aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-02glib-compat: add g_unix_get_passwd_entry_qemu()Marc-André Lureau
The glib function was introduced in 2.64. It's a safer version of getpwnam, and also simpler to use than getpwnam_r. Currently, it's only use by the next patch in qemu-ga, which doesn't (well well...) need the thread safety guarantees. Since the fallback version is still unsafe, I would rather keep the _qemu postfix, to make sure it's not being misused by mistake. When/if necessary, we can implement a safer fallback and drop the _qemu suffix. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> *fix checkpatch warnings about newlines before/after block comments Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: add implementation of guest-get-disks for WindowsTomáš Golembiovský
The command lists all the physical disk drives. Unlike for Linux partitions and virtual volumes are not listed. Example output: { "return": [ { "name": "\\\\.\\PhysicalDrive0", "partition": false, "address": { "serial": "QM00001", "bus-type": "sata", ... }, "dependents": [] } ] } Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: add implementation of guest-get-disks for LinuxTomáš Golembiovský
The command lists all disks (real and virtual) as well as disk partitions. For each disk the list of dependent disks is also listed and /dev path is used as a handle so it can be matched with "name" field of other returned disk entries. For disk partitions the "dependents" list is populated with the the parent device for easier tracking of hierarchy. Example output: { "return": [ ... { "name": "/dev/dm-0", "partition": false, "dependents": [ "/dev/sda2" ], "alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7" }, { "name": "/dev/sda2", "partition": true, "dependents": [ "/dev/sda" ] }, { "name": "/dev/sda", "partition": false, "address": { "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493", "bus-type": "sata", ... "dev": "/dev/sda", "target": 0 }, "dependents": [] }, ... ] } Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> *add missing stub for !defined(CONFIG_FSFREEZE) *remove unused deps_dir variable Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: add command guest-get-disksTomáš Golembiovský
Add API and stubs for new guest-get-disks command. The command guest-get-fsinfo can be used to list information about disks and partitions but it is limited only to mounted disks with filesystem. This new command should allow listing information about disks of the VM regardles whether they are mounted or not. This can be usefull for management applications for mapping virtualized devices or pass-through devices to device names in the guest OS. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: Flatten simple union GuestDeviceIdMarkus Armbruster
Simple unions are simpler than flat unions in the schema, but more complicated in C and on the QMP wire: there's extra indirection in C and extra nesting on the wire, both pointless. They should be avoided in new code. GuestDeviceId was recently added for guest-get-devices. Convert it to a flat union. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga-win: Fix guest-get-devices error API violationsMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. qmp_guest_get_devices() is wrong that way: it calls error_setg() in a loop. If no iteration fails, the function returns a value and sets no error. Okay. If exactly one iteration fails, the function returns a value and sets an error. Wrong. If multiple iterations fail, the function trips error_setv()'s assertion. Fix it to return immediately on error. Perhaps the failure to convert the driver version to UTF-8 should not be an error. We could simply not report the botched version string instead. Drop a superfluous continue while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: Use common time encoding for guest-get-devices 'driver-date'Markus Armbruster
guest-get-devices returns 'driver-date' as string in the format YYYY-MM-DD. Goes back to recent commit 2e4211cee4 "qga: add command guest-get-devices for reporting VirtIO devices". We should avoid use of multiple encodings for the same kind of data. Especially string encodings. Change it to return nanoseconds since the epoch, like guest-get-time does. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02qga: Rename guest-get-devices return member 'address' to 'id'Markus Armbruster
Member 'address' is union GuestDeviceAddress with a single branch GuestDeviceAddressPCI, containing PCI vendor ID and device ID. This is not a PCI address. Type GuestPCIAddress is. Messed up in recent commit 2e4211cee4 "qga: add command guest-get-devices for reporting VirtIO devices". Rename type GuestDeviceAddressPCI to GuestDeviceIdPCI, type GuestDeviceAddress to GuestDeviceId, and member 'address' to 'id'. Document the member properly while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20201101.0' ↵Peter Maydell
