aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-09tcg: Change reg_to_temp to TCGTemp pointerRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove tcg_get_arg_str_i32/64Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: More use of TCGReg where appropriateRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Work around clang bug wrt enum rangesRichard Henderson
A subsequent patch patch will change the type of REG from int to enum TCGReg, which provokes the following bug in clang: https://llvm.org/bugs/show_bug.cgi?id=16154 Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Tidy temporary allocationRichard Henderson
In particular, make sure the memory is memset before use. Continues the increased use of TCGTemp pointers instead of integer indices where appropriate. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change ts->mem_reg to ts->mem_baseRichard Henderson
Chain the temporaries together via pointers intstead of indices. The mem_reg value is now mem_base->reg. This will be important later. This does require that the frame pointer have a global temporary allocated for it. This is simple bar the existing reserved_regs check. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove lingering references to gen_opc_bufRichard Henderson
Three in comments and one in code in the stub tcg_liveness_analysis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Respect highwater in tcg_out_tb_finalizeRichard Henderson
Undo the workaround at b17a6d3390f87620735f7efb03bb1c96682ff449. If there are lots of memory operations in a TB, the slow path code can exceed the highwater reservation. Add a check within the loop. Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-08ui/cocoa.m: Include qemu/osdep.hPeter Maydell
Include "qemu/osdep.h". (This is a manual commit equivalent to what the clean-includes script would do, because that script can't handle ObjectiveC source files.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454084614-5365-1-git-send-email-peter.maydell@linaro.org
2016-02-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc and misc cleanups and fixes, virtio optimizations Included here: Refactoring and bugfix patches in PC/ACPI. New commands for ipmi. Virtio optimizations. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sat 06 Feb 2016 18:44:26 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (45 commits) net: set endianness on all backend devices fix MSI injection on Xen intel_iommu: large page support dimm: Correct type of MemoryHotplugState->base pc: set the OEM fields in the RSDT and the FADT from the SLIC acpi: add function to extract oem_id and oem_table_id from the user's SLIC acpi: expose oem_id and oem_table_id in build_rsdt() acpi: take oem_id in build_header(), optionally pc: Eliminate PcGuestInfo struct pc: Move APIC and NUMA data from PcGuestInfo to PCMachineState pc: Move PcGuestInfo.fw_cfg to PCMachineState pc: Remove PcGuestInfo.isapc_ram_fw field pc: Remove RAM size fields from PcGuestInfo pc: Remove compat fields from PcGuestInfo acpi: Don't save PcGuestInfo on AcpiBuildState acpi: Remove guest_info parameters from functions pc: Simplify xen_load_linux() signature pc: Simplify pc_memory_init() signature pc: Eliminate struct PcGuestInfoState pc: Move PcGuestInfo declaration to top of file ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-06net: set endianness on all backend devicesLaurent Vivier
commit 5be7d9f1b1452613b95c6ba70b8d7ad3d0797991 vhost-net: tell tap backend about the vnet endianness makes vhost net to set the endianness of the device, but only for the first device. In case of multiqueue, we have multiple devices... This patch sets the endianness for all the devices of the interface. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2016-02-06fix MSI injection on XenStefano Stabellini
On Xen MSIs can be remapped into pirqs, which are a type of event channels. It's mostly for the benefit of PCI passthrough devices, to avoid the overhead of interacting with the emulated lapic. However remapping interrupts and MSIs is also supported for emulated devices, such as the e1000 and virtio-net. When an interrupt or an MSI is remapped into a pirq, masking and unmasking is done by masking and unmasking the event channel. The masking bit on the PCI config space or MSI-X table should be ignored, but it isn't at the moment. As a consequence emulated devices which use MSI or MSI-X, such as virtio-net, don't work properly (the guest doesn't receive any notifications). The mechanism was working properly when xen_apic was introduced, but I haven't narrowed down which commit in particular is causing the regression. Fix the issue by ignoring the masking bit for MSI and MSI-X which have been remapped into pirqs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06intel_iommu: large page supportJason Wang
Current intel_iommu only supports 4K page which may not be sufficient to cover guest working set. This patch tries to enable 2M and 1G mapping for intel_iommu. This is also useful for future device IOTLB implementation to have a better hit rate. Major work is adding a page mask field on IOTLB entry to make it support large page. And also use the slpte level as key to do IOTLB lookup. MAMV was increased to 18 to support direct invalidation for 1G mapping. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06dimm: Correct type of MemoryHotplugState->baseDavid Gibson
