aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-10qcow2: Flushing the caches in qcow2_close may failMax Reitz
qcow2_cache_flush() may fail; if one of the caches failed to be flushed successfully to disk in qcow2_close() the image should not be marked clean, and we should emit a warning. This breaks the (qcow2-specific) iotests 026, 071 and 089; change their output accordingly. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qcow2: Prevent numerical overflowMax Reitz
In qcow2_alloc_cluster_offset(), *num is limited to INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is of type uint64_t, we might as well cast *num to that type before performing the shift. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Add test for unsupported image creationMax Reitz
Add a test for creating and amending images (amendment uses the creation options) with formats not supporting creation over protocols not supporting creation. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Only kill NBD server if it runsMax Reitz
There may be NBD tests which do not create a sample image and simply test whether wrong usage of the protocol is rejected as expected. In this case, there will be no NBD server and trying to kill it during clean-up will fail. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-img: Check create_opts before image amendmentMax Reitz
The image options which can be amended are described by the .create_opts field for every driver. This field must therefore be non-NULL so that anything can be amended in the first place. Check that this holds true before going into qemu_opts_create() (because if .create_opts is NULL, the create_opts pointer in img_amend() will be NULL after qemu_opts_append()). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-img: Check create_opts before image creationMax Reitz
If a driver supports image creation, it needs to set the .create_opts field. We can use that to make sure .create_opts for both drivers involved is not NULL for the target image in qemu-img convert, which is important so that the create_opts pointer in img_convert() is not NULL after the qemu_opts_append() calls and when going into qemu_opts_create(). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Check create_opts before image creationMax Reitz
If a driver supports image creation, it needs to set the .create_opts field. We can use that to make sure .create_opts for both drivers involved is not NULL in bdrv_img_create(), which is important so that the create_opts pointer in that function is not NULL after the qemu_opts_append() calls and when going into qemu_opts_create(). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/nfs: Add create_optsMax Reitz
The nfs protocol driver is capable of creating images, but did not specify any creation options. Fix it. A way to test this issue is the following: $ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M Without this patch, it segfaults. With this patch, it does not. However, this is not something that should really work; qemu-img should check whether the parameter for the -f option (and -O for convert) is indeed a format, and error out if it is not. Therefore, I am not making it an iotest. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/vvfat: qcow driver may not be foundMax Reitz
Although virtually impossible right now, bdrv_find_format("qcow") may fail. The vvfat block driver should heed that case. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Omit bdrv_find_format for essential driversMax Reitz
We can always assume raw, file and qcow2 being available; so do not use bdrv_find_format() to locate their BlockDriver objects but statically reference the respective objects. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Make essential BlockDriver objects publicMax Reitz
There are some block drivers which are essential to QEMU and may not be removed: These are raw, file and qcow2 (as the default non-raw format). Make their BlockDriver objects public so they can be directly referenced throughout the block layer without needing to call bdrv_find_format() and having to deal with an error at runtime, while the real problem occurred during linking (where raw, file or qcow2 were not linked into qemu). Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Specify qcow2 format for qemu-io in 059Max Reitz
There are two instances of iotest 059 using qemu-io on a qcow2 image. As of "qemu-iotests: Use qemu-io -f $IMGFMT" the iotests can no longer rely on $QEMU_IO doing probing, therefore the qcow2 format has to be specified explicitly here. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10ide: Check validity of logical block sizeKevin Wolf
Our IDE emulation can't handle logical block sizes other than 512. Check for it. The original assumption was that other values would silently be ignored (which is bad enough), but it's not quite true: The physical block size is exposed in IDENTIFY DEVICE as a multiple of the logical block size. Setting a logical block size therefore also corrupts the physical block size (4096/4096 doesn't silently downgrade to 4096/512, but 512/512). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2014-12-10nvme: 64kB page size fixesAnton Blanchard
Initialise our maximum page size capability to 64kB and increase the page_size variable from 16 to 32 bits. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: 082: Filter the real disk sizeMichael Mueller
The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 082. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: 060: Filter the real disk sizeKevin Wolf
The real on-disk size of an image depends on things like the host filesystem. _img_info already filters it out, use the function in 060. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-12-10block: do not use get_clock()Paolo Bonzini
Use the external qemu-timer API instead. No one else should be calling cpu_get_clock(), get_clock() and get_clock_realtime() directly; they are internal functions and they should be confined to qemu-timer.c and cpus.c (where the icount implementation resides). All accesses should go through qemu_clock_get_ns. Cc: kwolf@redhat.com Cc: stefanha@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1417010463-3527-2-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Don't probe for unknown backing file formatKevin Wolf
If a qcow2 image specifies a backing file format that doesn't correspond to any format driver that qemu knows, we shouldn't fall back to probing, but simply error out. Not looking up the backing file driver in bdrv_open_backing_file(), but just filling in the "driver" option if it isn't there moves us closer to the goal of having everything in QDict options and gets us the error handling of bdrv_open(), which correctly refuses unknown drivers. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qcow2.py: Add required padding for header extensionsKevin Wolf
