aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-28riscv/sifive_u: Add the start-in-flash propertyAlistair Francis
Add a property that when set to true QEMU will jump from the ROM code to the start of flash memory instead of DRAM which is the default behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Manually define the machineAlistair Francis
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to specify machine properties. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add QSPI memory regionAlistair Francis
The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no model of this in QEMU, so to allow boot firmware developers to use QEMU to target the Unleashed let's add a chunk of memory to represent the QSPI0 memory mapped flash. This can be targeted using QEMU's -device loader command line option. In the future we can look at adding a model for the is25wp256 flash. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add L2-LIM cache memoryAlistair Francis
On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28linux-user/riscv: Propagate fault addressGiuseppe Musacchio
The CPU loop tagged all the queued signals as QEMU_SI_KILL while it was filling the `_sigfault` part of `siginfo`: this caused QEMU to copy the wrong fields over to the userspace program. Make sure the fault address recorded by the MMU is is stored in the CPU environment structure. In case of memory faults store the exception address into `siginfo`. Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: sifive_u: Add ethernet0 to the aliases nodeBin Meng
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133033/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: hw: Drop "clock-frequency" property of cpu nodesBin Meng
The "clock-frequency" property of cpu nodes isn't required. Drop it. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133031/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28RISC-V: Implement cpu_do_transaction_failedPalmer Dabbelt
This converts our port over from cpu_do_unassigned_access to cpu_do_transaction_failed, as cpu_do_unassigned_access has been deprecated. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28RISC-V: Handle bus errors in the page table walkerPalmer Dabbelt
We directly access physical memory while walking the page tables on RISC-V, but while doing so we were using cpu_ld*() which does not report bus errors. This patch converts the page table walker over to use address_space_ld*(), which allows bus errors to be detected. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: Skip checking CSR privilege level in debugger modeBin Meng
If we are in debugger mode, skip the CSR privilege level checking so that we can read/write all CSRs. Otherwise we get: (gdb) p/x $mtvec Could not fetch register "mtvec"; remote failure reply 'E14' when the hart is currently in S-mode. Reported-by: Zong Li <zong.li@sifive.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' ↵Peter Maydell
into staging Block patches for softfreeze: - iotest patches - Improve performance of the mirror block job in write-blocking mode - Limit memory usage for the backup block job - Add discard and write-zeroes support to the NVMe host block driver - Fix a bug in the mirror job - Prevent the qcow2 driver from creating technically non-compliant qcow2 v3 images (where there is not enough extra data for snapshot table entries) - Allow callers of bdrv_truncate() (etc.) to determine whether the file must be resized to the exact given size or whether it is OK for block devices not to shrink # gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits) qemu-iotests: restrict 264 to qcow2 only Revert "qemu-img: Check post-truncation size" block: Pass truncate exact=true where reasonable block: Let format drivers pass @exact block: Evaluate @exact in protocol drivers block: Add @exact parameter to bdrv_co_truncate() block: Do not truncate file node when formatting block/cor: Drop cor_co_truncate() block: Handle filter truncation like native impl. iotests: Test qcow2's snapshot table handling iotests: Add peek_file* functions qcow2: Fix v3 snapshot table entry compliancy qcow2: Repair snapshot table with too many entries qcow2: Fix overly long snapshot tables qcow2: Keep track of the snapshot table length qcow2: Fix broken snapshot table entries qcow2: Add qcow2_check_fix_snapshot_table() qcow2: Separate qcow2_check_read_snapshot_table() qcow2: Write v3-compliant snapshot list on upgrade qcow2: Put qcow2_upgrade() into its own function ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: features, tests libqos update with support for virtio 1. Packed ring support for virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 25 Oct 2019 12:47:59 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio: drop unused virtio_device_stop_ioeventfd() function libqos: add VIRTIO PCI 1.0 support libqos: extract Legacy virtio-pci.c code libqos: make the virtio-pci BAR index configurable libqos: expose common virtqueue setup/cleanup functions libqos: add MSI-X callbacks to QVirtioPCIDevice libqos: pass full QVirtQueue to set_queue_address() libqos: add iteration support to qpci_find_capability() libqos: access VIRTIO 1.0 vring in little-endian libqos: implement VIRTIO 1.0 FEATURES_OK step libqos: enforce Device Initialization order libqos: add missing virtio-9p feature negotiation tests/virtio-blk-test: set up virtqueue after feature negotiation virtio-scsi-test: add missing feature negotiation libqos: extend feature bits to 64-bit libqos: read QVIRTIO_MMIO_VERSION register tests/virtio-blk-test: read config space after feature negotiation virtio: add property to enable packed virtqueue vhost_net: enable packed ring support virtio: event suppression support for packed ring ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28tests: benchmark crypto with fixed data size, not time periodDaniel P. Berrangé
