aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-07linux-user: Block signals during sigaction() handlingTimothy E Baldwin
Block signals while emulating sigaction. This is a non-interruptible syscall, and using block_signals() avoids races where the host signal handler is invoked and tries to examine the signal handler data structures while we are updating them. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-29-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Queue synchronous signals separatelyTimothy E Baldwin
If a synchronous signal and an asynchronous signal arrive near simultaneously, and the signal number of the asynchronous signal is lower than that of the synchronous signal the the handler for the asynchronous would be called first, and then the handler for the synchronous signal would be called within or after the first handler with an incorrect context. This is fixed by queuing synchronous signals separately. Note that this does risk delaying a asynchronous signal until the synchronous signal handler returns rather than handling the signal on another thread, but this seems unlikely to cause problems for real guest programs and is unavoidable unless we could guarantee to roll back and reexecute whatever guest instruction caused the synchronous signal (which would be a bit odd if we've already logged its execution, for instance, and would require careful analysis of all guest CPUs to check it was possible in all cases). Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-24-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: added a comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Remove real-time signal queuingTimothy E Baldwin
As host signals are now blocked whenever guest signals are blocked, the queue of realtime signals is now in Linux. The QEMU queue is now redundant and can be removed. (We already did not queue non-RT signals, and none of the calls to queue_signal() except the one in host_signal_handler() pass an RT signal number.) Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-23-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: minor commit message tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Remove redundant gdb_queuesig()Timothy E Baldwin
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-22-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Remove redundant default action check in queue_signal()Timothy E Baldwin
Both queue_signal() and process_pending_signals() did check for default actions of signals, this is redundant and also causes fatal and stopping signals to incorrectly cause guest system calls to be interrupted. The code in queue_signal() is removed. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-21-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Fix race between multiple signalsPeter Maydell
If multiple host signals are received in quick succession they would be queued in TaskState then delivered to the guest in spite of signals being supposed to be blocked by the guest signal handler's sa_mask. Fix this by decoupling the guest signal mask from the host signal mask, so we can have protected sections where all host signals are blocked. In particular we block signals from when host_signal_handler() queues a signal from the guest until process_pending_signals() has unqueued it. We also block signals while we are manipulating the guest signal mask in emulation of sigprocmask and similar syscalls. Blocking host signals also ensures the correct behaviour with respect to multiple threads and the overrun count of timer related signals. Alas blocking and queuing in qemu is still needed because of virtual processor exceptions, SIGSEGV and SIGBUS. Blocking signals inside process_pending_signals() protects against concurrency problems that would otherwise happen if host_signal_handler() ran and accessed the signal data structures while process_pending_signals() was manipulating them. Since we now track the guest signal mask separately from that of the host, the sigsuspend system calls must track the signal mask passed to them, because when we process signals as we leave the sigsuspend the guest signal mask in force is that passed to sigsuspend. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-19-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: make signal_pending a simple flag rather than a word with two flag bits; ensure we don't call block_signals() twice in sigreturn codepaths; document and assert() the guarantee that using do_sigprocmask() to get the current mask never fails; use the qemu atomics.h functions rather than raw volatile variable access; add extra commentary and documentation; block SIGSEGV/SIGBUS in block_signals() and in process_pending_signals() because they can't occur synchronously here; check the right do_sigprocmask() call for errors in ssetmask syscall; expand commit message; fixed sigsuspend() hanging] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Use safe_syscall for sigsuspend syscallsPeter Maydell
