aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-07usb: claim port at device initialization time.Gerd Hoffmann
This patch makes qemu assign a port when creating the device, not when attaching it. For most usb devices this isn't a noticable difference because they are in attached state all the time. The change affects usb-host devices which live in detached state while the real device is unplugged from the host. They have a fixed port assigned all the time now instead of getting grabbing one on attach and releasing it at detach, i.e. they stop floating around at the usb bus. The change also allows to simplify usb-hub. It doesn't need the handle_attach() callback any more to configure the downstream ports. This can be done at device initialitation time now. The changed initialization order (first grab upstream port, then register downstream ports) also fixes some icky corner cases. For example it is not possible any more to plug the hub into one of its own downstream ports. The usb host adapters must care too. USBPort->dev being non-NULL doesn't imply any more the device is in attached state. The host adapters must additionally check the USBPort->dev->attached flag. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-ccid: remote wakeup supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-ccid: switch to USBDesc*Gerd Hoffmann
Switch the smard card emulation to use the USBDesc* structs for the usb descriptors. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb: fix use after freeGerd Hoffmann
The ->complete() callback might have released the USBPacket (uhci actually does), so we must not touch it after the callback returns. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: parse port in /proc/bus/usb/devices scanGerd Hoffmann
Unfortunaly this is limited to root ports. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: constify portGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-ehci: handle siTDsGerd Hoffmann
This patch adds code to do minimal siTD handling, which is basically just following the next pointer. This is good enougth to handle the inactive siTDs used by FreeBSD. Active siTDs are skipped too as we don't have split transfer support in qemu, additionally a warning is printed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: endpoint table fixupGerd Hoffmann
USB Devices can have up to 15 IN and 15 OUT endpoints, not 15 endpoints total. Move from one array to two arrays (one IN, one OUT) to maintain the endpoint state.
2011-09-07usb-host: claim portGerd Hoffmann
When configured to pass through a specific host port (using hostbus and hostport properties), try to claim the port if supported by the kernel. That will avoid any kernel drivers binding to devices plugged into that port. It will not stop any userspace apps (such as usb_modeswitch) access the device via usbfs though. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: fix configuration tracking.Gerd Hoffmann
It is perfectly fine to leave the usb device in unconfigured state (USBHostDevice->configuration == 0). Just do that and wait for the guest to explicitly set a configuration. This is closer to what real hardware does and it also simplifies the device initialization. There is no need to figure how the device is configured on the host. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: limit open retriesGerd Hoffmann
Limit the number of times qemu tries to open host devices to three. Reset error counter when the device goes away, after un-plugging and re-plugging the device qemu will try again three times. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: fix halted endpointsGerd Hoffmann
Two fixes for the price of one ;) First, reinitialize the endpoint table after device reset. This is needed anyway as the reset might have switched interfaces. It also clears the endpoint halted state. Second the CLEAR_HALT ioctl wants a unsigned int passed in as argument, not uint8_t. This gets my usb sd card reader (sandisk micromate) going. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-07usb-host: reapurb error report fixGerd Hoffmann
Don't report errors on devices which are in disconnected and closing state.
2011-09-07usb-host: start tracing supportGerd Hoffmann
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in favor of the trace points. Also cleanup error reporting a bit while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-09-06mips: Support the MT TCStatus IXMT irq disable flagEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Add SMP support to the Malta boardEdgar E. Iglesias
No change to the CPU kinds, so SMP will only work if manually changing the cpu to 34Kf: -cpu 34Kf -smp 2 Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Add MT halting and waking of VPEsEdgar E. Iglesias
+ some partial support for TC's. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Initialize MT state at resetEdgar E. Iglesias
Only TC0 on VPE0 is active after reset. All other VPEs and TCs start in sleep. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Default to using one VPE and one TC.Edgar E. Iglesias
Boards can override the setup if needed. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Enable VInt interrupt mode for the 34KfEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Correct VInt vector generationEdgar E. Iglesias
1. The pending need to pass the Status IM gating. 2. The priority is from seven (highest prio) down to zero. QEMU was doing the opposite. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Correct IntCtl write mask for VIntEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Hook in more reg accesses via mttr/mftrEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Synchronize CP0 TCSTatus, Status and EntryHiEdgar E. Iglesias
These registers share some of their fields. Writes to these fields should be visible through the corresponding mirror fields. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Handle TC indexing of other VPEsEdgar E. Iglesias
Introduce mips_cpu_map_tc() to map a global TC index into a VPE nr and local tc index. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-04apb_pci: convert PCI space to memory APIBlue Swirl
Add a new memory space for PCI instead of using system memory. This also fixes a bug where VGA region vga.chain4 is accidentally mapped to 0xa0000 instead of 0x1ff000a0000. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-04fw_cfg: fix crash if FW_CFG_WRITE_CHANNEL is used incorrectlyBlue Swirl
Avoid a crash if the guest combines FW_CFG_WRITE_CHANNEL with a wrong value. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03softfloat: Use uint32 consistentlyAndreas Färber
