aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-02hw/mips: Express dependencies of the Jazz machine with KconfigPhilippe Mathieu-Daudé
The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ. The framebuffer display is managed by a G364, the network card is a Sonic DP83932. A QLogic ESP216 provides a SCSI bus. None, for the both machine variants (PICA-61 and Magnum 4000), the DP83932 chipset is soldered on the board, and is MMIO-mapped (selected via Chip Select). Therefore we have to enforce the 'select' Kconfig rule (we can not use the 'imply' rule helpful when devices are connected on a bus). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-4-philmd@redhat.com>
2019-07-02hw/mips: Express dependencies of the MIPSsim machine with KconfigPhilippe Mathieu-Daudé
The MIPSsim machine only emulates an 8250 UART and a simple network controller, connected via an ISA bus. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-3-philmd@redhat.com>
2019-07-02hw/mips: Explicit the semi-hosting feature is always requiredPhilippe Mathieu-Daudé
Disabling the semi-hosting feature leads to build failure: LINK mips-softmmu/qemu-system-mips /usr/bin/ld: target/mips/mips-semi.o: in function `helper_do_semihosting': target/mips/mips-semi.c:335: undefined reference to `qemu_semihosting_log_out' /usr/bin/ld: target/mips/mips-semi.c:338: undefined reference to `qemu_semihosting_log_out' collect2: error: ld returned 1 exit status Add a comment to avoid this feature to be disabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-2-philmd@redhat.com>
2019-07-02tests/machine-none: Test recent MIPS cpusPhilippe Mathieu-Daudé
The MIPS I7200 got added in commit d45942d908e, and the I6500 in commit ca1ffd14ed8. Extend the coverage on the little-endian machines. The 4Kc and 20Kc are still covered by the big-endian machines. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701140143.32706-1-philmd@redhat.com>
2019-07-02Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190701' into staging target-arm queue: * hw/arm/boot: fix direct kernel boot with initrd * hw/arm/msf2-som: Exit when the cpu is not the expected one * i.mx7: fix bugs in PCI controller needed to boot recent kernels * aspeed: add RTC device * aspeed: fix some timer device bugs * aspeed: add swift-bmc board * aspeed: vic: Add support for legacy register interface * aspeed: add aspeed-xdma device * Add new sbsa-ref board for aarch64 * target/arm: code refactoring in preparation for support of compilation with TCG disabled # gpg: Signature made Mon 01 Jul 2019 17:38:10 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190701: (46 commits) target/arm: Declare some M-profile functions publicly target/arm: Declare arm_log_exception() function publicly target/arm: Restrict PSCI to TCG target/arm/vfp_helper: Restrict the SoftFloat use to TCG target/arm/vfp_helper: Extract vfp_set_fpscr_from_host() target/arm/vfp_helper: Extract vfp_set_fpscr_to_host() target/arm/vfp_helper: Move code around target/arm: Move TLB related routines to tlb_helper.c target/arm: Declare get_phys_addr() function publicly target/arm: Move CPU state dumping routines to cpu.c target/arm: Move the DC ZVA helper into op_helper target/arm: Fix coding style issues target/arm: Fix multiline comment syntax target/arm/helper: Remove unused include target/arm: Add copyright boilerplate target/arm: Makefile cleanup (softmmu) target/arm: Makefile cleanup (KVM) target/arm: Makefile cleanup (ARM) target/arm: Makefile cleanup (Aarch64) hw/arm: Add arm SBSA reference machine, devices part ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02dump: Move HMP command handlers to dump/Markus Armbruster
Move the HMP handlers related to qapi/dump.json to dump/dump-hmp-cmds.c, where they are covered by MAINTAINERS section "Dump", just like qapi/dump.json. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-18-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [Commit message typo fixed]
2019-07-02MAINTAINERS: Add Windows dump to section "Dump"Markus Armbruster
Commit 2da91b54fe9 "dump: add Windows dump format to dump-guest-memory" neglected to update MAINTAINERS. Do it now. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-17-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02dump: Move the code to dump/Markus Armbruster
Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-16-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split dump.json off misc.jsonMarkus Armbruster
Move commands dump-guest-memory, query-dump, query-dump-guest-memory-capability with their types from misc.json to new dump.json. Add dump.json to MAINTAINERS section "Dump". Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-15-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Rename target.json to misc-target.jsonMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-14-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split machine-target.json off target.json and misc.jsonMarkus Armbruster
