aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-01arm/vexpress: Add proper display connector emulationLinus Walleij
This adds the SiI9022 (and implicitly EDID I2C) device to the ARM Versatile Express machine, and selects the two I2C devices necessary in the arm-softmmu.mak configuration so everything will build smoothly. I am implementing proper handling of the graphics in the Linux kernel and adding proper emulation of SiI9022 and EDID makes the driver probe as nicely as before, retrieving the resolutions supported by the "QEMU monitor" and overall just working nice. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-6-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw/sii9022: Add support for Silicon Image SII9022Linus Walleij
This adds support for emulating the Silicon Image SII9022 DVI/HDMI bridge. It's not very clever right now, it just acknowledges the switch into DDC I2C mode and back. Combining this with the existing DDC I2C emulation gives the right behavior on the Versatile Express emulation passing through the QEMU EDID to the emulated platform. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-5-linus.walleij@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: explictly reset ddc_req/ddc_skip_finish/ddc] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw/i2c-ddc: Do not fail writesLinus Walleij
The tx function of the DDC I2C slave emulation was returning 1 on all writes resulting in NACK in the I2C bus. Changing it to 0 makes the DDC I2C work fine with bit-banged I2C such as the versatile I2C. I guess it was not affecting whatever I2C controller this was used with until now, but with the Versatile I2C it surely does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-4-linus.walleij@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Move the bus class to i2c.hCorey Minyard
Some devices need access to it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-3-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Fix some brace style issuesCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-2-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commandsFrancisco Iglesias
Use 8 dummy cycles (4 dummy bytes) with the QIOR/QIOR4 commands in legacy mode for matching what is expected by Micron (Numonyx) flashes (the default target flash type of the QSPI). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-3-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01xilinx_spips: Enable only two slaves when reading/writing with stripeFrancisco Iglesias
Assert only the lower cs on bus 0 and upper cs on bus 1 when both buses and chip selects are enabled (e.g reading/writing with stripe). Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180223232233.31482-2-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01hw: register: Run post_write hook on resetAlistair Francis
Ensure that the post write hook is called during reset. This allows us to rely on the post write functions instead of having to call them from the reset() function. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: d131e24b911653a945e46ca2d8f90f572469e1dd.1517856214.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-27Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180227-pull-request' ↵Peter Maydell
into staging usb: add mtp write support. # gpg: Signature made Tue 27 Feb 2018 08:39:01 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180227-pull-request: usb-mtp: Advertise SendObjectInfo for write support usb-mtp: Introduce write support for MTP objects usb-mtp: Support delete of mtp objects usb-mtp: print parent path in IN_IGNORED trace fn usb-mtp: Add one more argument when building results Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-27Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180227-pull-request' ↵Peter Maydell
into staging virtio-gpu: add support for second capability set # gpg: Signature made Tue 27 Feb 2018 07:30:31 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180227-pull-request: virtio-gpu-3d: add support for second capability set (v4) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-27Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-2.12-pull-request' into staging # gpg: Signature made Sun 25 Feb 2018 17:54:21 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-2.12-pull-request: linux-user: MIPS set cpu to r6 CPU if binary is R6 linux-user, m68k: select CPU according to ELF header values linux-user: introduce functions to detect CPU type linux-user: Move CPU type name selection to a function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-26virtio-gpu-3d: add support for second capability set (v4)Dave Airlie
Due to a kernel bug we can never increase the size of capability set 1, so introduce a new capability set in parallel, old userspace will continue to use the old set, new userspace will start using the new one when it detects a fixed kernel. v2: don't use a define from virglrenderer, just probe it. v3: fix compilation when virglrenderer disabled v4: fix style warning, just use ?: op instead. Signed-off-by: Dave Airlie <airlied@redhat.com> Message-id: 20180223023814.24459-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Advertise SendObjectInfo for write supportBandan Das
This patch implements a dummy ObjectInfo structure so that it's easy to typecast the incoming data. If the metadata is valid, write_pending is set. Also, the incoming filename is utf-16, so, instead of depending on external libraries, just implement a simple function to get the filename Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-6-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Introduce write support for MTP objectsBandan Das
Allow write operations on behalf of the initiator. The precursor to write is the sending of the write metadata that consists of the ObjectInfo dataset. This patch introduces a flag that is set when the responder is ready to receive write data based on a previous SendObjectInfo operation by the initiator (The SendObjectInfo implementation is in a later patch) Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-5-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Support delete of mtp objectsBandan Das
Write of existing objects by the initiator is acheived by making a temporary buffer with the new changes, deleting the old file and then writing a new file with the same name. Also, add a "readonly" property which needs to be set to false for deletion to work. Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-4-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: print parent path in IN_IGNORED trace fnBandan Das
Fix a possible null dereference when deleting a folder and its contents. An ignored event might be received for its contents after the parent folder is deleted which will return a null object. Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-3-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-26usb-mtp: Add one more argument when building resultsBandan Das
The response to a SendObjectInfo consists of the storageid, parent obejct handle and the handle reserved for the new incoming object Signed-off-by: Bandan Das <bsd@redhat.com> Message-id: 20180223164829.29683-2-bsd@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-25linux-user: MIPS set cpu to r6 CPU if binary is R6YunQiang Su
