aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-02sunhme: fix incorrect constant in sunhme_can_receive()Mark Cave-Ayland
Due to a copy/paste error the wrong register was being checked in order to determine if the NIC is able to receive data. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-02sunhme: add trace event for logging PCI IRQMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-02sun4m: set default display type to TCXMark Cave-Ayland
Commit 6807874d55 "sun4m: obey -vga none" changed the sun4m machines so that they could be started without a framebuffer installed, but as no default display type was configured the machines would start in headless mode without an explict -vga option. Set the default display type for all sun4m machines to TCX so that they will start with a framebuffer if one is not specifically requested. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-02vfio/pci: Trace vfio_set_irq_signaling() failure in vfio_msix_vector_release()Eric Auger
Report an error in case we fail to set a trigger action on any VFIO_PCI_MSIX_IRQ_INDEX subindex. This might be useful in debugging a device that is not working properly. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Coverity (CID 1402196) Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-07-02vfio-common.h: Remove inaccurate commentFabiano Rosas
This is a left-over from "f4ec5e26ed vfio: Add host side DMA window capabilities", which added support to more than one DMA window. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190702' ↵Peter Maydell
into staging ppc patch queue 2019-07-2 Here's my next pull request for qemu-4.1. I'm not sure if this will squeak in just before the soft freeze, or just after. I don't think it really matters - most of this is bugfixes anyway. There's some cleanups which aren't stictly bugfixes, but which I think are safe enough improvements to go in the soft freeze. There's no true feature work. Unfortunately, I wasn't able to complete a few of my standard battery of pre-pull tests, due to some failures that appear to also be in master. I'm hoping that hasn't missed anything important in here. Highlights are: * A number of fixe and cleanups for the XIVE implementation * Cleanups to the XICS interrupt controller to fit better with the new XIVE code * Numerous fixes and improvements to TCG handling of ppc vector instructions * Remove a number of unnnecessary #ifdef CONFIG_KVM guards * Fix some errors in the PCI hotplug paths * Assorted other fixes # gpg: Signature made Tue 02 Jul 2019 07:07:15 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190702: (49 commits) spapr/xive: Add proper rollback to kvmppc_xive_connect() ppc/xive: Fix TM_PULL_POOL_CTX special operation ppc/pnv: Rework cache watch model of PnvXIVE ppc/xive: Make the PIPR register readonly ppc/xive: Force the Physical CAM line value to group mode spapr/xive: simplify spapr_irq_init_device() to remove the emulated init spapr/xive: rework the mapping the KVM memory regions spapr_pci: Unregister listeners before destroying the IOMMU address space target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro target/ppc: decode target register in VSX_EXTRACT_INSERT at translation time target/ppc: decode target register in VSX_VECTOR_LOAD_STORE_LENGTH at translation time target/ppc: introduce GEN_VSX_HELPER_R2_AB macro to fpu_helper.c target/ppc: introduce GEN_VSX_HELPER_R2 macro to fpu_helper.c target/ppc: introduce GEN_VSX_HELPER_R3 macro to fpu_helper.c target/ppc: introduce GEN_VSX_HELPER_X1 macro to fpu_helper.c target/ppc: introduce GEN_VSX_HELPER_X2_AB macro to fpu_helper.c target/ppc: introduce GEN_VSX_HELPER_X2 macro to fpu_helper.c target/ppc: introduce separate generator and helper for xscvqpdp target/ppc: introduce GEN_VSX_HELPER_X3 macro to fpu_helper.c target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch ↵Peter Maydell
'remotes/philmd-gitlab/tags/pflash-next-20190701' into staging Implement the following AMD command-set parallel flash functionality: - nonuniform sector sizes; - erase suspend/resume commands; and - multi-sector erase. # gpg: Signature made Tue 02 Jul 2019 01:54:33 BST # gpg: using RSA key E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/pflash-next-20190701: (27 commits) hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit hw/block/pflash_cfi02: Document commands hw/block/pflash_cfi02: Use chip erase time specified in the CFI table hw/block/pflash_cfi02: Implement erase suspend/resume hw/block/pflash_cfi02: Implement multi-sector erase hw/block/pflash_cfi02: Fix reset command not ignored during erase hw/block/pflash_cfi02: Fix CFI in autoselect mode hw/block/pflash_cfi02: Split if() condition hw/block/pflash_cfi02: Extract pflash_regions_count() hw/block/pflash_cfi02: Implement nonuniform sector sizes hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported hw/block/pflash_cfi02: Hold the PRI table offset in a variable hw/block/pflash_cfi02: Document the current CFI values hw/block/pflash_cfi02: Remove pointless local variable tests/pflash-cfi02: Refactor to support testing multiple configurations hw/block/pflash_cfi02: Fix command address comparison hw/block/pflash_cfi02: Unify the MemoryRegionOps hw/block/pflash_cfi02: Extract the pflash_data_read() function hw/block/pflash_cfi02: Use the ldst API in pflash_read() hw/block/pflash_cfi02: Use the ldst API in pflash_write() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02virtio-pci: Allow to specify additional interfaces for the base typeDavid Hildenbrand
