aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-05target/arm: Honor the HCR_EL2.TACR bitRichard Henderson
This bit traps EL1 access to the auxiliary control registers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Honor the HCR_EL2.TSW bitRichard Henderson
These bits trap EL1 access to set/way cache maintenance insns. Buglink: https://bugs.launchpad.net/bugs/1863685 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Honor the HCR_EL2.{TVM,TRVM} bitsRichard Henderson
These bits trap EL1 access to various virtual memory controls. Buglink: https://bugs.launchpad.net/bugs/1855072 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Improve masking in arm_hcr_el2_effRichard Henderson
Update the {TGE,E2H} == '11' masking to ARMv8.6. If EL2 is configured for aarch32, disable all of the bits that are RES0 in aarch32 mode. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Remove EL2 and EL3 setup from user-onlyRichard Henderson
We have disabled EL2 and EL3 for user-only, which means that these registers "don't exist" and should not be set. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Disable has_el2 and has_el3 for user-onlyRichard Henderson
In arm_cpu_reset, we configure many system registers so that user-only behaves as it should with a minimum of ifdefs. However, we do not set all of the system registers as required for a cpu with EL2 and EL3. Disabling EL2 and EL3 mean that we will not look at those registers, which means that we don't have to worry about configuring them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Add HCR_EL2 bit definitions from ARMv8.6Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Improve masking of HCR/HCR2 RES0 bitsRichard Henderson
Don't merely start with v8.0, handle v7VE as well. Ensure that writes from aarch32 mode do not change bits in the other half of the register. Protect reads of aa64 id registers with ARM_FEATURE_AARCH64. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/timer/cadence_ttc: move timer_new from init() into realize() to avoid ↵Pan Nengyuan
memleaks There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200227025055.14341-7-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaksPan Nengyuan
There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-5-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/spitz: move timer_new from init() into realize() to avoid memleaksPan Nengyuan
There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-4-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaksPan Nengyuan
There are some memleaks when we call 'device_list_properties'. This patch move timer_new from init into realize to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-id: 20200227025055.14341-3-pannengyuan@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/musicpal: Simplify since the machines are little-endian onlyPhilippe Mathieu-Daudé
We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/z2: Simplify since the machines are little-endian onlyPhilippe Mathieu-Daudé
We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/omap_sx1: Simplify since the machines are little-endian onlyPhilippe Mathieu-Daudé
We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/mainstone: Simplify since the machines are little-endian onlyPhilippe Mathieu-Daudé
We only build the little-endian softmmu configurations. Checking for big endian is pointless, remove the unused code. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/gumstix: Simplify since the machines are little-endian onlyPhilippe Mathieu-Daudé
As the Connex and Verdex machines only boot in little-endian, we can simplify the code. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logicPhilippe Mathieu-Daudé
The smmu_find_smmu_pcibus() function was introduced (in commit cac994ef43b) in a code format that could return an incorrect pointer, which was then fixed by the previous commit. We could have avoided this by writing the if() statement differently. Do it now, in case this function is re-used. The code is easier to review (harder to miss bugs). Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm/smmu-common: a fix to smmu_find_smmu_pcibusEric Auger
Make sure a null SMMUPciBus is returned in case we were not able to identify a pci bus matching the @bus_num. This matches the fix done on intel iommu in commit: a2e1cd41ccfe796529abfd1b6aeb1dd4393762a2 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20200226172628.17449-1-eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05target/arm: Implement (trivially) ARMv8.2-TTCNPPeter Maydell
The ARMv8.2-TTCNP extension allows an implementation to optimize by sharing TLB entries between multiple cores, provided that software declares that it's ready to deal with this by setting a CnP bit in the TTBRn_ELx. It is mandatory from ARMv8.2 onward. For QEMU's TLB implementation, sharing TLB entries between different cores would not really benefit us and would be a lot of work to implement. So we implement this extension in the "trivial" manner: we allow the guest to set and read back the CnP bit, but don't change our behaviour (this is an architecturally valid implementation choice). The only code path which looks at the TTBRn_ELx values for the long-descriptor format where the CnP bit is defined is already doing enough masking to not get confused when the CnP bit at the bottom of the register is set, so we can simply add a comment noting why we're relying on that mask. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200225193822.18874-1-peter.maydell@linaro.org
2020-03-05hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodesEdgar E. Iglesias
Generate xlnx-versal-virt zdma FDT nodes. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05hw/arm: versal: Add support for the LPD ADMAsEdgar E. Iglesias
Add support for the Versal LPD ADMAs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-05' into ↵Peter Maydell
staging QAPI patches for 2020-03-05 # gpg: Signature made Thu 05 Mar 2020 12:42:15 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-03-05: qapi: Brush off some (py)lint qapi: Use super() now we have Python 3 qapi: Drop conditionals for Python 2 qapi: Inheriting from object is pointless with Python 3, drop Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-040320-1' ↵Peter Maydell
