aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-13qga: distinguish binary modes in "guest_file_open_modes" mapLaszlo Ersek
In Windows guests this may make a difference. Since the original patch (commit c689b4f1) sought to be pedantic and to consider theoretical corner cases of portability, we should fix it up where it failed to come through in that pursuit. Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-05-10target-i386: ROR r8/r16 imm instruction fixAurelien Jarno
Fix EFLAGS corruption by ROR r8/r16 imm instruction located at the end of the TB, similarly to commit 089305ac for the non-immediate case. Reported-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-09tcg/optimize: fix setcond2 optimizationAurelien Jarno
When setcond2 is rewritten into setcond, the state of the destination temp should be reset, so that a copy of the previous value is not used instead of the result. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08Update version for 1.5.0-rc1v1.5.0-rc1Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Kevin Wolf (7) and Fam Zheng (3) # Via Kevin Wolf * kwolf/for-anthony: qemu-iotests: fix 017 018 for vmdk qemu-iotests: exclude vmdk and qcow from 043 qemu-iotests: exclude vmdk for test 042 qtest/ide-test: Test short and long PRDTs qtest/ide-test: Add simple DMA read/write test case qtest: Add IDE test case libqos/pci: Enable bus mastering ide: Reset BMIDEA bit when the bus master is stopped de_DE.po: Add missing leading spaces ahci: Don't allow creating slave drives Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08virtio: properly validate address before accessing configJason Wang
There are several several issues in the current checking: - The check was based on the minus of unsigned values which can overflow - It was done after .{set|get}_config() which can lead crash when config_len is zero since vdev->config is NULL Fix this by: - Validate the address in virtio_pci_config_{read|write}() before .{set|get}_config - Use addition instead minus to do the validation Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Petr Matousek <pmatouse@redhat.com> Message-id: 1367905369-10765-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08virtio-pci: fix level interruptsMichael S. Tsirkin
mask notifiers are never called without msix, so devices with backend masking like vhost don't work. Call mask notifiers explicitly at startup/cleanup to make it work. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08Merge branch 'ppc-for-upstream' of git://github.com/agraf/qemuAurelien Jarno
* 'ppc-for-upstream' of git://github.com/agraf/qemu: PPC: Depend behavior of cmp instructions only on instruction encoding
2013-05-08PPC: Fix rldclAlexander Graf
The implementation for rldcl tried to always fetch its parameters from the opcode, even though the opcode was already passed in in decoded and different forms. Use the parameters instead, fixing rldcl. Reported-by: Torbjorn Granlund <tg@gmplib.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-08PPC: Depend behavior of cmp instructions only on instruction encodingAlexander Graf
When running an L=1 cmp instruction on a 64bit PPC CPU with SF off, it still behaves identical to what it does when SF is on. Remove the implicit difference in the code. Also, on most 32bit CPUs we should always treat the compare as 32bit compare, as the CPU will ignore the L bit. This is not true for e500mc, but that's up for a different patch. Reported-by: Torbjorn Granlund <tg@gmplib.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-08target-mips: fix incorrect behaviour for INSVPetar Jovanovic
Corner case for INSV instruction when size=32 has not been correctly implemented. The mask for size should be one bit wider, and preparing the filter variable should be aware of this case too. The test for INSV has been extended to include the case that triggers the bug. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08target-mips: add missing check_dspr2 for multiply instructionsPetar Jovanovic
The emulator needs to check in hflags if DSP unit has been turned off before it generates code for MUL_PH, MUL_S_PH, MULQ_S_W, and MULQ_RS_W. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08qemu-iotests: fix 017 018 for vmdkFam Zheng
017 and 018 use /bin/mv to move base img from t.IMGFMG to t.IMGFMT.base after filling data, this is not enough for vmdk, when t.IMGFMT is only a description text file who points to t-{flat,s001,f001,...}.IMGFMT as data extent, so testing such subformats alway fails on them. This patch use the trick of temprorily changing TEST_IMG to avoid using /bin/mv. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qemu-iotests: exclude vmdk and qcow from 043Fam Zheng
043 tests recursive backing file by changing backing file. VMDK has not implemented this yet, and qcow1 probably never will. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qemu-iotests: exclude vmdk for test 042Fam Zheng