Let's allow to specify additional interfaces for the base type (e.g. later TYPE_MEMORY_DEVICE), something that was possible before the rework of virtio PCI device instantiation. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190619094907.10131-3-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-02virtio-pmem: add virtio devicePankaj Gupta
This is the implementation of virtio-pmem device. Support will require machine changes for the architectures that will support it, so it will not yet be compiled. It can be unlocked with VIRTIO_PMEM_SUPPORTED per machine and disabled globally via VIRTIO_PMEM. We cannot use the "addr" property as that is already used e.g. for virtio-pci/pci devices. And we will have e.g. virtio-pmem-pci as a proxy. So we have to choose a different one (unfortunately). "memaddr" it is. That name should ideally be used by all other virtio-* based memory devices in the future. -device virtio-pmem-pci,id=p0,bus=bux0,addr=0x01,memaddr=0x1000000... Acked-by: Markus Armbruster <armbru@redhat.com> [ QAPI bits ] Signed-off-by: Pankaj Gupta <pagupta@redhat.com> [ MemoryDevice/MemoryRegion changes, cleanups, addr property "memaddr", split up patches, unplug handler ] Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190619094907.10131-2-pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-07-02' ↵Peter Maydell
into staging Block patches for 4.1-rc0: - The stream job no longer relies on a fixed base node - The rbd block driver can now accomodate growing formats like qcow2 # gpg: Signature made Tue 02 Jul 2019 02:56:06 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-07-02: block/stream: introduce a bottom node block/stream: refactor stream_run: drop goto block: include base when checking image chain for block allocation block/rbd: increase dynamically the image size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 02 Jul 2019 03:21:54 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: migration/colo.c: Add missed filter notify for Xen COLO. COLO-compare: Add colo-compare remote notify support COLO-compare: Make the compare_chr_send() can send notification message. COLO-compare: Add remote notification chardev handler frame COLO-compare: Add new parameter to communicate with remote colo-frame net/announce: Expand test for stopping self announce net/announce: Add HMP optional ID net/announce: Add optional ID net/announce: Add HMP optional interface list net/announce: Allow optional list of interfaces net: remove unused get_str_sep() function net: use g_strsplit() for parsing host address and port net: avoid using variable length array in net_client_init() net: fix assertion failure when ipv6-prefixlen is not a number ftgmac100: do not link to netdev qemu-bridge-helper: Document known shortcomings MAINTAINERS: Add qemu-bridge-helper.c to "Network device backends" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02linux-user: move QEMU_IFLA_BR_MULTI_BOOLOPT to the good functionLaurent Vivier
QEMU_IFLA_BR_MULTI_BOOLOPT has been added to the wrong function host_to_target_slave_data_bridge_nlattr(). Move it to host_to_target_data_bridge_nlattr(). This fixes following error: Unknown QEMU_IFLA_BR type 46 Fixes: 61b463fbf6cb ("linux-user: add new netlink types") Message-Id: <20190626150855.27446-1-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02linux-user: Handle EXCP_FPE properly for MIPSAleksandar Markovic
Handle EXCP_FPE properly for MIPS in cpu loop. Note that a vast majority of FP instructions are not affected by the absence of the code in this patch, as they use alternative code paths for handling floating point exceptions (see, for example, invocations of update_fcr31()) - they rely on softfloat library for keeping track on exceptions that needs to be raised. However, there are few MIPS FP instructions (an example is CTC1) that use function do_raise_exception() directly, and they need the case that is added in this patch to propagate the FPE exception as designed. The code is based on kernel's function force_fcr31_sig() in arch/mips/kernel.traps.c. Reported-by: Yunqiang Su <ysu@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1561718618-20218-6-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02linux-user: Introduce TARGET_HAVE_ARCH_STRUCT_FLOCKAleksandar Markovic
