aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-14Update version for v6.0.0-rc3 releasev6.0.0-rc3Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-14qapi/qom.json: Do not use CONFIG_VIRTIO_CRYPTO in common codeThomas Huth
The ObjectType enum and ObjectOptions are included from qapi-types-qom.h into common code. We should not use target-specific config switches like CONFIG_VIRTIO_CRYPTO here, since this is not defined in common code and thus the enum will look differently between common and target specific code. For this case, it's hopefully enough to check for CONFIG_VHOST_CRYPTO only (which is a host specific config switch, i.e. it's the same on all targets). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210412160710.639800-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210413' into staging virtiofs: Fix feature negotiation (for 6.0) A 6.0 fix for feature negotiation on vhost-user. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Tue 13 Apr 2021 16:21:41 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20210413: vhost-user-fs: fix features handling Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-04-13' ↵Peter Maydell
into staging Block patches for 6.0-rc3: - Use-after-free fix for block/nbd.c # gpg: Signature made Tue 13 Apr 2021 14:35:48 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2021-04-13: block/nbd: fix possible use after free of s->connect_thread Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210413' into staging target-arm queue: * Fix MPC setting for AN524 SRAM block * sphinx: qapidoc: Wrap "If" section body in a paragraph node # gpg: Signature made Tue 13 Apr 2021 13:07:12 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210413: sphinx: qapidoc: Wrap "If" section body in a paragraph node hw/arm/mps2-tz: Assert if more than one RAM is attached to an MPC hw/arm/mps2-tz: Fix MPC setting for AN524 SRAM block Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13vhost-user-fs: fix features handlingAnton Kuchin
Make virtio-fs take into account server capabilities. Just returning requested features assumes they all of then are implemented by server and results in setting unsupported configuration if some of them are absent. Signed-off-by: Anton Kuchin <antonkuchin@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> With changes suggested by Stefan Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-13block/nbd: fix possible use after free of s->connect_threadVladimir Sementsov-Ogievskiy
If on nbd_close() we detach the thread (in nbd_co_establish_connection_cancel() thr->state becomes CONNECT_THREAD_RUNNING_DETACHED), after that point we should not use s->connect_thread (which is set to NULL), as running thread may free it at any time. Still nbd_co_establish_connection() does exactly this: it saves s->connect_thread to local variable (just for better code style) and use it even after yield point, when thread may be already detached. Fix that. Also check thr to be non-NULL on nbd_co_establish_connection() start for safety. After this patch "case CONNECT_THREAD_RUNNING_DETACHED" becomes impossible in the second switch in nbd_co_establish_connection(). Still, don't add extra abort() just before the release. If it somehow possible to reach this "case:" it won't hurt. Anyway, good refactoring of all this reconnect mess will come soon. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210406155114.1057355-1-vsementsov@virtuozzo.com> Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru> Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-04-13Merge remote-tracking branch 'remotes/philmd/tags/mips-20210413' into stagingPeter Maydell
MIPS patches queue - Fix invalid Kconfig dependency - Fix missing migrated value - Fix TCG temporary leak # gpg: Signature made Tue 13 Apr 2021 11:10:11 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/mips-20210413: target/mips: Fix TCG temporary leak in gen_cache_operation() hw/isa/piix4: Migrate Reset Control Register hw/isa/Kconfig: Add missing dependency VIA VT82C686 -> APM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210412' ↵Peter Maydell