Move commands query-cpu-definitions, query-cpu-model-baseline, query-cpu-model-comparison, and query-cpu-model-expansion with their types from target.json to machine-target.json. Also move types CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from misc.json there. Add machine-target.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-13-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Commit message typo fixed]
2019-07-02hw/core: Collect HMP command handlers in hw/core/Markus Armbruster
Move the HMP handlers related to qapi/machine.json to hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS section "Machine core", just like qapi/machine.json. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-12-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02hw/core: Collect QMP command handlers in hw/core/Markus Armbruster
The handlers for qapi/machine.json's QMP commands are spread over cpus.c, hw/core/numa.c, monitor/misc.c, monitor/qmp-cmds.c, and vl.c. Move them all to new hw/core/machine-qmp-cmds.c, where they are covered by MAINTAINERS section "Machine core", just like qapi/machine.json. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-11-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02hw/core: Move numa.c to hw/core/Markus Armbruster
Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-10-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split machine.json off misc.jsonMarkus Armbruster
Move commands cpu-add, query-cpus, query-cpus-fast, query-current-machine, query-hotpluggable-cpus, query-machines, query-memdev, and set-numa-node with their types from misc.json to new machine.json. Also move types X86CPURegister32 and X86CPUFeatureWordInfo. Add machine.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-9-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02MAINTAINERS: Merge sections CPU, NUMA into Machine coreMarkus Armbruster
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-8-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qom: Move HMP command handlers to qom/Markus Armbruster
Move the HMP command handlers related to QOM handlers from monitor/hmp-cmds.c and qdev-monitor.c to new qom/qom-hmp-cmds.c, where they are covered by MAINTAINERS section QOM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-7-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [Also move hmp_info_qom_tree(), tweak commit message accordingly]
2019-07-02Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.defMarkus Armbruster
When commit df2943ba3c7 moved "rm -f qemu-options.def" from distclean to clean, it also added "rm -f $$d/qemu-options.def" to the for d in $(ALL_SUBDIRS) loop. That file doesn't exist. Remove the mistaken rm. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-3-armbru@redhat.com>
2019-07-02Makefile: Remove code to smooth transition to config.statusMarkus Armbruster
When commit bdf523e6923 made configure generate config.status, it added a fallback to Makefile to smooth the transition, with a TODO "code can be removed after QEMU 1.7." It's been more than five years. Remove it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-2-armbru@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into stagingPeter Maydell
- cleanup/refactoring in the cpu feature code - fix for a tcg test case - halt/clear support for vfio-ccw, and use a new helper # gpg: Signature made Mon 01 Jul 2019 12:08:41 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190701: s390x: add cpu feature/model files to KVM section vfio-ccw: support async command subregion vfio-ccw: use vfio_set_irq_signaling s390x/cpumodel: Prepend KDSA features with "KDSA" s390x/cpumodel: Rework CPU feature definition tests/tcg/s390x: Fix alignment of csst parameter list Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request No user-visible changes. # gpg: Signature made Fri 28 Jun 2019 14:13:41 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: build: use $(DESTDIR)x instead of $(DESTDIR)/x Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02qom: Move QMP command handlers to qom/Markus Armbruster
The handlers for qapi/qom.json's QMP commands are in monitor/qmp-cmds.c. Move them to new qom/qom-qmp-cmds.c, where they are covered by MAINTAINERS section QOM, just like qapi/qom.json. Move along qmp_device_list_properties() even though it's specified in qapi/qdev.json, because it's so similar to qmp_qom_list_properties(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-6-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split qom.json and qdev.json off misc.jsonMarkus Armbruster
Move commands object-add, object-del, qom-get, qom-list, qom-list-properties, qom-list-types, and qom-set with their types from misc.json to new qom.json. Move commands device-list-properties, device_add, device-del, and event DEVICE_DELETED from misc.json to new qdev.json. Add both new files to MAINTAINERS section QOM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-5-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Straightforwardly updated for "MAINTAINERS: Make section "QOM" cover qdev as well"]