Prepares for uint32 replacement. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03softfloat: Use uint16 consistentlyAndreas Färber
Prepares for uint16 replacement. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Allow overriding the location of Samba's smbd.Brad
Allow overriding the location of Samba's smbd. Pretty much every OS I look at has some means of changing this path (patching) so lets just make it easier for OS developers creating packages and/or end users to override the location. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Add new macro QEMU_PACKED for packed C structuresStefan Weil
A packed struct needs different gcc attributes for compilations with MinGW compilers because glib-2.0 adds compiler flag -mms-bitfields which modifies the packing algorithm. Attribute gcc_struct reverses the negative effects of -mms-bitfields. QEMU_PACKED sets this attribute and must be used for any packed struct which is affected by -mms-bitfields. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-02rename qemu_malloc and related to glib names for coherenceFrediano Ziglio
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Fix install(1) usage to be compatible with OpenBSD's install(1).Brad
Fix install(1) usage to be compatible with OpenBSD's install(1). When creating a directory via the -d flag the -p flag cannot be used at the same time. Also in the context of installing QEMU it doesn't make sense to use the -p flag anyway so use the [default] -c flag instead. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Rename qemu -> qemu-system-i386Anthony Liguori
This has been discussed before in the past. The special casing really makes no sense anymore. This seems like a good change to make for 1.0. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02main: force enabling of I/O threadAnthony Liguori
Enabling the I/O thread by default seems like an important part of declaring 1.0. Besides allowing true SMP support with KVM, the I/O thread means that the TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which currently requires a (racey) signal based alarm system. I know there have been concerns about performance. I think so far the ones that have come up (virtio-net) are most likely due to secondary reasons like decreased batching. I think we ought to force enabling I/O thread early in 1.0 development and commit to resolving any lingering issues. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02trace: fix out-of-tree buildsAnthony Liguori
Reported-by: Lluis Vilanova <vilanova@ac.upc.edu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
2011-09-01Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-09-01Merge remote-tracking branch 'qemu-kvm-tmp/memory/core' into stagingAnthony Liguori
2011-09-01build: sort objects to remove duplicates for linkStefan Hajnoczi
Avoid duplicate object files during the link. There are legitimate cases where a link command-line would include duplicate object files because two independent subsystems both depend on common infrastructure. Use GNU make's $(sort) function to remove duplicate object files from the link command-line. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01main: switch qemu_set_fd_handler to g_io_add_watchAnthony Liguori
This patch changes qemu_set_fd_handler to be implemented in terms of g_io_add_watch(). The semantics are a bit different so some glue is required. qemu_set_fd_handler2 is much harder to convert because of its use of polling. The glib main loop has the major of advantage of having a proven thread safe architecture. By using the glib main loop instead of our own, it will allow us to eventually introduce multiple I/O threads. I'm pretty sure that this will work on Win32, but I would appreciate some help testing. I think the semantics of g_io_channel_unix_new() are really just tied to the notion of a "unix fd" and not necessarily unix itself. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01Add glib support to main loopAnthony Liguori
This allows GSources to be used to register callback events in QEMU. This is useful as it allows us to take greater advantage of glib and also because it allows us to write code that is more easily testable outside of QEMU since we can make use of glib's main loop in unit tests. All new code should use glib's callback mechanisms for registering fd events which are very well documented at: http://developer.gnome.org/glib/stable/glib-The-Main-Event-Loop.html And: http://developer.gnome.org/gio/stable/ Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01tcg/ppc/tcg-target.c: Avoid 'set but not used' gcc warningsPeter Maydell
Move the declaration and initialisation of some variables in tcg_out_qemu_ld and tcg_out_qemu_st inside CONFIG_SOFTMMU, to avoid the "variable set but not used" warning of gcc 4.6. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: malc <av1474@comtv.ru>
2011-09-01simpletrace: fix process() argument countStefan Hajnoczi
The simpletrace.process() function invokes analyzer methods with the wrong number of arguments if a timestamp should be included. This patch fixes the issue so that trace analysis scripts can make use of timestamps. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01trace: enable all eventsLluís
Given that all events with programmatically-controlled state are disabled by default, we can delete the "disable" property from all events. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [stderr] add support for dynamically enabling/disabling eventsLluís
Uses the generic interface provided in "trace/control.h" in order to provide a programmatic interface as well as command line and monitor controls. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [simple] disable all trace points by defaultLluís
Note that this refers to the backend-specific state (whether the output must be generated), not the event "disabled" property (which always uses the "nop" backend). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: always use the "nop" backend on events with the "disable" keywordLluís
Any event with the keyword/property "disable" generates an empty trace event using the "nop" backend, regardless of the current backend. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: add "-trace events" argument to control initial stateLluís
The "-trace events" argument can be used to provide a file with a list of trace event names that will be enabled prior to starting execution, thus providing early tracing. This saves the user from manually toggling event states through the monitor interface or whichever backend-specific interface. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-23 03:10:29 +0000