| Age | Commit message (Collapse) | Author |
|---|
|
Creating an image that requires format probing of the backing image is
potentially unsafe (we've had several CVEs over the years based on
probes leaking information to the guest on a subsequent boot, although
these days tools like libvirt are aware of the issue enough to prevent
the worst effects). For example, if our probing algorithm ever
changes, or if other tools like libvirt determine a different probe
result than we do, then subsequent use of that backing file under a
different format will present corrupted data to the guest.
Fortunately, the worst effects occur only when the backing image is
originally raw, and we at least prevent commit into a probed raw
backing file that would change its probed type.
Still, it is worth starting a deprecation clock so that future
qemu-img can refuse to create backing chains that would rely on
probing, to encourage clients to avoid unsafe practices. Most
warnings are intentionally emitted from bdrv_img_create() in the block
layer, but qemu-img convert uses bdrv_create() which cannot emit its
own warning without causing spurious warnings on other code paths. In
the end, all command-line image creation or backing file rewriting now
performs a check.
Furthermore, if we probe a backing file as non-raw, then it is safe to
explicitly record that result (rather than relying on future probes);
only where we probe a raw image do we care about further warnings to
the user when using such an image (for example, commits into a
probed-raw backing file are prevented), to help them improve their
tooling. But whether or not we make the probe results explicit, we
still warn the user to remind them to upgrade their workflow to supply
-F always.
iotest 114 specifically wants to create an unsafe image for later
amendment rather than defaulting to our new default of recording a
probed format, so it needs an update. While touching it, expand it to
cover all of the various warnings enabled by this patch. iotest 301
also shows a change to qcow messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-11-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For now, this is a mechanical addition; all callers pass false. But
the next patch will use it to improve 'qemu-img rebase -u' when
selecting a backing file with no format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20200706203954.341758-10-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The use of 'qemu-img amend' to change qcow2 backing files is not
tested very well. In particular, our implementation has a bug where
if a new backing file is provided without a format, then the prior
format is blindly reused, even if this results in data corruption, but
this is not caught by iotests.
There are also situations where amending other options needs access to
the original backing file (for example, on a downgrade to a v2 image,
knowing whether a v3 zero cluster must be allocated or may be left
unallocated depends on knowing whether the backing file already reads
as zero), but the command line does not have a nice way to tell us
both the backing file to use for opening the image as well as the
backing file to install after the operation is complete.
Even if we do allow changing the backing file, it is redundant with
the existing ability to change backing files via 'qemu-img rebase -u'.
It is time to deprecate this support (leaving the existing behavior
intact, even if it is buggy), and at a point in the future, require
the use of only 'qemu-img rebase' for adjusting backing chain
relations, saving 'qemu-img amend' for changes unrelated to the
backing chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-8-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Back in commit 6e6e55f5 (Jul 2017, v2.10), we tweaked the code to warn
if the backing file could not be opened but the user gave a size,
unless the user also passes the -u option to bypass the open of the
backing file. As one common reason for failure to open the backing
file is when there is mismatch in the requested backing format in
relation to what the backing file actually contains, we actually want
to open the backing file and ensure that it has the right format in as
many cases as possible. iotest 301 for qcow demonstrates how
detecting explicit format mismatch is useful to prevent the creation
of an image that would probe differently than the user requested. Now
is the time to finally turn the warning an error, as promised.
Note that the original warning was added prior to our documentation of
an official deprecation policy (eb22aeca, also Jul 2017), and because
the warning didn't mention the word "deprecated", we never actually
remembered to document it as such. But the warning has been around
long enough that I don't see prolonging it another two releases.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-7-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qcow has no space in the metadata to store a backing format, and there
are existing qcow images backed both by raw or by other formats
(usually qcow) images, reliant on probing to tell the difference. On
the bright side, because we probe every time, raw files are marked as
probed and we thus forbid a commit action into the backing file where
guest-controlled contents could change the result of the probe next
time around (the iotest added here proves that).
Still, allowing the user to specify the backing format during
creation, even if we can't record it, is a good thing. This patch
blindly allows any value that resolves to a known driver, even if the
user's request is a mismatch from what probing finds; then the next
patch will further enhance things to verify that the user's request
matches what we actually probe. With this and the next patch in
place, we will finally be ready to deprecate the creation of images
where a backing format was not explicitly specified by the user.
