aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-16block: Use QEMU_IS_ALIGNEDNir Soffer
Replace instances of: (n & (BDRV_SECTOR_SIZE - 1)) == 0 And: (n & ~BDRV_SECTOR_MASK) == 0 With: QEMU_IS_ALIGNED(n, BDRV_SECTOR_SIZE) Which reveals the intent of the code better, and makes it easier to locate the code checking alignment. Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-id: 20190827185913.27427-2-nsoffer@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190913' into staging target-arm queue: * aspeed: add a GPIO controller to the SoC * aspeed: Various refactorings * aspeed: Improve DMA controller modelling * atomic_template: fix indentation in GEN_ATOMIC_HELPER * qemu-ga: Convert invocation documentation to rST # gpg: Signature made Fri 13 Sep 2019 16:49:05 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190913: qemu-ga: Convert invocation documentation to rST atomic_template: fix indentation in GEN_ATOMIC_HELPER aspeed/scu: Introduce a aspeed_scu_get_apb_freq() routine aspeed/scu: Introduce per-SoC SCU types aspeed/smc: Calculate checksum on normal DMA aspeed/smc: Inject errors in DMA checksum aspeed/smc: Add DMA calibration settings aspeed/smc: Add support for DMAs aspeed: Use consistent typenames aspeed: Remove unused SoC definitions aspeed: add a GPIO controller to the SoC hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13qemu-ga: Convert invocation documentation to rSTPeter Maydell
The qemu-ga documentation is currently in qemu-ga.texi in Texinfo format, which we present to the user as: * a qemu-ga manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-ga manpage * part of the interop/ Sphinx manual Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 20190905131040.8350-1-peter.maydell@linaro.org
2019-09-13atomic_template: fix indentation in GEN_ATOMIC_HELPEREmilio G. Cota
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/scu: Introduce a aspeed_scu_get_apb_freq() routineCédric Le Goater
The APB frequency can be calculated directly when needed from the HPLL_PARAM and CLK_SEL register values. This removes useless state in the model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-11-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/scu: Introduce per-SoC SCU typesCédric Le Goater
and use a class AspeedSCUClass to define each SoC characteristics. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-10-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Calculate checksum on normal DMAChristian Svensson
This patch adds the missing checksum calculation on normal DMA transfer. According to the datasheet this is how the SMC should behave. Verified on AST1250 that the hardware matches the behaviour. Signed-off-by: Christian Svensson <bluecmd@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Inject errors in DMA checksumCédric Le Goater
Emulate read errors in the DMA Checksum Register for high frequencies and optimistic settings of the Read Timing Compensation Register. This will help in tuning the SPI timing calibration algorithm. Errors are only injected when the property "inject_failure" is set to true as suggested by Philippe. The values below are those to expect from the first flash device of the FMC controller of a palmetto-bmc machine. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add DMA calibration settingsCédric Le Goater
When doing calibration, the SPI clock rate in the CE0 Control Register and the read delay cycles in the Read Timing Compensation Register are set using bit[11:4] of the DMA Control Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190904070506.1052-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add support for DMAsCédric Le Goater
The FMC controller on the Aspeed SoCs support DMA to access the flash modules. It can operate in a normal mode, to copy to or from the flash module mapping window, or in a checksum calculation mode, to evaluate the best clock settings for reads. The model introduces two custom address spaces for DMAs: one for the AHB window of the FMC flash devices and one for the DRAM. The latter is populated using a "dram" link set from the machine with the RAM container region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: Use consistent typenamesCédric Le Goater
Improve the naming of the different controller models to ease their generation when initializing the SoC. The rename of the SMC types is breaking migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: Remove unused SoC definitionsCédric Le Goater
There are no QEMU Aspeed machines using the SoCs "ast2400-a0" or "ast2400". Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: add a GPIO controller to the SoCRashmica Gupta
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500Rashmica Gupta
