aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-06mips: Initialize MT state at resetEdgar E. Iglesias
Only TC0 on VPE0 is active after reset. All other VPEs and TCs start in sleep. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Default to using one VPE and one TC.Edgar E. Iglesias
Boards can override the setup if needed. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Enable VInt interrupt mode for the 34KfEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Correct VInt vector generationEdgar E. Iglesias
1. The pending need to pass the Status IM gating. 2. The priority is from seven (highest prio) down to zero. QEMU was doing the opposite. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Correct IntCtl write mask for VIntEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Hook in more reg accesses via mttr/mftrEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Synchronize CP0 TCSTatus, Status and EntryHiEdgar E. Iglesias
These registers share some of their fields. Writes to these fields should be visible through the corresponding mirror fields. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Handle TC indexing of other VPEsEdgar E. Iglesias
Introduce mips_cpu_map_tc() to map a global TC index into a VPE nr and local tc index. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-04apb_pci: convert PCI space to memory APIBlue Swirl
Add a new memory space for PCI instead of using system memory. This also fixes a bug where VGA region vga.chain4 is accidentally mapped to 0xa0000 instead of 0x1ff000a0000. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-04fw_cfg: fix crash if FW_CFG_WRITE_CHANNEL is used incorrectlyBlue Swirl
Avoid a crash if the guest combines FW_CFG_WRITE_CHANNEL with a wrong value. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03softfloat: Use uint32 consistentlyAndreas Färber
Prepares for uint32 replacement. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03softfloat: Use uint16 consistentlyAndreas Färber
Prepares for uint16 replacement. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Allow overriding the location of Samba's smbd.Brad
Allow overriding the location of Samba's smbd. Pretty much every OS I look at has some means of changing this path (patching) so lets just make it easier for OS developers creating packages and/or end users to override the location. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03Add new macro QEMU_PACKED for packed C structuresStefan Weil
A packed struct needs different gcc attributes for compilations with MinGW compilers because glib-2.0 adds compiler flag -mms-bitfields which modifies the packing algorithm. Attribute gcc_struct reverses the negative effects of -mms-bitfields. QEMU_PACKED sets this attribute and must be used for any packed struct which is affected by -mms-bitfields. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-02rename qemu_malloc and related to glib names for coherenceFrediano Ziglio
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Fix install(1) usage to be compatible with OpenBSD's install(1).Brad
Fix install(1) usage to be compatible with OpenBSD's install(1). When creating a directory via the -d flag the -p flag cannot be used at the same time. Also in the context of installing QEMU it doesn't make sense to use the -p flag anyway so use the [default] -c flag instead. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Rename qemu -> qemu-system-i386Anthony Liguori
This has been discussed before in the past. The special casing really makes no sense anymore. This seems like a good change to make for 1.0. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02main: force enabling of I/O threadAnthony Liguori
Enabling the I/O thread by default seems like an important part of declaring 1.0. Besides allowing true SMP support with KVM, the I/O thread means that the TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which currently requires a (racey) signal based alarm system. I know there have been concerns about performance. I think so far the ones that have come up (virtio-net) are most likely due to secondary reasons like decreased batching. I think we ought to force enabling I/O thread early in 1.0 development and commit to resolving any lingering issues. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02trace: fix out-of-tree buildsAnthony Liguori
Reported-by: Lluis Vilanova <vilanova@ac.upc.edu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-02Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
2011-09-01Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-09-01Merge remote-tracking branch 'qemu-kvm-tmp/memory/core' into stagingAnthony Liguori
2011-09-01build: sort objects to remove duplicates for linkStefan Hajnoczi
Avoid duplicate object files during the link. There are legitimate cases where a link command-line would include duplicate object files because two independent subsystems both depend on common infrastructure. Use GNU make's $(sort) function to remove duplicate object files from the link command-line. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01main: switch qemu_set_fd_handler to g_io_add_watchAnthony Liguori
This patch changes qemu_set_fd_handler to be implemented in terms of g_io_add_watch(). The semantics are a bit different so some glue is required. qemu_set_fd_handler2 is much harder to convert because of its use of polling. The glib main loop has the major of advantage of having a proven thread safe architecture. By using the glib main loop instead of our own, it will allow us to eventually introduce multiple I/O threads. I'm pretty sure that this will work on Win32, but I would appreciate some help testing. I think the semantics of g_io_channel_unix_new() are really just tied to the notion of a "unix fd" and not necessarily unix itself. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01Add glib support to main loopAnthony Liguori
