aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-06roms: Added git submodule for u-boot-sam460 (firmware for sam460ex)BALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06ppc440: Add emulation of plb-pcix controller found in some 440 SoCsBALATON Zoltan
This is the PCIX controller found in newer 440 core SoCs e.g. the AMMC 460EX. The device tree refers to this as plb-pcix compared to the plb-pci controller in older 440 SoCs. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> [dwg: Remove hwaddr from trace-events, that doesn't work with some trace backends] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06ppc440_uc: Fix unintialized variable warning with older gccBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-06spapr: fix missing CPU core nodes in DT when running with TCGGreg Kurz
Commit 5d0fb1508e2d "spapr: consolidate the VCPU id numbering logic in a single place" introduced a helper to detect thread0 of a virtual core based on its VCPU id. This is used to create CPU core nodes in the DT, but it is broken in TCG. $ qemu-system-ppc64 -nographic -accel tcg -machine dumpdtb=dtb.bin \ -smp cores=16,maxcpus=16,threads=1 $ dtc -f -O dts dtb.bin | grep POWER8 PowerPC,POWER8@0 { PowerPC,POWER8@8 { instead of the expected 16 cores that we get with KVM: $ dtc -f -O dts dtb.bin | grep POWER8 PowerPC,POWER8@0 { PowerPC,POWER8@8 { PowerPC,POWER8@10 { PowerPC,POWER8@18 { PowerPC,POWER8@20 { PowerPC,POWER8@28 { PowerPC,POWER8@30 { PowerPC,POWER8@38 { PowerPC,POWER8@40 { PowerPC,POWER8@48 { PowerPC,POWER8@50 { PowerPC,POWER8@58 { PowerPC,POWER8@60 { PowerPC,POWER8@68 { PowerPC,POWER8@70 { PowerPC,POWER8@78 { This happens because spapr_get_vcpu_id() maps VCPU ids to cs->cpu_index in TCG mode. This confuses the code in spapr_is_thread0_in_vcore(), since it assumes thread0 VCPU ids to have a spapr->vsmt spacing. spapr_get_vcpu_id(cpu) % spapr->vsmt == 0 Actually, there's no real reason to expose cs->cpu_index instead of the VCPU id, since we also generate it with TCG. Also we already set it explicitly in spapr_set_vcpu_id(), so there's no real reason either to call kvm_arch_vcpu_id() with KVM. This patch unifies spapr_get_vcpu_id() to always return the computed VCPU id both in TCG and KVM. This is one step forward towards KVM<->TCG migration. Fixes: 5d0fb1508e2d Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-05Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request Mostly patches that are only indirectly related to the block layer, but I've reviewed them and there is no maintainer. # gpg: Signature made Mon 05 Mar 2018 09:39:50 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: README: Document 'git-publish' workflow Add a git-publish configuration file tests/libqos: Check for valid dev pointer when looking for PCI devices util/uri.c: wrap single statement blocks with braces {} util/uri.c: remove brackets that wrap `return` statement's content. util/uri.c: Coding style check, Only whitespace involved Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180305-pull-request' ↵Peter Maydell
into staging ui: build curses, gtk and sdl as modules. # gpg: Signature made Mon 05 Mar 2018 08:48:24 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180305-pull-request: ui/sdl: build as module audio: rename CONFIG_* to CONFIG_AUDIO_* ui/curses: build as module ui/gtk: build as module configure: opengl doesn't depend on x11 configure: add X11 vars to config-host.mak console: add ui module loading support console: add and use qemu_display_find_default egl-headless: switch over to new display registry curses: switch over to new display registry cocoa: switch over to new display registry sdl: switch over to new display registry console: add qemu display registry, add gtk Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: setting error appropriately when calling net_init_tap_one() hw/net: Remove unnecessary header includes net: Add a new convenience option "--nic" to configure default/on-board NICs net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands net: Remove the deprecated way of dumping network packets net: Make net_client_init() static net: Only show vhost-user in the help text if CONFIG_POSIX is defined net: List available netdevs with "-netdev help" net: Move error reporting from net_init_client/netdev to the calling site Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier/tags/m68k-for-2.12-pull-request' into staging # gpg: Signature made Sun 04 Mar 2018 17:32:25 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-2.12-pull-request: target/m68k: add fscale, fgetman and fgetexp softfloat: use floatx80_infinity in softfloat target/m68k: add fmod/frem softfloat: export some functions target/m68k: TCGv returned by gen_load() must be freed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05Merge remote-tracking branch 'remotes/ericb/tags/pull-qapi-2018-03-01-v4' ↵Peter Maydell