into staging Testing updates - some clean-ups for tests/vm - enable tools build for MacOSX - bump avocado to a newer version - bump travis env for avocado # gpg: Signature made Wed 04 Mar 2020 10:00:19 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-040320-1: travis.yml: install python3 numpy and opencv libraries tests/acceptance: bump avocado requirements to 76.0 configure: detect and report genisoimage travis: enable tools build on OS X tests/vm: Added gen_cloud_init_iso() to basevm.py tests/vm: give wait_ssh() option to wait for root tests/vm: increased max timeout for vm boot. tests/vm: Debug mode shows ssh output. tests/vm: use $(PYTHON) consistently Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05qapi: Brush off some (py)lintMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200304155932.20452-5-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2020-03-05qapi: Use super() now we have Python 3Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200304155932.20452-4-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2020-03-05qapi: Drop conditionals for Python 2Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200304155932.20452-3-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2020-03-05qapi: Inheriting from object is pointless with Python 3, dropMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200304155932.20452-2-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2020-03-04travis.yml: install python3 numpy and opencv librariesAlex Bennée
These are used for the acceptance framebuffer tests to count Tux. As we need slightly newer python3 for opencv we bump up to bionic. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200303150622.20133-10-alex.bennee@linaro.org>
2020-03-04tests/acceptance: bump avocado requirements to 76.0Alex Bennée
If we want to use @skipUnless decorations on the class we need a newer version of avocado. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200303150622.20133-9-alex.bennee@linaro.org>
2020-03-04configure: detect and report genisoimageAlex Bennée
This is used for some of the vm-build tests so lets detect it and behave sanely when it is not installed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
2020-03-04travis: enable tools build on OS XLaurent Vivier
As we can build tools on OS X we should check we don't break build when we submit new codes. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200302154630.45620-3-lvivier@redhat.com> Message-Id: <20200303150622.20133-7-alex.bennee@linaro.org>
2020-03-04tests/vm: Added gen_cloud_init_iso() to basevm.pyRobert Foley
This method was located in both centos and ubuntu.i386. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200219163537.22098-6-robert.foley@linaro.org> Message-Id: <20200303150622.20133-6-alex.bennee@linaro.org>
2020-03-04tests/vm: give wait_ssh() option to wait for rootRobert Foley
Allow wait_ssh to wait for root user to be ready. This solves the issue where we perform a wait_ssh() successfully, but the root user is not yet ready to be logged in. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200219163537.22098-5-robert.foley@linaro.org> Message-Id: <20200303150622.20133-5-alex.bennee@linaro.org>
2020-03-04tests/vm: increased max timeout for vm boot.Robert Foley
Add change to increase timeout waiting for VM to boot. Needed for some emulation cases where it can take longer than 5 minutes to boot. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200219163537.22098-4-robert.foley@linaro.org> Message-Id: <20200303150622.20133-4-alex.bennee@linaro.org>
2020-03-04tests/vm: Debug mode shows ssh output.Robert Foley
Add changes to tests/vm/basevm.py so that during debug mode we show ssh output. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200219163537.22098-3-robert.foley@linaro.org> Message-Id: <20200303150622.20133-3-alex.bennee@linaro.org>
2020-03-04tests/vm: use $(PYTHON) consistentlyRobert Foley
Change Makefile.include to use $(PYTHON) so for vm-boot-ssh to be consistent with other cases like vm-build. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Puhov <peter.puhov@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200219163537.22098-2-robert.foley@linaro.org> Message-Id: <20200303150622.20133-2-alex.bennee@linaro.org>
2020-03-03Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200303' into staging Virtiofsd pull 2020-03-03 xattr fixes from Misono. # gpg: Signature made Tue 03 Mar 2020 15:15:04 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20200303: virtiofsd: Fix xattr operations virtiofsd: passthrough_ll: cleanup getxattr/listxattr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-03virtiofsd: Fix xattr operationsMisono Tomohiro
Current virtiofsd has problems about xattr operations and they does not work properly for directory/symlink/special file. The fundamental cause is that virtiofsd uses openat() + f...xattr() systemcalls for xattr operation but we should not open symlink/special file in the daemon. Therefore the function is restricted. Fix this problem by: 1. during setup of each thread, call unshare(CLONE_FS) 2. in xattr operations (i.e. lo_getxattr), if inode is not a regular file or directory, use fchdir(proc_loot_fd) + ...xattr() + fchdir(root.fd) instead of openat() + f...xattr() (Note: for a regular file/directory openat() + f...xattr() is still used for performance reason) With this patch, xfstests generic/062 passes on virtiofs. This fix is suggested by Miklos Szeredi and Stefan Hajnoczi. The original discussion can be found here: https://www.redhat.com/archives/virtio-fs/2019-October/msg00046.html Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Message-Id: <20200227055927.24566-3-misono.tomohiro@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-03virtiofsd: passthrough_ll: cleanup getxattr/listxattrMisono Tomohiro