So here we need to detect the version of binaries and set cpu_model for it. Signed-off-by: YunQiang Su <syq@debian.org> [lv: original patch modified to move code into cpu_get_model()] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
2018-02-25linux-user, m68k: select CPU according to ELF header valuesLaurent Vivier
M680x0 doesn't support the same set of instructions as ColdFire, so we can't use "any" CPU type to execute m68020 instructions. We select CPU type ("m68040" or "any" for ColdFire) according to the ELF header. If we can't, we use by default the value used until now: "any". Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180220173307.25125-4-laurent@vivier.eu>
2018-02-25linux-user: introduce functions to detect CPU typeYunQiang Su
Add a function to return ELF e_flags and use it to select the CPU model. Signed-off-by: YunQiang Su <syq@debian.org> [lv: split the patch and some cleanup in get_elf_eflags()] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180220173307.25125-3-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-23maintainers: Add myself as a OpenBSD maintainerBrad Smith
Add myself as an OpenBSD maintainer and add OpenBSD as maintained. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Kamil Rytarowski <n54@gmx.com> Message-id: 20180216164620.GA53727@humpty.home.comstyle.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-23Merge remote-tracking branch 'remotes/rth/tags/pull-decode-20180222' into ↵Peter Maydell
staging Add decodetree.py # gpg: Signature made Thu 22 Feb 2018 23:44:43 GMT # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-decode-20180222: scripts: Add decodetree.py Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22scripts: Add decodetree.pyRichard Henderson
To be used to decode ARM SVE, but could be used for any fixed-width ISA. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-22Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180222' into staging * New "raspi3" machine emulating RaspberryPi 3 * Fix bad register definitions for VMIDR and VMPIDR (which caused assertions for 64-bit guest CPUs with EL2 on big-endian hosts) * hw/char/stm32f2xx_usart: fix TXE/TC bit handling * Fix ast2500 protection register emulation * Lots of SD card emulation cleanups and bugfixes # gpg: Signature made Thu 22 Feb 2018 15:18:53 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180222: (32 commits) sdcard: simplify SD_SEND_OP_COND (ACMD41) sdcard: simplify SEND_IF_COND (CMD8) sdcard: warn if host uses an incorrect address for APP CMD (CMD55) sdcard: check the card is in correct state for APP CMD (CMD55) sdcard: handles more commands in SPI mode sdcard: use a more descriptive label 'unimplemented_spi_cmd' sdcard: handle the Security Specification commands sdcard: handle CMD54 (SDIO) sdcard: use the registerfields API for the CARD_STATUS register masks sdcard: use the correct masked OCR in the R3 reply sdcard: simplify using the ldst API sdcard: remove commands from unsupported old MMC specification sdcard: clean the SCR register and add few comments sdcard: fix the 'maximum data transfer rate' to 25MHz sdcard: update the CSD CRC register regardless the CSD structure version sdcard: Don't always set the high capacity bit sdcard: use the registerfields API to access the OCR register sdcard: use G_BYTE from cutils sdcard: define SDMMC_CMD_MAX instead of using the magic '64' sdcard: add more trace events ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify SD_SEND_OP_COND (ACMD41)Philippe Mathieu-Daudé
replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-17-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify SEND_IF_COND (CMD8)Philippe Mathieu-Daudé
replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-16-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: warn if host uses an incorrect address for APP CMD (CMD55)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: check the card is in correct state for APP CMD (CMD55)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-14-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handles more commands in SPI modePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-13-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use a more descriptive label 'unimplemented_spi_cmd'Philippe Mathieu-Daudé
Suggested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handle the Security Specification commandsPhilippe Mathieu-Daudé
returning sd_illegal, since they are not implemented. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-11-f4bug@amsat.org [PMM: tweak multiline comment format] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handle CMD54 (SDIO)Philippe Mathieu-Daudé
Linux uses it to poll the bus before polling for a card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the registerfields API for the CARD_STATUS register masksPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the correct masked OCR in the R3 replyPhilippe Mathieu-Daudé
use the registerfields API to access the OCR register Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify using the ldst APIPhilippe Mathieu-Daudé
the code is easier to review/refactor. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: remove commands from unsupported old MMC specificationPhilippe Mathieu-Daudé
This device does not model MMCA Specification previous to v4.2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: clean the SCR register and add few commentsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: fix the 'maximum data transfer rate' to 25MHzPhilippe Mathieu-Daudé
To comply with Spec v1.10 (and 2.00, 3.01): . TRAN_SPEED for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-4-f4bug@amsat.org [PMM: fixed comment indent] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: update the CSD CRC register regardless the CSD structure versionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: Don't always set the high capacity bitPhilippe Mathieu-Daudé
Don't set the high capacity bit by default as it will be set if required in the sd_set_csd() function. [based on a patch from Alistair Francis <alistair.francis@xilinx.com> and Peter Ogden <ogden@xilinx.com> from qemu/xilinx tag xilinx-v2015.4] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the registerfields API to access the OCR registerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use G_BYTE from cutilsPhilippe Mathieu-Daudé
code is now easier to read. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: define SDMMC_CMD_MAX instead of using the magic '64'Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: add more trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: replace fprintf() by qemu_hexdump()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: add a trace event for command responsesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180215220540.6556-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: replace DPRINTF() by trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: reorder SDState struct membersPhilippe Mathieu-Daudé
place card registers first, this will ease further code movements. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the busPhilippe Mathieu-Daudé
On reset the bus will reset the card, we can now drop the device_reset() call. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180216022933.10945-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 03:17:26 +0000