into staging ppc patch queue for 2021-04-21 Here's what I hope is the last ppc related pull request for qemu-6.0. The 2 patches here revert a behavioural change that after further discussion we concluded was a bad idea (adding a timeout for possibly-failed hot unplug requests). Instead it implements a different approach to the original problem: we again let unplug requests the guest doesn't respond to remain pending indefinitely, but no longer allow those to block attempts to retry the same unplug again. The change is a bit more complex than I'd like for this late in the freeze. Nonetheless, I think it's important to merge this for 6.0, so we don't allow a release which has the probably-a-bad-idea timeout behaviour. # gpg: Signature made Mon 12 Apr 2021 06:25:58 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.0-20210412: spapr.c: always pulse guest IRQ in spapr_core_unplug_request() spapr: rollback 'unplug timeout' for CPU hotunplugs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13target/mips: Fix TCG temporary leak in gen_cache_operation()Philippe Mathieu-Daudé
Fix a TCG temporary leak when translating CACHE opcode. Fixes: 0d74a222c27 ("make ITC Configuration Tags accessible to the CPU") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210406202857.1440744-1-f4bug@amsat.org>
2021-04-13hw/isa/piix4: Migrate Reset Control RegisterPhilippe Mathieu-Daudé
When adding the Reset register in commit 5790b757cfb we forgot to migrate it. While it is possible a VM using the PIIX4 is migrated just after requesting a system shutdown, it is very unlikely. However when restoring a migrated VM, we might have the RCR bit #4 set on the stack and when the VM resume it directly shutdowns. Add a post_load() migration handler and set the default RCR value to 0 for earlier versions, assuming the VM was not going to shutdown before migration. Fixes: 5790b757cfb ("piix4: Add the Reset Control Register") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210324200334.729899-1-f4bug@amsat.org>
2021-04-13hw/isa/Kconfig: Add missing dependency VIA VT82C686 -> APMPhilippe Mathieu-Daudé
TYPE_VIA_PM calls apm_init() in via_pm_realize(), so requires APM to be selected. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Fixes: dd0ff8191ab ("isa: express SuperIO dependencies with Kconfig") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210302080531.913802-1-f4bug@amsat.org>
2021-04-13Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210412' ↵Peter Maydell
into staging qemu-sparc queue # gpg: Signature made Mon 12 Apr 2021 23:13:12 BST # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-20210412: tests/qtest: add tests for am53c974 device esp: ensure that do_cmd is set to zero before submitting an ESP select command esp: don't reset async_len directly in esp_select() if cancelling request esp: don't overflow cmdfifo if TC is larger than the cmdfifo size esp: don't overflow cmdfifo in get_cmd() esp: don't underflow cmdfifo in do_cmd() esp: ensure cmdfifo is not empty and current_dev is non-NULL esp: introduce esp_fifo_pop_buf() and use it instead of fifo8_pop_buf() esp: consolidate esp_cmdfifo_pop() into esp_fifo_pop() esp: consolidate esp_cmdfifo_push() into esp_fifo_push() esp: rework write_response() to avoid using the FIFO for DMA transactions esp: always check current_req is not NULL before use in DMA callbacks esp: fix setting of ESPState mig_version_id when launching QEMU with -S option Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13sphinx: qapidoc: Wrap "If" section body in a paragraph nodeJohn Snow
These sections need to be wrapped in a block-level element, such as Paragraph in order for them to be rendered into Texinfo correctly. Before (e.g.): <section ids="qapidoc-713"> <title>If</title> <literal>defined(CONFIG_REPLICATION)</literal> </section> became: .SS If \fBdefined(CONFIG_REPLICATION)\fP.SS \fBBlockdevOptionsReplication\fP (Object) ... After: <section ids="qapidoc-713"> <title>If</title> <paragraph> <literal>defined(CONFIG_REPLICATION)</literal> </paragraph> </section> becomes: .SS If .sp \fBdefined(CONFIG_REPLICATION)\fP .SS \fBBlockdevOptionsReplication\fP (Object) ... Reported-by: Markus Armbruster <armbru@redhat.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210406141909.1992225-2-jsnow@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12tests/qtest: add tests for am53c974 deviceMark Cave-Ayland
Use the autogenerated fuzzer test cases as the basis for a set of am53c974 regression tests. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: ensure that do_cmd is set to zero before submitting an ESP select commandMark Cave-Ayland
When a CDB has been received and is about to be submitted to the SCSI layer via one of the ESP select commands, ensure that do_cmd is set to zero before executing the command. Otherwise a guest executing 2 valid CDBs in quick sequence can invoke the SCSI .transfer_data callback again before do_cmd is set to zero by the callback function triggering an assert at the start of esp_transfer_data(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210407195801.685-12-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: don't reset async_len directly in esp_select() if cancelling requestMark Cave-Ayland
