aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-31qemu-queue: Introduce QLIST_INSERT_HEAD_RCU and dummy RCU wrappers.Harsh Prateek Bora
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not re-ordered and therefore avoiding a crash. There may be parallel readers which should be allowed for lock-free access and this variant allows us to get rid of rwlocks used by readers. SynthFS is a special case where we dont really need full RCU capabilities as it doesnt allow list entry deletion but concurrent readers/writers and instruction re-ordering should not result in a crash. Also, once the real rcu is available, dummy rcu macro definitions will go away and the code will still work as expected. This patchwork is based on inputs from Paolo Bonzini. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31hw/9pfs: Add synthetic file system support using 9pAneesh Kumar K.V
This patch create a synthetic file system with mount tag v_synth when -virtfs_synth command line option is specified in qemu. The synthetic file system can be mounted in guest using 9p using the below command line mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint> Synthetic file system enabled different qemu subsystem to register callbacks for read and write events from guest. The subsystem can create directories and files in the synthetic file system as show in ex below qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node); qemu_v9fs_synth_add_file(node, 0777, "testfile", my_test_read, NULL, NULL); Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31hw/9pfs: Abstract open state of fid to V9fsFidOpenStateAneesh Kumar K.V
To implement synthetic file system in Qemu we may not really require file descriptor and Dir *. Make generic code use V9fsFidOpenState instead. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31hw/9pfs: Read-only support for 9p exportM. Mohan Kumar
A new fsdev parameter "readonly" is introduced to control accessing 9p export. "readonly" can be used to specify the access type. By default "rw" access is given to 9p export. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31qemu: Add opt_set_bool functionalityM. Mohan Kumar
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31configure: Update configure so that open_by_handle_at check returns correct ↵Aneesh Kumar K.V
value According to David Gibson for some compiler/libc combinations, open_by_handle_at test in configure isn't quite right: because the file_handle pointer is never dereferenced, gcc doesn't complain even if it is undefined. Change the test as suggested by him. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-31hw/9pfs: Fix error handling in local_mknodAneesh Kumar K.V
Update local_chown to remove unnecessary if loop Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-30MAINTAINERS: update wiki URL and machine names for target-xtensaMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30tcg: Optimize some forms of deposit.Richard Henderson
If the deposit replaces the entire word, optimize to a move. If we're inserting to the top of the word, avoid the mask of arg2 as we'll be shifting out all of the garbage and shifting in zeros. If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit when possible. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30hw/9pfs: Make VirtFS tracing work correctlyAneesh Kumar K.V
this patch fix multiple issues with VirtFS tracing. a) Add tracepoint to the correct code path. We handle error in complete_pdu b) Fix indentation in python script c) Fix variable naming issue in python script Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30exec-all: Fix void pointer arithmeticStefan Weil
Adding an offset to a void pointer works with gcc but is not allowed by the current C standards. With -pedantic, gcc complains: exec-all.h:344: error: pointer of type ‘void *’ used in arithmetic Fix this, and also replace (unsigned long) by (uintptr_t) in the same statement. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-30Add linux-headers/asm to .gitignoreDavid Gibson
linux-headers/asm is a symlink generated during configure. It should not, therefore be committed to git, nor show up in git diffs and the like. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-27Merge branch 'rth/vis2' of git://repo.or.cz/qemu/rthBlue Swirl
* 'rth/vis2' of git://repo.or.cz/qemu/rth: target-sparc: Implement FALIGNDATA inline. target-sparc: Implement BMASK/BSHUFFLE. target-sparc: Implement ALIGNADDR* inline. target-sparc: Implement EDGE* instructions. target-sparc: Implement fpack{16,32,fix}. target-sparc: Implement PDIST. target-sparc: Do exceptions management fully inside the helpers. target-sparc: Change fpr representation to doubles. target-sparc: Undo cpu_fpr rename. target-sparc: Extract float128 move to a function. target-sparc: Extract common code for floating-point operations. target-sparc: Make FPU/VIS helpers const when possible. target-sparc: Pass float64 parameters instead of dt0/1 temporaries. target-sparc: Add accessors for double-precision fpr access. target-sparc: Mark fprs dirty in store accessor. target-sparc: Add accessors for single-precision fpr access.
