aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-25tests/vhost-user-bridge: fix build on 32 bit systemsMichael S. Tsirkin
Mainly casts between void * and uint64_t, and wrong format for size_t. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25vring: removePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio-scsi: do not use vring in dataplanePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio-blk: do not use vring in dataplanePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio-blk: fix "disabled data plane" modePaolo Bonzini
In disabled mode, virtio-blk dataplane seems to be enabled, but flow actually goes through the normal virtio path. This patch simplifies a bit the handling of disabled mode. In disabled mode, virtio_blk_handle_output might be called even if s->dataplane is not NULL. This is a bit tricky, because the current check for s->dataplane will always trigger, causing a continuous stream of calls to virtio_blk_data_plane_start. Unfortunately, these calls will not do anything. To fix this, set the "started" flag even in disabled mode, and skip virtio_blk_data_plane_start if the started flag is true. The resulting changes also prepare the code for the next patch, were virtio-blk dataplane will reuse the same virtio_blk_handle_output function as "regular" virtio-blk. Because struct VirtIOBlockDataPlane is opaque in virtio-blk.c, we have to move s->dataplane->started inside struct VirtIOBlock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio: export vring_notify as virtio_should_notifyPaolo Bonzini
Virtio dataplane needs to trigger the irq manually through the guest notifier. Export virtio_should_notify so that it can be used around event_notifier_set. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio: add AioContext-specific function for host notifiersPaolo Bonzini
This is used to register ioeventfd with a dataplane thread. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25vring: make vring_enable_notification return voidPaolo Bonzini
Make the API more similar to the regular virtqueue API. This will help when modifying the code to not use vring.c anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25block-migration: acquire AioContext as necessaryPaolo Bonzini
This is needed because dataplane will run during block migration as well. The block device migration code is quite liberal in taking the iothread mutex. For simplicity, keep it the same way, even though one could actually choose between the BQL (for regular BlockDriverStates) and the AioContext (for dataplane BlockDriverStates). When the block layer is made fully thread safe, aio_context_acquire shall go away altogether. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2016-02-25pci core: function pci_bus_init() cleanupCao jin
remove unused param Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-02-25pci core: function pci_host_bus_register() cleanupCao jin
remove unused param, and rename the other to a meaningful one. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-02-25balloon: Use only 'pc-dimm' type dimm for ballooningVladimir Sementsov-Ogievskiy
For now there are only two dimm's: pc-dimm and nvdimm. This patch is actually needed to disable ballooning on nvdimm. But, to avoid future bugs, instead of disallowing nvdimm, we allow only pc-dimm. So, if someone adds new dimm which should be balloon-able, then this ability should be explicitly specified here. Why ballooning for nvdimm should be disabled for now: NVDIMM for now is planned to use as a backing store for DAX filesystem in the guest and thus this memory is excluded from guest memory management and LRUs. In this case libvirt running QEMU along with configured balloon almost immediately inflates balloon and effectively kill the guest as qemu counts nvdimm as part of the ram. Counting dimm devices as part of the ram for ballooning was started from commit 463756d03: virtio-balloon: Fix balloon not working correctly when hotplug memory Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25virtio-balloon: rewrite get_current_ram_size()Vladimir Sementsov-Ogievskiy
Use pc_dimm_built_list() instead of qmp_pc_dimm_device_list() Actually, Qapi is not related to this internal helper. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23move get_current_ram_size to virtio-balloon.cVladimir Sementsov-Ogievskiy
get_current_ram_size() is used only in virtio-balloon.c This patch moves it into virtio-balloon and make it static, to allow some balloon-specific tuning. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23vhost-user: don't merge regions with different fdsMichael S. Tsirkin
vhost currently merges regions with contiguious virtual and physical addresses. This breaks for vhost-user since that also needs fds to match. Add a vhost_ops entry to compare the fds for vhost-user only. Cc: qemu-stable@nongnu.org Cc: Victor Kaplansky <victork@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23bios-linker-loader: document+validate inputMichael S. Tsirkin
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c, the API was left undocumented. This adds documentation for all API functions. Additionally, input is validated to make sure all pointers fall within range of provided files. To allow this validation for checksum commands, bios_linker_loader_add_checksum is changed to accept GArray * in place of void *. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-22Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Mon 22 Feb 2016 15:59:25 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (34 commits) qemu-iotests: 140: make description slightly more verbose qemu-iotests: 140: don't use IDE device qemu-iotests: 067: ignore QMP events blockdev: unset inappropriate flags when changing medium MAINTAINERS: Add myself as maintainer of the throttling code docs: Document the throttling infrastructure qapi: Correct the name of the iops_rd parameter qemu-iotests: Extend iotest 093 to test bursts throttle: Test throttle_compute_wait() during bursts throttle: Check that burst_level leaks correctly qapi: Add burst length fields to BlockDeviceInfo qapi: Add burst length parameters to block_set_io_throttle throttle: Add command-line settings to define the burst periods throttle: Add support for burst periods throttle: Use throttle_config_init() to initialize ThrottleConfig throttle: Merge all functions that check the configuration into one throttle: Set always an average value when setting a maximum value throttle: Make throttle_is_valid() set errp throttle: Make throttle_max_is_missing_limit() set errp throttle: Make throttle_conflicting() set errp ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-22Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-02-22' ↵Kevin Wolf