Instead let the SCSI layer invoke the .cancel callback itself to cancel and reset the request state. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210407195801.685-11-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: don't overflow cmdfifo if TC is larger than the cmdfifo sizeMark Cave-Ayland
If a guest transfers the message out/command phase data using DMA with a TC that is larger than the cmdfifo size then the cmdfifo overflows triggering an assert. Limit the size of the transfer to the free space available in cmdfifo. Buglink: https://bugs.launchpad.net/qemu/+bug/1919036 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-10-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: don't overflow cmdfifo in get_cmd()Mark Cave-Ayland
If the guest tries to read a CDB using DMA and cmdfifo is not empty then it is possible to overflow cmdfifo. Since this can only occur by issuing deliberately incorrect instruction sequences, ensure that the maximum length of the CDB transferred to cmdfifo is limited to the available free space within cmdfifo. Buglink: https://bugs.launchpad.net/qemu/+bug/1909247 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-9-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: don't underflow cmdfifo in do_cmd()Mark Cave-Ayland
If the guest tries to execute a CDB when cmdfifo is not empty before the start of the message out phase then clearing the message out phase data will cause cmdfifo to underflow due to cmdfifo_cdb_offset being larger than the amount of data within. Since this can only occur by issuing deliberately incorrect instruction sequences, ensure that the maximum length of esp_fifo_pop_buf() is limited to the size of the data within cmdfifo. Buglink: https://bugs.launchpad.net/qemu/+bug/1909247 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-8-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: ensure cmdfifo is not empty and current_dev is non-NULLMark Cave-Ayland
When about to execute a SCSI command, ensure that cmdfifo is not empty and current_dev is non-NULL. This can happen if the guest tries to execute a TI (Transfer Information) command without issuing one of the select commands first. Buglink: https://bugs.launchpad.net/qemu/+bug/1910723 Buglink: https://bugs.launchpad.net/qemu/+bug/1909247 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-7-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: introduce esp_fifo_pop_buf() and use it instead of fifo8_pop_buf()Mark Cave-Ayland
The const pointer returned by fifo8_pop_buf() lies directly within the array used to model the FIFO. Building with address sanitizers enabled shows that if the caller expects a minimum number of bytes present then if the FIFO is nearly full, the caller may unexpectedly access past the end of the array. Introduce esp_fifo_pop_buf() which takes a destination buffer and performs a memcpy() in it to guarantee that the caller cannot overwrite the FIFO array and update all callers to use it. Similarly add underflow protection similar to esp_fifo_push() and esp_fifo_pop() so that instead of triggering an assert() the operation becomes a no-op. Buglink: https://bugs.launchpad.net/qemu/+bug/1909247 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210407195801.685-6-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: consolidate esp_cmdfifo_pop() into esp_fifo_pop()Mark Cave-Ayland
Each FIFO currently has its own pop functions with the only difference being the capacity check. The original reason for this was that the fifo8 implementation doesn't have a formal API for retrieving the FIFO capacity, however there are multiple examples within QEMU where the capacity field is accessed directly. Change esp_fifo_pop() to access the FIFO capacity directly and then consolidate esp_cmdfifo_pop() into esp_fifo_pop(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-5-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: consolidate esp_cmdfifo_push() into esp_fifo_push()Mark Cave-Ayland
Each FIFO currently has its own push functions with the only difference being the capacity check. The original reason for this was that the fifo8 implementation doesn't have a formal API for retrieving the FIFO capacity, however there are multiple examples within QEMU where the capacity field is accessed directly. Change esp_fifo_push() to access the FIFO capacity directly and then consolidate esp_cmdfifo_push() into esp_fifo_push(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-4-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: rework write_response() to avoid using the FIFO for DMA transactionsMark Cave-Ayland