into staging VFIO update 2020-11-01 * Migration support (Kirti Wankhede) * s390 DMA limiting (Matthew Rosato) * zPCI hardware info (Matthew Rosato) * Lock guard (Amey Narkhede) * Print fixes (Zhengui li) * Warning/build fixes # gpg: Signature made Sun 01 Nov 2020 20:38:10 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20201101.0: (32 commits) vfio: fix incorrect print type hw/vfio: Use lock guard macros s390x/pci: get zPCI function info from host vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilities s390x/pci: use a PCI Function structure s390x/pci: clean up s390 PCI groups s390x/pci: use a PCI Group structure s390x/pci: create a header dedicated to PCI CLP s390x/pci: Honor DMA limits set by vfio s390x/pci: Add routine to get the vfio dma available count vfio: Find DMA available capability vfio: Create shared routine for scanning info capabilities s390x/pci: Move header files to include/hw/s390x linux-headers: update against 5.10-rc1 update-linux-headers: Add vfio_zdev.h qapi: Add VFIO devices migration stats in Migration stats vfio: Make vfio-pci device migration capable vfio: Add ioctl to get dirty pages bitmap during dma unmap vfio: Dirty page tracking when vIOMMU is enabled vfio: Add vfio_listener_log_sync to mark dirty pages ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-01vfio: fix incorrect print typeZhengui li
The type of input variable is unsigned int while the printer type is int. So fix incorrect print type. Signed-off-by: Zhengui li <lizhengui@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01hw/vfio: Use lock guard macrosAmey Narkhede
Use qemu LOCK_GUARD macros in hw/vfio. Saves manual unlock calls Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: get zPCI function info from hostMatthew Rosato
We use the capability chains of the VFIO_DEVICE_GET_INFO ioctl to retrieve the CLP information that the kernel exports. To be compatible with previous kernel versions we fall back on previous predefined values, same as the emulation values, when the ioctl is found to not support capability chains. If individual CLP capabilities are not found, we fall back on default values for only those capabilities missing from the chain. This patch is based on work previously done by Pierre Morel. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilitiesMatthew Rosato
Now that VFIO_DEVICE_GET_INFO supports capability chains, add a helper function to find specific capabilities in the chain. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Function structurePierre Morel
We use a ClpRspQueryPci structure to hold the information related to a zPCI Function. This allows us to be ready to support different zPCI functions and to retrieve the zPCI function information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: clean up s390 PCI groupsMatthew Rosato
Add a step to remove all stashed PCI groups to avoid stale data between machine resets. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Group structurePierre Morel
We use a S390PCIGroup structure to hold the information related to a zPCI Function group. This allows us to be ready to support multiple groups and to retrieve the group information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: create a header dedicated to PCI CLPPierre Morel
To have a clean separation between s390-pci-bus.h and s390-pci-inst.h headers we export the PCI CLP instructions in a dedicated header. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Honor DMA limits set by vfioMatthew Rosato
When an s390 guest is using lazy unmapping, it can result in a very large number of oustanding DMA requests, far beyond the default limit configured for vfio. Let's track DMA usage similar to vfio in the host, and trigger the guest to flush their DMA mappings before vfio runs out. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Add routine to get the vfio dma available countMatthew Rosato
Create new files for separating out vfio-specific work for s390 pci. Add the first such routine, which issues VFIO_IOMMU_GET_INFO ioctl to collect the current dma available count. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: Fix non-Linux build with CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Find DMA available capabilityMatthew Rosato
The underlying host may be limiting the number of outstanding DMA requests for type 1 IOMMU. Add helper functions to check for the DMA available capability and retrieve the current number of DMA mappings allowed. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: vfio_get_info_dma_avail moved inside CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Create shared routine for scanning info capabilitiesMatthew Rosato
Rather than duplicating the same loop in multiple locations, create a static function to do the work. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Move header files to include/hw/s390xMatthew Rosato
Seems a more appropriate location for them. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01linux-headers: update against 5.10-rc1Matthew Rosato
commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> [aw: drop pvrdma_ring.h changes to avoid revert of d73415a31547 ("qemu/atomic.h: rename atomic_ to qatomic_")] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01update-linux-headers: Add vfio_zdev.hMatthew Rosato