Note that this is only for QemuOpts usage; there is no change to the
QAPI to allow a format through -blockdev.
Add a new iotest 301 just for qcow, to demonstrate the latest
behavior, and to make it easier to show the improvements made in the
next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
vmdk already requires that if backing_file is present, that it be
another vmdk image (see vmdk_co_do_create). Meanwhile, we want to
move towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
vmdk work, while rejecting all other explicit formats (note that this
is only for QemuOpts usage; there is no change to the QAPI to allow a
format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Sheepdog already requires that if backing_file is present, that it be
another sheepdog image (see sd_co_create). Meanwhile, we want to move
towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
sheepdog work, while rejecting all other explicit formats (note that
this is only for QemuOpts usage; there is no change to the QAPI to
allow a format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-4-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
It's been two releases since we started warning; time to make the
combination an error as promised. There was no iotest coverage, so
add some.
While touching the documentation, tweak another section heading for
consistent style.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
During 'qemu-img create ... 2>&1', if --quiet is not in force, we can
end up with buffered I/O in stdout that was produced before failure,
but which appears in output after failure. This is confusing; the fix
is to flush stdout prior to attempting anything that might produce an
error message. Several iotests demonstrate the resulting ordering
change now that the merged outputs now reflect chronology. (An even
better fix would be to avoid printf from within block.c altogether,
but that's much more invasive...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).
On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.
This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.
For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.
The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.
Without an extent size hint:
$ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 25.848 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 19.616 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 2000000 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m1,279s
user 0m0,043s
sys 0m1,226s
With the new default extent size hint of 1 MB:
$ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 11.833 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 10.155 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 178 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m0,061s
user 0m0,040s
sys 0m0,014s
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The actual disk space used by an image can vary between filesystems and
depending on other settings like an extent size hint. Replace the one
call of "$QEMU_IMG info" and the associated one-off sed filter with the
more standard "_img_info" and the standard filter from common.filter.
Apart from turning "vmdk" into "IMGFMT" and changing the placeholder for
cid fields, this only removes the "disk size" line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Limiting each loop iteration of qemu-img map to 1 GB was arbitrary from
the beginning, though it only cut the maximum in half then because the
interface was a signed 32 bit byte count. These days, bdrv_block_status
supports a 64 bit byte count, so the arbitrary limit is even worse.
On file-posix, bdrv_block_status() eventually maps to SEEK_HOLE and
SEEK_DATA, which don't support a limit, but always do all of the work
necessary to find the start of the next hole/data. Much of this work may
be repeated if we don't use this information fully, but query with an
only slightly larger offset in the next loop iteration. Therefore, if
bdrv_block_status() is called in a loop, it should always pass the
full number of bytes that the whole loop is interested in.
This removes the arbitrary limit and speeds up 'qemu-img map'
significantly on heavily fragmented images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707144629.51235-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Not only is it a bit stupid to try to filter multi-line "Formatting"
output (because we only need it for a single test, which can easily be
amended to no longer need it), it is also problematic when there can be
output after a "Formatting" line that we do not want to filter as if it
were part of it.
So rename _filter_img_create to _do_filter_img_create, let it filter
only a single line, and let _filter_img_create loop over all input
lines, calling _do_filter_img_create only on those that match
/^Formatting/ (basically, what _filter_img_create_in_qmp did already).
(And fix 020 to work with that.)
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200709110205.310942-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
NBD patches for 2020-07-13
- fix off-by-one truncation in corner-case name display
- use fcntl correctly
- iotest cleanups that enable testing an upcoming fix for NBD close
# gpg: Signature made Mon 13 Jul 2020 15:11:35 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-07-13:
iotests.py: filter_testfiles(): filter SOCK_DIR too
iotests.py: QemuIoInteractive: print output on failure
iotests: QemuIoInteractive: use qemu_io_args_no_fmt
hax: Fix setting of FD_CLOEXEC
nbd: Avoid off-by-one in long export name truncation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
print_syscall_err() relies on the sign of the returned value to know
if it is an errno value or not.