GPIO pins are arranged in groups of 8 pins labeled A,B,..,Y,Z,AA,AB,AC. (Note that the ast2400 controller only goes up to group AB). A set has four groups (except set AC which only has one) and is referred to by the groups it is composed of (eg ABCD,EFGH,...,YZAAAB). Each set is accessed and controlled by a bank of 14 registers. These registers operate on a per pin level where each bit in the register corresponds to a pin, except for the command source registers. The command source registers operate on a per group level where bits 24, 16, 8 and 0 correspond to each group in the set. eg. registers for set ABCD: |D7...D0|C7...C0|B7...B0|A7...A0| <- GPIOs |31...24|23...16|15....8|7.....0| <- bit position Note that there are a couple of groups that only have 4 pins. There are two ways that this model deviates from the behaviour of the actual controller: (1) The only control source driving the GPIO pins in the model is the ARM model (as there currently aren't models for the LPC or Coprocessor). (2) None of the registers in the model are reset tolerant (needs integration with the watchdog). Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Tested-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-2-clg@kaod.org [clg: fixed missing header files made use of HWADDR_PRIx to fix compilation on windows ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-sep-12-2019' ↵Peter Maydell
into staging MIPS queue for September 12th, 2019 # gpg: Signature made Thu 12 Sep 2019 17:26:10 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-sep-12-2019: target/mips: gdbstub: Revert commit 8e0b373 hw/mips/mips_jazz: Remove no-longer-necessary override of do_unassigned_access target/mips: Switch to do_transaction_failed() hook hw/mips/mips_jazz: Override do_transaction_failed hook Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20190912a' into staging Migration pull 2019-09-12 New feature: UUID validation check from Yury Kotov plus a bunch of fixes. # gpg: Signature made Thu 12 Sep 2019 14:48:28 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20190912a: migration: fix one typo in comment of function migration_total_bytes() migration/qemu-file: fix potential buf waste for extra buf_index adjustment migration/qemu-file: remove check on writev_buffer in qemu_put_compression_data migration: Fix postcopy bw for recovery tests/migration: Add a test for validate-uuid capability tests/libqtest: Allow setting expected exit status migration: Add validate-uuid capability qemu-file: Rework old qemu_fflush comment migration: register_savevm_live doesn't need dev hw/net/vmxnet3: Fix leftover unregister_savevm migration: cleanup check on ops in savevm.handlers iterations migration: multifd_send_thread always post p->sem_sync when error happen Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - qcow2: Allow overwriting multiple compressed clusters at once for better performance - nfs: add support for nfs_umount - file-posix: write_zeroes fixes - qemu-io, blockdev-create, pr-manager: Fix crashes and memory leaks - qcow2: Fix the calculation of the maximum L2 cache size - vpc: Fix return code for vpc_co_create() - blockjob: Code cleanup - iotests improvements (e.g. for use with valgrind) # gpg: Signature made Fri 13 Sep 2019 11:19:19 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (23 commits) qcow2: Stop overwriting compressed clusters one by one block/create: Do not abort if a block driver is not available qemu-io: Don't leak pattern file in error path iotests: extend sleeping time under Valgrind iotests: extended timeout under Valgrind iotests: Valgrind fails with nonexistent directory iotests: Add casenotrun report to bash tests iotests: exclude killed processes from running under Valgrind iotests: allow Valgrind checking all QEMU processes block/nfs: add support for nfs_umount block/nfs: tear down aio before nfs_close iotests: skip 232 when run tests as root iotests: Test blockdev-create for vpc iotests: Restrict nbd Python tests to nbd iotests: Restrict file Python tests to file iotests: Add supported protocols to execute_test() vpc: Return 0 from vpc_co_create() on success file-posix: Fix has_write_zeroes after NO_FALLBACK pr-manager: Fix invalid g_free() crash bug iotests: Test reverse sub-cluster qcow2 writes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Wed 11 Sep 2019 15:36:02 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: virtio-blk: Cancel the pending BH when the dataplane is reset Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13qcow2: Stop overwriting compressed clusters one by oneAlberto Garcia