Use the safe_syscall wrapper for sigsuspend syscalls. This means that we will definitely deliver a signal that arrives before we do the sigsuspend call, rather than blocking first and delivering afterwards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Define macro for size of host kernel sigset_tPeter Maydell
Some host syscalls take an argument specifying the size of a host kernel's sigset_t (which isn't necessarily the same as that of the host libc's type of that name). Instead of hardcoding _NSIG / 8 where we do this, define and use a SIGSET_T_SIZE macro. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Factor out uses of do_sigprocmask() from sigreturn codePeter Maydell
All the architecture specific handlers for sigreturn include calls to do_sigprocmask(SIGSETMASK, &set, NULL) to set the signal mask from the uc_sigmask in the context being restored. Factor these out into calls to a set_sigmask() function. The next patch will want to add code which is not run when setting the signal mask via do_sigreturn, and this change allows us to separate the two cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Fix stray tab-indentPeter Maydell
Fix a stray tab-indented linux in linux-user/signal.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Move handle_pending_signal() to avoid need for declarationPeter Maydell
Move the handle_pending_signal() function above process_pending_signals() to avoid the need for a forward declaration. (Whitespace only change.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Factor out handle_signal code from process_pending_signals()Peter Maydell
Factor out the code to handle a single signal from the process_pending_signals() function. The use of goto for flow control is OK currently, but would get significantly uglier if extended to allow running the handle_signal code multiple times. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: check if NETLINK_ROUTE is availableLaurent Vivier
Some IFLA_* symbols can be missing in the host linux/if_link.h, but as they are enums and not "#defines", check in "configure" if last known (IFLA_PROTO_DOWN) is available and if not, disable management of NETLINK_ROUTE protocol. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: add netlink auditLaurent Vivier
This is, for instance, needed to log in a container. Without this, the user cannot be identified and the console login fails with "Login incorrect". Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: support netlink protocol NETLINK_KOBJECT_UEVENTLaurent Vivier
This is the protocol used by udevd to manage kernel events. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: add rtnetlink(7) supportLaurent Vivier
rtnetlink is needed to use iproute package (ip addr, ip route) and dhcp client. Examples: Without this patch: # ip link Cannot open netlink socket: Address family not supported by protocol # ip addr Cannot open netlink socket: Address family not supported by protocol # ip route Cannot open netlink socket: Address family not supported by protocol # dhclient eth0 Cannot open netlink socket: Address family not supported by protocol Cannot open netlink socket: Address family not supported by protocol With this patch: # ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000 link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff # ip addr show eth0 51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000 link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::216:3eff:fe89:6bd7/64 scope link valid_lft forever preferred_lft forever # ip route default via 192.168.122.1 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.197 # ip addr flush eth0 # ip addr add 192.168.122.10 dev eth0 # ip addr show eth0 51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000 link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.122.10/32 scope global eth0 valid_lft forever preferred_lft forever # ip route add 192.168.122.0/24 via 192.168.122.10 # ip route 192.168.122.0/24 via 192.168.122.10 dev eth0 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07linux-user: Fix qemu-binfmt-conf.sh to store config across rebootLaurent Vivier
Original qemu-binfmt-conf.sh is only able to write configuration into /proc/sys/fs/binfmt_misc, and the configuration is lost on reboot. This script can configure debian and systemd services to restore configuration on reboot. Moreover, it is able to manage binfmt credential and to configure the path of the interpreter. List of supported CPU is: i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le m68k mips mipsel mipsn32 mipsn32el mips64 mips64el sh4 sh4eb s390x aarch64 Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU] [--help][--credential yes|no][--exportdir PATH] Configure binfmt_misc to use qemu interpreter --help: display this usage --qemu-path: set path to qemu interpreter (/usr/local/bin) --debian: don't write into /proc, instead generate update-binfmts templates --systemd: don't write into /proc, instead generate file for systemd-binfmt.service for the given CPU --exportdir: define where to write configuration files (default: /etc/binfmt.d or /usr/share/binfmts) --credential: if yes, credential an security tokens are calculated according to the binary to interpret To import templates with update-binfmts, use : sudo update-binfmts --importdir /usr/share/binfmts --import qemu-CPU To remove interpreter, use : sudo update-binfmts --package qemu-CPU --remove qemu-CPU /usr/local/bin With systemd, binfmt files are loaded by systemd-binfmt.service The environment variable HOST_ARCH allows to override 'uname' to generate configuration files for a different architecture than the current one. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-06Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20160606-1' into staging target-arm queue: * support instruction syndrome info for data aborts from A64 to EL2 * add HSTR_EL2 register * fix incorrect ESR IL bits in various syndrome register cases * virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range * gicv2: RAZ/WI non-sec access to sec interrupts * i2c: add aspeed i2c controller * virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host) * xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions * xlnx-zynqmp: Support KVM on AArch64 hosts * ptimer: Various fixes for awkward corner cases * char: QOMify various ARM UART models * char: get rid of qemu_char_get_next_serial * target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation * zynqmp: Add the ZCU102 board # gpg: Signature made Mon 06 Jun 2016 17:01:11 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20160606-1: (25 commits) zynqmp: Add the ZCU102 board target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation char: get rid of qemu_char_get_next_serial hw/char: QOM'ify xilinx_uartlite model hw/char: QOM'ify stm32f2xx_usart model hw/char: QOM'ify digic-uart model hw/char: QOM'ify cadence_uart model hw/char: QOM'ify pl011 model hw/ptimer: Introduce ptimer_get_limit hw/ptimer: Support "on the fly" timer mode switch hw/ptimer: Update .delta on period/freq change hw/ptimer: Perform counter wrap around if timer already expired hw/ptimer: Fix issues caused by the adjusted timer limit value xlnx-zynqmp: Use the in kernel GIC model for KVM runs xlnx-zynqmp: Delay realization of GIC until post CPU realization xlnx-zynqmp: Make the RPU subsystem optional xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions hw/arm/virt: Reject gic-version=host for non-KVM i2c: add aspeed i2c controller hw/intc/gic: RAZ/WI non-sec access to sec interrupts ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06zynqmp: Add the ZCU102 boardAlistair Francis
Most Zynq UltraScale+ users will be targetting and using the ZCU102 board instead of the development focused EP108. To make our QEMU machine names clearer add a ZCU102 machine model. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: cc82eec026b2febfca252d73362bb7084616c1ad.1464213234.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translationSergey Sorokin
Address size is 40-bit for the AArch32 stage 2 translation, and t0sz can be negative (from -8 to 7), so we need to adjust it to use the existing TTBR selecting logic. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06char: get rid of qemu_char_get_next_serialxiaoqiang zhao
since there is no user of qemu_char_get_next_serial any more, it's time to let it go away. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-7-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify xilinx_uartlite modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * create xilinx_uartlite_create wrapper function to create xilinx_uartlite device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify stm32f2xx_usart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify digic-uart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify cadence_uart modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * create cadence_uart_create wrapper function to create cadence_uart_device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/char: QOM'ify pl011 modelxiaoqiang zhao
* drop qemu_char_get_next_serial and use chardev prop * add pl011_create wrapper function to create pl011 uart device * change affected board code to use the new way Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/ptimer: Introduce ptimer_get_limitDmitry Osipenko
Currently ptimer users are used to store copy of the limit value, because ptimer doesn't provide facility to retrieve the limit. Let's provide it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 8f1fa9f90d8dbf8086fb02f3b4835eaeb4089cf6.1464367869.git.digetx@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/ptimer: Support "on the fly" timer mode switchDmitry Osipenko
Allow switching between periodic <-> oneshot modes while timer is running. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: f030be6e28fbd219e1e8d22297aee367bd9af5bb.1464367869.git.digetx@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/ptimer: Update .delta on period/freq changeDmitry Osipenko
