aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-19VMDK: create different subformatsFam Zheng
Add create option 'format', with enums: monolithicSparse monolithicFlat twoGbMaxExtentSparse twoGbMaxExtentFlat Each creates a subformat image file. The default is monolithicSparse. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: open/read/write for monolithicFlat imageFam Zheng
Parse vmdk decriptor file and open mono flat image. Read/write the flat extent. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: change get_cluster_offset return typeFam Zheng
The return type of get_cluster_offset was an offset that use 0 to denote 'not allocated', this will be no longer true for flat extents, as we see flat extent file as a single huge cluster whose offset is 0 and length is the whole file length. So now we use int return value, 0 means success and otherwise offset invalid. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: move 'static' cid_update flag to bs fieldFam Zheng
Cid_update is the flag for updating CID on first write after opening the image. This should be per image open rather than per program life cycle, so change it from static var of vmdk_write to a field in BDRVVmdkState. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: flush multiple extentsFam Zheng
Flush all the file that referenced by the image. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: add field BDRVVmdkState.desc_offsetFam Zheng
There are several occurrence of magic number 0x200 as the descriptor offset within mono sparse image file. This is not the case for images with separate descriptor file. So a field is added to BDRVVmdkState to hold the correct value. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: separate vmdk_open by format versionFam Zheng
Separate vmdk_open by subformats to: * vmdk_open_vmdk3 * vmdk_open_vmdk4 Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: probe for monolithicFlat imagesFam Zheng
Probe as the same behavior as VMware does. Recognize image as monolithicFlat descriptor file when the file is text and the first effective line (not '#' leaded comment or space line) is either 'version=1' or 'version=2'. No space or upper case charactors accepted. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: bugfix, align offset to cluster in get_whole_clusterFam Zheng
In get_whole_cluster, the offset is not aligned to cluster when reading from backing_hd. When the first write to child is not at the cluster boundary, wrong address data from parent is copied to child. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19VMDK: introduce VmdkExtentFam Zheng
Introduced VmdkExtent array into BDRVVmdkState, enable holding multiple image extents for multiple file image support. Signed-off-by: Fam Zheng <famcool@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19qemu-config: Document -drive optionsLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19qemu-options.hx: Document missing -drive optionsLuiz Capitulino
They are 'werror', 'rerror' and 'readonly'. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19scsi-disk: Mask out serial number EVPDHannes Reinecke
If the serial number is not set we should mask it out in the list of supported VPD pages and mark it as not supported. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19scsi-disk: Fixup debugging statementHannes Reinecke
A debugging statement wasn't converted to the new interface. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19scsi: Add 'hba_private' to SCSIRequestHannes Reinecke
'tag' is just an abstraction to identify the command from the driver. So we should make that explicit by replacing 'tag' with a driver-defined pointer 'hba_private'. This saves the lookup for driver handling several commands in parallel. 'tag' is still being kept for tracing purposes. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18iov: Update parameter usage in iov_(to|from)_buf()Hannes Reinecke
iov_to_buf() has an 'offset' parameter, iov_from_buf() hasn't. This patch adds the missing parameter to iov_from_buf(). It also renames the 'offset' parameter to 'iov_off' to emphasize it's the offset into the iovec and not the buffer. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18qemu-io: Fix if scoping bugDevin Nakamura
Fix a bug caused by lack of braces in if statement Lack of braces means that if(count & 0x1ff) is never reached Signed-off-by: Devin Nakamura <devin122@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18qemu-io: Fix formattingDevin Nakamura
Replaced tabs with spaces, 8 space indentations with 4 space indentation, and other fixes to better adhere to CODING_STYLE Signed-off-by: Devin Nakamura <devin122@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18sheepdog: add full data preallocation supportMORITA Kazutaka
This introduces qemu-img create option for sheepdog which allows the data to be fully preallocated (note that sheepdog always preallocates metadata). The option is disabled by default and you need to enable it like the following: qemu-img create sheepdog:test -o preallocation=full 1G Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-16Fix signal handling of SIG_IPI when io-thread is enabledAlexandre Raymond
Both the signal thread (via sigwait()) and the cpu thread (via a normal signal handler) were attempting to catch SIG_IPI. This resulted in random freezes under Darwin. This patch separates SIG_IPI from the rest of the signals handled by the signal thread, because it is independently caught by the cpu thread. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-16Fix signal handling when io-thread is disabledAlexandre Raymond
Changes since v1: - take pthread_sigmask() out of the ifdef as it is now common to both parts. This fix effectively blocks, in the main thread, the signals handled by signalfd or the compatibility signal thread. This way, such signals are received synchronously in the main thread through sigfd_handler() instead of triggering the signal handler directly, asynchronously. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-16tcg/README: Expand advice on number of TCG ops per target insnPeter Maydell
Expand the note on the number of TCG ops generated per target insn, to be clearer about the range of applicability of the 20 op rule of thumb. Also add a note about the hard MAX_OP_PER_INSTR limit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14set ELF_HWCAP for SPARC and SPARC64Artyom Tarasenko
setting ELF_HWCAP fixes dynamic library loading for Linux/sparc64 This patch allows loading busybox from Debian 6 initrd Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14Sparc: fix FPU and AM enable checks for translationBlue Swirl