Bring target_flock definitions to be more in sync with the way flock is defined in kernel. Basically, the rules from the kernel are: 1. Majority of architectures have a common flock definition. 2. Architectures with 32-bit MIPS ABIs have a sligtly different flock definition; those architectures are the only arcitectures that have HAVE_ARCH_STRUCT_FLOCK defined, and that preprocessor constant is used in the common header as a flag for including or not including common flock definition. 3. Sparc architectures also have a sligtly different flock definition, but the difference is only the padding at the end of the structure. The presence of that padding is determined by preprocessor constants __ARCH_FLOCK6_PAD and __ARCH_FLOCK64_PAD. QEMU linux-user already implements rules 1. and 3. in a very similar way as they are implemented in kernel. However, rule 2. is implemented in a dissimilar way (for example, the constant TARGET_HAVE_ARCH_STRUCT_FLOCK is missing), and this patch brings QEMU implementation much closer to the kernel implementation. TARGET_HAVE_ARCH_STRUCT_FLOCK64 constant is also introduced to mimic HAVE_ARCH_STRUCT_FLOCK64 from kernel, but it is not defined anywhere, however, this is the case with HAVE_ARCH_STRUCT_FLOCK64 in kernel as well. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1561718618-20218-5-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02linux-user: Fix target_flock structure for MIPS O64 ABIAleksandar Markovic
Among MIPS ABIs, only MIPS O32 and N32 have special (different than other architectures) definition of structure flock in kernel. Bring target_flock definition in QEMU for MIPS O64 ABI to the correct state, which is currently different than the most common definition, and it should actually be the same. Reported-by: Dragan Mladjenovic <dmladjenovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1561718618-20218-4-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02linux-user: Add support for strace for statx() syscallJim Wilson
All of the flags need to be conditional as old systems don't have statx support. Otherwise it works the same as other stat family syscalls. This requires the pending patch to add statx support. Tested on Ubuntu 16.04 (no host statx) and Ubuntu 19.04 (with host statx) using a riscv32-linux toolchain. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1561718618-20218-3-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02linux-user: Add support for translation of statx() syscallAleksandar Rikalo
Implement support for translation of system call statx(). The implementation is based on "best effort" approach: if host is capable of executing statx(), host statx() is used. If not, the implementation includes invoking a more mature system call fstatat() on the host side to achieve as close as possible functionality. Support for statx() in kernel and glibc was, however, introduced at different points of time (the difference is more than a year): - kernel: Linux 4.11 (30 April 2017) - glibc: glibc 2.28 (1 Aug 2018) In this patch, the availability of statx() support is established via __NR_statx (if it is defined, statx() is considered available). This coincedes with statx() introduction in kernel. However, the structure statx definition may not be available in any header for hosts with glibc older than 2.28 (and it is, by design, to be defined in one of glibc headers), even though the full statx() functionality may be supported in kernel. Hence, a structure "target_statx" is defined in this patch, to remove that dependency on glibc headers, and to use statx() functionality as soon as the host kernel is capable of supporting it. Such statx structure definition is used for both target and host structures statx (of course, this doesn't mean the endian arrangement is the same on target and host - the endian conversion is done in all necessary cases). Signed-off-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1561718618-20218-2-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-20190701' ↵Peter Maydell
into staging qemu-openbios queue # gpg: Signature made Mon 01 Jul 2019 18:47:32 BST # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-20190701: Update OpenBIOS images to c79e0ec built from submodule. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02target/mips: Correct helper for MSA FCLASS.<W|D> instructionsAleksandar Markovic
Correct helper for MSA FCLASS.<W|D> instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02target/mips: Unroll loops for MSA float max/min instructionsAleksandar Markovic
Slight preformance improvement for MSA float max/min instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02target/mips: Correct comments in msa_helper.cAleksandar Markovic
Fix some errors in comments for MSA helpers. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02target/mips: Correct comments in translate.cAleksandar Markovic
Fix some checkpatch comment-related warnings. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1562068213-11307-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tcg/tests: target/mips: Correct MSA test compilation and execution orderAleksandar Markovic
Correct MSA test compilation and execution order, for the sake of consistence. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tcg/tests: target/mips: Amend MSA integer multiply testsAleksandar Markovic
Amend MSA fixed point multiply tests: correct output values for MADDV.B, MADDV.H, MADDV.W, MADDV.D, MSUBV.B, MSUBV.H, MSUBV.W and MSUBD.D. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tcg/tests: target/mips: Amend MSA fixed point multiply testsAleksandar Markovic
Amend MSA fixed point multiply tests: add tests for MADD_Q.H, MADD_Q.W, MADDR_Q.H, MADDR_Q.W, MSUB_Q.H, MSUB_Q.W, MSUBR_Q.H and MSUBR_Q.W. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02hw/mips: Express dependencies of the r4k platform with KconfigPhilippe Mathieu-Daudé