handle_alloc() tries to find as many contiguous clusters that need copy-on-write as possible in order to allocate all of them at the same time. However, compressed clusters are only overwritten one by one, so let's say that we have an image with 1024 consecutive compressed clusters: qemu-img create -f qcow2 hd.qcow2 64M for f in `seq 0 64 65472`; do qemu-io -c "write -c ${f}k 64k" hd.qcow2 done In this case trying to overwrite the whole image with one large write request results in 1024 separate allocations: qemu-io -c "write 0 64M" hd.qcow2 This restriction comes from commit 095a9c58ce12afeeb90c2 from 2008. Nowadays QEMU can overwrite multiple compressed clusters just fine, and in fact it already does: as long as the first cluster that handle_alloc() finds is not compressed, all other compressed clusters in the same batch will be overwritten in one go: qemu-img create -f qcow2 hd.qcow2 64M qemu-io -c "write -z 0 64k" hd.qcow2 for f in `seq 64 64 65472`; do qemu-io -c "write -c ${f}k 64k" hd.qcow2 done Compared to the previous one, overwriting this image on my computer goes from 8.35s down to 230ms. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: John Snow <jsnow@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13block/create: Do not abort if a block driver is not availablePhilippe Mathieu-Daudé
The 'blockdev-create' QMP command was introduced as experimental feature in commit b0292b851b8, using the assert() debug call. It got promoted to 'stable' command in 3fb588a0f2c, but the assert call was not removed. Some block drivers are optional, and bdrv_find_format() might return a NULL value, triggering the assertion. Stable code is not expected to abort, so return an error instead. This is easily reproducible when libnfs is not installed: ./configure [...] module support no Block whitelist (rw) Block whitelist (ro) libiscsi support yes libnfs support no [...] Start QEMU: $ qemu-system-x86_64 -S -qmp unix:/tmp/qemu.qmp,server,nowait Send the 'blockdev-create' with the 'nfs' driver: $ ( cat << 'EOF' {'execute': 'qmp_capabilities'} {'execute': 'blockdev-create', 'arguments': {'job-id': 'x', 'options': {'size': 0, 'driver': 'nfs', 'location': {'path': '/', 'server': {'host': '::1', 'type': 'inet'}}}}, 'id': 'x'} EOF ) | socat STDIO UNIX:/tmp/qemu.qmp {"QMP": {"version": {"qemu": {"micro": 50, "minor": 1, "major": 4}, "package": "v4.1.0-733-g89ea03a7dc"}, "capabilities": ["oob"]}} {"return": {}} QEMU crashes: $ gdb qemu-system-x86_64 core Program received signal SIGSEGV, Segmentation fault. (gdb) bt #0 0x00007ffff510957f in raise () at /lib64/libc.so.6 #1 0x00007ffff50f3895 in abort () at /lib64/libc.so.6 #2 0x00007ffff50f3769 in _nl_load_domain.cold.0 () at /lib64/libc.so.6 #3 0x00007ffff5101a26 in .annobin_assert.c_end () at /lib64/libc.so.6 #4 0x0000555555d7e1f1 in qmp_blockdev_create (job_id=0x555556baee40 "x", options=0x555557666610, errp=0x7fffffffc770) at block/create.c:69 #5 0x0000555555c96b52 in qmp_marshal_blockdev_create (args=0x7fffdc003830, ret=0x7fffffffc7f8, errp=0x7fffffffc7f0) at qapi/qapi-commands-block-core.c:1314 #6 0x0000555555deb0a0 in do_qmp_dispatch (cmds=0x55555645de70 <qmp_commands>, request=0x7fffdc005c70, allow_oob=false, errp=0x7fffffffc898) at qapi/qmp-dispatch.c:131 #7 0x0000555555deb2a1 in qmp_dispatch (cmds=0x55555645de70 <qmp_commands>, request=0x7fffdc005c70, allow_oob=false) at qapi/qmp-dispatch.c:174 With this patch applied, QEMU returns a QMP error: {'execute': 'blockdev-create', 'arguments': {'job-id': 'x', 'options': {'size': 0, 'driver': 'nfs', 'location': {'path': '/', 'server': {'host': '::1', 'type': 'inet'}}}}, 'id': 'x'} {"id": "x", "error": {"class": "GenericError", "desc": "Block driver 'nfs' not found or not supported"}} Cc: qemu-stable@nongnu.org Reported-by: Xu Tian <xutian@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13qemu-io: Don't leak pattern file in error pathKevin Wolf
qemu_io_alloc_from_file() needs to close the pattern file even if some error occurred. Setting f = NULL in the success path and checking it for NULL in the error path isn't strictly necessary at this point, but let's do it anyway in case someone later adds a 'goto error' after closing the file. Coverity: CID 1405303 Fixes: 4d731510d34f280ed45a6de621d016f67a49ea48 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2019-09-13iotests: extend sleeping time under ValgrindAndrey Shinkevich
To synchronize the time when QEMU is running longer under the Valgrind, increase the sleeping time in the test 247. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13iotests: extended timeout under ValgrindAndrey Shinkevich
As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is to be increased in the test cases 028, 183 and 192 when running under the Valgrind. Suggested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13iotests: Valgrind fails with nonexistent directoryAndrey Shinkevich
The Valgrind uses the exported variable TMPDIR and fails if the directory does not exist. Let us exclude such a test case from being run under the Valgrind and notify the user of it. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13iotests: Add casenotrun report to bash testsAndrey Shinkevich