Currently the crypto benchmarks are processing data in varying chunk sizes, over a fixed time period. This turns out to be a terrible idea because with small chunk sizes the overhead of checking the elapsed time on each loop iteration masks the true performance. Benchmarking over a fixed data size avoids the loop running any system calls which can interfere with the performance measurements. Before this change Enc chunk 512 bytes 2283.47 MB/sec Dec chunk 512 bytes 2236.23 MB/sec OK Enc chunk 4096 bytes 2744.97 MB/sec Dec chunk 4096 bytes 2614.71 MB/sec OK Enc chunk 16384 bytes 2777.53 MB/sec Dec chunk 16384 bytes 2678.44 MB/sec OK Enc chunk 65536 bytes 2809.34 MB/sec Dec chunk 65536 bytes 2699.47 MB/sec OK After this change Enc chunk 512 bytes 2058.22 MB/sec Dec chunk 512 bytes 2030.11 MB/sec OK Enc chunk 4096 bytes 2699.27 MB/sec Dec chunk 4096 bytes 2573.78 MB/sec OK Enc chunk 16384 bytes 2748.52 MB/sec Dec chunk 16384 bytes 2653.76 MB/sec OK Enc chunk 65536 bytes 2814.08 MB/sec Dec chunk 65536 bytes 2712.74 MB/sec OK The actual crypto performance hasn't changed, which shows how significant the mis-measurement has been for small data sizes. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-28tests: allow filtering crypto cipher benchmark testsDaniel P. Berrangé
Add support for specifying a cipher mode and chunk size as argv to filter which combinations are benchmarked. For example to only benchmark XTS mode with 512 byte chunks: ./tests/benchmark-crypto-cipher xts 512 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-28qemu-iotests: restrict 264 to qcow2 onlyVladimir Sementsov-Ogievskiy
264 is unprepared to run with different formats, for example luks needs handling keys, cloop doesn't support image creation, vpc creates image larger than requested (which breaks "Backup completed: 5242880" in test output). The test is here to check nbd-reconnect feature and we actually don't need it for all formats. Let's restrict it to qcow2 only. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20191025145023.6182-1-vsementsov@virtuozzo.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28Revert "qemu-img: Check post-truncation size"Max Reitz
This reverts commit 5279b30392da7a3248b320c75f20c61e3a95863c. We no longer need this check because exact=true forces the block driver to give the image the exact size requested by the user. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-9-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Pass truncate exact=true where reasonableMax Reitz
This is a change in behavior, so all instances need a good justification. The comments added here should explain my reasoning. qed already had a comment that suggests it always expected bdrv_truncate()/blk_truncate() to behave as if exact=true were passed (c743849bee7 came eight months before 55b949c8476), so it was simply broken until now. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-8-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> [mreitz: Changed comment in qed.c to explain why a new QED file must be empty, as requested and suggested by Maxim] Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Let format drivers pass @exactMax Reitz
When truncating a format node, the @exact parameter is generally handled simply by virtue of the format storing the new size in the image metadata. Such formats do not need to pass on the parameter to their file nodes. There are exceptions, though: - raw and crypto cannot store the image size, and thus must pass on @exact. - When using qcow2 with an external data file, it just makes sense to keep its size in sync with the qcow2 virtual disk (because the external data file is the virtual disk). Therefore, we should pass @exact when truncating it. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-7-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Evaluate @exact in protocol driversMax Reitz
We have two protocol drivers that return success when trying to shrink a block device even though they cannot shrink it. This behavior is now only allowed with exact=false, so they should return an error with exact=true. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-6-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Add @exact parameter to bdrv_co_truncate()Max Reitz
We have two drivers (iscsi and file-posix) that (in some cases) return success from their .bdrv_co_truncate() implementation if the block device is larger than the requested offset, but cannot be shrunk. Some callers do not want that behavior, so this patch adds a new parameter that they can use to turn off that behavior. This patch just adds the parameter and lets the block/io.c and block/block-backend.c functions pass it around. All other callers always pass false and none of the implementations evaluate it, so that this patch does not change existing behavior. Future patches take care of that. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-5-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Do not truncate file node when formattingMax Reitz
There is no reason why the format drivers need to truncate the protocol node when formatting it. When using the old .bdrv_co_create_ops() interface, the file will be created with no size option anyway, which generally gives it a size of 0. (Exceptions are block devices, which cannot be truncated anyway.) When using blockdev-create, the user must have given the file node some size anyway, so there is no reason why we should override that. qed is an exception, it needs the file to start completely empty (as explained by c743849bee7333c7ef256b7e12e34ed6f907064f). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-4-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/cor: Drop cor_co_truncate()Max Reitz