Delta value must be updated on period/freq change, otherwise running timer would be restarted (counter reloaded with old delta). Only m68k/mcf520x and arm/arm_timer devices are currently doing freq change correctly, i.e. stopping the timer. Perform delta update to fix affected devices and eliminate potential further mistakes. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/ptimer: Perform counter wrap around if timer already expiredDmitry Osipenko
ptimer_get_count() might be called while QEMU timer already been expired. In that case ptimer would return counter = 0, which might be undesirable in case of polled timer. Do counter wrap around for periodic timer to keep it distributed. In order to achieve more accurate emulation behaviour of certain hardware, don't perform wrap around when in icount mode and return counter = 0 in that case (that doesn't affect polled counter distribution). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/ptimer: Fix issues caused by the adjusted timer limit valueDmitry Osipenko
Multiple issues here related to the timer with a adjusted .limit value: 1) ptimer_get_count() returns incorrect counter value for the disabled timer after loading the counter with a small value, because adjusted limit value is used instead of the original. For instance: 1) ptimer_stop(t) 2) ptimer_set_period(t, 1) 3) ptimer_set_limit(t, 0, 1) 4) ptimer_get_count(t) <-- would return 10000 instead of 0 2) ptimer_get_count() might return incorrect value for the timer running with a adjusted limit value. For instance: 1) ptimer_stop(t) 2) ptimer_set_period(t, 1) 3) ptimer_set_limit(t, 10, 1) 4) ptimer_run(t) 5) ptimer_get_count(t) <-- might return value > 10 3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the limit value, so it is still possible to make timer timeout value arbitrary small. For instance: 1) ptimer_set_period(t, 10000) 2) ptimer_set_limit(t, 1, 0) 3) ptimer_set_period(t, 1) <-- bypass limit correction Fix all of the above issues by adjusting timer period instead of the limit. Perform the adjustment for periodic timer only. Use the delta value instead of the limit to make decision whether adjustment is required, as limit could be altered while timer is running, resulting in incorrect value returned by ptimer_get_count. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Use the in kernel GIC model for KVM runsEdgar E. Iglesias
Use the in kernel GIC model when running with KVM enabled. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Delay realization of GIC until post CPU realizationEdgar E. Iglesias
Delay the realization of the GIC until after CPUs are realized. This is needed for KVM as the in-kernel GIC model will fail if it is realized with no available CPUs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Make the RPU subsystem optionalEdgar E. Iglesias
The way we currently model the RPU subsystem is of quite limited use. In addition to that, it causes problems for KVM and for GDB debugging. Make the RPU optional by adding a has_rpu property and default to having it disabled. This changes the default setup from having the RPU to not longer having it. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Add a secure prop to en/disable ARM Security ExtensionsEdgar E. Iglesias
Add a secure prop to en/disable ARM Security Extensions. This is particularly useful for KVM runs. Default to disabled to match the behavior of KVM. This changes the default setup from having the ARM Security Extensions to not longer having them. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/arm/virt: Reject gic-version=host for non-KVMCole Robinson
If you try to gic-version=host with TCG on a KVM aarch64 host, qemu segfaults, since host requires KVM APIs. Explicitly reject gic-version=host if KVM is not enabled https://bugzilla.redhat.com/show_bug.cgi?id=1339977 Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06i2c: add aspeed i2c controllerCédric Le Goater
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/intc/gic: RAZ/WI non-sec access to sec interruptsJens Wiklander
Treat non-secure accesses to registers and bits in registers of secure interrupts as RAZ/WI. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06hw/arm/virt: fix limit of 64-bit ACPI/ECAM PCI MMIO rangeArd Biesheuvel
Set the MMIO range limit field to 'base + size - 1' as required. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06target-arm: Don't try to set ESR IL bit in arm_cpu_do_interrupt_aarch64()Peter Maydell