The qcow2 specification requires that the header extension data be padded to round up the extension size to the next multiple of 8 bytes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qcow2: Fix header extension size checkKevin Wolf
After reading the extension header, offset is incremented, but not checked against end_offset any more. This way an integer overflow could happen when checking whether the extension end is within the allowed range, effectively disabling the check. This patch adds the missing check and a test case for it. Cc: qemu-stable@nongnu.org Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: check for BLOCK_OP_TYPE_INTERNAL_SNAPSHOTStefan Hajnoczi
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT op blocker exists but was never used! Let's fix that so internal snapshots can be blocked. [Fixed s/external/internal/ typo as pointed out by Paolo Bonzini and Max Reitz. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: acquire AioContext in QMP 'transaction' actionsStefan Hajnoczi
The transaction QMP command performs operations atomically on a group of drives. This command needs to acquire AioContext in order to work safely when virtio-blk dataplane IOThreads are accessing drives. The transactional nature of the command means that actions are split into prepare, commit, abort, and clean functions. Acquire the AioContext in prepare and don't release it until one of the other functions is called. This prevents the IOThread from running the AioContext before the transaction has completed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-4-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: drop unnecessary DriveBackupState field assignmentStefan Hajnoczi
drive_backup_prepare() assigns DriveBackupState fields to NULL in the error path. This is unnecessary because the DriveBackupState is allocated using g_malloc0() and other functions like external_snapshot_prepare() already rely on this. Do not explicitly assign fields to NULL so that the error path is concise and does not require modification when fields are added to DriveBackupState. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-3-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blockdev: update outdated qmp_transaction() commentsStefan Hajnoczi
Originally the transaction QMP command was just for taking snapshots. The command became more general when drive-backup and abort were added. It is more accurate to say the command is about performing operations on an atomic group than to say it is about snapshots. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416566940-4430-2-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Test writing non-raw image headers to raw imageKevin Wolf
This is forbidden if the raw driver was probed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-10-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Fix stderr handling in common.qemuKevin Wolf
The original intention was to pipe stderr of qemu into $fifo_out. However, the redirections were specified in the wrong order for this. This patch fixes it. Now qemu's output on stderr can be retrieved with _send_qemu_cmd, which applies several useful filters on the output that were missing before. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-9-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10raw: Prohibit dangerous writes for probed imagesKevin Wolf
If the user neglects to specify the image format, QEMU probes the image to guess it automatically, for convenience. Relying on format probing is insecure for raw images (CVE-2008-2004). If the guest writes a suitable header to the device, the next probe will recognize a format chosen by the guest. A malicious guest can abuse this to gain access to host files, e.g. by crafting a QCOW2 header with backing file /etc/shadow. Commit 1e72d3b (April 2008) provided -drive parameter format to let users disable probing. Commit f965509 (March 2009) extended QCOW2 to optionally store the backing file format, to let users disable backing file probing. QED has had a flag to suppress probing since the beginning (2010), set whenever a raw backing file is assigned. All of these additions that allow to avoid format probing have to be specified explicitly. The default still allows the attack. In order to fix this, commit 79368c8 (July 2010) put probed raw images in a restricted mode, in which they wouldn't be able to overwrite the first few bytes of the image so that they would identify as a different image. If a write to the first sector would write one of the signatures of another driver, qemu would instead zero out the first four bytes. This patch was later reverted in commit 8b33d9e (September 2010) because it didn't get the handling of unaligned qiov members right. Today's block layer that is based on coroutines and has qiov utility functions makes it much easier to get this functionality right, so this patch implements it. The other differences of this patch to the old one are that it doesn't silently write something different than the guest requested by zeroing out some bytes (it fails the request instead) and that it doesn't maintain a list of signatures in the raw driver (it calls the usual probe function instead). Note that this change doesn't introduce new breakage for false positive cases where the guest legitimately writes data into the first sector that matches the signatures of an image format (e.g. for nested virt): These cases were broken before, only the failure mode changes from corruption after the next restart (when the wrong format is probed) to failing the problematic write request. Also note that like in the original patch, the restrictions only apply if the image format has been guessed by probing. Explicitly specifying a format allows guests to write anything they like. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Read only one sector for format probingKevin Wolf
The only image format driver that even potentially accesses anything after 512 bytes in its bdrv_probe() implementation is VMDK, which reads a plain-text descriptor file. In practice, the field it's looking for seems to come first and will be well within the first 512 bytes, too. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-7-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Factor bdrv_probe_all() out of find_image_format()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-6-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qtests: Specify image format explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Add qemu-io format option in Python testsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-4-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-iotests: Use qemu-io -f $IMGFMTKevin Wolf
This patch changes $QEMU_IO so that all tests by default pass a format argument to qemu-io. There are a few cases where -f $IMGFMT is not wanted because it selects the wrong driver or json: filenames including a driver are used. They are changed to use $QEMU_IO_PROG, which doesn't include any options. Tests 071 and 081 have output changes because now the actual request fails instead of reading the 2k probing buffer. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-io: Allow explicitly specifying formatKevin Wolf
