aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-16error: Don't abuse qemu_error() for non-error in scsi_hot_add()Markus Armbruster
Commit 30d335d6 converted an informational message from monitor_printf() to qemu_error(), probably because the latter doesn't need a mon argument. A later commit will make qemu_error() print additional stuff that is only appropriate for proper errors, and then this will break. Clean it up.
2010-03-16error: Don't abuse qemu_error() for non-error in qbus_find()Markus Armbruster
qbus_find() adds an informational line to error messages, and prints both lines with one qemu_error(). Use error_printf() for the informational line instead. While there, simplify: instead of printing buffers filled by qbus_list_bus() and qbus_list_dev() in one go, make them print it.
2010-03-16error: Don't abuse qemu_error() for non-error in qdev_device_help()Markus Armbruster
qdev_device_help() prints device information with qemu_error(). A later commit will make qemu_error() print additional stuff that is only appropriate for proper errors, and then this will break. Use error_printf() instead. While there, simplify: instead of printing a buffer filled by qdev_print_devinfo() in one go, make qdev_print_devinfo() print it.
2010-03-16error: New error_printf() and error_vprintf()Markus Armbruster
2010-03-16error: Move qemu_error & friends into their own headerMarkus Armbruster
2010-03-16error: Simplify error sink setupMarkus Armbruster
qemu_error_sink can either point to a monitor or a file. In practice, it always points to the current monitor if we have one, else to stderr. Simply route errors to the current monitor or else to stderr, and remove qemu_error_sink along with the functions to control it. Actually, the old code switches the sink slightly later, in handle_user_command() and handle_qmp_command(), than it gets switched now, implicitly, by setting the current monitor in monitor_read() and monitor_control_read(). Likewise, it switches back slightly earlier (same places). Doesn't make a difference, because there are no calls of qemu_error() in between.
2010-03-16error: Move qemu_error() & friends from monitor.c to own fileMarkus Armbruster
They're about reporting errors, not about the monitor.
2010-03-16monitor: Factor monitor_set_error() out of qemu_error_internal()Markus Armbruster
This separates the monitor part from the QError part.
2010-03-16block: Simplify usb_msd_initfn() test for "can read bdrv key"Markus Armbruster
The old test assumes that "hotplugged" implies "we have a current monitor for reading the key". This is in fact true, but it's not obviously true. Aside: if it were false, we could pass a null pointer to monitor_read_bdrv_key_start(), which would then crash. The previous commit permits us to check for "we have a current monitor" directly, so do that.
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-03-16tools: Remove unused cur_mon from qemu-tool.cMarkus Armbruster
2010-03-16pc: Factor common code out of pc_boot_set() and cmos_init()Markus Armbruster
Code duplicated in commit 0ecdffbb. The two versions are similar, but not identical: * cmos_init() reports errors to stderr, pc_boot_set() via qemu_error(). The latter is fine for both, so pick that for the common code. * cmos_init() obeys fd_bootchk, pc_boot_set() ignores it. Make it a parameter of the common code.
2010-03-16pc: Fix error reporting for -boot onceMarkus Armbruster
Commit 0ecdffbb created pc_boot_set() for use from monitor command "boot_set", via qemu_boot_set(). pc_boot_set() reports errors to cur_mon, which works fine for monitor code. Commit e0f084bf reused the function int reset handler restore_boot_devices(). Use of cur_mon is problematic in that context. For instance, the "Too many boot devices for PC" error for "-boot order=abcdefgh,once=c" goes to the monitor instead of stderr. The monitor may not even exist. Fix by switching to qemu_error().
2010-03-16savevm: Fix -loadvm to report errors to stderr, not the monitorMarkus Armbruster
A monitor may not even exist. Change load_vmstate() to use qemu_error() instead of monitor_printf(). Parameter mon is now unused, remove it.
2010-03-16usb: Remove disabled monitor_printf() in usb_read_file()Markus Armbruster
The monitor_printf() reports failure. Printing is wrong, because the caller tries various arguments, and expects the function to fail for some or all. Disabled since commit 26a9e82a. Remove it.
