Age | Commit message (Collapse) | Author |
|
MPIC and OpenPIC have very similar design.
So a lot of code can be reused.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6659 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6658 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Fixes qemu-arm|grep cpu - with _exit() getting output from qemu --help
is a bit random. Since no atexit() handlers are registered for user mode
emulation, just use exit() instead.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6657 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
A real 970 CPU starts up with HIOR=0xfff00000 and triggers a reset
exception, basically ending up at IP 0xfff001000.
Later on this HIOR has to be set to 0 by the firmware in order to
enable the OS to handle interrupts on its own.
This patch maps HIOR to exec_prefix, which does the same thing
internally in qemu already.
It replaces the previous patch that changed the 970 initialization
constants, as this is the clean solution to the same problem.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6656 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Practically speaking, "report" causes a lot of issues when encountering a host
ENOSPC error. Switch to "enospc" as the default werror semantics. All host
errors other than ENOSPC will be reported to the guest. ENOSPC will cause the
VM to stop. Asynchronous notifications are needed to inform management tools
that some action should be taken but stopping the VM is at least better than
undefined behavior in the guest.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6655 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
When the CPU is in little endian mode, it should load values from RAM
in byte swapped manner. This check is in all the ld and st functions,
but misspelled in gen_qemu_ld32s.
This patch fixes the misspelling and makes ppc64 Linux happier.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6654 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Initialize some variables to make GCC happy and switch from using index to
strchr. index is not available on Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6653 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Resent with fixed formatting.
This patch adds two new command line options:
-chroot <dir>
-runas <user>
This is useful for running qemu as an unprivileged user in a chroot
jail. To avoid having to populate the jail, chrooting happens right
before the start of guest execution.
Signed-off-by: Nolan Leake <nolan@sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6652 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Serial and virtio consoles already use 80x24 characters as default size,
apply the same to the parallel port consoles.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6651 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This is needed to dynamically add SLIC tables with Windows
activation keys.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6650 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
replace open coded qemu_log_mask with proper macro
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6649 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This upsets Windows installs and right now, virtio console isn't very useful
as a default device.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6648 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
net socket oversized packet
This is a patch being carried by Ubuntu against kvm/qemu.
Verify packet size before performing memcpy().
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6647 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
After doing a video to video copy, cirrus_do_copy() in cirrus_vga.c does a
conditional call to cirrus_invalidate_region() with an "if (!notify)" test.
However at this point the blt has already been done so it seems like this call
should be made unconditionally. The patch below fixes some display update
problems when dragging windows under both X (fedora 10 guest) and a Windows XP
guest.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6646 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Missing brackets, doh.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6645 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Hi all,
this small patch fixes a bug in the list iteration of raw_aio_remove.
Cheers,
Stefano
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6644 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
other arbitrary value (e.g. A7).
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6643 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6642 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6641 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
The sysctl variable if we're 64-bit capable only exists on i386. So we should only check it if we're on i386.
This suppresses a warning on PowerPC spotted by Andreas Faerber.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6640 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6639 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6638 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6637 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6636 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6635 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
pthread_cond_timedwait is allowed to both consume the signal and
return with the value indicating the timeout, hence predicate should
always be (re)checked before taking an action
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6634 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Avoid repeated creation/initalization/destruction of attr and calls to
getpid
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6633 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Broadcast was used so that the I/O threads would wakeup, reset their
ts values and all but one go to sleep, in other words an optimization
to prevent threads from exiting in presence of continuing I/O
activity. Spurious wakeups make the looping around cond_timedwait with
ever reinitialized ts potentially unsafe and as such ts in no longer
reinitilized inside the loop, hence switch to signal is warranted and
this benefits of this particlaur optimization are lost.
(It's worth noting that timed variants of pthread calls use realtime
clock by default, and therefore can hang "forever" should the host
time be changed. Unfortunatelly not all host systems QEMU runs on
support CLOCK_MONOTONIC and/or pthread_condattr_setclock with this
value)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6632 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This can happen due to spurious wakeups
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6631 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6630 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6629 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
KVM uses cpu_physical_memory_rw() to access the I/O devices. When a
read or write with a length of 8-byte is requested, it is split into 2
4-byte accesses.
This has been broken in revision 5849. After this revision, only the
first 4 bytes are actually read/write to the device, as the target
address is changed, so on the next iteration of the loop the next 4
bytes are actually read/written elsewhere (in the RAM for the graphic
card).
This patch fixes screen corruption (and most probably data corruption)
with FreeBSD/amd64. Bug #2556746 in KVM bugzilla.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6628 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6627 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
No need to check for failing qemu_malloc anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6626 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Natapov)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6625 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
For STS register bit are cleared by writing 1 into it.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6624 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6623 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
cirrus_do_copy() in hw/cirrus_vga.c seems to make some incorrect assumptions
about video memory layout. It tries to convert addresses to coordinates
assuming that one row of data is (width * depth) bytes long. The correct way
seems to be to use the pitch fields in the CirrusVGAState structure instead.
Without this patch, I get lots of screen corruption when I try to drag a window
under X as it's passing the wrong coordinates to the display surface for the
copy. With this patch I can drag a window with no screen corruption.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6622 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Change structure associated with a display from VncState to a new structure
VncDisplay. Remove client specific fields from VncDisplay. Remove display
specific fields from VncState. Maintain a linked list of VncStates per
VncDisplay structure, update as necessary. When updates/resizes/copies come in
from the hardware, dispatch to all clients.
Signed-off-by: Brian Kress <kressb@moose.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6621 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6620 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6619 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6618 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Incrementing the array index was missed in the previous series which causes
us to not store all the values.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6617 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
[ As requested, broken out of the monitor rework series. ]
Avoid a segfault when the user issues 'change vnc' without having vnc
enabled on startup.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6616 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
For qemu_realloc with size == 0 a result of NULL is perfectly fine
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6615 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Since we don't generate any "old op" anymore, the old_op_count
is unneeded.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6614 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6613 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6612 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6611 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success.
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
Save QEMUMachine necessary for drive_init.
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
|