The new function _casenotrun() is to be invoked if a test case cannot be run for some reason. The user will be notified by a message passed to the function. It is the caller's responsibility to make skipped a particular test. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13iotests: exclude killed processes from running under ValgrindAndrey Shinkevich
The Valgrind tool fails to manage its termination in multi-threaded processes when they raise the signal SIGKILL. The bug has been reported to the Valgrind maintainers and was registered as the bug #409141: https://bugs.kde.org/show_bug.cgi?id=409141 Let's exclude such test cases from running under the Valgrind until a new version with the bug fix is released because checking for the memory issues is covered by other test cases. Suggested-by: John Snow <jsnow@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13iotests: allow Valgrind checking all QEMU processesAndrey Shinkevich
With the '-valgrind' option, let all the QEMU processes be run under the Valgrind tool. The Valgrind own parameters may be set with its environment variable VALGRIND_OPTS, e.g. $ VALGRIND_OPTS="--leak-check=yes" ./check -valgrind <test#> or they may be listed in the Valgrind checked file ./.valgrindrc or ~/.valgrindrc like --memcheck:leak-check=no --memcheck:track-origins=yes To exclude a specific process from running under the Valgrind, the corresponding environment variable VALGRIND_QEMU_<name> is to be set to the empty string: $ VALGRIND_QEMU_IO= ./check -valgrind <test#> When QEMU-IO process is being killed, the shell report refers to the text of the command in _qemu_io_wrapper(), which was modified with this patch. So, the benchmark output for the tests 039, 061 and 137 is to be changed also. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13block/nfs: add support for nfs_umountPeter Lieven
libnfs recently added support for unmounting. Add support in Qemu too. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13block/nfs: tear down aio before nfs_closePeter Lieven
nfs_close is a sync call from libnfs and has its own event handler polling on the nfs FD. Avoid that both QEMU and libnfs are intefering here. CC: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/filemon-test-pull-request' into staging Fix filemonitor test broken with newest Linux kernel # gpg: Signature made Wed 11 Sep 2019 10:31:05 BST # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/filemon-test-pull-request: tests: make filemonitor test more robust to event ordering Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-12target/mips: gdbstub: Revert commit 8e0b373Libo Zhou
Multiple reports from users were received regarding failures of packet 'g' communication with gdb for some MIPS configurations. It was found out (by bisecting) that the problematic commit is 8e0b373. Revert that commit until a better solution is developed. Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Libo Zhou <zhlb29@foxmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1568207966-25202-1-git-send-email-aleksandar.markovic@rt-rk.com>
2019-09-12hw/mips/mips_jazz: Remove no-longer-necessary override of do_unassigned_accessPeter Maydell
Now that the MIPS CPU implementation uses the new do_transaction_failed hook, we can remove the old code that handled the do_unassigned_access hook. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20190802160458.25681-4-peter.maydell@linaro.org>
2019-09-12target/mips: Switch to do_transaction_failed() hookPeter Maydell
Switch the MIPS target from the old unassigned_access hook to the new do_transaction_failed hook. Unlike the old hook, do_transaction_failed is only ever called from the TCG memory access paths, so there is no need for the "ignore this if we're using KVM" hack that we were previously using to work around the way unassigned_access was called for all kinds of memory accesses to unassigned physical addresses. The MIPS target does not ever do direct memory reads by physical address (via either ldl_phys etc or address_space_ldl etc), so the only memory accesses this affects are the 'normal' guest loads and stores, which will be handled by the new hook; their behaviour is unchanged. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20190802160458.25681-3-peter.maydell@linaro.org>
2019-09-12hw/mips/mips_jazz: Override do_transaction_failed hookPeter Maydell
