up (that is, EOL flag was observed). The algorithm is now the same for a packet that was withheld as for a packet that was not. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Clear descriptor in_use field to release packetFinn Thain
When the SONIC receives a packet into the last available descriptor, it retains ownership of that descriptor for as long as necessary. Section 3.4.7 of the datasheet says, When the system appends more descriptors, the SONIC releases ownership of the descriptor after writing 0000h to the RXpkt.in_use field. The packet can now be processed by the host, so raise a PKTRX interrupt, just like the normal case. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Pad frames to word or long word boundaryFinn Thain
The existing code has a bug where the Remaining Buffer Word Count (RBWC) is calculated with a truncating division, which gives the wrong result for odd-sized packets. Section 1.4.1 of the datasheet says, Once the end of the packet has been reached, the serializer will fill out the last word (16-bit mode) or long word (32-bit mode) if the last byte did not end on a word or long word boundary respectively. The fill byte will be 0FFh. Implement buffer padding so that buffer limits are correctly enforced. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Use long-word-aligned RRA pointers in 32-bit modeFinn Thain
Section 3.4.1 of the datasheet says, The alignment of the RRA is confined to either word or long word boundaries, depending upon the data width mode. In 16-bit mode, the RRA must be aligned to a word boundary (A0 is always zero) and in 32-bit mode, the RRA is aligned to a long word boundary (A0 and A1 are always zero). This constraint has been implemented for 16-bit mode; implement it for 32-bit mode too. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Don't clobber packet checksumFinn Thain
A received packet consumes pkt_size bytes in the buffer and the frame checksum that's appended to it consumes another 4 bytes. The Receive Buffer Address register takes the former quantity into account but not the latter. So the next packet written to the buffer overwrites the frame checksum. Fix this. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Implement packet size limit and RBAE interruptFinn Thain
Add a bounds check to prevent a large packet from causing a buffer overflow. This is defensive programming -- I haven't actually tried sending an oversized packet or a jumbo ethernet frame. The SONIC handles packets that are too big for the buffer by raising the RBAE interrupt and dropping them. Linux uses that interrupt to count dropped packets. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Clear RRRA command register bit only when appropriateFinn Thain
It doesn't make sense to clear the command register bit unless the command was actually issued. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Update LLFA and CRDA registers from rx descriptorFinn Thain
Follow the algorithm given in the National Semiconductor DP83932C datasheet in section 3.4.7: At the next reception, the SONIC re-reads the last RXpkt.link field, and updates its CRDA register to point to the next descriptor. The chip is designed to allow the host to provide a new list of descriptors in this way. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Have dp8393x_receive() return the packet sizeFinn Thain
This function re-uses its 'size' argument as a scratch variable. Instead, declare a local 'size' variable for that purpose so that the function result doesn't get messed up. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Clean up endianness hacksFinn Thain
According to the datasheet, section 3.4.4, "in 32-bit mode ... the SONIC always writes long words". Therefore, use the same technique for the 'in_use' field that is used everywhere else, and write the full long word. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03dp8393x: Always use 32-bit accessesFinn Thain
The DP83932 and DP83934 have 32 data lines. The datasheet says, Data Bus: These bidirectional lines are used to transfer data on the system bus. When the SONIC is a bus master, 16-bit data is transferred on D15-D0 and 32-bit data is transferred on D31-D0. When the SONIC is accessed as a slave, register data is driven onto lines D15-D0. D31-D16 are held TRI-STATE if SONIC is in 16-bit mode. If SONIC is in 32-bit mode, they are driven, but invalid. Always use 32-bit accesses both as bus master and bus slave. Force the MSW to zero in bus master mode. This gets the Linux 'jazzsonic' driver working, and avoids the need for prior hacks to make the NetBSD 'sn' driver work. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-02dp8393x: Mask EOL bit from descriptor addressesFinn Thain