The 'base' field of MemoryHotplugState is ram_addr_t, which indicates that it exists in the abstract address space of RAM regions. However, the actual usage of this field indicates that it is a concrete physical address (it's passed as an offset to memory_region_add_subgregion for example). So, correct its type to 'hwaddr'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2016-02-06pc: set the OEM fields in the RSDT and the FADT from the SLICLaszlo Ersek
The Microsoft spec about the SLIC and MSDM ACPI tables at <http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT. That further affects the FADT, because a similar match between the FADT and the RSDT/XSDT is required by the ACPI spec in general. This patch wires up the previous three patches. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
2016-02-06acpi: add function to extract oem_id and oem_table_id from the user's SLICLaszlo Ersek
The acpi_get_slic_oem() function stores pointers to these fields in the (first) SLIC table that the user passes in with the -acpitable switch. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
2016-02-06acpi: expose oem_id and oem_table_id in build_rsdt()Laszlo Ersek
Since build_rsdt() is implemented as common utility code (in "hw/acpi/aml-build.c"), it should expose -- and forward -- the oem_id and oem_table_id parameters between board code and the generic build_header() function. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-02-06acpi: take oem_id in build_header(), optionallyLaszlo Ersek
This patch is the continuation of commit 8870ca0e94f2 ("acpi: support specified oem table id for build_header"). It will allow us to control the OEM ID field too in the SDT header. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> (maintainer:NVDIMM) Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-02-06pc: Eliminate PcGuestInfo structEduardo Habkost
The struct is not used for anything, now. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06pc: Move APIC and NUMA data from PcGuestInfo to PCMachineStateEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Move PcGuestInfo.fw_cfg to PCMachineStateEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove PcGuestInfo.isapc_ram_fw fieldEduardo Habkost
The code can use the PCMachineClass.pci_enabled field directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove RAM size fields from PcGuestInfoEduardo Habkost
The ACPI code can use the PCMachineState fields directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Remove compat fields from PcGuestInfoEduardo Habkost
Remove the fields: legacy_acpi_table_size, has_acpi_build, has_reserved_memory, and rsdp_in_ram from PcGuestInfo, and let the existing code use the PCMachineClass fields directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06acpi: Don't save PcGuestInfo on AcpiBuildStateEduardo Habkost
We don't need to save the pointer on AcpiBuildState, as it is not used anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06acpi: Remove guest_info parameters from functionsEduardo Habkost
We can use PC_MACHINE(qdev_get_machine())->acpi_guest_info to get guest_info. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06pc: Simplify xen_load_linux() signatureEduardo Habkost
We can get the PcGuestInfo struct directly from PCMachineState, and the return value is not needed at all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Simplify pc_memory_init() signatureEduardo Habkost
We can get the PcGuestInfo struct directly from PCMachineState, and the return value is not needed at all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Eliminate struct PcGuestInfoStateEduardo Habkost
Instead of allocating a new struct just for PcGuestInfo and the mchine_done Notifier, place them inside PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06pc: Move PcGuestInfo declaration to top of fileEduardo Habkost
The struct will be used inside PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-06ipmi: add ACPI power and GUID commandsCédric Le Goater
>From the specs (20.8 Get Device GUID Command), the command needs to return a GUID (Globally Unique ID), or UUID, that should never change over the lifetime of the device. qemu_uuid looked like a good candidate to start with but we could use a specific BMC property also if needed. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: add GET_SYS_RESTART_CAUSE chassis commandCédric Le Goater
This is a simulator. Just return an unknown cause (0). Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: add get and set SENSOR_TYPE commandsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: introduce a struct ipmi_sdr_compactCédric Le Goater
Currently, sdr attributes are identified using byte offsets and this can be a bit confusing. This patch adds a struct ipmi_sdr_compact conforming to the IPMI specs and replaces byte offsets with names. It also introduces and uses a struct ipmi_sdr_header in sections of the code where no assumption is made on the type of SDR. This leave rooms to potential usage of other types in the future. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: fix SDR length valueCédric Le Goater
The IPMI BMC simulator populates the SDR table with a set of initial SDRs. The length of each SDR is taken from the record itself (byte 4) which does not include the size of the header. But, the full length (header + data) is required by the sdr_add_entry() routine. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: cleanup error_report messagesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: replace *_MAXCMD definesCédric Le Goater
ARRAY_SIZE() is simple to use and removes the need to pre-define the size of the command arrays. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06ipmi: replace goto by a return statementCédric Le Goater