The MIPS Jazz ('magnum' and 'pica61') boards have some code which overrides the CPU's do_unassigned_access hook, so they can intercept it and not raise exceptions on data accesses to invalid addresses, only for instruction fetches. We want to switch MIPS over to using the do_transaction_failed hook instead, so add an intercept for that as well, and make the board code install whichever hook the CPU is actually using. Once we've changed the CPU implementation we can remove the redundant code for the old hook. Note: I am suspicious that the behaviour as implemented here may not be what the hardware really does. It was added in commit 54e755588cf1e90f0b14 to restore the behaviour that was broken by commit c658b94f6e8c206c59d. But prior to commit c658b94f6e8c206c59d every MIPS board generated exceptions for instruction access to invalid addresses but not for data accesses; and other boards, notably Malta, were fixed by making all invalid accesses behave as reads-as-zero (see the call to empty_slot_init() in mips_malta_init()). Hardware that raises exceptions for instruction access and not data access seems to me to be an unlikely design, and it's possible that the right way to emulate this is to make the Jazz boards do what we did with Malta (or some variation of that). Nonetheless, since I don't have access to real hardware to test against I have taken the approach of "make QEMU continue to behave the same way it did before this commit". I have updated the comment to correct the parts that are no longer accurate and note that the hardware might behave differently. The test case for the need for the hook-hijacking is in https://bugs.launchpad.net/qemu/+bug/1245924 That BIOS will boot OK either with this overriding of both hooks, or with a simple "global memory region to ignore bad accesses of all types", so it doesn't provide evidence either way, unfortunately. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20190802160458.25681-2-peter.maydell@linaro.org>
2019-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-4.2-pull-request' into staging Add several floppy drive ioctl, xtensa call0 ABI support, arm MAX_RESERVED_VA for M-profile, aarch64 AT_HWCAP2, qOffsets' query for ELF, memfd_create, and some code cleanup # gpg: Signature made Wed 11 Sep 2019 07:48:45 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-4.2-pull-request: linux-user: Add support for FDRESET, FDRAWCMD, FDTWADDLE, and FDEJECT ioctls linux-user: Add support for FDMSGON and FDMSGOFF ioctls linux-user: Add support for FDFLUSH ioctl linux-user: Add support for FIOGETOWN and FIOSETOWN ioctls linux-user: Add support for RNDRESEEDCRNG ioctl linux-user: drop redundant handling of environment variables target/xtensa: linux-user: add call0 ABI support linux-user: Support gdb 'qOffsets' query for ELF linux-user/arm: Adjust MAX_RESERVED_VA for M-profile linux-user: Pass CPUState to MAX_RESERVED_VA linux-user: add memfd_create linux-user: fail and report on bad dfilter specs linux-user: erroneous fd_trans_unregister call linux-user: Add AT_HWCAP2 for aarch64-linux-user linux-user: remove useless variable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-12migration: fix one typo in comment of function migration_total_bytes()Wei Yang
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190912024957.11780-1-richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration/qemu-file: fix potential buf waste for extra buf_index adjustmentWei Yang
In add_to_iovec(), qemu_fflush() will be called if iovec is full. If this happens, buf_index is reset. Currently, this is not checked and buf_index would always been adjust with buf size. This is not harmful, but will waste some space in file buffer. This patch make add_to_iovec() return 1 when it has flushed the file. Then the caller could check the return value to see whether it is necessary to adjust the buf_index any more. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190911132839.23336-3-richard.weiyang@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration/qemu-file: remove check on writev_buffer in qemu_put_compression_dataWei Yang
The check of writev_buffer is in qemu_fflush, which means it is not harmful if it is NULL. And removing it will make the code consistent since all other add_to_iovec() is called without the check. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190911132839.23336-2-richard.weiyang@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration: Fix postcopy bw for recoveryPeter Xu
We've got max-postcopy-bandwidth parameter but it's not applied correctly after a postcopy recovery so the recovered migration stream will still eat the whole net bandwidth. Fix that up. Reported-by: Xiaohui Li <xiaohli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20190906130103.20961-1-peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12tests/migration: Add a test for validate-uuid capabilityYury Kotov
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190903162246.18524-4-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12tests/libqtest: Allow setting expected exit statusYury Kotov
Add qtest_set_expected_status function to set expected exit status of child process. By default expected exit status is 0. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190903162246.18524-3-yury-kotov@yandex-team.ru> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration: Add validate-uuid capabilityYury Kotov
This capability realizes simple source validation by UUID. It's useful for live migration between hosts. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12qemu-file: Rework old qemu_fflush commentDr. David Alan Gilbert