No other filter driver has a .bdrv_co_truncate() implementation, and there is no need to because the general block layer code can handle it just as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-3-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block: Handle filter truncation like native impl.Max Reitz
Make the filter truncation (passing it through to bs->file) a first-class citizen and handle it exactly as if it was the filter driver's native implementation of .bdrv_co_truncate(). I do not see a reason not to, it makes the code a bit shorter, and may be even more correct because this gets us to finish the write_req that we prepared before (may be important to e.g. bring dirty bitmaps to the correct size). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190918095144.955-2-mreitz@redhat.com Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28iotests: Test qcow2's snapshot table handlingMax Reitz
Add a test how our qcow2 driver handles extra data in snapshot table entries, and how it repairs overly long snapshot tables. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-17-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28iotests: Add peek_file* functionsMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-16-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Fix v3 snapshot table entry compliancyMax Reitz
qcow2 v3 images require every snapshot table entry to have at least 16 bytes of extra data. If they do not, let qemu-img check -r all fix it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-15-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Repair snapshot table with too many entriesMax Reitz
The user cannot choose which snapshots are removed. This is fine because we have chosen the maximum snapshot table size to be so large (65536 entries) that it cannot be reasonably reached. If the snapshot table exceeds this size, the image has probably been corrupted in some way; in this case, it is most important to just make the image usable such that the user can copy off at least the active layer. (Also note that the snapshots will be removed only with "-r all", so a plain "check" or "check -r leaks" will not delete any data.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-14-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Fix overly long snapshot tablesMax Reitz
We currently refuse to open qcow2 images with overly long snapshot tables. This patch makes qemu-img check -r all drop all offending entries past what we deem acceptable. The user cannot choose which snapshots are removed. This is fine because we have chosen the maximum snapshot table size to be so large (64 MB) that it cannot be reasonably reached. If the snapshot table exceeds this size, the image has probably been corrupted in some way; in this case, it is most important to just make the image usable such that the user can copy off at least the active layer. (Also note that the snapshots will be removed only with "-r all", so a plain "check" or "check -r leaks" will not delete any data.) Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-13-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Keep track of the snapshot table lengthMax Reitz
When repairing the snapshot table, we truncate entries that have too much extra data. This frees up space that we do not have to count towards the snapshot table size. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-12-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Fix broken snapshot table entriesMax Reitz
The only case where we currently reject snapshot table entries is when they have too much extra data. Fix them with qemu-img check -r all by counting it as a corruption, reducing their extra_data_size, and then letting qcow2_check_fix_snapshot_table() do the rest. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-11-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Add qcow2_check_fix_snapshot_table()Max Reitz
qcow2_check_read_snapshot_table() can perform consistency checks, but it cannot fix everything. Specifically, it cannot allocate new clusters, because that should wait until the refcount structures are known to be consistent (i.e., after qcow2_check_refcounts()). Thus, it cannot call qcow2_write_snapshots(). Do that in qcow2_check_fix_snapshot_table(), which is called after qcow2_check_refcounts(). Currently, there is nothing that would set result->corruptions, so this is a no-op. A follow-up patch will change that. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-10-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Separate qcow2_check_read_snapshot_table()Max Reitz
Reading the snapshot table can fail. That is a problem when we want to repair the image. Therefore, stop reading the snapshot table in qcow2_do_open() in check mode. Instead, add a new function qcow2_check_read_snapshot_table() that reads the snapshot table at a later point. In the future, we want to handle errors here and fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-9-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Write v3-compliant snapshot list on upgradeMax Reitz
qcow2 v3 requires every snapshot table entry to have two extra data fields: The 64-bit VM state size, and the virtual disk size. Both are optional for v2 images, so they may not be present. qcow2_upgrade() therefore should update the snapshot table to ensure all entries have these extra data fields. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1727347 Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-8-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Put qcow2_upgrade() into its own functionMax Reitz
This does not make sense right now, but it will make sense once we need to do more than to just update s->qcow_version. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-7-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Make qcow2_write_snapshots() publicMax Reitz
Updating the snapshot list will be useful when upgrading a v2 image to v3, so we will need to call this function in qcow2.c. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-6-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Keep unknown extra snapshot dataMax Reitz
