aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-25MAINTAINERS: add more devices to the PCI sectionPaolo Bonzini
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-25MAINTAINERS: add more devices to the PC sectionPaolo Bonzini
For chipset devices, I can co-maintain it with Michael. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24vhost-user: add a new message to disable/enable a specific virt queue.Changchun Ouyang
Add a new message, VHOST_USER_SET_VRING_ENABLE, to enable or disable a specific virt queue, which is similar to attach/detach queue for tap device. virtio driver on guest doesn't have to use max virt queue pair, it could enable any number of virt queue ranging from 1 to max virt queue pair. Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost-user: add multiple queue supportChangchun Ouyang
This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost: introduce vhost_backend_get_vq_index methodYuanhan Liu
Minusing the idx with the base(dev->vq_index) for vhost-kernel, and then adding it back for vhost-user doesn't seem right. Here introduces a new method vhost_backend_get_vq_index() for getting the right vq index for following vhost messages calls. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost-user: add VHOST_USER_GET_QUEUE_NUM messageYuanhan Liu
This is for querying how many queues the backend supports if it has mq support(when VHOST_USER_PROTOCOL_F_MQ flag is set from the quried protocol features). vhost_net_get_max_queues() is the interface to export that value, and to tell if the backend supports # of queues user requested, which is done in the following patch. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost: rename VHOST_RESET_OWNER to VHOST_RESET_DEVICEYuanhan Liu
Quote from Michael: We really should rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost-user: add protocol feature negotiationMichael S. Tsirkin
Support a separate bitmask for vhost-user protocol features, and messages to get/set protocol features. Invoke them at init. No features are defined yet. [ leverage vhost_user_call for request handling -- Yuanhan Liu ] Signed-off-by: Michael S. Tsirkin <address@hidden> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost-user: use VHOST_USER_XXX macro for switch statementYuanhan Liu
So that we could let vhost_user_call to handle extented requests, such as VHOST_USER_GET/SET_PROTOCOL_FEATURES, instead of invoking vhost_user_read/write and constructing the msg again by ourself. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24virtio-ccw: enable virtio-1Cornelia Huck
Let's enable revision 1 for virtio-ccw devices. We can always offer VERSION_1 as drivers in legacy mode won't be able to see it anyway. We have to introduce a way to set a lower maximum revision for a device to accommodate the following cases: - compat machines (to enforce legacy only) - virtio-blk with scsi support (version 1 + scsi is fenced by common code, with a user-configured max revision of 0 we can allow scsi via not offering VERSION_1) Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24virtio-ccw: feature bits > 31 handlingCornelia Huck
We currently switch off the VERSION_1 feature bit if the guest has not negotiated at least revision 1. As no feature bits beyond 31 are valid however unless VERSION_1 has been negotiated, make sure that legacy guests never see a feature bit beyond 31. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24virtio-ccw: support ring size changesCornelia Huck
Wire up changing the ring size for virtio-1 devices. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24virtio: ring sizes vs. resetCornelia Huck
We allow guests to change the size of the virtqueue rings by supplying a number of buffers that is different from the number of buffers the device was initialized with. Current code has some problems, however, since reset does not reset the ringsizes to the default values (as this is not saved anywhere). Let's extend the core code to keep track of the default ringsizes and migrate them once the guest changed them for any of the virtqueues for a device. Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24pc: Introduce pc-*-2.5 machine classesEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24q35: Move options common to all classes to pc_i440fx_machine_options()Eduardo Habkost
The existing default_machine_opts and default_display settings will still apply to future machine classes. So it makes sense to move them to pc_i440fx_machine_options() instead of keeping them in a version-specific machine_options function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24q35: Move options common to all classes to pc_q35_machine_options()Eduardo Habkost
The existing default_machine_opts, default_display, no_floppy, and no_tco settings will still apply to future machine classes. So it makes sense to move them to pc_q35_machine_options() instead of keeping them in a version-specific machine_options function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24virtio-net: unbreak self announcement and guest offloads after migrationJason Wang
After commit 019a3edbb25f1571e876f8af1ce4c55412939e5d ("virtio: make features 64bit wide"). Device's guest_features was actually set after vdc->load(). This breaks the assumption that device specific load() function can check guest_features. For virtio-net, self announcement and guest offloads won't work after migration. Fixing this by defer them to virtio_net_load() where guest_features were guaranteed to be set. Other virtio devices looks fine. Fixes: 019a3edbb25f1571e876f8af1ce4c55412939e5d ("virtio: make features 64bit wide") Cc: qemu-stable@nongnu.org Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-24virtio: right size for virtio_queue_get_avail_sizePierre Morel