Commit 11808bb removed the non-iovec based write support, the comment hung on. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190823103946.7388-1-dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration: register_savevm_live doesn't need devDr. David Alan Gilbert
Commit 78dd48df3 removed the last caller of register_savevm_live for an instantiable device (rather than a single system wide device); so trim out the parameter. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190822115433.12070-1-dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12hw/net/vmxnet3: Fix leftover unregister_savevmDr. David Alan Gilbert
Commit 78dd48df3 reworked vmxnet3's live migration but left a straggling unregister_savevm call. Remove it, although it doesn't seem to have any bad effect. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190822111218.12079-1-dgilbert@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration: cleanup check on ops in savevm.handlers iterationsWei Yang
During migration, there are several places to iterate on savevm.handlers. And on each iteration, we need to check its ops and related callbacks before invoke it. Generally, ops is the first element to check, and it is only necessary to check it once. This patch clean all the related part in savevm.c to check ops only once in those iterations. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190819032804.8579-1-richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-12migration: multifd_send_thread always post p->sem_sync when error happenIvan Ren
When encounter error, multifd_send_thread should always notify who pay attention to it before exit. Otherwise it may block migration_thread at multifd_send_sync_main forever. Error as follow: ------------------------------------------------------------------------------- (gdb) bt #0 0x00007f4d669dfa0b in do_futex_wait.constprop.1 () from /lib64/libpthread.so.0 #1 0x00007f4d669dfa9f in __new_sem_wait_slow.constprop.0 () from /lib64/libpthread.so.0 #2 0x00007f4d669dfb3b in sem_wait@@GLIBC_2.2.5 () from /lib64/libpthread.so.0 #3 0x0000562ccf0a5614 in qemu_sem_wait (sem=sem@entry=0x562cd1b698e8) at util/qemu-thread-posix.c:319 #4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099 #5 0x0000562ccecb95f4 in ram_save_iterate (f=0x562cd0ecc000, opaque=<optimized out>) at /qemu/migration/ram.c:3550 #6 0x0000562ccef43c23 in qemu_savevm_state_iterate (f=0x562cd0ecc000, postcopy=false) at migration/savevm.c:1189 #7 0x0000562ccef3dcf3 in migration_iteration_run (s=0x562cd09fabf0) at migration/migration.c:3131 #8 migration_thread (opaque=opaque@entry=0x562cd09fabf0) at migration/migration.c:3258 #9 0x0000562ccf0a4c26 in qemu_thread_start (args=<optimized out>) at util/qemu-thread-posix.c:502 #10 0x00007f4d669d9e25 in start_thread () from /lib64/libpthread.so.0 #11 0x00007f4d6670635d in clone () from /lib64/libc.so.6 (gdb) f 4 #4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099 1099 qemu_sem_wait(&p->sem_sync); (gdb) list 1094 } 1095 for (i = 0; i < migrate_multifd_channels(); i++) { 1096 MultiFDSendParams *p = &multifd_send_state->params[i]; 1097 1098 trace_multifd_send_sync_main_wait(p->id); 1099 qemu_sem_wait(&p->sem_sync); 1100 } 1101 trace_multifd_send_sync_main(multifd_send_state->packet_num); 1102 } 1103 (gdb) p i $1 = 0 (gdb) p multifd_send_state->params[0].pending_job $2 = 2 //It means the job before MULTIFD_FLAG_SYNC has already fail (gdb) p multifd_send_state->params[0].quit $3 = true Signed-off-by: Ivan Ren <ivanren@tencent.com> Message-Id: <1567044996-2362-1-git-send-email-ivanren@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-11tests: make filemonitor test more robust to event orderingDaniel P. Berrangé
The ordering of events that are emitted during the rmdir test have changed with kernel >= 5.3. Semantically both new & old orderings are correct, so we must be able to cope with either. To cope with this, when we see an unexpected event, we push it back onto the queue and look and the subsequent event to see if that matches instead. Tested-by: Peter Xu <peterx@redhat.com> Tested-by: Wei Yang <richardw.yang@linux.intel.com> Tested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-11linux-user: Add support for FDRESET, FDRAWCMD, FDTWADDLE, and FDEJECT ioctlsAleksandar Markovic
FDRESET, FDRAWCMD, FDTWADDLE, and FDEJECT ioctls are misc commands for controlling a floppy drive. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1567601968-26946-7-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-11linux-user: Add support for FDMSGON and FDMSGOFF ioctlsAleksandar Markovic
FDMSGON and FDMSGOFF switch informational messages of floppy drives on and off. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1567601968-26946-6-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-10 18:35:08 +0000