Zero sized disk is not supported by qemu vmdk driver, exclude vmdk from the test script. As tested on vmware-vdiskmanager and vmware workstation, zero sized disk is not supported by vmware, either. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qtest/ide-test: Test short and long PRDTsKevin Wolf
This tests the behaviour of the DMA engine when the given PRDT contains physical region descriptors for either more or less bytes than the IDE request is for. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qtest/ide-test: Add simple DMA read/write test caseKevin Wolf
This tests that single sectors can be successfully written and correctly read back. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qtest: Add IDE test caseKevin Wolf
This adds a simple IDE test case and starts by verifying that IDENTIFY can be successfully used and return the correct serial number, version and the WCE flag is set for cache=writeback. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08libqos/pci: Enable bus masteringKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08ide: Reset BMIDEA bit when the bus master is stoppedKevin Wolf
The device is supposed to reset the Bus Master IDE Active bit in the status register when 0 is written to the Start/Stop Bus Master bit in the command register. In the common cases this happens automatically because bdrv_drain_all() flushes the requests, but with a large PRDT it could remain set. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08de_DE.po: Add missing leading spacesKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08ahci: Don't allow creating slave drivesKevin Wolf
An IDE bus provided by AHCI can only take a single IDE drive. If you add a drive as slave, qemu used to accept the command line but the device wouldn't be actually usable. Catch the situation instead and error out. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-07Update version for qemu-1.5.0-rc0v1.5.0-rc0Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07Merge remote-tracking branch 'kraxel/usb.82' into stagingAnthony Liguori
# By Gerd Hoffmann (3) and Hans de Goede (1) # Via Gerd Hoffmann * kraxel/usb.82: xhci: handle USB_RET_BABBLE uhci: Use an intermediate buffer for usb packet data usb-host: add usb_host_full_speed_compat usb-host: live migration support for the libusb version Message-id: 1367920207-1404-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07qga: set umask 0077 when daemonizing (CVE-2013-2007)Laszlo Ersek
The qemu guest agent creates a bunch of files with insecure permissions when started in daemon mode. For example: -rw-rw-rw- 1 root root /var/log/qemu-ga.log -rw-rw-rw- 1 root root /var/run/qga.state -rw-rw-rw- 1 root root /var/log/qga-fsfreeze-hook.log In addition, at least all files created with the "guest-file-open" QMP command, and all files created with shell output redirection (or otherwise) by utilities invoked by the fsfreeze hook script are affected. For now mask all file mode bits for "group" and "others" in become_daemon(). Temporarily, for compatibility reasons, stick with the 0666 file-mode in case of files newly created by the "guest-file-open" QMP call. Do so without changing the umask temporarily. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07virtio-net: properly check the vhost status during status setJason Wang
Commit 32993698 (vhost: disable on tap link down) tries to disable the vhost also when the peer's link is down. But the check was not done properly, the vhost were only started when: 1) peer's link is not down 2) virtio-net has already been started. Since == have a higher precedence than &&, place a brace to make sure both the conditions were met then does the check. This fixes the crash when doing a savem after set the link off which let qemu crash and complains: virtio_net_save: Assertion `!n->vhost_started' failed. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1366972060-21606-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-07Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
# By Eduardo Habkost (6) and others # Via Andreas Färber * afaerber/qom-cpu: target-i386: n270 can MOVBE target-i386: Introduce generic CPUID feature compat function target-i386: Change CPUID model of 486 to 8 target-i386: Emulate X86CPU subclasses for global properties qdev: Introduce qdev_prop_set_globals_for_type() qdev: Let qdev_prop_parse() pass through Error target-i386: Add "filtered-features" property to X86CPU target-i386: Introduce X86CPU::filtered_features field target-i386: Add "feature-words" property to X86CPU target-i386: Use FeatureWord loop on filter_features_for_kvm() target-i386: Add ECX information to FeatureWordInfo
2013-05-07xhci: handle USB_RET_BABBLEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07uhci: Use an intermediate buffer for usb packet dataHans de Goede