vfio_zdev.h is used by s390x zPCI support to pass device-specific CLP information between host and userspace. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Make vfio-pci device migration capableKirti Wankhede
If the device is not a failover primary device, call vfio_migration_probe() and vfio_migration_finalize() to enable migration support for those devices that support it respectively to tear it down again. Removed migration blocker from VFIO PCI device specific structure and use migration blocker from generic structure of VFIO device. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add ioctl to get dirty pages bitmap during dma unmapKirti Wankhede
With vIOMMU, IO virtual address range can get unmapped while in pre-copy phase of migration. In that case, unmap ioctl should return pages pinned in that range and QEMU should find its correcponding guest physical addresses and report those dirty. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> [aw: fix error_report types, fix cpu_physical_memory_set_dirty_lebitmap() cast] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Dirty page tracking when vIOMMU is enabledKirti Wankhede
When vIOMMU is enabled, register MAP notifier from log_sync when all devices in container are in stop and copy phase of migration. Call replay and get dirty pages from notifier callback. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add vfio_listener_log_sync to mark dirty pagesKirti Wankhede
vfio_listener_log_sync gets list of dirty pages from container using VFIO_IOMMU_GET_DIRTY_BITMAP ioctl and mark those pages dirty when all devices are stopped and saving state. Return early for the RAM block section of mapped MMIO region. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> [aw: fix error_report types, fix cpu_physical_memory_set_dirty_lebitmap() cast] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add function to start and stop dirty pages trackingKirti Wankhede
Call VFIO_IOMMU_DIRTY_PAGES ioctl to start and stop dirty pages tracking for VFIO devices. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Get migration capability flags for containerKirti Wankhede
Added helper functions to get IOMMU info capability chain. Added function to get migration capability information from that capability chain for IOMMU container. Similar change was proposed earlier: https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg03759.html Disable migration for devices if IOMMU module doesn't support migration capability. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01memory: Set DIRTY_MEMORY_MIGRATION when IOMMU is enabledKirti Wankhede
mr->ram_block is NULL when mr->is_iommu is true, then fr.dirty_log_mask wasn't set correctly due to which memory listener's log_sync doesn't get called. This patch returns log_mask with DIRTY_MEMORY_MIGRATION set when IOMMU is enabled. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add load state functions to SaveVMHandlersKirti Wankhede
Sequence during _RESUMING device state: While data for this device is available, repeat below steps: a. read data_offset from where user application should write data. b. write data of data_size to migration region from data_offset. c. write data_size which indicates vendor driver that data is written in staging buffer. For user, data is opaque. User should write data in the same order as received. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add save state functions to SaveVMHandlersKirti Wankhede
Added .save_live_pending, .save_live_iterate and .save_live_complete_precopy functions. These functions handles pre-copy and stop-and-copy phase. In _SAVING|_RUNNING device state or pre-copy phase: - read pending_bytes. If pending_bytes > 0, go through below steps. - read data_offset - indicates kernel driver to write data to staging buffer. - read data_size - amount of data in bytes written by vendor driver in migration region. - read data_size bytes of data from data_offset in the migration region. - Write data packet to file stream as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data, VFIO_MIG_FLAG_END_OF_STATE } In _SAVING device state or stop-and-copy phase a. read config space of device and save to migration file stream. This doesn't need to be from vendor driver. Any other special config state from driver can be saved as data in following iteration. b. read pending_bytes. If pending_bytes > 0, go through below steps. c. read data_offset - indicates kernel driver to write data to staging buffer. d. read data_size - amount of data in bytes written by vendor driver in migration region. e. read data_size bytes of data from data_offset in the migration region. f. Write data packet as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data} g. iterate through steps b to f while (pending_bytes > 0) h. Write {VFIO_MIG_FLAG_END_OF_STATE} When data region is mapped, its user's responsibility to read data from data_offset of data_size before moving to next steps. Added fix suggested by Artem Polyakov to reset pending_bytes in vfio_save_iterate(). Added fix suggested by Zhi Wang to add 0 as data size in migration stream and add END_OF_STATE delimiter to indicate phase complete. Suggested-by: Artem Polyakov <artemp@nvidia.com> Suggested-by: Zhi Wang <zhi.wang.linux@gmail.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Register SaveVMHandlers for VFIO deviceKirti Wankhede