Being working on dataplane I notice something strange: virtio_queue_get_avail_size() used a 64bit size index for the calculation of the available ring size. It is quite strange but it did work with the old calculation of the avail ring, at most with performance penalty, and I wonder where I missed something. This patch let use a 16bit size as defined in virtio_ring.h Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-23Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150923.0' ↵Peter Maydell
into staging VFIO updates 2015-09-23 - Tracing improvements to use common prefixes for functional areas - Quirks overhaul: - Split PCI quirks to separate file - Make them understandable and more extensible - Improve use of MemoryRegions and eliminate use of target pagesize - Eliminate build-time debugging, everything migrated to runtime opts # gpg: Signature made Wed 23 Sep 2015 21:09:05 BST using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20150923.0: vfio/pci: Add emulated PCI IDs vfio/pci: Cache vendor and device ID vfio/pci: Move AMD device specific reset to quirks vfio/pci: Remove old config window and mirror quirks vfio/pci: Config mirror quirk vfio/pci: Config window quirks vfio/pci: Rework RTL8168 quirk vfio/pci: Cleanup Nvidia 0x3d0 quirk vfio/pci: Cleanup ATI 0x3c3 quirk vfio/pci: Foundation for new quirk structure vfio/pci: Cleanup ROM blacklist quirk vfio/pci: Split quirks to a separate file vfio/pci: Extract PCI structures to a separate header vfio: Change polarity of our no-mmap option vfio/pci: Make interrupt bypass runtime configurable vfio/pci: Rename MSI/X functions for easier tracing vfio/pci: Rename INTx functions for easier tracing vfio/pci: Cleanup vfio_early_setup_msix() error path vfio/pci: Cleanup RTL8168 quirk and tracing Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-23vfio/pci: Add emulated PCI IDsAlex Williamson
Specifying an emulated PCI vendor/device ID can be useful for testing various quirk paths, even though the behavior and functionality of the device with bogus IDs is fully unsupportable. We need to use a uint32_t for the vendor/device IDs, even though the registers themselves are only 16-bit in order to be able to determine whether the value is valid and user set. The same support is added for subsystem vendor/device ID, though these have the possibility of being useful and supported for more than a testing tool. An emulated platform might want to impose their own subsystem IDs or at least hide the physical subsystem ID. Windows guests will often reinstall drivers due to a change in subsystem IDs, something that VM users may want to avoid. Of course careful attention would be required to ensure that guest drivers do not rely on the subsystem ID as a basis for device driver quirks. All of these options are added using the standard experimental option prefix and should not be considered stable. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Cache vendor and device IDAlex Williamson
Simplify access to commonly referenced PCI vendor and device ID by caching it on the VFIOPCIDevice struct. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Move AMD device specific reset to quirksAlex Williamson
This is just another quirk, for reset rather than affecting memory regions. Move it to our new quirks file. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Remove old config window and mirror quirksAlex Williamson
These are now unused. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Config mirror quirkAlex Williamson
Re-implement our mirror quirk using the new infrastructure. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Config window quirksAlex Williamson
Config windows make use of an address register and a data register. In VGA cards, these are often used to provide real mode code in the BIOS an easy way to access MMIO registers since the window often resides in an I/O port register. When the MMIO register has a mirror of PCI config space, we need to trap those accesses and redirect them to emulated config space. The previous version of this functionality made use of a single MemoryRegion and single match address. This version uses separate MemoryRegions for each of the address and data registers and allows for multiple match addresses. This is useful for Nvidia cards which have two ranges which index into PCI config space. The previous implementation is left for the follow-on patch for a more reviewable diff. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Rework RTL8168 quirkAlex Williamson
Another rework of this quirk, this time to update to the new quirk structure. We can handle the address and data registers with separate MemoryRegions and a quirk specific data structure, making the code much more understandable. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Cleanup Nvidia 0x3d0 quirkAlex Williamson
The Nvidia 0x3d0 quirk makes use of a two separate registers and gives us our first chance to make use of separate memory regions for each to simplify the code a bit. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Cleanup ATI 0x3c3 quirkAlex Williamson
This is an easy quirk that really doesn't need a data structure if its own. We can pass vdev as the opaque data and access to the MemoryRegion isn't required. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Foundation for new quirk structureAlex Williamson
VFIOQuirk hosts a single memory region and a fixed set of data fields that try to handle all the quirk cases, but end up making those that don't exactly match really confusing. This patch introduces a struct intended to provide more flexibility and simpler code. VFIOQuirk is stripped to its basics, an opaque data pointer for quirk specific data and a pointer to an array of MemoryRegions with a counter. This still allows us to have common teardown routines, but adds much greater flexibility to support multiple memory regions and quirk specific data structures that are easier to maintain. The existing VFIOQuirk is transformed into VFIOLegacyQuirk, which further patches will eliminate entirely. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Cleanup ROM blacklist quirkAlex Williamson