into staging qapi patches for 2018-03-01 - Markus Armbruster: Modularize generated QAPI code # gpg: Signature made Fri 02 Mar 2018 19:50:16 GMT # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-qapi-2018-03-01-v4: (30 commits) qapi: Don't create useless directory qapi-generated Fix up dangling references to qmp-commands.* in comment and doc qapi: Move qapi-schema.json to qapi/, rename generated files docs: Correct outdated information on QAPI docs/devel/writing-qmp-commands: Update for modular QAPI qapi: Empty out qapi-schema.json Include less of the generated modular QAPI headers qapi: Generate separate .h, .c for each module watchdog: Consolidate QAPI into single file qapi/common: Fix guardname() for funny filenames qapi/types qapi/visit: Generate built-in stuff into separate files qapi: Make code-generating visitors use QAPIGen more qapi: Rename generated qmp-marshal.c to qmp-commands.c qapi: Record 'include' directives in intermediate representation qapi: Generate in source order qapi: Record 'include' directives in parse tree qapi: Concentrate QAPISchemaParser.exprs updates in .__init__() qapi: Lift error reporting from QAPISchema.__init__() to callers qapi/common: Eliminate QAPISchema.exprs qapi: Improve include file name reporting in error messages ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05README: Document 'git-publish' workflowFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180226030326.20219-3-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05Add a git-publish configuration fileFam Zheng
git-publish [1] is a convenient tool to send patches and has been popular among QEMU developers. Recently it has been made available in Fedora/Debian official repo. One nice feature of the tool is a per-project configuration with profiles, especially in which the cccmd option is a handy method to create the Cc list. [1]: https://github.com/stefanha/git-publish Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180226030326.20219-2-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05tests/libqos: Check for valid dev pointer when looking for PCI devicesThomas Huth
dev could be NULL if the PCI device can not be found due to some reasons, so we must not dereference the pointer in this case. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1519713884-2346-1-git-send-email-thuth@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05util/uri.c: wrap single statement blocks with braces {}Su Hang
For this patch, using curly braces to wrap `if` `while` `else` statements, which only hold single statement. For example: ''' if (cond) statement; ''' to ''' if (cond) { statement; } ''' And using tricks that compare the disassemblies before and after code changes, to make sure code logic isn't changed: ''' git checkout master make util/uri.o strip util/uri.o objdump -Drx util/uri.o > /tmp/uri-master.txt git checkout cleanupbranch make util/uri.o strip util/uri.o objdump -Drx util/uri.o > /tmp/uri-cleanup.txt Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05util/uri.c: remove brackets that wrap `return` statement's content.Su Hang
only remove brackets that wrap `return` statements' content. use `perl -pi -e "s/return \((.*?)\);/return \1;/g" util/uri.c` to remove pattern like this: "return (1);" Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1519533358-13759-3-git-send-email-suhang16@mails.ucas.ac.cn Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05util/uri.c: Coding style check, Only whitespace involvedSu Hang
Using `clang-format -i util/uri.c` first, then change back few code manually, to make sure only whitespace involved. Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1519533358-13759-2-git-send-email-suhang16@mails.ucas.ac.cn Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-05ui/sdl: build as moduleGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-14-kraxel@redhat.com
2018-03-05audio: rename CONFIG_* to CONFIG_AUDIO_*Gerd Hoffmann
This avoids a name clash for CONFIG_SDL, which is used by both sdl video support and sdl audio support. It also more clear that this is a audio driver configuration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-13-kraxel@redhat.com
2018-03-05ui/curses: build as moduleGerd Hoffmann
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS} variables so we can use them for linking the curses module. Also make target/unicore32/helper.o depend on curses which uses curses directly for some reason ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-12-kraxel@redhat.com
2018-03-05ui/gtk: build as moduleGerd Hoffmann
Also drop gtk and vte libs from libs_softmmu, so the libs are not pulled in unless the gtk module actually gets loaded. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-11-kraxel@redhat.com
2018-03-05configure: opengl doesn't depend on x11Gerd Hoffmann
So remove x11 from pkg-config check and don't add x11 cflags/libs to opengl cflags/libs. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-10-kraxel@redhat.com
2018-03-05configure: add X11 vars to config-host.makGerd Hoffmann
Simplifies handling the X11 dependency, also makes ui/Makefile.objs more readable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-9-kraxel@redhat.com
2018-03-05console: add ui module loading supportGerd Hoffmann