Define flags to be used as delimiter in migration stream for VFIO devices. Added .save_setup and .save_cleanup functions. Map & unmap migration region from these functions at source during saving or pre-copy phase. Set VFIO device state depending on VM's state. During live migration, VM is running when .save_setup is called, _SAVING | _RUNNING state is set for VFIO device. During save-restore, VM is paused, _SAVING state is set for VFIO device. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add migration state change notifierKirti Wankhede
Added migration state change notifier to get notification on migration state change. These states are translated to VFIO device state and conveyed to vendor driver. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add VM state change handler to know state of VMKirti Wankhede
VM state change handler is called on change in VM's state. Based on VM state, VFIO device state should be changed. Added read/write helper functions for migration region. Added function to set device_state. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: lx -> HWADDR_PRIx, remove redundant parens] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add migration region initialization and finalize functionKirti Wankhede
Whether the VFIO device supports migration or not is decided based of migration region query. If migration region query is successful and migration region initialization is successful then migration is supported else migration is blocked. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add save and load functions for VFIO PCI devicesKirti Wankhede
Added functions to save and restore PCI device specific data, specifically config space of PCI device. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add vfio_get_object callback to VFIODeviceOpsKirti Wankhede
Hook vfio_get_object callback for PCI devices. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add function to unmap VFIO regionKirti Wankhede
This function will be used for migration region. Migration region is mmaped when migration starts and will be unmapped when migration is complete. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-10-27-v2' ↵Peter Maydell
into staging nbd patches for 2020-10-27 - Tweak the new block-export-add QMP command - Allow multiple -B options for qemu-nbd - Add qemu:allocation-depth metadata context as qemu-nbd -A - Improve iotest use of NBD # gpg: Signature made Fri 30 Oct 2020 20:22:42 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2020-10-27-v2: nbd: Add 'qemu-nbd -A' to expose allocation depth nbd: Add new qemu:allocation-depth metadata context block: Return depth level during bdrv_is_allocated_above nbd: Allow export of multiple bitmaps for one device nbd: Refactor counting of metadata contexts nbd: Simplify qemu bitmap context name nbd: Update qapi to support exporting multiple bitmaps nbd: Utilize QAPI_CLONE for type conversion qapi: Add QAPI_LIST_PREPEND() macro block: Simplify QAPI_LIST_ADD iotests/291: Stop NBD server iotests/291: Filter irrelevant parts of img-info Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-01Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,vhost,virtio: misc fixes Just a bunch of bugfixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 30 Oct 2020 12:44:31 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: intel_iommu: Fix two misuse of "0x%u" prints virtio: skip guest index check on device load vhost-blk: set features before setting inflight feature pci: Disallow improper BAR registration for type 1 pci: Change error_report to assert(3) pci: advertise a page aligned ATS pc: Implement -no-hpet as sugar for -machine hpet=on vhost: Don't special case vq->used_phys in vhost_get_log_size() pci: Assert irqnum is between 0 and bus->nirqs in pci_bus_change_irq_level hw/pci: Extract pci_bus_change_irq_level() from pci_change_irq_level() hw/virtio/vhost-vdpa: Fix Coverity CID 1432864 acpi/crs: Support ranges > 32b for hosts acpi/crs: Prevent bad ranges for host bridges vhost-vsock: set vhostfd to non-blocking mode vhost-vdpa: negotiate VIRTIO_NET_F_STATUS with driver Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-31Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/modules-20201029-pull-request' into staging modules: build virtio-gpu-pci & virtio-vga modular. modules: various bugfixes, mostly for macos. # gpg: Signature made Thu 29 Oct 2020 11:09:41 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/modules-20201029-pull-request: modules: turn off lazy binding modules: unbreak them on macos virtio-gpu: only compile