Create a vendor:device ID helper that we'll also use as we rework the rest of the quirks. Re-reading the config entries, even if we get more blacklist entries, is trivial overhead and only incurred during device setup. There's no need to typedef the blacklist structure, it's a static private data type used once. The elements get bumped up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets used for a blacklist entry (avoiding an actual hardware match). Our test loop is also crying out to be simplified as a for loop. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Split quirks to a separate fileAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Extract PCI structures to a separate headerAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio: Change polarity of our no-mmap optionAlex Williamson
The default should be to allow mmap and new drivers shouldn't need to expose an option or set it to other than the allocation default in their initfn. Take advantage of the experimental flag to change this option to the correct polarity. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Make interrupt bypass runtime configurableAlex Williamson
Tracing is more effective when we can completely disable all KVM bypass paths. Make these runtime rather than build-time configurable. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Rename MSI/X functions for easier tracingAlex Williamson
This allows vfio_msi* tracing. The MSI/X interrupt tracing is also pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this path. A few cycles to read the message is hardly anything if we're already in QEMU. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Rename INTx functions for easier tracingAlex Williamson
Rename functions and tracing callbacks so that we can trace vfio_intx* to see all the INTx related activities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23vfio/pci: Cleanup vfio_early_setup_msix() error pathAlex Williamson
With the addition of the Chelsio quirk we have an error path out of vfio_early_setup_msix() that doesn't free the allocated VFIOMSIXInfo struct. This doesn't introduce a leak as it still gets freed in the vfio_put_device() path, but it's complicated and sloppy to rely on that. Restructure to free the allocated data on error and only link it into the vdev on success. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2015-09-23vfio/pci: Cleanup RTL8168 quirk and tracingAlex Williamson
There's quite a bit of cleanup that can be done to the RTL8168 quirk, as well as the tracing to prevent a spew of uninteresting accesses for anything else the driver might choose to use the window registers for besides the MSI-X table. There should be no functional change, but it's now possible to get compact and useful traces by enabling vfio_rtl8168_quirk*, ex: vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000 vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000 vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004 vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004 vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0 vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008 vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008 vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1 vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0 Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-09-23Merge remote-tracking branch 'remotes/dgibson/tags/spapr-next-20150923' into ↵Peter Maydell
staging sPAPR Patch Queue: 2015-09-23 Highlights: * pseries-2.5 machine type * Memory hotplug for "pseries" guests * Fixes to the PAPR Dynamic Reconfiguration hotplug code * Several PAPR compliance fixes * New SLOF with: * GPT support * Much faster VGA handling # gpg: Signature made Wed 23 Sep 2015 02:50:10 BST using DSA key ID FDDA6FC6 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: F730 2185 38B4 D13E FD80 34F2 6882 CAC6 FDDA 6FC6 * remotes/dgibson/tags/spapr-next-20150923: (36 commits) sPAPR: Enable EEH on VFIO PCI device only sPAPR: Revert don't enable EEH on emulated PCI devices ppc/spapr: Implement H_RANDOM hypercall in QEMU ppc/spapr: Fix buffer overflow in spapr_populate_drconf_memory() spapr: Fix default NUMA node allocation for threads spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type spapr: Support hotplug by specifying DRC count spapr: Revert to memory@XXXX representation for non-hotplugged memory spapr: Populate ibm,associativity-lookup-arrays correctly for non-NUMA spapr: Provide better error message when slots exceed max allowed spapr: Don't allow memory hotplug to memory less nodes spapr: Memory hotplug support spapr: Make hash table size a factor of maxram_size spapr: Support ibm,dynamic-reconfiguration-memory spapr: Add LMB DR connectors spapr: Use QEMU limit for maximum CPUs number spapr: Don't use QOM [*] syntax for DR connectors. spapr_drc: use RTAS return codes for methods called by RTAS spapr: Initialize hotplug memory address space spapr_drc: don't allow 'empty' DRCs to be unisolated or allocated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-23sPAPR: Enable EEH on VFIO PCI device onlyGavin Shan
This checks if the PCI device retrieved from the PCI device address is VFIO PCI device when enabling EEH functionality. If it's not VFIO PCI device, the EEH functonality isn't enabled. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23sPAPR: Revert don't enable EEH on emulated PCI devicesGavin Shan