2010-03-11target-ppc: fix evsrwu and evsrws (second try)Aurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-11target-ppc: fix evsrwu and evsrwsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-11target-ppc: fix evslw instructionAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-11audio: fix commentmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-03-10QMP: Really move the RESET event to qemu_system_reset()Luiz Capitulino
Something bad has happened in the merge of commit 0ee44250, as the log message says it's supposed to be in qemu_system_reset() but it is do_vm_stop(). Possibly, it was a problem with the conflict resolution with ea375f9a (which has been merged first). This commit moves (again) the RESET event into qemu_system_reset(). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-10target-i386: fix SIB decoding with index = 4Aurelien Jarno
A SIB byte with an index of 4 means "no scaled index", even if the scale value is not 0. In 64-bit mode, if REX.X is used, an index of 4 selects %r12. This is correctly handled by the computation of the index variable, which includes the index bits, and also the REX.X prefix: index = ((code >> 3) & 7) | REX_X(s); Thanks to Avi Kivity, Jamie Lokier and Malc for the analysis of the problem and the initial patch. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-09documentation: qemu_write_full don't work with non-blocking fd'sJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09block: print errno on errorJuan Quintela
Now that we changed all create calls to return errno, just print it. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09vmdk: share cleanup codeJuan Quintela
cleanup code is identical for error/success cases. Only difference are goto labels. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09vmdk: fix double freeJuan Quintela
fail_gd error case would also free rgd_buf that was already freed Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09vmdk: make vmdk_snapshot_create return -errnoJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09vmdk: return errno instead of -1Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09qcow: return errno instead of -1Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09qcow2: return errno instead of -1Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09slirp: check system() successJuan Quintela
we shouldn't call W*() macros until we check that fork worked. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09cow: return errno instead of -1Juan Quintela
Remove not needed ret = 0 assignment. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09qemu-img rebase: Add -f optionKevin Wolf
Allow the user to specify the format of the image to rebase. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09configure: Fix code which creates config.mak filesStefan Weil
These files are created by configure and grow unnecessarily at each new call of configure: roms/seabios/config.mak roms/vgabios/config.mak libhw32/config.mak libhw64/config.mak libhw32/config.mak and libhw64/config.mak set compiler options, and the wrong old code results in very long command lines. The new code always writes a new config.mak instead of appending to an existing one. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09configure: Fix wrong stderr redirectionStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09QMP: Introduce WATCHDOG eventLuiz Capitulino
It's emitted whenever the watchdog device's timer expires. The action taken is provided in the 'data' member. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09Restore terminal attributes for tty based monitorShahar Havivi
Patch http://permalink.gmane.org/gmane.comp.emulators.qemu/63472 handle close when using tty devices (like /dev/ttyS0), yet tty based monitor are not restoring terminal attributes (as done with stdio based monitor), when closing qemu after that command: $ qemu -monitor /dev/tty the terminal is not responding until you write reset (blindly), this patch fix it Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09kbd keds: vncGerd Hoffmann
Use led status notification support in vnc. The qemu vnc server keeps track of the capslock and numlock states based on the key presses it receives from the vnc client. But this fails in case the guests idea of the capslock and numlock state changes for other reasons. One case is guest reboot (+ keyboard reset). Another case are more recent windows versions which reset capslock state before presenting the login screen. Usually guests use the keyboard leds to signal the capslock and numlock state to the user, so we can use this to better keep track of capslock and numlock state in the qemu vnc server. Also toggle the numlock and capslock states on keydown events (instead of keyup). Guests do the same. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09kbd leds: usb kbdGerd Hoffmann
Add led status notification support to the usb kbd driver. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09kbd leds: ps/2 kbdGerd Hoffmann
Add led status notification support to the ps/2 kbd driver. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09kbd leds: infrastructureGerd Hoffmann
Adds infrastructure for keyboard led status tracking to qemu. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09scsi: Make device scsi-disk reject /dev/sg*Markus Armbruster
You're supposed to use scsi-generic for that. Which rejects anything but /dev/sg*. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09qdev: Catch attempt to attach more than one device to a netdevMarkus Armbruster
Guest device and host netdev are peers, i.e. it's a 1:1 relation. However, we fail to enforce that: $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio QEMU 0.12.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0 virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0 It's all downhill from there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09qdev: Improve diagnostics for bad property valuesMarkus Armbruster
Property "vlan" reports "failed to parse" even when the value parses just fine, but the result doesn't name an existing VLAN. Similarly, properties "drive", "chr" and "netdev" misleadingly report "failed to parse" when the value doesn't name an existing host device. Change PropertyInfo method parse to return an error code, so that qdev_prop_parse() can report the error more accurately. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08virtio-pci: Use DEV_NVECTORS_UNSPECIFIED instead of -1 for virtio-serialAmit Shah
Use the named constant instead of -1. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08qdev: Add a DEV_NVECTORS_UNSPECIFIED enum for unspecified nr of MSI vectorsAmit Shah
net.c used a constant to signify no MSI vectors were specified. Extend that to all qdev devices. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08pcnet APROMWE bit location (retry)Chris Kilgour
According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2. Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08move x509 file name defines to qemu-x509.hGerd Hoffmann
Want share them with vnc and spice. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08adding helper pci functionsIzik Eidus
Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08QMP: Introduce RTC_CHANGE eventLuiz Capitulino
Emitted whenever the RTC time changes. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08QMP: Revamp the qmp-events.txt fileLuiz Capitulino
Now we can say it's useful, the following changes have been made: - Put events in alphabetical order - Add examples to all events - Document all 'data' members - Small corrections and cleanups Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 11:56:33 +0000