The code for write_response() has always used the FIFO to store the data for the status/message in phases, even for DMA transactions. Switch to using a separate buffer that can be used directly for DMA transactions and restrict the FIFO use to the non-DMA case. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210407195801.685-3-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: always check current_req is not NULL before use in DMA callbacksMark Cave-Ayland
After issuing a SCSI command the SCSI layer can call the SCSIBusInfo .cancel callback which resets both current_req and current_dev to NULL. If any data is left in the transfer buffer (async_len != 0) then the next TI (Transfer Information) command will attempt to reference the NULL pointer causing a segfault. Buglink: https://bugs.launchpad.net/qemu/+bug/1910723 Buglink: https://bugs.launchpad.net/qemu/+bug/1909247 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210407195801.685-2-mark.cave-ayland@ilande.co.uk>
2021-04-12esp: fix setting of ESPState mig_version_id when launching QEMU with -S optionMark Cave-Ayland
If QEMU is launched with the -S option then the ESPState mig_version_id property is left unset due to the ordering of the VMState fields in the VMStateDescription for sysbusespscsi and pciespscsi. If the VM is migrated and restored in this stopped state, the version tests in the vmstate_esp VMStateDescription and esp_post_load() become confused causing the migration to fail. Fix the ordering problem by moving the setting of mig_version_id to a common esp_pre_save() function which is invoked first by both sysbusespscsi and pciespscsi rather than at the point where ESPState is itself serialised into the migration stream. Buglink: https://bugs.launchpad.net/qemu/+bug/1922611 Fixes: 0bd005be78 ("esp: add vmstate_esp version to embedded ESPState") Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210407124842.32695-1-mark.cave-ayland@ilande.co.uk>
2021-04-12hw/arm/mps2-tz: Assert if more than one RAM is attached to an MPCPeter Maydell
Each board in mps2-tz.c specifies a RAMInfo[] array providing information about each RAM in the board. The .mpc field of the RAMInfo struct specifies which MPC, if any, the RAM is attached to. We already assert if the array doesn't have any entry for an MPC, but we don't diagnose the error of using the same MPC number twice (which is quite easy to do by accident if copy-and-pasting structure entries). Enhance find_raminfo_for_mpc() so that it detects multiple entries for the MPC as well as missing entries. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210409150527.15053-3-peter.maydell@linaro.org
2021-04-12hw/arm/mps2-tz: Fix MPC setting for AN524 SRAM blockPeter Maydell
The AN524 has three MPCs: one for the BRAM, one for the QSPI flash, and one for the DDR. We incorrectly set the .mpc field in the RAMInfo struct for the SRAM block to 1, giving it the same MPC we are using for the QSPI. The effect of this was that the QSPI didn't get mapped into the system address space at all, via an MPC or otherwise, and guest programs which tried to read from the QSPI would get a bus error. Correct the SRAM RAMInfo to indicate that it does not have an associated MPC. Fixes: 25ff112a8cc ("hw/arm/mps2-tz: Add new mps3-an524 board") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210409150527.15053-2-peter.maydell@linaro.org
2021-04-12Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210412' into staging target-arm queue: * hw/arm/virt-acpi-build: Fix GSIV values of the {GERR, Sync} interrupts * hw/arm/smmuv3: Emulate CFGI_STE_RANGE for an aligned range of StreamIDs * accel/tcg: Preserve PAGE_ANON when changing page permissions * target/arm: Check PAGE_WRITE_ORG for MTE writeability * exec: Fix overlap of PAGE_ANON and PAGE_TARGET_1 # gpg: Signature made Mon 12 Apr 2021 11:31:15 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210412: exec: Fix overlap of PAGE_ANON and PAGE_TARGET_1 target/arm: Check PAGE_WRITE_ORG for MTE writeability accel/tcg: Preserve PAGE_ANON when changing page permissions hw/arm/smmuv3: Emulate CFGI_STE_RANGE for an aligned range of StreamIDs hw/arm/virt-acpi-build: Fix GSIV values of the {GERR, Sync} interrupts Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12exec: Fix overlap of PAGE_ANON and PAGE_TARGET_1Richard Henderson