Translation used incorrectly CPUState fields directly to check for FPU enable state and 32 bit address masking on Sparc64. Fix by using TB flags instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: C99 comment fix for block-transfer ASIsTsuneo Saito
Fixed C99 comments on block-tranfer ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add JPS1 ASI_BLK_AIU[PS]L ASIs for ldfa and stfaTsuneo Saito
Support JPS1 little endian block transfer ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add UA2007 ASI_BLK_AIU[PS]L? ASIs for stfaTsuneo Saito
Support UA2007 block store ASIs for stfa instructions. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add UA2007 ASI_BLK_AIU[PS]L? ASIs for ldfaTsuneo Saito
Support UA2007 block load ASIs for ldfa instructions. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on stfa/stdfa/stqfaTsuneo Saito
stfa/stdfa/stqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement stfa/stdfa/stqfa instrcutions properlyTsuneo Saito
This patch implements sparcv9 stfa/stdfa/stqfa instructions with non block-store ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on ldfa/lddfa/ldqfaTsuneo Saito
ldfa/lddfa/ldqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement ldfa/lddfa/ldqfa instructions properlyTsuneo Saito
This patch implements sparcv9 ldfa/lddfa/ldqfa instructions with non block-load ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12os-posix: set groups properly for -runasStefan Hajnoczi
Andrew Griffiths reports that -runas does not set supplementary group IDs. This means that gid 0 (root) is not dropped when switching to an unprivileged user. Add an initgroups(3) call to use the -runas user's /etc/groups membership to update the supplementary group IDs. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12esp: cancel current request only if some request is in flightHervé Poussineau
This bug was introduced in 94d3f98a3f3caddd7875f9a11776daeb84962a7b: scsi_cancel_io was checking if some request was pending before trying to cancel it, while scsi_req_cancel always cancels the request. This may lead to a crash of Qemu due to dereferencing a NULL pointer, as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12target-alpha, target-ppc: Remove unnecessary setjmp.h includePeter Maydell
Remove the include of setjmp.h from the cpu.h of target-alpha and target-ppc. This is unnecessary because cpu-defs.h already includes this header; this change brings these two targets into line with all the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12Remove unneeded setjmp.h (fix compilation on Debian "lenny")Stefan Weil
Some versions of png.h cannot be included after setjmp.h, even when PNG_SKIP_SETJMP_CHECK was defined. setjmp.h was included from qemu-common.h and is not needed there. Removing the include statement fixes compilation of ui/vnc-enc-tight.c with CONFIG_VNC_PNG defined. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12tcg: Reload local variables after return from longjmpJan Kiszka
Recent compilers look deep into cpu_exec, find longjmp as a noreturn function and decide to smash some stack variables as they won't be used again. This may lead to env becoming invalid after return from setjmp, causing crashes. Fix it by reloading env from cpu_single_env in that case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec-all.h: Make MAX_OP_PER_INSTR large enough for target-arm's usesPeter Maydell
The target-arm frontend's worst-case TCG ops per instr is 194 (and in general many of the "load multiple registers" ARM instructions generate more than 100 TCG ops). Raise MAX_OP_PER_INSTR accordingly to avoid possible buffer overruns. Since it doesn't make any sense for the "64 bit guest on 32 bit host" case to have a smaller limit than the normal case, we collapse the two cases back into each other again. (This increase costs us about 14K in extra static buffer space and 21K of extra margin at the end of a 32MB codegen buffer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec.c: Fix calculation of code_gen_buffer_max_sizePeter Maydell
When calculating the point at which we should not try to put another TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE but OPC_BUF_SIZE. This is because the target translate.c will only stop when an instruction has put it past the OPC_MAX_SIZE limit, so we have to include the MAX_OP_PER_INSTR margin which that final insn might have used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12spapr: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12s390-virtio: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12ppc405_uc: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12pl080: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msix: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msi: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12intel-hda: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12hpet: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec: add endian specific phys ld/st functionsAlexander Graf
Device code some times needs to access physical memory and does that through the ld./st._phys functions. However, these are the exact same functions that the CPU uses to access memory, which means they will be endianness swapped depending on the target CPU. However, devices don't know about the CPU's endianness, but instead access memory directly using their own interface to the memory bus, so they need some way to read data with their native endianness. This patch adds _le and _be functions to ld./st._phys. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-05ide: Initialise buffers with zerosKevin Wolf
Just in case there's still a way how a guest can read out buffers when it's not supposed to, let's zero the buffers during initialisation so that we don't leak information to the guest. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05ide: Ignore reads during PIO in and writes during PIO outKevin Wolf
This fixes https://bugs.launchpad.net/qemu/+bug/786209: When the DRQ_STAT bit is set, the IDE core permits both data reads and data writes, regardless of whether the current transfer was initiated as a read or write. This potentially leaks uninitialized host memory into the guest, if, before doing anything else to an IDE device, the guest begins a write transaction (e.g. WIN_WRITE), but then *reads* from the IO port instead of writing to it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-06 14:35:24 +0000