virtio-gpu-3d.c for CONFIG_VIRGL=y virtio-gpu: add virtio-vga module virtio-gpu: add virtio-gpu-pci module Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-31Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging Misc fixes * Improve socket cnnection failure error reporting * Fix LGPL version number # gpg: Signature made Thu 29 Oct 2020 10:00:47 GMT # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange-gitlab/tags/misc-next-pull-request: util: include the target address in socket connect failures io: Don't use '#' flag of printf format authz: Fix Lesser GPL version number crypt: Fix Lesser GPL version number io: Fix Lesser GPL version number Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-31Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' ↵Peter Maydell
into staging qemu-sparc queue # gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-20201028: hw/pci-host/sabre: Simplify code initializing variable once hw/pci-host/sabre: Remove superfluous address range check hw/pci-host/sabre: Update documentation link sabre: increase number of PCI bus IRQs from 32 to 64 hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter sabre: don't call sysbus_mmio_map() in sabre_realize() sparc32-ledma: don't reference nd_table directly within the device sparc32-espdma: use object_initialize_child() for esp child object sparc32-ledma: use object_initialize_child() for lance child object sparc32-dma: use object_initialize_child() for espdma and ledma child objects Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-30nbd: Add 'qemu-nbd -A' to expose allocation depthEric Blake
Allow the server to expose an additional metacontext to be requested by savvy clients. qemu-nbd adds a new option -A to expose the qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this can also be set via QMP when using block-export-add. qemu as client is hacked into viewing the key aspects of this new context by abusing the already-experimental x-dirty-bitmap option to collapse all depths greater than 2, which results in a tri-state value visible in the output of 'qemu-img map --output=json' (yes, that means x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like renaming it as it would introduce a needless break of back-compat, even though we make no compat guarantees with x- members): unallocated (depth 0) => "zero":false, "data":true local (depth 1) => "zero":false, "data":false backing (depth 2+) => "zero":true, "data":true libnbd as client is probably a nicer way to get at the information without having to decipher such hacks in qemu as client. ;) Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-11-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-10-30nbd: Add new qemu:allocation-depth metadata contextEric Blake
'qemu-img map' provides a way to determine which extents of an image come from the top layer vs. inherited from a backing chain. This is useful information worth exposing over NBD. There is a proposal to add a QMP command block-dirty-bitmap-populate which can create a dirty bitmap that reflects allocation information, at which point the qemu:dirty-bitmap:NAME metadata context can expose that information via the creation of a temporary bitmap, but we can shorten the effort by adding a new qemu:allocation-depth metadata context that does the same thing without an intermediate bitmap (this patch does not eliminate the need for that proposal, as it will have other uses as well). While documenting things, remember that although the NBD protocol has NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to 'metadata context', which is a more apt description of what is actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting metadata by passing one or more context names. So I also touched up some existing wording to prefer the term 'metadata context' where it makes sense. Note that this patch does not actually enable any way to request a server to enable this context; that will come in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-10-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-10-30block: Return depth level during bdrv_is_allocated_aboveEric Blake
When checking for allocation across a chain, it's already easy to count the depth within the chain at which the allocation is found. Instead of throwing that information away, return it to the caller. Existing callers only cared about allocated/non-allocated, but having a depth available will be used by NBD in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201027050556.269064-9-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2020-10-30nbd: Allow export of multiple bitmaps for one deviceEric Blake
With this, 'qemu-nbd -B b0 -B b1 -f qcow2 img.qcow2' can let you sniff out multiple bitmaps from one server. qemu-img as client can still only read one bitmap per client connection, but other NBD clients (hello libnbd) can now read multiple bitmaps in a single pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201027050556.269064-8-eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 08:50:06 +0000