This allows GSources to be used to register callback events in QEMU. This is useful as it allows us to take greater advantage of glib and also because it allows us to write code that is more easily testable outside of QEMU since we can make use of glib's main loop in unit tests. All new code should use glib's callback mechanisms for registering fd events which are very well documented at: http://developer.gnome.org/glib/stable/glib-The-Main-Event-Loop.html And: http://developer.gnome.org/gio/stable/ Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-01tcg/ppc/tcg-target.c: Avoid 'set but not used' gcc warningsPeter Maydell
Move the declaration and initialisation of some variables in tcg_out_qemu_ld and tcg_out_qemu_st inside CONFIG_SOFTMMU, to avoid the "variable set but not used" warning of gcc 4.6. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: malc <av1474@comtv.ru>
2011-09-01simpletrace: fix process() argument countStefan Hajnoczi
The simpletrace.process() function invokes analyzer methods with the wrong number of arguments if a timestamp should be included. This patch fixes the issue so that trace analysis scripts can make use of timestamps. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01trace: enable all eventsLluís
Given that all events with programmatically-controlled state are disabled by default, we can delete the "disable" property from all events. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [stderr] add support for dynamically enabling/disabling eventsLluís
Uses the generic interface provided in "trace/control.h" in order to provide a programmatic interface as well as command line and monitor controls. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [simple] disable all trace points by defaultLluís
Note that this refers to the backend-specific state (whether the output must be generated), not the event "disabled" property (which always uses the "nop" backend). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: always use the "nop" backend on events with the "disable" keywordLluís
Any event with the keyword/property "disable" generates an empty trace event using the "nop" backend, regardless of the current backend. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: add "-trace events" argument to control initial stateLluís
The "-trace events" argument can be used to provide a file with a list of trace event names that will be enabled prior to starting execution, thus providing early tracing. This saves the user from manually toggling event states through the monitor interface or whichever backend-specific interface. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: always compile support for controlling and querying trace event statesLluís
The current interface is generic for this small set of operations, and thus other backends can easily modify the "trace/control.c" file to add their own implementation. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: separate trace event control and query routines from the simple backendLluís
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively) in the "trace/control.h" file. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: generalize the "property" concept in the trace-events fileLluís
This adds/modifies the following functions: * get_name: Get _only_ the event name * has_property: Return whether an event has a property (keyword before the event name) Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: avoid conditional code compilation during option parsingLluís
A default implementation for backend-specific routines is provided in "trace/default.c", which backends can override by setting "trace_default=no" in "configure". Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: move backend-specific code into the trace/ directoryLluís
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [make] replace 'ifeq' with values in CONFIG_TRACE_*Lluís
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*Lluís
Provides a more hierarchical view of the variable domain. Also adds the CONFIG_TRACE_* variables for all backends. [Stefan added missing 'test' in stap if statement] Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01build: [simple] Include qemu-timer-common.o in trace-obj-yLluís
Helper programs like qemu-ga use tracing primitives, but qemu-timer-common.o (also used by simpletrace.o) is not necessarily included in the linkage line. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01build: Fix linkage of QEMU_PROGLluís
Using '$^' to establish the files to link with will remove any repeated entries in the list of dependencies. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-08-31tusb6010: Convert to qdevPeter Maydell
Convert the tusb6010 to qdev. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-30memory: Fix memory_region_get_ram_ptr for ROM devicesJan Kiszka
Mask out the sub-page bits that are used by ROM device for storing the io-index and the IO_MEM_ROMD flag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-29Merge branch 'omap-for-upstream' of ↵Edgar E. Iglesias
git://git.linaro.org/people/pmaydell/qemu-arm into pm
2011-08-29Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-08-29Merge remote-tracking branch 'qemu-kvm/memory/core' into stagingAnthony Liguori
2011-08-29Merge remote-tracking branch 'qemu-kvm/memory/urgent' into stagingAnthony Liguori
2011-08-29Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-08-29Merge remote-tracking branch 'qmp/queue/monitor' into stagingAnthony Liguori
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 12:30:28 +0000