Remove some incorrect code from arm_cpu_do_interrupt_aarch64() which attempts to set the IL bit in the syndrome register based on the value of env->thumb. This is wrong in several ways: * IL doesn't indicate Thumb-vs-ARM, it indicates instruction length (which may be 16 or 32 for Thumb and is always 32 for ARM) * not every syndrome format uses IL like this -- for some IL is always set, and for some it is always clear * the code is changing esr_el[new_el] even for interrupt entry, which is not supposed to modify ESR_ELx at all Delete the code, and instead rely on the syndrome value in env->exception.syndrome having already been set up with the correct value of IL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org
2016-06-06target-arm: Set IL bit in syndromes for insn abort, watchpoint, swstepPeter Maydell
For some exception syndrome types, the IL bit should always be set. This includes the instruction abort, watchpoint and software step syndrome types; add the missing ARM_EL_IL bit to the syndrome values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org
2016-06-06target-arm: A64: Create Instruction Syndromes for Data AbortsEdgar E. Iglesias
Add support for generating the ISS (Instruction Specific Syndrome) for Data Abort exceptions taken from AArch64. These syndromes are used by hypervisors for example to trap and emulate memory accesses. We save the decoded data out-of-band with the TBs at translation time. When exceptions hit, the extra data attached to the TB is used to recreate the state needed to encode instruction syndromes. This avoids the need to emit moves with every load/store. Based on a suggestion from Peter Maydell. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06target-arm: Add the HSTR_EL2 registerAlistair Francis
Add the Hypervisor System Trap Register for EL2. This register is used early in the Linux boot and without it the kernel aborts with a "Synchronous Abort" error. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into stagingPeter Maydell
readdir_r() to readdir() conversion, various minor cleanups # gpg: Signature made Mon 06 Jun 2016 10:52:52 BST # gpg: using DSA key 0x02FC3AEB0101DBC2 # gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>" # gpg: aka "Greg Kurz <groug@free.fr>" # gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>" # gpg: aka "Gregory Kurz (Groug) <groug@free.fr>" # gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>" # gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2 * remotes/gkurz/tags/for-upstream: 9p: switch back to readdir() 9p: add locking to V9fsDir 9p: introduce the V9fsDir type 9p: drop useless out: label 9p: drop useless inclusion of hw/i386/pc.h 9p/fsdev: remove obsolete references to virtio 9p: some more cleanup in #include directives Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20160606-1' into ↵Peter Maydell
staging virtio-gpu: scanout fix, live migration support vmsvga: security fixes # gpg: Signature made Mon 06 Jun 2016 08:05:00 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20160606-1: virtio-gpu: add live migration support vmsvga: don't process more than 1024 fifo commands at once vmsvga: shadow fifo registers vmsvga: add more fifo checks vmsvga: move fifo sanity checks to vmsvga_fifo_length virtio-gpu: fix scanout rectangles Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06scsi-disk: fix reads from scsi-disk devicesMark Cave-Ayland
Commit fcaafb1001b9c42817714dd3b2aadcfdb997b53d accidentally broke reads from scsi-disk devices when being updated from its original form to use the new byte-based block functions. Add the extra missing sector to offset conversion in order to restore read functionality. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-20160606-1' ↵Peter Maydell
into staging audio: pa volume fix, some qomifying. # gpg: Signature made Mon 06 Jun 2016 08:01:21 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-audio-20160606-1: hw/audio: QOM'ify milkymist-ac97.c hw/audio: QOM'ify intel-hda hw/audio: QOM cleanup for intel-hda hw/audio: QOM'ify cs4231.c audio: pa: Set volume of recording stream instead of recording device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06Merge remote-tracking branch 'remotes/rth/tags/pull-tgt-20160605' into stagingPeter Maydell
Check address ranges for disassembly # gpg: Signature made Sun 05 Jun 2016 17:30:28 BST # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tgt-20160605: target-*: dfilter support for in_asm Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06gdbstub: avoid busy loop while waiting for gdbPeter Wu
While waiting for a gdb response, or while sending an acknowledgement there is not much to do, so do not mark the socket as non-blocking to avoid a busy loop while paused at gdb. This only affects the user-mode emulation (qemu-arm -g 1234 ./a.out). Note that this issue was reported before at https://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg02277.html. While at it, close the gdb client fd on EOF or error while reading. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-069p: switch back to readdir()Greg Kurz
This patch changes the 9p code to use readdir() again instead of readdir_r(), which is deprecated in glibc 2.24. All the locking was put in place by a previous patch. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 02:33:13 +0000