This platform use standard PC devices connected to an ISA bus. Networking is provided by a ne2000 chipset. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-5-philmd@redhat.com>
2019-07-02hw/mips: Express dependencies of the Jazz machine with KconfigPhilippe Mathieu-Daudé
The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ. The framebuffer display is managed by a G364, the network card is a Sonic DP83932. A QLogic ESP216 provides a SCSI bus. None, for the both machine variants (PICA-61 and Magnum 4000), the DP83932 chipset is soldered on the board, and is MMIO-mapped (selected via Chip Select). Therefore we have to enforce the 'select' Kconfig rule (we can not use the 'imply' rule helpful when devices are connected on a bus). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-4-philmd@redhat.com>
2019-07-02hw/mips: Express dependencies of the MIPSsim machine with KconfigPhilippe Mathieu-Daudé
The MIPSsim machine only emulates an 8250 UART and a simple network controller, connected via an ISA bus. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-3-philmd@redhat.com>
2019-07-02hw/mips: Explicit the semi-hosting feature is always requiredPhilippe Mathieu-Daudé
Disabling the semi-hosting feature leads to build failure: LINK mips-softmmu/qemu-system-mips /usr/bin/ld: target/mips/mips-semi.o: in function `helper_do_semihosting': target/mips/mips-semi.c:335: undefined reference to `qemu_semihosting_log_out' /usr/bin/ld: target/mips/mips-semi.c:338: undefined reference to `qemu_semihosting_log_out' collect2: error: ld returned 1 exit status Add a comment to avoid this feature to be disabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-2-philmd@redhat.com>
2019-07-02tests/machine-none: Test recent MIPS cpusPhilippe Mathieu-Daudé
The MIPS I7200 got added in commit d45942d908e, and the I6500 in commit ca1ffd14ed8. Extend the coverage on the little-endian machines. The 4Kc and 20Kc are still covered by the big-endian machines. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701140143.32706-1-philmd@redhat.com>
2019-07-02Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190701' into staging target-arm queue: * hw/arm/boot: fix direct kernel boot with initrd * hw/arm/msf2-som: Exit when the cpu is not the expected one * i.mx7: fix bugs in PCI controller needed to boot recent kernels * aspeed: add RTC device * aspeed: fix some timer device bugs * aspeed: add swift-bmc board * aspeed: vic: Add support for legacy register interface * aspeed: add aspeed-xdma device * Add new sbsa-ref board for aarch64 * target/arm: code refactoring in preparation for support of compilation with TCG disabled # gpg: Signature made Mon 01 Jul 2019 17:38:10 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190701: (46 commits) target/arm: Declare some M-profile functions publicly target/arm: Declare arm_log_exception() function publicly target/arm: Restrict PSCI to TCG target/arm/vfp_helper: Restrict the SoftFloat use to TCG target/arm/vfp_helper: Extract vfp_set_fpscr_from_host() target/arm/vfp_helper: Extract vfp_set_fpscr_to_host() target/arm/vfp_helper: Move code around target/arm: Move TLB related routines to tlb_helper.c target/arm: Declare get_phys_addr() function publicly target/arm: Move CPU state dumping routines to cpu.c target/arm: Move the DC ZVA helper into op_helper target/arm: Fix coding style issues target/arm: Fix multiline comment syntax target/arm/helper: Remove unused include target/arm: Add copyright boilerplate target/arm: Makefile cleanup (softmmu) target/arm: Makefile cleanup (KVM) target/arm: Makefile cleanup (ARM) target/arm: Makefile cleanup (Aarch64) hw/arm: Add arm SBSA reference machine, devices part ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02dump: Move HMP command handlers to dump/Markus Armbruster
Move the HMP handlers related to qapi/dump.json to dump/dump-hmp-cmds.c, where they are covered by MAINTAINERS section "Dump", just like qapi/dump.json. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-18-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [Commit message typo fixed]
2019-07-02MAINTAINERS: Add Windows dump to section "Dump"Markus Armbruster
Commit 2da91b54fe9 "dump: add Windows dump format to dump-guest-memory" neglected to update MAINTAINERS. Do it now. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-17-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02dump: Move the code to dump/Markus Armbruster
Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-16-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split dump.json off misc.jsonMarkus Armbruster
Move commands dump-guest-memory, query-dump, query-dump-guest-memory-capability with their types from misc.json to new dump.json. Add dump.json to MAINTAINERS section "Dump". Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-15-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Rename target.json to misc-target.jsonMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-14-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split machine-target.json off target.json and misc.jsonMarkus Armbruster