The Least Significant bit of a descriptor address register is used as an EOL flag. It has to be masked when the register value is to be used as an actual address for copying memory around. But when the registers are to be updated the EOL bit should not be masked. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-02-28Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200228' into staging target-arm queue: * hw/arm: Use TYPE_PL011 to create serial port * target/arm: Set ID_MMFR4.HPDS for aarch64_max_initfn * hw/arm/integratorcp: Map the audio codec controller * GICv2: Correctly implement the limited number of priority bits * target/arm: refactoring of VFP related feature checks and decode * xilinx_zynq: Fix USB port instantiation * acceptance tests for n800, n810, integratorcp * Implement v8.3-RCPC, v8.4-RCPC, v8.3-CCIDX * arm_gic_kvm: Don't assume kernel can provide a GICv2 (provide better error message for user error) # gpg: Signature made Fri 28 Feb 2020 16:38:04 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200228: (33 commits) hw/intc/arm_gic_kvm: Don't assume kernel can provide a GICv2 target/arm: Implement ARMv8.3-CCIDX target/arm: Implement v8.4-RCPC target/arm: Implement v8.3-RCPC target/arm: Fix wrong use of FIELD_EX32 on ID_AA64DFR0 tests/acceptance/integratorcp: Verify Tux is displayed on framebuffer tests/acceptance: Extract boot_integratorcp() from test_integratorcp() tests/acceptance: Add a test for the integratorcp arm machine tests/acceptance: Add a test for the N800 and N810 arm machines hw/usb/hcd-ehci-sysbus: Remove obsolete xlnx, ps7-usb class hw/arm/xilinx_zynq: Fix USB port instantiation target/arm: Split VMINMAXNM decode target/arm: Split VFM decode target/arm: Add formats for some vfp 2 and 3-register insns target/arm: Remove ARM_FEATURE_VFP* linux-user/arm: Replace ARM_FEATURE_VFP* tests for HWCAP target/arm: Move the vfp decodetree calls next to the base isa target/arm: Move VLLDM and VLSTM to vfp.decode target/arm: Remove ARM_FEATURE_VFP check from disas_vfp_insn target/arm: Replace ARM_FEATURE_VFP4 with isar_feature_aa32_simdfmac ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28hw/intc/arm_gic_kvm: Don't assume kernel can provide a GICv2Peter Maydell
In our KVM GICv2 realize function, we try to cope with old kernels that don't provide the device control API (KVM_CAP_DEVICE_CTRL): we try to use the device control, and if that fails we fall back to assuming that the kernel has the old style KVM_CREATE_IRQCHIP and that it will provide a GICv2. This doesn't cater for the possibility of a kernel and hardware which only provide a GICv3, which is very common now. On that setup we will abort() later on in kvm_arm_pmu_set_irq() when we try to wire up an interrupt to the GIC we failed to create: qemu-system-aarch64: PMU: KVM_SET_DEVICE_ATTR: Invalid argument qemu-system-aarch64: failed to set irq for PMU Aborted If the kernel advertises KVM_CAP_DEVICE_CTRL we should trust it if it says it can't create a GICv2, rather than assuming it has one. We can then produce a more helpful error message including a hint about the most probable reason for the failure. If the kernel doesn't advertise KVM_CAP_DEVICE_CTRL then it is truly ancient by this point but we might as well still fall back to a KVM_CREATE_IRQCHIP GICv2. With this patch then the user misconfiguration which previously caused an abort now prints: qemu-system-aarch64: Initialization of device kvm-arm-gic failed: error creating in-kernel VGIC: No such device Perhaps the host CPU does not support GICv2? Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Message-id: 20200225182435.1131-1-peter.maydell@linaro.org
2020-02-28target/arm: Implement ARMv8.3-CCIDXPeter Maydell
The ARMv8.3-CCIDX extension makes the CCSIDR_EL1 system ID registers have a format that uses the full 64 bit width of the register, and adds a new CCSIDR2 register so AArch32 can get at the high 32 bits. QEMU doesn't implement caches, so we just treat these ID registers as opaque values that are set to the correct constant values for each CPU. The only thing we need to do is allow 64-bit values in our cssidr[] array and provide the CCSIDR2 accessors. We don't set the CCIDX field in our 'max' CPU because the CCSIDR constant values we use are the same as the ones used by the Cortex-A57 and they are in the old 32-bit format. This means that the extra regdef added here is unused currently, but it means that whenever in the future we add a CPU that does need the new 64-bit format it will just work when we set the cssidr values and the ID registers for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224182626.29252-1-peter.maydell@linaro.org
2020-02-28target/arm: Implement v8.4-RCPCPeter Maydell