But in some cases the returned value can have the most signicant bit
set without being an errno.
This patch restores previous behaviour that was also checking if
we can decode the errno to validate it.
This patch fixes this kind of problem (qemu-m68k):
root@sid:/# QEMU_STRACE= ls
3 brk(NULL) = -1 errno=21473607683 uname(0x407fff8a) = 0
to become:
root@sid:/# QEMU_STRACE= ls
3 brk(NULL) = 0x8001e000
3 uname(0xffffdf8a) = 0
Fixes: c84be71f6854 ("linux-user: Extend strace support to enable argument printing after syscall execution")
Cc: Filip.Bozuta@syrmia.com
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200708152435.706070-3-laurent@vivier.eu>
|
|
errno of the target is returned as a negative value by the syscall,
not in the host errno variable.
The emulation of the target syscall can return an error while the
host doesn't set an errno value. Target errnos and host errnos can
also differ in some cases.
Fixes: c84be71f6854 ("linux-user: Extend strace support to enable argument printing after syscall execution")
Cc: Filip.Bozuta@syrmia.com
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Message-Id: <20200708152435.706070-2-laurent@vivier.eu>
|
|
The end address calculation for NA4 mode is wrong because the address
used isn't shifted.
It doesn't watch 4 bytes but a huge range because the end address
calculation is wrong.
The solution is to use the shifted address calculated for start address
variable.
Modifications are tested on Zephyr OS userspace test suite which works
for other RISC-V boards (E31 and E34 core).
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200706084550.24117-1-amergnat@baylibre.com
Message-Id: <20200706084550.24117-1-amergnat@baylibre.com>
[ Changes by AF:
- Improve the commit title and message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1594600421-22942-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com
Message-Id: <06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com>
|
|
Conver the Ibex UART to use the recently added qdev-clock functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com
Message-Id: <b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com>
|
|
vill bit is at vtype[XLEN-1].
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
do_opivx_widen() should return false if check function returns false.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
gvec should provide vecop_list to avoid:
"tcg_tcg_assert_listed_vecop: code should not be reached bug" assertion.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200710104920.13550-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
At present the size of Mask ROM for sifive_u / spike / virt machines
is set to 0x11000, which ends at an unusual address. This changes the
size to 0xf000 so that it ends at 0x10000.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1594289144-24723-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Even though the start address in ROM code is declared as a 64 bit address
for RV64, it can't be used as upper bits are set to zero in ROM code.
Update the ROM code correctly to reflect the 64bit value.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-5-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
OpenSBI is the default firmware in Qemu and has various firmware loading
options. Currently, qemu loader uses fw_jump which has a compile time
pre-defined address where fdt & kernel image must reside. This puts a
constraint on image size of the Linux kernel depending on the fdt location
and available memory. However, fw_dynamic allows the loader to specify
the next stage location (i.e. Linux kernel/U-Boot) in memory and other
configurable boot options available in OpenSBI.
Add support for OpenSBI dynamic firmware loading support. This doesn't
break existing setup and fw_jump will continue to work as it is. Any
other firmware will continue to work without any issues as long as it
doesn't expect anything specific from loader in "a2" register.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-4-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Currently, the fdt is copied to the ROM after the reset vector. The firmware
has to copy it to DRAM. Instead of this, directly copy the device tree to a
pre-computed dram address. The device tree load address should be as far as
possible from kernel and initrd images. That's why it is kept at the end of
the DRAM or 4GB whichever is lesser.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-3-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Currently, all riscv machines except sifive_u have identical reset vector
code implementations with memory addresses being different for all machines.
They can be easily combined into a single function in common code.
Move it to common function and let all the machines use the common function.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-2-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Adjust the PCIe memory maps to follow the order.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1593746511-19517-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
List me as the maintainer for OpenSBI firmware related files.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1593177220-28143-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Problem with g_get_host_name() is that on the first call it saves
the hostname into a global variable and from then on, every
subsequent call returns the saved hostname. Even if the hostname
changes. This doesn't play nicely with guest agent, because if
the hostname is acquired before the guest is set up (e.g. on the
first boot, or before DHCP) we will report old, invalid hostname.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1845127
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This function offers operating system agnostic way to fetch host
name. It is implemented for both POSIX-like and Windows systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Since commit 781f2b3d1e ("qga: process_event() simplification"),
send_response() is called unconditionally, but will assert when "rsp" is
NULL. This may happen with QCO_NO_SUCCESS_RESP commands, such as
"guest-shutdown".