This is a cleanup patch to simplify the following xattr fix and there is no functional changes. - Move memory allocation to head of the function - Unify fgetxattr/flistxattr call for both size == 0 and size != 0 case - Remove redundant lo_inode_put call in error path (Note: second call is ignored now since @inode is already NULL) Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Message-Id: <20200227055927.24566-2-misono.tomohiro@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-03Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 03 Mar 2020 10:06:06 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: (23 commits) l2tpv3: fix RFC number typo in qemu-options.hx colo: Update Documentation for continuous replication net/filter.c: Add Options to insert filters anywhere in the filter list tests/test-replication.c: Add test for for secondary node continuing replication block/replication.c: Ignore requests after failover hw: net: cadence_gem: Fix build errors in DB_PRINT() NetRxPkt: fix hash calculation of IPV6 TCP NetRxPkt: Introduce support for additional hash types e1000e: Avoid hw_error if legacy mode used dp8393x: Don't stop reception upon RBE interrupt assertion dp8393x: Don't reset Silicon Revision register dp8393x: Always update RRA pointers and sequence numbers dp8393x: Clear descriptor in_use field to release packet dp8393x: Pad frames to word or long word boundary dp8393x: Use long-word-aligned RRA pointers in 32-bit mode dp8393x: Don't clobber packet checksum dp8393x: Implement packet size limit and RBAE interrupt dp8393x: Clear RRRA command register bit only when appropriate dp8393x: Update LLFA and CRDA registers from rx descriptor dp8393x: Have dp8393x_receive() return the packet size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-03Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf3' ↵Peter Maydell
into staging RISC-V Patches for the 5.0 Soft Freeze, Part 3 This pull request is almost entirely an implementation of the draft hypervisor extension. This extension is still in draft and is expected to have incompatible changes before being frozen, but we've had good luck managing other RISC-V draft extensions in QEMU so far. Additionally, there's a fix to PCI addressing and some improvements to the M-mode timer. This boots linux and passes make check for me. # gpg: Signature made Tue 03 Mar 2020 00:23:20 GMT # gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889 # gpg: issuer "palmer@dabbelt.com" # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 # Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889 * remotes/palmer/tags/riscv-for-master-5.0-sf3: (38 commits) hw/riscv: Provide rdtime callback for TCG in CLINT emulation target/riscv: Emulate TIME CSRs for privileged mode riscv: virt: Allow PCI address 0 target/riscv: Allow enabling the Hypervisor extension target/riscv: Add the MSTATUS_MPV_ISSET helper macro target/riscv: Add support for the 32-bit MSTATUSH CSR target/riscv: Set htval and mtval2 on execptions target/riscv: Raise the new execptions when 2nd stage translation fails target/riscv: Implement second stage MMU target/riscv: Allow specifying MMU stage target/riscv: Respect MPRV and SPRV for floating point ops target/riscv: Mark both sstatus and msstatus_hs as dirty target/riscv: Disable guest FP support based on virtual status target/riscv: Only set TB flags with FP status if enabled target/riscv: Remove the hret instruction target/riscv: Add hfence instructions target/riscv: Add Hypervisor trap return support target/riscv: Add hypvervisor trap support target/riscv: Generate illegal instruction on WFI when V=1 target/ricsv: Flush the TLB on virtulisation mode changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-03l2tpv3: fix RFC number typo in qemu-options.hxStefan Hajnoczi
The L2TPv3 RFC number is 3931: https://tools.ietf.org/html/rfc3931 Reported-by: Henrik Johansson <henrikjohansson@rocketmail.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03colo: Update Documentation for continuous replicationLukas Straub
Document the qemu command-line and qmp commands for continuous replication Signed-off-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03net/filter.c: Add Options to insert filters anywhere in the filter listLukas Straub
To switch the Secondary to Primary, we need to insert new filters before the filter-rewriter. Add the options insert= and position= to be able to insert filters anywhere in the filter list. position should be "head" or "tail" to insert at the head or tail of the filter list or it should be "id=<id>" to specify the id of another filter. insert should be either "before" or "behind" to specify where to insert the new filter relative to the one specified with position. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03tests/test-replication.c: Add test for for secondary node continuing replicationLukas Straub
This simulates the case that happens when we resume COLO after failover. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03block/replication.c: Ignore requests after failoverLukas Straub
After failover the Secondary side of replication shouldn't change state, because it now functions as our primary disk. In replication_start, replication_do_checkpoint, replication_stop, ignore the request if current state is BLOCK_REPLICATION_DONE (sucessful failover) or BLOCK_REPLICATION_FAILOVER (failover in progres i.e. currently merging active and hidden images into the base image). Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Acked-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03hw: net: cadence_gem: Fix build errors in DB_PRINT()Bin Meng
When CADENCE_GEM_ERR_DEBUG is turned on, there are several compilation errors in DB_PRINT(). Fix them. While we are here, update to use appropriate modifiers in the same DB_PRINT() call. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03NetRxPkt: fix hash calculation of IPV6 TCPYuri Benditovich
When requested to calculate the hash for TCPV6 packet, ignore overrides of source and destination addresses in in extension headers. Use these overrides when new hash type NetPktRssIpV6TcpEx requested. Use this type in e1000e hash calculation for IPv6 TCP, which should take in account overrides of the addresses. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03NetRxPkt: Introduce support for additional hash typesYuri Benditovich
Add support for following hash types: IPV6 TCP with extension headers IPV4 UDP IPV6 UDP IPV6 UDP with extension headers Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:10:25 +0000