The v8.4-RCPC extension implements some new instructions: * LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW * STLUR, STLURB, STLURH These are all in a new subgroup of encodings that sits below the top-level "Loads and Stores" group in the Arm ARM. The STLUR* instructions have standard store-release semantics; the LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose to implement them as the slightly stronger Load-Acquire. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
2020-02-28target/arm: Implement v8.3-RCPCPeter Maydell
The v8.3-RCPC extension implements three new load instructions which provide slightly weaker consistency guarantees than the existing load-acquire operations. For QEMU we choose to simply implement them with a full LDAQ barrier. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
2020-02-28target/arm: Fix wrong use of FIELD_EX32 on ID_AA64DFR0Peter Maydell
We missed an instance of using FIELD_EX32 on a 64-bit ID register, in isar_feature_aa64_pmu_8_4(). Fix it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224172846.13053-2-peter.maydell@linaro.org
2020-02-28tests/acceptance/integratorcp: Verify Tux is displayed on framebufferPhilippe Mathieu-Daudé
Add a test that verifies the Tux logo is displayed on the framebuffer. We simply follow the OpenCV "Template Matching with Multiple Objects" tutorial, replacing Lionel Messi by Tux: https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html When OpenCV and NumPy are installed, this test can be run using: $ AVOCADO_ALLOW_UNTRUSTED_CODE=hmmm \ avocado --show=app,framebuffer run -t device:framebuffer \ tests/acceptance/machine_arm_integratorcp.py JOB ID : 8c46b0f8269242e87d738247883ea2a470df949e JOB LOG : avocado/job-results/job-2020-01-31T21.38-8c46b0f/job.log (1/1) tests/acceptance/machine_arm_integratorcp.py:IntegratorMachine.test_framebuffer_tux_logo: framebuffer: found Tux at position [x, y] = (0, 0) PASS (3.96 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 4.23 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20200225172501.29609-5-philmd@redhat.com Message-Id: <20200131211102.29612-3-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28tests/acceptance: Extract boot_integratorcp() from test_integratorcp()Philippe Mathieu-Daudé
As we want to re-use this code, extract it as a new function. Since we are using the PL011 serial console, add a Avocado tag to ease filtering of tests. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28tests/acceptance: Add a test for the integratorcp arm machineThomas Huth
There is a kernel and initrd available on github which we can use for testing this machine. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-3-philmd@redhat.com Message-Id: <20200131170233.14584-1-thuth@redhat.com> [PMD: Renamed test method, moved description from class to method] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28tests/acceptance: Add a test for the N800 and N810 arm machinesThomas Huth
Old kernels from the Meego project can be used to check that Linux is at least starting on these machines. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200225172501.29609-2-philmd@redhat.com Message-Id: <20200129131920.22302-1-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28hw/usb/hcd-ehci-sysbus: Remove obsolete xlnx, ps7-usb classGuenter Roeck
Xilinx USB devices are now instantiated through TYPE_CHIPIDEA, and xlnx support in the EHCI code is no longer needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200215122354.13706-3-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28hw/arm/xilinx_zynq: Fix USB port instantiationGuenter Roeck
USB ports on Xilinx Zync must be instantiated as TYPE_CHIPIDEA to work. Linux expects and checks various chipidea registers, which do not exist with the basic ehci emulation. This patch series fixes the problem. Without this patch, USB ports fail to instantiate under Linux. ci_hdrc ci_hdrc.0: doesn't support host ci_hdrc ci_hdrc.0: no supported roles With this patch, USB ports are instantiated, and it is possible to boot from USB drive. ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 usb 1-1: new full-speed USB device number 2 using ci_hdrc usb 1-1: not running at top speed; connect to a high speed hub usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64 usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 512, setting to 64 usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200215122354.13706-2-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Split VMINMAXNM decodeRichard Henderson
Passing the raw op field from the manual is less instructive than it might be. Do the full decode and use the existing helpers to perform the expansion. Since these are v8 insns, VECLEN+VECSTRIDE are already RES0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Split VFM decodeRichard Henderson