2011-10-27Merge branch 'target-arm.for-upstream' of ↵Andrzej Zaborowski
git://git.linaro.org/people/pmaydell/qemu-arm
2011-10-26target-sparc: Implement FALIGNDATA inline.Richard Henderson
This is a relatively simple sequence of shifts. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement BMASK/BSHUFFLE.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement ALIGNADDR* inline.Richard Henderson
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not implemeneted at all. However, this is a very simple operation so we're better off doing this inline. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement EDGE* instructions.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement fpack{16,32,fix}.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Implement PDIST.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Do exceptions management fully inside the helpers.Richard Henderson
This reduces the size of the individual translation blocks, since we only emit a single call for each FOP rather than three. In addition, clear_float_exceptions expands inline to a single byte store. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Change fpr representation to doubles.Richard Henderson
This allows a more efficient representation for 64-bit hosts. It should be about the same for 32-bit hosts, as we can still access the individual pieces of the double. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Undo cpu_fpr rename.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Extract float128 move to a function.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Extract common code for floating-point operations.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Make FPU/VIS helpers const when possible.Richard Henderson
This also removes the unused ENV parameter from these helpers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Pass float64 parameters instead of dt0/1 temporaries.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Add accessors for double-precision fpr access.Richard Henderson
Begin using i64 quantities to manipulate double-precision values. On a 64-bit host this will, for the moment, generate less efficient code; on a 32-bit host code quality should be largely unchanged. Code quality for 64-bit will be adjusted with a subsequent patch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Mark fprs dirty in store accessor.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26target-sparc: Add accessors for single-precision fpr access.Richard Henderson
Load, store, and "create destination". This version attempts to change the behaviour of the translator as little as possible. We previously used cpu_tmp32 as the temporary destination, and we continue to use that. This will eventually allow a change in representation of the fprs. Change the name of the cpu_fpr array to make certain that all instances are converted. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26Sparc: split load and store op helpersBlue Swirl
Move load and store op helpers top ldst_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert win_helper to trace frameworkBlue Swirl
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert interrupt helpers to trace frameworkBlue Swirl
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: convert mmu_helper to trace frameworkBlue Swirl
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: split MMU helpersBlue Swirl
Move MMU helpers to mmu_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: fix coding style in helper.cBlue Swirl
Before the next patch, fix coding style of the areas affected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for division op helpersBlue Swirl
Make [su]div{,cc} helpers take a parameter for CPUState instead of relying on global env. Move the functions to helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for softint op helpers and Leon cache controlBlue Swirl
Make softint op helpers and Leon cache irq manager take a parameter for CPUState instead of relying on global env. Move the functions to int{32,64}_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Sparc: avoid AREG0 for CWP and PSTATE helpersBlue Swirl
Make CWP and PSTATE helpers take a parameter for CPUState instead of relying on global env. Remove wrapper functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-10-25main-loop: Add missing include fileStefan Weil
stdint.h defines the POSIX data types and is needed for MinGW-w64 (and maybe other hosts). v2: Instead of adding stdint.h directly, qemu-common.h is now included and duplicate include statements were removed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-25target-sparc: Fix use of g_new0 / g_freeStefan Weil
g_malloc0 needs g_free instead of free. While fixing this, I also replaced g_malloc0 by g_new0 as was suggested by Stuart Brady. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25target-sparc: Fix order of function parametersStefan Weil
The MinGW-w64 gcc complains about wrong parameters for gen_helper_fpadd16_s and three other functions. gen_helper_fpadd16_s is declared like this (hidden in lots of macros): static inline void gen_helper_fpadd16s(TCGv_i32 retval, TCGv_ptr arg1, TCGv_i32 arg2, TCGv_i32 arg3); So it looks like cpu_env should be the 2nd parameter. Please review this patch as I have no environment to test it (maybe the 1st parameter should be cpu_dst?). Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-25hda: do not mix output and input stream states, RHBZ #740493Marc-André Lureau
Windows 7 may use the same stream number for input and output. Current code will confuse streams. Changes since v1: - keep running_compat[] for migration version 1 - add running_real[] for migration version 2 Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-10-25hda: do not mix output and input streams, RHBZ #740493Marc-André Lureau
Windows 7 may use the same stream number for input and output. That will result in lot of garbage on playback. The hardcoded value of 4 needs to be in sync with GCAP streams description and IN/OUT registers. Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com> Signed-off-by: malc <av1474@comtv.ru>
2011-10-24Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into stagingAnthony Liguori
2011-10-23Add stdio char device on windowsFabien Chouteau
Simple implementation of an stdio char device on Windows. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: split CWP and PSTATE op helpersBlue Swirl
Move CWP and PSTATE op helpers to win_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: avoid AREG0 for lazy condition code helpersBlue Swirl
Make lazy condition code helpers take a parameter for CPUState instead of relying on global env. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-23Sparc: split lazy condition code handling op helpersBlue Swirl
Move lazy condition code handling op helpers to cc_helper.c. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-23 15:53:28 +0000