Fixes: 781f2b3d1e5ef389b44016a897fd55e7a780bf35
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
On one hand "guest-fsfreeze-freeze" command, "COM+ System Application service" is
stopped, on the other hand "guest-fsfreeze-thaw" stops QGA VSS Provider service from
"COM+ Application Admin Catalog".
Invoking a series of freeze and thaw commands may result in QGA failing to stop
VSS Provider service as "COM+ System Application service" is stopped, which can
cause some delay in qga response.
In this commit StopService function was changed and VSS Provider service is now
stopped using Winsvc library API.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1549425
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This command is needed to be able to boot systemd in a container.
$ sudo systemd-nspawn -D /chroot/armhf/sid/ -b
Spawning container sid on /chroot/armhf/sid.
Press ^] three times within 1s to kill container.
systemd 245.6-2 running in system mode.
Detected virtualization systemd-nspawn.
Detected architecture arm.
Welcome to Debian GNU/Linux bullseye/sid!
Set hostname to <virt-arm>.
Failed to enqueue loopback interface start request: Operation not supported
Caught <SEGV>, dumped core as pid 3.
Exiting PID 1...
Container sid failed with error code 255.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200709072332.890440-2-laurent@vivier.eu>
|
|
Only implement IFLA_PERM_ADDRESS to fix the following error:
Unknown host QEMU_IFLA type: 54
The couple of other ones, IFLA_PROP_LIST and IFLA_ALT_IFNAME, have
been introduced to be used with RTM_NEWLINKPROP, RTM_DELLINKPROP and
RTM_GETLINKPROP that are not implemented by QEMU.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200709072332.890440-1-laurent@vivier.eu>
|
|
In new functions print_ioctl() and print_syscall_ret_ioctl(), we don't
check if lock_user() returns NULL and this would cause a segfault in
thunk_print().
If lock_user() returns NULL don't call thunk_print() but prints only the
value of the (invalid) pointer.
Tested with:
# cat ioctl.c
#include <unistd.h>
#include <sys/ioctl.h>
int main(void)
{
int ret;
ret = ioctl(STDOUT_FILENO, TCGETS, 0xdeadbeef);
ret = ioctl(STDOUT_FILENO, TCSETSF, 0xdeadbeef);
return 0;
}
# QEMU_STRACE= ./ioctl
...
578 ioctl(1,TCGETS,0xdeadbeef) = -1 errno=2 (Bad address)
578 ioctl(1,TCSETSF,0xdeadbeef) = -1 errno=2 (Bad address)
...
# QEMU_STRACE= passwd
...
623 ioctl(0,TCGETS,0x3fffed04) = 0 ({})
623 ioctl(0,TCSETSF,{}) = 0
...
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 79482e5987c8 ("linux-user: Add strace support for printing arguments of ioctl()")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Refactoring ipc syscall for s390x and SPARC, so it matches glibc implementation
We should add support of semtimedop syscall as new version of glibc
2.31 uses semop based on semtimedop
(commit: https://gitlab.com/freedesktop-sdk/mirrors/sourceware/glibc/-/commit/765cdd0bffd77960ae852104fc4ea5edcdb8aed3 ).
Signed-off-by: Matus Kysel <mkysel@tachyum.com>
Message-Id: <20200626124612.58593-2-mkysel@tachyum.com>
Message-Id: <20200626124612.58593-3-mkysel@tachyum.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
[lv: merged PATCH 1 & 2 to avoid build break on PATCH 1]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Linux uses the EPROTONOSUPPORT error code[1] if the users requests a
netlink socket with an unsupported netlink protocol. This change
switches linux-user to use the same code as Linux, instead of
EPFNOSUPPORT (which AFAIK is just an anachronistic version of
EAFNOSUPPORT).
Tested by compiling all linux-user targets on x86.