If a requested user interface is not available, try loading it as module, simliar to block layer modules. Needed to keep things working when followup patches start to build user interfaces as modules. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-8-kraxel@redhat.com
2018-03-05console: add and use qemu_display_find_defaultGerd Hoffmann
Using the new display registry instead of #ifdefs in vl.c. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-7-kraxel@redhat.com
2018-03-05egl-headless: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-6-kraxel@redhat.com
2018-03-05curses: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-5-kraxel@redhat.com
2018-03-05cocoa: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-4-kraxel@redhat.com
2018-03-05sdl: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-3-kraxel@redhat.com
2018-03-05console: add qemu display registry, add gtkGerd Hoffmann
Add a registry for user interfaces. Add qemu_display_init and qemu_display_early_init helper functions for display initialization. Hook up gtk ui as first user. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-2-kraxel@redhat.com
2018-03-05tap: setting error appropriately when calling net_init_tap_one()Jay Zhou
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(), the followed up device_add virtio-net-pci,netdev=net0 will fail too, prints: TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD ioctl() failed: Bad file descriptor The reason is that the fd of tap is closed when error occured after calling net_init_tap_one(). The fd should be closed when calling net_init_tap_one failed: - if tap_set_sndbuf() failed - if tap_set_sndbuf() succeeded but vhost failed to open or initialize with vhostforce flag on - with wrong vhost command line parameter The fd should not be closed just because vhost failed to open or initialize but without vhostforce flag. So the followed up device_add can fall back to userspace virtio successfully. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05hw/net: Remove unnecessary header includesThomas Huth
Headers like "hw/loader.h" and "qemu/sockets.h" are not needed in the hw/net/*.c files. And Some other headers are included via other headers already, so we can drop them, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Add a new convenience option "--nic" to configure default/on-board NICsThomas Huth
The legacy "-net" option can be quite confusing for the users since most people do not expect to get a "vlan" hub between their emulated guest hardware and the host backend. But so far, we are also not able to get rid of "-net" completely, since it is the only way to configure on-board NICs that can not be instantiated via "-device" yet. It's also a little bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1 -netdev tap,id=n1". So what we need is a new convenience option that is shorter to type than the full -device + -netdev stuff, and which can be used to configure the on-board NICs that can not be handled via -device yet. Thus this patch now provides such a new option "--nic": It adds an entry in the nd_table to configure a on-board / default NIC, creates a host backend and connects the two directly, without a confusing "vlan" hub inbetween. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated way of dumping network packetsThomas Huth
"-net dump" has been marked as deprecated since QEMU v2.10, since it only works with the deprecated 'vlan' parameter (or hubs). Network dumping should be done with "-object filter-dump" nowadays instead. Since nobody complained so far about the deprecation message, let's finally get rid of "-net dump" now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Make net_client_init() staticThomas Huth
The function is only used within net.c, so there's no need that this is a global function. While we're at it, also remove the unused prototype compute_mcast_idx() (the function has been removed in commit d9caeb09b107e91122d10ba4a08a). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Only show vhost-user in the help text if CONFIG_POSIX is definedThomas Huth
According to net/Makefile.objs we only link in the vhost-user code if CONFIG_POSIX has been set. So the help screen should also only show this information if CONFIG_POSIX has been defined. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: List available netdevs with "-netdev help"Thomas Huth
Other options like "-chardev" or "-device" feature a nice help text with the available devices when being called with "help" or "?". Since it is quite useful, especially if you want to see which network backends have been compiled into the QEMU binary, let's provide such a help text for "-netdev", too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Move error reporting from net_init_client/netdev to the calling siteThomas Huth
It looks strange that net_init_client() and net_init_netdev() both take an "Error **errp" parameter, but then do the error reporting with "error_report_err(local_err)" on their own. Let's move the error reporting to the calling site instead to simplify this code a little bit. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-04target/m68k: add fscale, fgetman and fgetexpLaurent Vivier