Unfortuately, the elements of PAGE_* were not in numerical order and so PAGE_ANON was added to an "unused" bit. As an arbitrary choice, move PAGE_TARGET_{1,2} together. Cc: Laurent Vivier <laurent@vivier.eu> Fixes: 26bab757d41b ("linux-user: Introduce PAGE_ANON") Buglink: https://bugs.launchpad.net/bugs/1922617 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12target/arm: Check PAGE_WRITE_ORG for MTE writeabilityRichard Henderson
We can remove PAGE_WRITE when (internally) marking a page read-only because it contains translated code. This can be triggered by tests/tcg/aarch64/bti-2, after having serviced SIGILL trampolines on the stack. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12accel/tcg: Preserve PAGE_ANON when changing page permissionsRichard Henderson
Using mprotect() to change PROT_* does not change the MAP_ANON previously set with mmap(). Our linux-user version of MTE only works with MAP_ANON pages, so losing PAGE_ANON caused MTE to stop working. Reported-by: Stephen Long <steplong@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12hw/arm/smmuv3: Emulate CFGI_STE_RANGE for an aligned range of StreamIDsZenghui Yu
In emulation of the CFGI_STE_RANGE command, we now take StreamID as the start of the invalidation range, regardless of whatever the Range is, whilst the spec clearly states that - "Invalidation is performed for an *aligned* range of 2^(Range+1) StreamIDs." - "The bottom Range+1 bits of the StreamID parameter are IGNORED, aligning the range to its size." Take CFGI_ALL (where Range == 31) as an example, if there are some random bits in the StreamID field, we'll fail to perform the full invalidation but get a strange range (e.g., SMMUSIDRange={.start=1, .end=0}) instead. Rework the emulation a bit to get rid of the discrepancy with the spec. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210402100449.528-1-yuzenghui@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12hw/arm/virt-acpi-build: Fix GSIV values of the {GERR, Sync} interruptsZenghui Yu
The GSIV values in SMMUv3 IORT node are not correct as they don't match the SMMUIrq enumeration, which describes the IRQ<->PIN mapping used by our emulated vSMMU. Fixes: a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210402084731.93-1-yuzenghui@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12Merge remote-tracking branch ↵Peter Maydell
'remotes/nvme/tags/nvme-fixes-20210412-pull-request' into staging emulated nvme docs and fixes for -rc3 - documentation - fixes # gpg: Signature made Mon 12 Apr 2021 07:56:09 BST # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * remotes/nvme/tags/nvme-fixes-20210412-pull-request: hw/block/nvme: drain namespaces on sq deletion hw/block/nvme: store aiocb in compare hw/block/nvme: map prp fix if prp2 contains non-zero offset docs: add nvme emulation documentation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12hw/block/nvme: drain namespaces on sq deletionKlaus Jensen
For most commands, when issuing an AIO, the BlockAIOCB is stored in the NvmeRequest aiocb pointer when the AIO is issued. The main use of this is cancelling AIOs when deleting submission queues (it is currently not used for Abort). However, some commands like Dataset Management Zone Management Send (zone reset) may involve more than one AIO and here the AIOs are issued without saving a reference to the BlockAIOCB. This is a problem since nvme_del_sq() will attempt to cancel outstanding AIOs, potentially with an invalid BlockAIOCB since the aiocb pointer is not NULL'ed when the request structure is recycled. Fix this by 1. making sure the aiocb pointer is NULL'ed when requests are recycled 2. only attempt to cancel the AIO if the aiocb is non-NULL 3. if any AIOs could not be cancelled, drain all aio as a last resort. Fixes: dc04d25e2f3f ("hw/block/nvme: add support for the format nvm command") Fixes: c94973288cd9 ("hw/block/nvme: add broadcast nsid support flush command") Fixes: e4e430b3d6ba ("hw/block/nvme: add simple copy command") Fixes: 5f5dc4c6a942 ("hw/block/nvme: zero out zones on reset") Fixes: 2605257a26b8 ("hw/block/nvme: add the dataset management command") Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com> Cc: Minwoo Im <minwoo.im@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2021-04-12hw/block/nvme: store aiocb in compareKlaus Jensen
nvme_compare() fails to store the aiocb from the blk_aio_preadv() call. Fix this. Fixes: 0a384f923f51 ("hw/block/nvme: add compare command") Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2021-04-12hw/block/nvme: map prp fix if prp2 contains non-zero offsetPadmakar Kalghatgi