into queue-block Block patches of the last three weeks. # gpg: Signature made Mon Feb 22 16:55:33 2016 CET using RSA key ID E838ACAD # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" * mreitz/tags/pull-block-for-kevin-2016-02-22: qemu-iotests: 140: make description slightly more verbose qemu-iotests: 140: don't use IDE device qemu-iotests: 067: ignore QMP events blockdev: unset inappropriate flags when changing medium Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-iotests: 140: make description slightly more verboseSascha Silbe
Describe in a little more detail what the test is supposed to achieve. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-22qemu-iotests: 140: don't use IDE deviceSascha Silbe
IDE is only implemented by very few architectures (mostly PC). The test doesn't actually need a block device attached to the BlockBackend, so just drop it and adjust the reference output accordingly. Fixes: 16dee418 ("iotests: Add test for eject under NBD server") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-22qemu-iotests: 067: ignore QMP eventsSascha Silbe
The relative ordering of "device_del" return value and the "DEVICE_DELETED" QMP event depends on the architecture being tested. On x86 unplugging virtio disks is asynchronous (=qdev_unplug()= → =hotplug_handler_unplug_request()=) while on s390x it is synchronous (=qdev_unplug()= → =hotplug_handler_unplug()=). This leads to the actual output on s390x consistently differing from the reference output (that was probably produced on x86). The easiest way to address this is to filter out QMP events in 067. The DEVICE_DELETED event is already getting explicitly tested by the Python-based test case 139, so the test coverage should be unaffected. Make use of the recently introduced _filter_qmp_events() to remove QMP events from the test case output and adjust the reference output accordingly. The tr / sed / tr trick used for filtering was suggested by Max Reitz <mreitz@redhat.com>. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1455886869-139916-2-git-send-email-silbe@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-22blockdev: unset inappropriate flags when changing mediumAlyssa Milburn
Most importantly, this removes BDRV_O_TEMPORARY, to avoid unlink()ing an image which replaces a snapshotted one. Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org> Message-id: 20160206133618.GA16635@li141-249.members.linode.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-22MAINTAINERS: Add myself as maintainer of the throttling codeAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22docs: Document the throttling infrastructureAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qapi: Correct the name of the iops_rd parameterAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-iotests: Extend iotest 093 to test burstsAlberto Garcia
This patch adds a new test that checks that the burst settings ('iops_max', 'iops_max_length', etc.) of the throttling code work as expected. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Test throttle_compute_wait() during burstsAlberto Garcia
This test simulates an I/O burst for more than two seconds and checks that it works as expected. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Check that burst_level leaks correctlyAlberto Garcia
This patch expands test_leak_bucket() to check that burst_level leaks correctly. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qapi: Add burst length fields to BlockDeviceInfoAlberto Garcia
This patch adds the new bps_*_max_length and iops_*_max_length parameters to the BlockDeviceInfo struct. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qapi: Add burst length parameters to block_set_io_throttleAlberto Garcia
This patch adds the new bps_*_max_length and iops_*_max_length parameters to the block_set_io_throttle command. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Add command-line settings to define the burst periodsAlberto Garcia
This patch adds all the throttling.*-max-length command-line parameters to define the length of the burst periods. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Add support for burst periodsAlberto Garcia
This patch adds support for burst periods to the throttling code. With this feature the user can keep performing bursts as defined by the LeakyBucket.max rate for a configurable period of time. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Use throttle_config_init() to initialize ThrottleConfigAlberto Garcia
We can currently initialize ThrottleConfig by zeroing all its fields, but this will change with the new fields to define the length of the burst periods. This patch introduces a new throttle_config_init() function and uses it to replace all memset() calls that initialize ThrottleConfig directly. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Merge all functions that check the configuration into oneAlberto Garcia
There's no need to keep throttle_conflicting(), throttle_is_valid() and throttle_max_is_missing_limit() as separate functions, so this patch merges all three into one. As a consequence, check_throttle_config() becomes redundant and can be replaced with throttle_is_valid(). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Set always an average value when setting a maximum valueAlberto Garcia