This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated PCI devices") as rtas_ibm_set_eeh_option() isn't the right place to check if there has the corresponding PCI device for the input address, which can be PE address, not PCI device address. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23ppc/spapr: Implement H_RANDOM hypercall in QEMUThomas Huth
The PAPR interface defines a hypercall to pass high-quality hardware generated random numbers to guests. Recent kernels can already provide this hypercall to the guest if the right hardware random number generator is available. But in case the user wants to use another source like EGD, or QEMU is running with an older kernel, we should also have this call in QEMU, so that guests that do not support virtio-rng yet can get good random numbers, too. This patch now adds a new pseudo-device to QEMU that either directly provides this hypercall to the guest or is able to enable the in-kernel hypercall if available. The in-kernel hypercall can be enabled with the use-kvm property, e.g.: qemu-system-ppc64 -device spapr-rng,use-kvm=true For handling the hypercall in QEMU instead, a "RngBackend" is required since the hypercall should provide "good" random data instead of pseudo-random (like from a "simple" library function like rand() or g_random_int()). Since there are multiple RngBackends available, the user must select an appropriate back-end via the "rng" property of the device, e.g.: qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \ -device spapr-rng,rng=gid0 ... See http://wiki.qemu-project.org/Features-Done/VirtIORNG for other example of specifying RngBackends. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23ppc/spapr: Fix buffer overflow in spapr_populate_drconf_memory()Thomas Huth
The buffer that is allocated in spapr_populate_drconf_memory() is used for setting both, the "ibm,dynamic-memory" and the "ibm,associativity-lookup-arrays" property. However, only the size of the first one is taken into account when allocating the memory. So if the length of the second property is larger than the length of the first one, we run into a buffer overflow here! Fix it by taking the length of the second property into account, too. Fixes: "spapr: Support ibm,dynamic-reconfiguration-memory" patch Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Fix default NUMA node allocation for threadsDavid Gibson
At present, if guest numa nodes are requested, but the cpus in each node are not specified, spapr just uses the default behaviour or assigning each vcpu round-robin to nodes. If smp_threads != 1, that will assign adjacent threads in a core to different NUMA nodes. As well as being just weird, that's a configuration that can't be represented in the device tree we give to the guest, which means the guest and qemu end up with different ideas of the NUMA topology. This patch implements mc->cpu_index_to_socket_id in the spapr code to make sure vcpus get assigned to nodes only at the socket granularity. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2015-09-23spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT typeBharata B Rao
Till now memory hotplug used RTAS_LOG_V6_HP_ID_DRC_INDEX hotplug type which meant that we generated one hotplug type of EPOW event for every 256MB (SPAPR_MEMORY_BLOCK_SIZE). This quickly overruns the kernel rtas log buffer thus resulting in loss of memory hotplug events. Switch to RTAS_LOG_V6_HP_ID_DRC_COUNT hotplug type for memory so that we generate only one event per hotplug request. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Support hotplug by specifying DRC countBharata B Rao
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows hotplugging of DRCs by specifying the DRC count. While we are here, rename spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index() spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index() so that they match with spapr_hotplug_req_add_by_count(). Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Revert to memory@XXXX representation for non-hotplugged memoryBharata B Rao
Don't represent non-hotluggable memory under drconf node. With this we don't have to create DRC objects for them. The effect of this patch is that we revert back to memory@XXXX representation for all the memory specified with -m option and represent the cold plugged memory and hot-pluggable memory under ibm,dynamic-reconfiguration-memory. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Populate ibm,associativity-lookup-arrays correctly for non-NUMABharata B Rao
When NUMA isn't configured explicitly, assume node 0 is present for the purpose of creating ibm,associativity-lookup-arrays property under ibm,dynamic-reconfiguration-memory DT node. This ensures that the associativity index property is correctly updated in ibm,dynamic-memory for the LMB that is hotplugged. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Provide better error message when slots exceed max allowedBharata B Rao
Currently when user specifies more slots than allowed max of SPAPR_MAX_RAM_SLOTS (32), we error out like this: qemu-system-ppc64: unsupported amount of memory slots: 64 Let the user know about the max allowed slots like this: qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Don't allow memory hotplug to memory less nodesBharata B Rao
Currently PowerPC kernel doesn't allow hot-adding memory to memory-less node, but instead will silently add the memory to the first node that has some memory. This causes two unexpected behaviours for the user. - Memory gets hotplugged to a different node than what the user specified. - Since pc-dimm subsystem in QEMU still thinks that memory belongs to memory-less node, a reboot will set things accordingly and the previously hotplugged memory now ends in the right node. This appears as if some memory moved from one node to another. So until kernel starts supporting memory hotplug to memory-less nodes, just prevent such attempts upfront in QEMU. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 03:23:08 +0000