[1]:
https://github.com/torvalds/linux/blob/bfe91da29bfad9941d5d703d45e29f0812a20724/net/netlink/af_netlink.c#L683
Signed-off-by: Josh Kunz <jkz@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200707001036.1671982-1-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
qemu_fclose() could return error, f.e. if bdrv_co_flush() will return
the error.
This validation will become more important once we will start waiting of
asynchronous IO operations, started from bdrv_write_vmstate(), which are
coming soon.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Juan Quintela <quintela@redhat.com>
CC: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
"tmp.tls_hostname" and "tmp.tls_creds" allocated by migrate_params_test_apply()
is forgot to free at the end of qmp_migrate_set_parameters(). Fix that.
The leak stack:
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac52447fb in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1377)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c:165)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef(/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac5244893 in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1382)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef (/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: KeQian Zhu <zhukeqian1@huawei.com>
Reviewed-by: HaiLiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
'remotes/kraxel/tags/fixes-20200713-pull-request' into staging
bugfixes for audio, usb, ui and docs.
# gpg: Signature made Mon 13 Jul 2020 15:10:35 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/fixes-20200713-pull-request:
usb: fix usb-host build on windows.
ui: fix vc_chr_write call in text_console_do_init
docs/qdev-device-use: Clean up the sentences related to -usbdevice
ossaudio: fix out of bounds write
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/pmaydell/tags/pull-target-arm-20200713' into staging
target-arm queue:
* hw/arm/bcm2836: Remove unused 'cpu_type' field
* target/arm: Fix mtedesc for do_mem_zpz
* Add the ability to change the FEC PHY MDIO device number on i.MX25/i.MX6/i.MX7
* target/arm: Don't do raw writes for PMINTENCLR
* virtio-iommu: Fix coverity issue in virtio_iommu_handle_command()
* build: Fix various issues with building on Haiku
* target/nios2: fix wrctl behaviour when using icount
* hw/arm/tosa: Encapsulate misc GPIO handling in a device
* hw/arm/palm.c: Encapsulate misc GPIO handling in a device
* hw/arm/aspeed: Do not create and attach empty SD cards by default
# gpg: Signature made Mon 13 Jul 2020 15:08:16 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200713: (25 commits)
hw/arm/aspeed: Do not create and attach empty SD cards by default
hw/arm/palm.c: Encapsulate misc GPIO handling in a device
hw/arm/palm.c: Detabify
hw/arm/tosa: Encapsulate misc GPIO handling in a device
hw/arm/tosa.c: Detabify
hw/nios2: exit to main CPU loop only when unmasking interrupts
target/nios2: Use gen_io_start around wrctl instruction
target/nios2: in line the semantics of DISAS_UPDATE with other targets
target/nios2: add DISAS_NORETURN case for nothing more to generate
util/drm: make portable by avoiding struct dirent d_type
util/oslib-posix.c: Implement qemu_init_exec_dir() for Haiku
util/compatfd.c: Only include <sys/syscall.h> if CONFIG_SIGNALFD
bswap.h: Include <endian.h> on Haiku for bswap operations
osdep.h: For Haiku, define SIGIO as equivalent to SIGPOLL
osdep.h: Always include <sys/signal.h> if it exists
build: Check that mlockall() exists
util/qemu-openpty.c: Don't assume pty.h is glibc-only
build: Enable BSD symbols for Haiku
virtio-iommu: Fix coverity issue in virtio_iommu_handle_command()
target/arm: Don't do raw writes for PMINTENCLR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200701105331.121670-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Make it simpler to debug when qemu-io fails due to wrong arguments or
environment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200701105331.121670-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The only user (iotest 205) of QemuIoInteractive provides -f argument,
so it's a bit inefficient to use qemu_io_args, which contains -f too.
And we are going to add one more test, which wants to specify -f by
hand. Let's use qemu_io_args_no_fmt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200701105331.121670-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Blindly setting FD_CLOEXEC without a read-modify-write will
inadvertently clear any other intentionally-set bits, such as a
proposed new bit for designating a fd that must behave in 32-bit mode.
Use our wrapper function instead of an incorrect hand-rolled version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200420175309.75894-2-eblake@redhat.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
|