2019-07-02hmp: Move hmp.h to include/monitor/Markus Armbruster
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-4-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02Makefile: Don't add monitor/ twice to common-obj-yMarkus Armbruster
Both commit f1b3ccfaa68 "monitor: Move {hmp, qmp}.c to monitor/{hmp, qmp}-cmds.c" and commit 7e3c0deab1b "monitor: Split out monitor/qmp.c" added monitor/ to common-obj-y ifeq ($(CONFIG_SOFTMMU),y). Revert the second addition. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-3-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02MAINTAINERS: Make section "QOM" cover qdev as wellMarkus Armbruster
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02MAINTAINERS: new maintainers for QOMPaolo Bonzini
QOM is not a particularly active subsystem now: 51 commits in two years. But, we need active maintainers to review and merge patches, and Git shows the following top committers taking on QOM: Markus Armbruster <armbru@redhat.com> Eduardo Habkost <ehabkost@redhat.com> Paolo Bonzini <pbonzini@redhat.com> Marc-André Lureau <marcandre.lureau@redhat.com> Eric Blake <eblake@redhat.com> I volunteer myself, and also volunteer Eduardo and Daniel as reviewers since they understand the code well. Cc: Andreas Färber <afaerber@suse.de> Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-2-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Andreas Färber <afaerber@suse.de>
2019-07-02migration/colo.c: Add missed filter notify for Xen COLO.Zhang Chen
We need to notify net filter to do checkpoint for Xen COLO, like KVM side. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02COLO-compare: Add colo-compare remote notify supportZhang Chen
This patch make colo-compare can send message to remote COLO frame(Xen) when occur checkpoint. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02COLO-compare: Make the compare_chr_send() can send notification message.Zhang Chen
We need use this function to send notification message for remote colo-frame(Xen). So we add new parameter for this job. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02COLO-compare: Add remote notification chardev handler frameZhang Chen
Add chardev handler to send notification to remote(current from Xen) colo-frame. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02COLO-compare: Add new parameter to communicate with remote colo-frameZhang Chen
We add the "notify_dev=chardevID" parameter. After that colo-compare can connect with remote(currently just for Xen, KVM-COLO didn't need it.) colo-frame through chardev socket, it can notify remote(Xen) colo-frame to handle checkpoint event. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Expand test for stopping self announceDr. David Alan Gilbert
Expand self-announce test to check we can stop an announce timer. We set it up to send 300 packets, but after we receive the first one we tell it to stop. We error if: a) We receive more than 30 of the packets b) We're still receiving packets after a lot longer than the 30 seconds should have arrived Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Add HMP optional IDDr. David Alan Gilbert
Add the optional ID to the HMP command. e.g. # start an announce for a long time on eth1 migrate_set_parameter announce-rounds 1000 announce_self "eth1" e1 # start an announce on eth2 announce_self "eth2" e2 # Change e1 to be announcing on eth1 and eth3 announce_self "eth1,eth3" e1 # Cancel e1 migrate_set_parameter announce-rounds 0 announce_self "" e1 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Add optional IDDr. David Alan Gilbert
Previously there was a single instance of the timer used by monitor triggered announces, that's OK, but when combined with the previous change that lets you have announces for subsets of interfaces it's a bit restrictive if you want to do different things to different interfaces. Add an 'id' field to the announce, and maintain a list of the timers based on id. This allows you to for example: a) Start an announce going on interface eth0 for a long time b) Start an announce going on interface eth1 for a long time c) Kill the announce on eth0 while leaving eth1 going. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Add HMP optional interface listDr. David Alan Gilbert
Add the optional interface list to the HMP command. i.e. All interfaces announce_self Just the named interfaces: announce_self vn1,vn2 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Allow optional list of interfacesDr. David Alan Gilbert