When testing the ranges of valid values, set_cfg_value() creates sometimes invalid throttling configurations by setting bucket.max while leaving bucket.avg uninitialized. While this doesn't break the current tests, it will as soon as we unify all functions that check the validity of the throttling configuration. This patch ensures that the value of bucket.avg is valid when setting bucket.max. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_is_valid() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_max_is_missing_limit() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_conflicting() set errpAlberto Garcia
The caller does not need to set it, and this will allow us to refactor this function later. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22throttle: Make throttle_compute_timer() staticAlberto Garcia
This function is only used internally in throttle.c Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20160222-1' into ↵Peter Maydell
staging gtk: fix uninitialized temporary VirtualConsole # gpg: Signature made Mon 22 Feb 2016 08:30:39 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-ui-20160222-1: gtk: fix uninitialized temporary VirtualConsole Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-22block migration: Activate image on destination before writing to itKevin Wolf
When using 'migrate -b', we must make sure to take ownership of the image before writing to it. Otherwise metadata would be thrown away on migration completion; this was caught by the assertions introduced in commit 09e0c771. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-io: use no_argument/required_argument constantsDaniel P. Berrange
When declaring the 'struct option' array, use the standard constants no_argument/required_argument, instead of magic values 0 and 1. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-nbd: use no_argument/required_argument constantsDaniel P. Berrange
When declaring the 'struct option' array, use the standard constants no_argument/required_argument, instead of magic values 0 and 1. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-nbd: don't overlap long option values with short optionsDaniel P. Berrange
When defining values for long options, the normal practice is to start numbering from 256, to avoid overlap with the range of valid values for short options. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-img: allow specifying image as a set of options argsDaniel P. Berrange
Currently qemu-img allows an image filename to be passed on the command line, but unless using the JSON format, it does not have a way to set any options except the format eg qemu-img info https://127.0.0.1/images/centos7.iso This adds a --image-opts arg that indicates that the positional filename should be interpreted as a full option string, not just a filename. qemu-img info --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off This flag is mutually exclusive with the '-f' / '-F' flags. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-nbd: allow specifying image as a set of options argsDaniel P. Berrange
Currently qemu-nbd allows an image filename to be passed on the command line, but unless using the JSON format, it does not have a way to set any options except the format eg qemu-nbd https://127.0.0.1/images/centos7.iso qemu-nbd /home/berrange/demo.qcow2 This adds a --image-opts arg that indicates that the positional filename should be interpreted as a full option string, not just a filename. qemu-nbd --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off qemu-nbd --image-opts driver=file,filename=/home/berrange/demo.qcow2 This flag is mutually exclusive with the '-f' flag. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-io: allow specifying image as a set of options argsDaniel P. Berrange
Currently qemu-io allows an image filename to be passed on the command line, but unless using the JSON format, it does not have a way to set any options except the format eg qemu-io https://127.0.0.1/images/centos7.iso qemu-io /home/berrange/demo.qcow2 By contrast when using the interactive shell, it is possible to use --option with the 'open' command, or to omit the filename. This adds a --image-opts arg that indicates that the positional filename should be interpreted as a full option string, not just a filename. qemu-io --image-opts driver=https,url=https://127.0.0.1/images,sslverify=off qemu-io --image-opts driver=qcow2,file.filename=/home/berrange/demo.qcow2 This flag is mutually exclusive with the '-f' flag and with the '-o' flag to the 'open' command Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-img: add support for --object command line argDaniel P. Berrange
Allow creation of user creatable object types with qemu-img via a new --object command line arg. This will be used to supply passwords and/or encryption keys to the various block driver backends via the recently added 'secret' object type. # printf letmein > mypasswd.txt # qemu-img info --object secret,id=sec0,file=mypasswd.txt \ ...other info args... Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22qemu-io: add support for --object command line argDaniel P. Berrange
Allow creation of user creatable object types with qemu-io via a new --object command line arg. This will be used to supply passwords and/or encryption keys to the various block driver backends via the recently added 'secret' object type. # printf letmein > mypasswd.txt # qemu-io --object secret,id=sec0,file=mypasswd.txt \ ...other args... Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22block: Fix -incoming with snapshot=onKevin Wolf
The BDRV_O_INACTIVE flag should only be set for images explicitly opened by the user. snapshot=on needs to create a new qcow2 image and write some metadata to it. This is not a problem because it can't come from the source, so there's no reason to mark it as BDRV_O_INACTIVE, even though it is opened while waiting for the migration to complete. This fixes an assertion failure when -incoming and snapshot=on are combined. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-17 13:04:29 +0000