Due to various unfortunate reasons we cannot reliable detect a guest cancelling a packet as soon as it happens, instead we detect cancels with some delay. When packets are handled async, and we directly pass the guest memory for the packet to the usb-device as iovec, this means that the usb-device can write to guest-memory which the guest has already re-used for other purposes -> not good! This patch fixes this by adding an intermediate buffer and writing back not only the result, but also the data, of async completed packets when scanning the schedule. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: add usb_host_full_speed_compatGerd Hoffmann
Alloes to pass through usb2 devices on usb1 host controllers if possible. Brings the libusb implementation to feature-parity with the linux usbfs code, so the usb-host implementation in 1.5 (libusb) doesn't regress compared to 1.4 (usbfs). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: live migration support for the libusb versionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-06Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
# By Marcelo Tosatti # Via Gleb Natapov * qemu-kvm/uq/master: kvmvapic: add ioport read accessor Message-id: cover.1367844188.git.gleb@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-06target-i386: n270 can MOVBEBorislav Petkov
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is needed when booting 3.8 and later linux kernels built with the MATOM target because we require MOVBE in order to boot properly now. Signed-off-by: Borislav Petkov <bp@suse.de> [ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Introduce generic CPUID feature compat functionEduardo Habkost
Introduce x86_cpu_compat_set_features(), that can be used to set/unset feature bits on specific CPU models for machine-type compatibility. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06Merge branch 's390-for-upstream' of git://github.com/agraf/qemuAurelien Jarno
* 's390-for-upstream' of git://github.com/agraf/qemu: s390: update s390-ccw.img S390: BIOS boot from given device S390: Add virtio-blk boot S390: Merging s390_ipl_cpu and s390_ipl_reset S390: BIOS create link to src folder for .img file S390: BIOS check for file
2013-05-06target-i386: Change CPUID model of 486 to 8Andreas Färber
This changes the model number of 486 to 8 (DX4) which matches the feature set presented, and actually has the CPUID instruction. This adds a compatibility property, to keep model=0 on pc-*-1.4 and older. Signed-off-by: H. Peter Anvin <hpa@zytor.com> [AF: Add compat_props entry] Tested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Emulate X86CPU subclasses for global propertiesAndreas Färber
After initializing the object from its x86_def_t and before setting any additional -cpu arguments, set any global properties for the designated subclass <name>-{i386,x86_64}-cpu. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06qdev: Introduce qdev_prop_set_globals_for_type()Andreas Färber
Reuse it in qdev_prop_set_globals(). Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [AF: Renamed from qdev_prop_set_custom_globals()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06qdev: Let qdev_prop_parse() pass through ErrorAndreas Färber
Move error reporting to callers. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Add "filtered-features" property to X86CPUEduardo Habkost
This property will contain all the features that were removed from the CPU because they are not supported by the host. This way, libvirt or other management tools can emulate the check/enforce behavior by checking if filtered-properties is all zeroes, before starting the guest. Example output where some features were missing: $ qemu-system-x86_64 -enable-kvm -cpu Haswell,check -S \ -qmp unix:/tmp/m,server,nowait warning: host doesn't support requested feature: CPUID.01H:ECX.fma [bit 12] warning: host doesn't support requested feature: CPUID.01H:ECX.movbe [bit 22] warning: host doesn't support requested feature: CPUID.01H:ECX.tsc-deadline [bit 24] warning: host doesn't support requested feature: CPUID.01H:ECX.xsave [bit 26] warning: host doesn't support requested feature: CPUID.01H:ECX.avx [bit 28] warning: host doesn't support requested feature: CPUID.07H:EBX.fsgsbase [bit 0] warning: host doesn't support requested feature: CPUID.07H:EBX.bmi1 [bit 3] warning: host doesn't support requested feature: CPUID.07H:EBX.hle [bit 4] warning: host doesn't support requested feature: CPUID.07H:EBX.avx2 [bit 5] warning: host doesn't support requested feature: CPUID.07H:EBX.smep [bit 7] warning: host doesn't support requested feature: CPUID.07H:EBX.bmi2 [bit 8] warning: host doesn't support requested feature: CPUID.07H:EBX.erms [bit 9] warning: host doesn't support requested feature: CPUID.07H:EBX.invpcid [bit 10] warning: host doesn't support requested feature: CPUID.07H:EBX.rtm [bit 11] [...] $ ./QMP/qmp --path=/tmp/m \ qom-get --path=/machine/icc-bridge/icc/child[0] \ --property=filtered-features item[0].cpuid-register: EDX item[0].cpuid-input-eax: 2147483658 item[0].features: 0 item[1].cpuid-register: EAX item[1].cpuid-input-eax: 1073741825 item[1].features: 0 item[2].cpuid-register: EDX item[2].cpuid-input-eax: 3221225473 item[2].features: 0 item[3].cpuid-register: ECX item[3].cpuid-input-eax: 2147483649 item[3].features: 0 item[4].cpuid-register: EDX item[4].cpuid-input-eax: 2147483649 item[4].features: 0 item[5].cpuid-register: EBX item[5].cpuid-input-eax: 7 item[5].features: 4025 item[5].cpuid-input-ecx: 0 item[6].cpuid-register: ECX item[6].cpuid-input-eax: 1 item[6].features: 356519936 item[7].cpuid-register: EDX item[7].cpuid-input-eax: 1 item[7].features: 0 Example output when no feature is missing: $ qemu-system-x86_64 -enable-kvm -cpu Nehalem,enforce -S \ -qmp unix:/tmp/m,server,nowait [...] $ ./QMP/qmp --path=/tmp/m \ qom-get --path=/machine/icc-bridge/icc/child[0] \ --property=filtered-features item[0].cpuid-register: EDX item[0].cpuid-input-eax: 2147483658 item[0].features: 0 item[1].cpuid-register: EAX item[1].cpuid-input-eax: 1073741825 item[1].features: 0 item[2].cpuid-register: EDX item[2].cpuid-input-eax: 3221225473 item[2].features: 0 item[3].cpuid-register: ECX item[3].cpuid-input-eax: 2147483649 item[3].features: 0 item[4].cpuid-register: EDX item[4].cpuid-input-eax: 2147483649 item[4].features: 0 item[5].cpuid-register: EBX item[5].cpuid-input-eax: 7 item[5].features: 0 item[5].cpuid-input-ecx: 0 item[6].cpuid-register: ECX item[6].cpuid-input-eax: 1 item[6].features: 0 item[7].cpuid-register: EDX item[7].cpuid-input-eax: 1 item[7].features: 0 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Introduce X86CPU::filtered_features fieldEduardo Habkost
This field will contain the feature bits that were filtered out because of missing host support. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Add "feature-words" property to X86CPUEduardo Habkost
This property will be useful for libvirt, as libvirt already has logic based on low-level feature bits (not feature names), so it will be really easy to convert the current libvirt logic to something using the "feature-words" property. The property will have two main use cases: - Checking host capabilities, by checking the features of the "host" CPU model - Checking which features are enabled on each CPU model Example output: $ ./QMP/qmp --path=/tmp/m \ qom-get --path=/machine/icc-bridge/icc/child[0] \ --property=feature-words item[0].cpuid-register: EDX item[0].cpuid-input-eax: 2147483658 item[0].features: 0 item[1].cpuid-register: EAX item[1].cpuid-input-eax: 1073741825 item[1].features: 0 item[2].cpuid-register: EDX item[2].cpuid-input-eax: 3221225473 item[2].features: 0 item[3].cpuid-register: ECX item[3].cpuid-input-eax: 2147483649 item[3].features: 101 item[4].cpuid-register: EDX item[4].cpuid-input-eax: 2147483649 item[4].features: 563346425 item[5].cpuid-register: EBX item[5].cpuid-input-eax: 7 item[5].features: 0 item[5].cpuid-input-ecx: 0 item[6].cpuid-register: ECX item[6].cpuid-input-eax: 1 item[6].features: 2155880449 item[7].cpuid-register: EDX item[7].cpuid-input-eax: 1 item[7].features: 126614521 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Use FeatureWord loop on filter_features_for_kvm()Eduardo Habkost
Instead of open-coding the filtering code for each feature word, change the existing code to use the feature_word_info array, that has exactly the same CPUID eax/ecx/register values for each feature word. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06target-i386: Add ECX information to FeatureWordInfoEduardo Habkost
FEAT_7_0_EBX uses ECX as input, so we have to take that into account when reporting feature word values. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-06s390: update s390-ccw.imgAlexander Graf
Now that we have boot device selection support, update the firmware blob accordingly. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: BIOS boot from given deviceDominik Dingel
Use the passed device, if there is no device, use the first applicable device. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: Add virtio-blk bootDominik Dingel
If no kernel IPL entry is specified, boot the bios and pass if available device information for the first boot device (as given by the boot index). The provided information will be used in the next commit from the BIOS. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: Merging s390_ipl_cpu and s390_ipl_resetDominik Dingel
There is no use in have this splitted in two functions. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: BIOS create link to src folder for .img fileDominik Dingel
For *.img files, there will be a link created directly to the src folder, like for all other blobs. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06S390: BIOS check for fileDominik Dingel
Add a check if the BIOS blob exists before trying to load. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-10 01:51:36 +0000