Allow the caller to restrict the set of interfaces that announces are sent on. The default is still to send on all interfaces. e.g. { "execute": "announce-self", "arguments": { "initial": 50, "max": 550, "rounds": 5, "step": 50, "interfaces": ["vn2", "vn1"] } } This doesn't affect the behaviour of migraiton announcments. Note: There's still only one timer for the qmp command, so that performing an 'announce-self' on one list of interfaces followed by another 'announce-self' on another list will stop the announces on the existing set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net: remove unused get_str_sep() functionStefano Garzarella
Since the get_str_sep() function is no longer used in net/net.c, we can remove it. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net: use g_strsplit() for parsing host address and portStefano Garzarella
Use the glib function to split host address and port in the parse_host_port() function. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net: avoid using variable length array in net_client_init()Stefano Garzarella
net_client_init() uses a variable length array to store the prefix of 'ipv6-net' parameter (e.g. if ipv6-net=fec0::0/64, the prefix is 'fec0::0'). This patch introduces g_strsplit() to split the 'ipv6-net' parameter, so we can remove the variable length array. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net: fix assertion failure when ipv6-prefixlen is not a numberStefano Garzarella
If 'ipv6-prefixlen' is not a number, the current behaviour produces an assertion failure: $ qemu-system-x86_64 -net user,ipv6-net=feca::0/a qemu-system-x86_64: qemu/util/qemu-option.c:1175: qemu_opts_foreach: Assertion `!errp || !*errp' failed. Aborted (core dumped) This patch fixes it, jumping to the end of the function when 'ipv6-prefixlen' is not a number, and printing the more friendly message: $ qemu-system-x86_64 -net user,ipv6-net=feca::0/a qemu-system-x86_64: Parameter 'ipv6-prefixlen' expects a number Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02ftgmac100: do not link to netdevCédric Le Goater
qdev_set_nic_properties() is already used in the Aspeed SoC level to bind the ftgmac100 device to the netdev. This is fixing support for multiple net devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02qemu-bridge-helper: Document known shortcomingsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02MAINTAINERS: Add qemu-bridge-helper.c to "Network device backends"Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02block/stream: introduce a bottom nodeAndrey Shinkevich
The bottom node is the intermediate block device that has the base as its backing image. It is used instead of the base node while a block stream job is running to avoid dependency on the base that may change due to the parallel jobs. The change may take place due to a filter node as well that is inserted between the base and the intermediate bottom node. It occurs when the base node is the top one for another commit or stream job. After the introduction of the bottom node, don't freeze its backing child, that's the base, anymore. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1559152576-281803-4-git-send-email-andrey.shinkevich@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02block/stream: refactor stream_run: drop gotoAndrey Shinkevich
The goto is unnecessary in the stream_run() since the common exit code was removed in the commit eb23654dbe43b549ea2a9ebff9d8e: "jobs: utilize job_exit shim". Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1559152576-281803-3-git-send-email-andrey.shinkevich@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02block: include base when checking image chain for block allocationAndrey Shinkevich
This patch is used in the 'block/stream: introduce a bottom node' that is following. Instead of the base node, the caller may pass the node that has the base as its backing image to the function bdrv_is_allocated_above() with a new parameter include_base = true and get rid of the dependency on the base that may change during commit/stream parallel jobs. Now, if the specified base is not found in the backing image chain, the QEMU will abort. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com [mreitz: Squashed in the following as a rebase on conflicting patches:] Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02block/rbd: increase dynamically the image sizeStefano Garzarella
RBD APIs don't allow us to write more than the size set with rbd_create() or rbd_resize(). In order to support growing images (eg. qcow2), we resize the image before write operations that exceed the current size. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190509145927.293369-1-sgarzare@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02hw/block/pflash_cfi02: Reduce I/O accesses to 16-bitPhilippe Mathieu-Daudé
Parallel NOR flashes are limited to 16-bit bus accesses. Remove the 32-bit dead code. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190627202719.17739-29-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Document commandsPhilippe Mathieu-Daudé
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190627202719.17739-28-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 12:44:14 +0000