Passing the raw o1 and o2 fields from the manual is less instructive than it might be. Do the full decode and let the trans_* functions pass in booleans to a helper. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Add formats for some vfp 2 and 3-register insnsRichard Henderson
Those vfp instructions without extra opcode fields can share a common @format for brevity. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Remove ARM_FEATURE_VFP*Richard Henderson
We have converted all tests against these features to ISAR tests. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28linux-user/arm: Replace ARM_FEATURE_VFP* tests for HWCAPRichard Henderson
Use isar feature tests instead of feature bit tests. Although none of QEMUs current cpus have VFPv3 without D32, replace the large comment explaining why with one line that sets ARM_HWCAP_ARM_VFPv3D16 under the correct conditions. Mirror the test sequence used in the linux kernel. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Move the vfp decodetree calls next to the base isaRichard Henderson
Have the calls adjacent as an intermediate step toward actually merging the decodes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Move VLLDM and VLSTM to vfp.decodeRichard Henderson
Now that we no longer have an early check for ARM_FEATURE_VFP, we can use the proper ISA check in trans_VLLDM_VLSTM. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Remove ARM_FEATURE_VFP check from disas_vfp_insnRichard Henderson
We now have proper ISA checks within each trans_* function. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Replace ARM_FEATURE_VFP4 with isar_feature_aa32_simdfmacRichard Henderson
All remaining tests for VFP4 are for fused multiply-add insns. Since the MVFR1 field is used for both VFP and NEON, move its adjustment from the !has_neon block to the (!has_vfp && !has_neon) block. Test for vfp of the appropraite width alongside the test for simdfmac within translate-vfp.inc.c. Within disas_neon_data_insn, we have already tested for ARM_FEATURE_NEON. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Add missing checks for fpsp_v2Richard Henderson
We will eventually remove the early ARM_FEATURE_VFP test, so add a proper test for each trans_* that does not already have another ISA test. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Replace ARM_FEATURE_VFP3 checks with fp{sp, dp}_v3Richard Henderson
Sort this check to the start of a trans_* function. Merge this with any existing test for fpdp_v2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Perform fpdp_v2 check firstRichard Henderson
Shuffle the order of the checks so that we test the ISA before we test anything else, such as the register arguments. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Add isar_feature_aa64_fp_simd, isar_feature_aa32_vfpRichard Henderson
We cannot easily create "any" functions for these, because the ID_AA64PFR0 fields for FP and SIMD signal "enabled" with zero. Which means that an aarch32-only cpu will return incorrect results when testing the aarch64 registers. To use these, we must either have context or additionally test vs ARM_FEATURE_AARCH64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Add isar_feature_aa32_{fpsp_v2, fpsp_v3, fpdp_v3}Richard Henderson
We will shortly use these to test for VFPv2 and VFPv3 in different situations. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Rename isar_feature_aa32_fpdp_v2Richard Henderson
The old name, isar_feature_aa32_fpdp, does not reflect that the test includes VFPv2. We will introduce another feature tests for VFPv3. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200224222232.13807-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28target/arm: Add isar_feature_aa32_vfp_simdRichard Henderson
Use this in the places that were checking ARM_FEATURE_VFP, and are obviously testing for the existance of the register set as opposed to testing for some particular instruction extension. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28cpu/arm11mpcore: Set number of GIC priority bits to 4Sai Pavan Boddu
The GIC built into the ARM11MPCore is always implemented with 4 priority bits; set the GIC property accordingly. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1582537164-764-4-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28cpu/a9mpcore: Set number of GIC priority bits to 5Sai Pavan Boddu
All A9 CPUs have a GIC with 5 bits of priority. Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1582537164-764-3-git-send-email-sai.pavan.boddu@xilinx.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-03 21:47:57 +0000