Move commands query-cpu-definitions, query-cpu-model-baseline, query-cpu-model-comparison, and query-cpu-model-expansion with their types from target.json to machine-target.json. Also move types CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from misc.json there. Add machine-target.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-13-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Commit message typo fixed]
2019-07-02hw/core: Collect HMP command handlers in hw/core/Markus Armbruster
Move the HMP handlers related to qapi/machine.json to hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS section "Machine core", just like qapi/machine.json. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-12-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02hw/core: Collect QMP command handlers in hw/core/Markus Armbruster
The handlers for qapi/machine.json's QMP commands are spread over cpus.c, hw/core/numa.c, monitor/misc.c, monitor/qmp-cmds.c, and vl.c. Move them all to new hw/core/machine-qmp-cmds.c, where they are covered by MAINTAINERS section "Machine core", just like qapi/machine.json. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-11-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02hw/core: Move numa.c to hw/core/Markus Armbruster
Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-10-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split machine.json off misc.jsonMarkus Armbruster
Move commands cpu-add, query-cpus, query-cpus-fast, query-current-machine, query-hotpluggable-cpus, query-machines, query-memdev, and set-numa-node with their types from misc.json to new machine.json. Also move types X86CPURegister32 and X86CPUFeatureWordInfo. Add machine.json to MAINTAINERS section "Machine core". Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-9-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02MAINTAINERS: Merge sections CPU, NUMA into Machine coreMarkus Armbruster
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-8-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qom: Move HMP command handlers to qom/Markus Armbruster
Move the HMP command handlers related to QOM handlers from monitor/hmp-cmds.c and qdev-monitor.c to new qom/qom-hmp-cmds.c, where they are covered by MAINTAINERS section QOM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-7-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [Also move hmp_info_qom_tree(), tweak commit message accordingly]
2019-07-02Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.defMarkus Armbruster
When commit df2943ba3c7 moved "rm -f qemu-options.def" from distclean to clean, it also added "rm -f $$d/qemu-options.def" to the for d in $(ALL_SUBDIRS) loop. That file doesn't exist. Remove the mistaken rm. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-3-armbru@redhat.com>
2019-07-02Makefile: Remove code to smooth transition to config.statusMarkus Armbruster
When commit bdf523e6923 made configure generate config.status, it added a fallback to Makefile to smooth the transition, with a TODO "code can be removed after QEMU 1.7." It's been more than five years. Remove it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-2-armbru@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into stagingPeter Maydell
- cleanup/refactoring in the cpu feature code - fix for a tcg test case - halt/clear support for vfio-ccw, and use a new helper # gpg: Signature made Mon 01 Jul 2019 12:08:41 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190701: s390x: add cpu feature/model files to KVM section vfio-ccw: support async command subregion vfio-ccw: use vfio_set_irq_signaling s390x/cpumodel: Prepend KDSA features with "KDSA" s390x/cpumodel: Rework CPU feature definition tests/tcg/s390x: Fix alignment of csst parameter list Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request No user-visible changes. # gpg: Signature made Fri 28 Jun 2019 14:13:41 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: build: use $(DESTDIR)x instead of $(DESTDIR)/x Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02qom: Move QMP command handlers to qom/Markus Armbruster
The handlers for qapi/qom.json's QMP commands are in monitor/qmp-cmds.c. Move them to new qom/qom-qmp-cmds.c, where they are covered by MAINTAINERS section QOM, just like qapi/qom.json. Move along qmp_device_list_properties() even though it's specified in qapi/qdev.json, because it's so similar to qmp_qom_list_properties(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-6-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02qapi: Split qom.json and qdev.json off misc.jsonMarkus Armbruster
Move commands object-add, object-del, qom-get, qom-list, qom-list-properties, qom-list-types, and qom-set with their types from misc.json to new qom.json. Move commands device-list-properties, device_add, device-del, and event DEVICE_DELETED from misc.json to new qdev.json. Add both new files to MAINTAINERS section QOM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-5-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [Straightforwardly updated for "MAINTAINERS: Make section "QOM" cover qdev as well"]
2019-07-02hmp: Move hmp.h to include/monitor/Markus Armbruster
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190619201050.19040-4-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 01:43:35 +0000