The qcow2 specification says to ignore unknown extra data fields in snapshot table entries. Currently, we discard it whenever we update the image, which is a bit different from "ignore". This patch makes the qcow2 driver keep all unknown extra data fields when updating an image's snapshot table. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-5-mreitz@redhat.com [mreitz: Adjusted comments as proposed by Eric] Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Add Error ** to qcow2_read_snapshots()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-4-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28qcow2: Use endof()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-3-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28include: Move endof() up from hw/virtio/virtio.hMax Reitz
endof() is a useful macro, we can make use of it outside of virtio. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28mirror: Do not dereference invalid pointersMax Reitz
mirror_exit_common() may be called twice (if it is called from mirror_prepare() and fails, it will be called from mirror_abort() again). In such a case, many of the pointers in the MirrorBlockJob object will already be freed. This can be seen most reliably for s->target, which is set to NULL (and then dereferenced by blk_bs()). Cc: qemu-stable@nongnu.org Fixes: 737efc1eda23b904fbe0e66b37715fb0e5c3e58b Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20191014153931.20699-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/nvme: add support for discardMaxim Levitsky
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-id: 20190913133627.28450-3-mlevitsk@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/nvme: add support for write zerosMaxim Levitsky
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-id: 20190913133627.28450-2-mlevitsk@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/block-copy: increase buffered copy requestVladimir Sementsov-Ogievskiy
No reason to limit buffered copy to one cluster. Let's allow up to 1 MiB. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-7-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/block-copy: add memory limitVladimir Sementsov-Ogievskiy
Currently total allocation for parallel requests to block-copy instance is unlimited. Let's limit it to 128 MiB. For now block-copy is used only in backup, so actually we limit total allocation for backup job. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-6-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28util: introduce SharedResourceVladimir Sementsov-Ogievskiy
Introduce an API for some shared splittable resource, like memory. It's going to be used by backup. Backup uses both read/write io and copy_range. copy_range may consume memory implictly, so the new API is abstract: it doesn't allocate any real memory but only hands out tickets. The idea is that we have some total amount of something and callers should wait in coroutine queue if there is not enough of the resource at the moment. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-5-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/block-copy: refactor copyingVladimir Sementsov-Ogievskiy
Merge copying code into one function block_copy_do_copy, which only calls bdrv_ io functions and don't do any synchronization (like dirty bitmap set/reset). Refactor block_copy() function so that it takes full decision about size of chunk to be copied and does all the synchronization (checking intersecting requests, set/reset dirty bitmaps). It will help: - introduce parallel processing of block_copy iterations: we need to calculate chunk size, start async chunk copying and go to the next iteration - simplify synchronization improvement (like memory limiting in further commit and reducing critical section (now we lock the whole requested range, when actually we need to lock only dirty region which we handle at the moment)) Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-4-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/block-copy: limit copy_range_size to 16 MiBVladimir Sementsov-Ogievskiy
Large copy range may imply memory allocation and large io effort, so using 2G copy range request may be bad idea. Let's limit it to 16 MiB. It also helps the following patch to refactor copy-with-offload fallback to copy-with-bounce-buffer. Note, that total memory usage of backup is still not limited, it will be fixed in further commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-3-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28block/block-copy: allocate buffer in block_copy_with_bounce_bufferVladimir Sementsov-Ogievskiy
Move bounce_buffer allocation block_copy_with_bounce_buffer. This commit simplifies further work on implementing copying by larger chunks (of different size) and further asynchronous handling of block_copy iterations (with help of block/aio_task API). Allocation works fast, a lot faster than disk io, so it's not a problem that we now allocate/free bounce_buffer more times. And we anyway will have to allocate several bounce_buffers for parallel execution of loop iterations in future. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 20191022111805.3432-2-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28iotests: Drop TEST_DIR filter from _filter_nbdMax Reitz
Sockets should be placed into $SOCK_DIR instead of $TEST_DIR, so remove the $TEST_DIR filter from _filter_nbd. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191017133155.5327-24-mreitz@redhat.com Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28iotests/267: Create socket in $SOCK_DIRMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191017133155.5327-23-mreitz@redhat.com Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 12:47:47 +0000