nvme_map_prp needs to calculate the number of list entries based on the offset value. For the subsequent PRP2 list, need to ensure the number of entries is within the MAX number of PRP entries for a page. Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-04-12docs: add nvme emulation documentationKlaus Jensen
Remove the docs/specs/nvme.txt and replace it with proper documentation in docs/system/nvme.rst. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-04-12spapr.c: always pulse guest IRQ in spapr_core_unplug_request()Daniel Henrique Barboza
Commit 47c8c915b162 fixed a problem where multiple spapr_drc_detach() requests were breaking QEMU. The solution was to just spapr_drc_detach() once, and use spapr_drc_unplug_requested() to filter whether we already detached it or not. The commit also tied the hotplug request to the guest in the same condition. Turns out that there is a reliable way for a CPU hotunplug to fail. If a guest with one CPU hotplugs a CPU1, then offline CPU0s via 'echo 0 > /sys/devices/system/cpu/cpu0/online', then attempts to hotunplug CPU1, the kernel will refuse it because it's the last online CPU of the system. Given that we're pulsing the IRQ only in the first try, in a failed attempt, all other CPU1 hotunplug attempts will fail, regardless of the online state of CPU1 in the kernel, because we're simply not letting the guest know that we want to hotunplug the device. Let's move spapr_hotplug_req_remove_by_index() back out of the "if (!spapr_drc_unplug_requested(drc))" conditional, allowing for multiple 'device_del' requests to the same CPU core to reach the guest, in case the CPU core didn't fully hotunplugged previously. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210401000437.131140-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-12spapr: rollback 'unplug timeout' for CPU hotunplugsDaniel Henrique Barboza
The pseries machines introduced the concept of 'unplug timeout' for CPU hotunplugs. The idea was to circunvent a deficiency in the pSeries specification (PAPR), that currently does not define a proper way for the hotunplug to fail. If the guest refuses to release the CPU (see [1] for an example) there is no way for QEMU to detect the failure. Further discussions about how to send a QAPI event to inform about the hotunplug timeout [2] exposed problems that weren't predicted back when the idea was developed. Other QEMU machines don't have any type of hotunplug timeout mechanism for any device, e.g. ACPI based machines have a way to make hotunplug errors visible to the hypervisor. This would make this timeout mechanism exclusive to pSeries, which is not ideal. The real problem is that a QAPI event that reports hotunplug timeouts puts the management layer (namely Libvirt) in a weird spot. We're not telling that the hotunplug failed, because we can't be 100% sure of that, and yet we're resetting the unplug state back, preventing any DEVICE_DEL events to reach out in case the guest decides to release the device. Libvirt would need to inspect the guest itself to see if the device was released or not, otherwise the internal domain states will be inconsistent. Moreover, Libvirt already has an 'unplug timeout' concept, and a QEMU side timeout would need to be juggled together with the existing Libvirt timeout. All this considered, this solution ended up creating more trouble than it solved. This patch reverts the 3 commits that introduced the timeout mechanism for CPU hotplugs in pSeries machines. This reverts commit 4515a5f786024fabf0bef4cf3d28adf5647e6e82 "qemu_timer.c: add timer_deadline_ms() helper" This reverts commit d1c2e3ce3d5a5424651967bce1cf1f4caa0c6d91 "spapr_drc.c: add hotunplug timeout for CPUs" This reverts commit 51254ffb320183a4636635840c23ee0e3a1efffa "spapr_drc.c: introduce unplug_timeout_timer" [1] https://bugzilla.redhat.com/show_bug.cgi?id=1911414 [2] https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg04682.html CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210401000437.131140-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-10Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost-gl/tags/x86-next-pull-request' into staging x86 and CPU bug fixes for 6.0-rc3 * Add missing features to EPYC-Rome CPU model (Babu Moger) * Fix crash with "-device ...-cpu-core,help" (Greg Kurz) # gpg: Signature made Fri 09 Apr 2021 21:20:18 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost-gl/tags/x86-next-pull-request: cpu/core: Fix "help" of CPU core device types i386: Add missing cpu feature bits in EPYC-Rome model Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-09cpu/core: Fix "help" of CPU core device typesGreg Kurz