This adds a -f option to qemu-io which allows to explicitly specify the block driver to use for the given image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-2-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10tests: Use "command -v" instead of which(1) in shell scriptsFam Zheng
When which(1) is not installed, we would complain "perl not found" because it's the first set_prog_path check. The error message is wrong. Fix it by using "command -v", a native way to query the existence of a command. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1416380832-9697-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qemu-nbd: Use BlockBackend where reasonableMax Reitz
Because qemu-nbd creates the BlockBackend by itself, it should create the according BlockDriverState tree by itself as well; that means, it has call bdrv_open() on its own. This is one of the places where qemu-nbd still needs to use a BlockDriverState directly (the root BDS below the BB); other places are the configuration of zero detection (which may be lifted into the BB eventually, but is not yet) and temporarily loading a snapshot. Everywhere else, though, qemu-nbd can and thus should use BlockBackend. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-7-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10nbd: Use BlockBackend internallyMax Reitz
With all externally visible functions changed to use BlockBackend, this patch makes nbd use BlockBackend for everything internally as well. While touching them, substitute 512 by BDRV_SECTOR_SIZE in the calls to blk_read(), blk_write() and blk_co_discard(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-6-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10nbd: Change external interface to BlockBackendMax Reitz
Substitute BlockDriverState by BlockBackend in every globally visible function provided by nbd. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-5-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add blk_add_close_notifier() for BBMax Reitz
Adding something like a "delete notifier" to a BlockBackend would not make much sense, because whoever is interested in registering there will probably hold a reference to that BlockBackend; therefore, the notifier will never be called (or only when the notifiee already relinquished its reference and thus most probably is no longer interested in that notification). Therefore, this patch just passes through the close notifier interface of the root BDS. This will be called when the device is ejected, for instance, and therefore does make sense. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Add AioContextNotifier functions to BBMax Reitz
Because all BlockDriverStates behind a single BlockBackend reside in a single AioContext, it is fine to just pass these functions (blk_add_aio_context_notifier() and blk_remove_aio_context_notifier()) through to the root BlockDriverState. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block: Lift more functions into BlockBackendMax Reitz
There are already some blk_aio_* functions, so we might as well have blk_co_* functions (as far as we need them). This patch adds blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which is not a blk_co_* function but is needed nonetheless). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10ahci: replace SATA FIS type magic numbers with constantsStefan Hajnoczi
SATA 3.0 "10.3.1 FIS Type values" defines the constants used to differentiate between FIS types. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1415874281-7371-3-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10ahci: avoid #ifdef DEBUG_AHCI bitrotStefan Hajnoczi
Debug code using #ifdef is susceptible to bitrot because the compiler never checks the debug code. This is easy to avoid, change the DPRINTF() macro to use if (DEBUG_AHCI) and always give it a 0 or 1 value. This also allows us to drop an #ifdef DEBUG_AHCI in ahci_start_dma() since the compiler can now see the local variable is used. The motivation for this change is a recent DEBUG_AHCI build failure due to an outdated DPRINTF() format string. From now on the compiler will catch these errors. Cc: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1415874281-7371-2-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10iotests: Plain blkdebug filename generationMax Reitz
Add one test whether blkdebug is able to generate a plain filename if given a configuration file and a file to be tested only; and add another test whether blkdebug is able to do the same without being given a configuration file. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1415697825-26678-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10blkdebug: Simplify and improve filename generationMax Reitz
Instead of actually recreating the options from scratch, just reuse the options given for creating the BDS, which are the configuration file name and additional options. In case there are no additional options we can thus create a plain filename. This obviously results in a different output for qemu-iotest 099 which exactly tests this filename generation. Fix it up as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10monitor: Fix HMP tab completionKevin Wolf
Commands with multiple boolean flag options (like 'info block') didn't provide correct completion because only the first one was skipped. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Allow node-name in 'info block'Kevin Wolf
The optional parameter specifying a block device allows now to use a node-name instead of a drive name (and therefore to inspect any node in the graph). The new -n options allows listing all named nodes instead of BlockBackends. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Allow info = NULL in print_block_info()Kevin Wolf
This allows printing infos of BlockDriverStates that aren't at the root of the graph (and logically implementing a BlockBackend). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Factor out print_block_info()Kevin Wolf
The new function prints the info for a single BlockDriverState. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/qapi: Add cache information to query-blockKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-10blockdev: acquire AioContext in change-backing-fileStefan Hajnoczi
Add dataplane support to the change-backing-file QMP commands. By acquiring the AioContext we avoid race conditions with the dataplane thread which may also be accessing the BlockDriverState. Note that this command operates on both bs and a node in its chain (image_bs). The bdrv_chain_contains(bs, image_bs) check guarantees that bs and image_bs are in the same AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 23:14:04 +0000