Each routine using the IPMI_ADD_RSP_DATA, IPMI_CHECK_CMD_LEN or IPMI_CHECK_RESERVATION macros needs to define a goto label 'out' to handle hidden errors. Using directly a return statement has the same effect and it removes the fact that 'out' needs to be defined. The code exits in ipmi_sim_handle_command() are a little different from the rest and a "possible" error in the macro IPMI_ADD_RSP_DATA is handled before making use of it. This might be a bit excessive as a minimum response len is currently 300 bytes and the patch checks that at least 3 are available. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06hw/pci: ensure that only PCI/PCIe bridges can be attached to pxb/pxb-pcie ↵Marcel Apfelbaum
devices PCI devices can't be plugged directly into PCI extra root bridges because their resources can't be computed by firmware before the ACPI tables are loaded. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06vhost-user-test: use correct ROM to speed up and avoid spurious failuresPaolo Bonzini
The mechanism to get the option ROM for virtio-net does not block the PCI ROM from being loaded. Therefore, in vhost-user-test there are two entries in the boot menu for the virtio-net card: one as an embedded option ROM, one from the ROM BAR. The embedded option ROM in vhost-user-test is the non-EFI-enabled, while the ROM BAR has an EFI-enabled ROM. The two are compiled with slightly different parameters, where only the old BIOS-only one doesn't have a timeout for the "Press Ctrl-B" banner. When using a new machine type, therefore, the vhost-user-test has to wait for the EFI-enabled ROM's banner to go away. There are several ways to fix this: 1) fix the ROMs to have the same configuration 2) add ",romfile=" to the -device line 3) remove --option-rom and add the ROM file name to the -device line 4) use an old machine type This patch chooses 3. In addition, the file name was wrong because qtest runs QEMU relative to the top build directory, not to the x86_64-softmmu/ subdirectory, which is fixed too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06hw/pxb: add pxb devices to the bridge categoryMarcel Apfelbaum
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: combine write of an entry into used ringVincenzo Maffione
Fill in an element of the used ring with a single combined access to the guest physical memory, rather than using two separated accesses. This reduces the overhead due to expensive address translation. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Message-Id: <e4a89a767a4a92cbb6bcc551e151487eb36e1722.1450218353.git.v.maffione@gmail.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: read avail_idx from VQ only when necessaryVincenzo Maffione
The virtqueue_pop() implementation needs to check if the avail ring contains some pending buffers. To perform this check, it is not always necessary to fetch the avail_idx in the VQ memory, which is expensive. This patch introduces a shadow variable tracking avail_idx and modifies virtio_queue_empty() to access avail_idx in physical memory only when necessary. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Message-Id: <b617d6459902773d9f4ab843bfaca764f5af8eda.1450218353.git.v.maffione@gmail.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: cache used_idx in a VirtQueue fieldVincenzo Maffione
Accessing used_idx in the VQ requires an expensive access to guest physical memory. Before this patch, 3 accesses are normally done for each pop/push/notify call. However, since the used_idx is only written by us, we can track it in our internal data structure. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Message-Id: <3d062ec54e9a7bf9fb325c1fd693564951f2b319.1450218353.git.v.maffione@gmail.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: combine the read of a descriptorPaolo Bonzini
Compared to vring, virtio has a performance penalty of 10%. Fix it by combining all the reads for a descriptor in a single address_space_read call. This also simplifies the code nicely. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06vring: slim down allocation of VirtQueueElementsPaolo Bonzini
Build the addresses and s/g lists on the stack, and then copy them to a VirtQueueElement that is just as big as required to contain this particular s/g list. The cost of the copy is minimal compared to that of a large malloc. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: slim down allocation of VirtQueueElementsPaolo Bonzini
Build the addresses and s/g lists on the stack, and then copy them to a VirtQueueElement that is just as big as required to contain this particular s/g list. The cost of the copy is minimal compared to that of a large malloc. When virtqueue_map is used on the destination side of migration or on loadvm, the iovecs have already been split at memory region boundary, so we can just reuse the out_num/in_num we find in the file. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: introduce virtqueue_alloc_elementPaolo Bonzini
Allocate the arrays for in_addr/out_addr/in_sg/out_sg outside the VirtQueueElement. For now, virtqueue_pop and vring_pop keep allocating a very large VirtQueueElement. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-06virtio: introduce qemu_get/put_virtqueue_elementPaolo Bonzini
Move allocation to virtio functions also when loading/saving a VirtQueueElement. This will also let the load/save functions keep backwards compatibility when the VirtQueueElement layout is changed. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 10:09:11 +0000