Calling qdev_get_machine() from a QOM instance_init function is fragile because we can't be sure the machine object actually exists. And this happens to break when passing ",help" on the command line to get the list of properties for a CPU core device types : $ ./qemu-system-ppc64 -device power8_v2.0-spapr-cpu-core,help qemu-system-ppc64: ../../hw/core/machine.c:1290: qdev_get_machine: Assertion `machine != NULL' failed. Aborted (core dumped) This used to work before QEMU 5.0, but commit 3df261b6676b unwillingly introduced a subtle regression : the above command line needs to create an instance but the instance_init function of the base class calls qdev_get_machine() before qemu_create_machine() has been called, which is a programming bug. Use current_machine instead. It is okay to skip the setting of nr_thread in this case since only its type is displayed. Fixes: 3df261b6676b ("softmmu/vl.c: Handle '-cpu help' and '-device help' before 'no default machine'") Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Cc: peter.maydell@linaro.org Message-Id: <20210409160339.500167-3-groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-04-09i386: Add missing cpu feature bits in EPYC-Rome modelBabu Moger
Found the following cpu feature bits missing from EPYC-Rome model. ibrs : Indirect Branch Restricted Speculation ssbd : Speculative Store Bypass Disable These new features will be added in EPYC-Rome-v2. The -cpu help output after the change. x86 EPYC-Rome (alias configured by machine type) x86 EPYC-Rome-v1 AMD EPYC-Rome Processor x86 EPYC-Rome-v2 AMD EPYC-Rome Processor Reported-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <161478622280.16275.6399866734509127420.stgit@bmoger-ubuntu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-04-09Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer fixes - mirror: Fix job-complete race condition causing unexpected errors - fdc: Fix 'fallback' property on sysbus floppy disk controllers - rbd: Fix memory leaks - iotest improvements # gpg: Signature made Fri 09 Apr 2021 17:13:11 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: test-blockjob: Test job_wait_unpaused() job: Allow complete for jobs on standby mirror: Do not enter a paused job on completion mirror: Move open_backing_file to exit_common hw/block/fdc: Fix 'fallback' property on sysbus floppy disk controllers iotests: Test mirror-top filter permissions iotests: add test for removing persistent bitmap from backing file iotests/qsd-jobs: Filter events in the first test block/rbd: fix memory leak in qemu_rbd_co_create_opts() block/rbd: fix memory leak in qemu_rbd_connect() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-09Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210409' ↵Peter Maydell
into staging One s390x fix: - correctly handle the case where the guest ccw payload points to invalid memory areas # gpg: Signature made Fri 09 Apr 2021 15:43:45 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck-gitlab/tags/s390x-20210409: s390x: css: report errors from ccw_dstream_read/write Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-09test-blockjob: Test job_wait_unpaused()Max Reitz
Create a job that remains on STANDBY after a drained section, and see that invoking job_wait_unpaused() will get it unstuck. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210409120422.144040-5-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-09job: Allow complete for jobs on standbyMax Reitz
The only job that implements .complete is the mirror job, and it can handle completion requests just fine while the job is paused. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1945635 Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210409120422.144040-4-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-09mirror: Do not enter a paused job on completionMax Reitz
Currently, it is impossible to complete jobs on standby (i.e. paused ready jobs), but actually the only thing in mirror_complete() that does not work quite well with a paused job is the job_enter() at the end. If we make it conditional, this function works just fine even if the mirror job is paused. So technically this is a no-op, but obviously the intention is to accept block-job-complete even for jobs on standby, which we need this patch for first. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210409120422.144040-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-21 22:16:47 +0000