Using local m68k floatx80_getman(), floatx80_getexp(), floatx80_scale() [copied from previous: Written by Andreas Grabher for Previous, NeXT Computer Emulator.] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180224201802.911-5-laurent@vivier.eu>
2018-03-04softfloat: use floatx80_infinity in softfloatLaurent Vivier
Since f3218a8 ("softfloat: add floatx80 constants") floatx80_infinity is defined but never used. This patch updates floatx80 functions to use this definition. This allows to define a different default Infinity value on m68k: the m68k FPU defines infinity with all bits set to zero in the mantissa. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180224201802.911-4-laurent@vivier.eu>
2018-03-04target/m68k: add fmod/fremLaurent Vivier
Using a local m68k floatx80_mod() [copied from previous: Written by Andreas Grabher for Previous, NeXT Computer Emulator.] The quotient byte of the FPSR is updated with the result of the operation. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180224201802.911-3-laurent@vivier.eu>
2018-03-04softfloat: export some functionsLaurent Vivier
Move fpu/softfloat-macros.h to include/fpu/ Export floatx80 functions to be used by target floatx80 specific implementations. Exports: propagateFloatx80NaN(), extractFloatx80Frac(), extractFloatx80Exp(), extractFloatx80Sign(), normalizeFloatx80Subnormal(), packFloatx80(), roundAndPackFloatx80(), normalizeRoundAndPackFloatx80() Also exports packFloat32() that will be used to implement m68k fsinh, fcos, fsin, ftan operations. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180224201802.911-2-laurent@vivier.eu>
2018-03-04target/m68k: TCGv returned by gen_load() must be freedLaurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180217235920.2254-1-laurent@vivier.eu>
2018-03-02qapi: Don't create useless directory qapi-generatedMarkus Armbruster
We used to generate first test and later QGA QAPI code into qapi-generated/. Commit b93b63f574 moved the test code to tests/. Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The directory has been unused since. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-30-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Fix up dangling references to qmp-commands.* in comment and docMarkus Armbruster
Fix up the reference to qmp-commands.hx in qmp.c. Missed in commit 5032a16d1d. Fix up the reference to qmp-commands.txt in docs/xen-save-devices-state.txt. Missed in commit 4d8bb958fa. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-29-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02docs: Correct outdated information on QAPIMarkus Armbruster
* Fix guidance on error classes * Point to generated documentation * Drop plea for documentation, because the QAPI code generator enforces it since commit 3313b6124b * Minor tweaks here and there Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-27-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02docs/devel/writing-qmp-commands: Update for modular QAPIMarkus Armbruster
With modular code generation, putting stuff right into qapi-schema.json is a bad idea. Update writing-qmp-commands.txt accordingly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-26-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Generate separate .h, .c for each moduleMarkus Armbruster
Our qapi-schema.json is composed of modules connected by include directives, but the generated code is monolithic all the same: one qapi-types.h with all the types, one qapi-visit.h with all the visitors, and so forth. These monolithic headers get included all over the place. In my "build everything" tree, adding a QAPI type recompiles about 4800 out of 5100 objects. We wouldn't write such monolithic headers by hand. It stands to reason that we shouldn't generate them, either. Split up generated qapi-types.h to mirror the schema's modular structure: one header per module. Name the main module's header qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h. Mirror the schema's includes in the headers, so that qapi-types.h gets you everything exactly as before. If you need less, you can include one or more of the sub-module headers. To be exploited shortly. Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h, qmp-commands.c, qapi-event.h, qapi-event.c the same way. qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic. The split of qmp-commands.c duplicates static helper function qmp_marshal_output_str() in qapi-commands-char.c and qapi-commands-misc.c. This happens when commands returning the same type occur in multiple modules. Not worth avoiding. Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and qmp-commands.[ch] to qapi-commands.[ch], name the shards that way already, to reduce churn. This requires temporary hacks in commands.py and events.py. Similarly, c_name() must temporarily be taught to munge '/' in common.py. They'll go away with the rename. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-23-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: declare a dummy variable in each .c file, to shut up OSX toolchain warnings about empty .o files, including hacking c_name()] Signed-off-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-05 07:34:26 +0000