aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-27qdev: move qdev->info to classAnthony Liguori
Right now, DeviceInfo acts as the class for qdev. In order to switch to a proper ObjectClass derivative, we need to ween all of the callers off of interacting directly with the info pointer. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: integrate with QEMU Object Model (v2)Anthony Liguori
This is a very shallow integration. We register a TYPE_DEVICE but only use QOM as basically a memory allocator. This will make all devices show up as QOM objects but they will all carry the TYPE_DEVICE. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - update for new location of object.h
2012-01-27qom: add the base Object class (v2)Anthony Liguori
This class provides the main building block for QEMU Object Model and is extensively documented in the header file. It is largely inspired by GObject. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - remove printf() in type registration - fix typo in comment (Paolo) - make Interface private - move object into a new directory and move header into include/qemu/ - don't make object.h depend on qemu-common.h - remove Type and replace it with TypeImpl * (Paolo) - use hash table to store types (Paolo) - aggressively cache parent type (Paolo) - make a type_register and use it with interfaces (Paolo) - fix interface cast comment (Paolo) - add a few more functions required in later series
2012-01-27pci: call reset unconditionallyAnthony Liguori
Because now all PCI devices are converted to qdev. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27openpic: remove dead code to make a PCI device versionAnthony Liguori
bus is always NULL so the code in this if clause is dead (and therefore untested). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27macio: convert to qdevAnthony Liguori
This is a "shallow", half hearted, and untested conversion. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27Merge remote-tracking branch 'pmaydell/arm-devs.for-upstream' into stagingAnthony Liguori
* pmaydell/arm-devs.for-upstream: arm: SoC model for Calxeda Highbank arm_boot: support board IDs more than 16 bits wide arm: add secondary cpu boot callbacks to arm_boot.c ahci: add support for non-PCI based controllers Add xgmac ethernet model
2012-01-27Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (22 commits) scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command qcow: Use bdrv functions to replace file operation qcow: Return real error code in qcow_open block/vdi: Zero unused parts when allocating a new block (fix #919242) virtio-blk: add virtio_blk_handle_read trace event docs: describe live block operations block: add support for partial streaming add QERR_BASE_NOT_FOUND block: add bdrv_find_backing_image blockdev: make image streaming safe across hotplug qmp: add query-block-jobs qmp: add block_job_cancel command qmp: add block_job_set_speed command qmp: add block_stream command block: rate-limit streaming operations block: add image streaming block job block: add BlockJob interface for long-running operations block: make copy-on-read a per-request flag block: check bdrv_in_use() before blockdev operations coroutine: add co_sleep_ns() coroutine sleep function ...
2012-01-27qemu-io: end aio help text sentences with periodsLaszlo Ersek
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-27./configure: export xfs config via --{enable, disable}-xfsctlSergei Trofimovich
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-27pcnet: Preserve link state across device resetJan Kiszka
A device reset does not affect the link state, only set_link does. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-27e1000: Preserve link state across device resetJan Kiszka
A device reset does not affect the link state, only set_link does. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-27qdev-property: Make bit property parsing stricterJan Kiszka
By using strncasecmp, we allow for arbitrary characters after the "on"/"off" string. Fix this by switching to strcasecmp. Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-27remove #if 0 code for timersPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-26scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_commandThomas Higdon
Limit the return value (corresponding to the length of the buffer to be DMAed back to the intiator) to the value in req->cmd.xfer, which is the amount of data that the initiator expects. Eliminate now-duplicate code that does this guarding in the functions for individual commands. Without this, the SCRIPTS code in the emulated LSI device eventually raises a DMA interrupt for a data overrun when an INQUIRY command whose buflen exceeds req->cmd.xfer is processed. It's the responsibility of the client to provide a request buffer and allocation length that are large enough for the result of the command. Signed-off-by: Thomas Higdon <thigdon@akamai.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Use bdrv functions to replace file operationLi Zhi Hui
Since common file operation functions lack of error detection and use much more I/O syscalls, so change them to bdrv series functions and reduce I/O request. Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qcow: Return real error code in qcow_openLi Zhi Hui
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block/vdi: Zero unused parts when allocating a new block (fix #919242)Stefan Weil
The new block was filled with zero when it was allocated by g_malloc0, but when it was reused later and only partially used, data from the previously allocated block were still present and written to the new block. This caused the problems reported by bug #919242 (https://bugs.launchpad.net/qemu/+bug/919242). Now the unused parts of the new block which are before and after the data are always filled with zero, so it is no longer necessary to zero the whole block with g_malloc0. I also updated the copyright comment. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26virtio-blk: add virtio_blk_handle_read trace eventStefan Hajnoczi
There already exists a virtio_blk_handle_write trace event as well as completion events. Add the virtio_blk_handle_read event so it's easy to trace virtio-blk requests for both read and write operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26docs: describe live block operationsMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: add support for partial streamingMarcelo Tosatti
Add support for streaming data from an intermediate section of the image chain (see patch and documentation for details). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26add QERR_BASE_NOT_FOUNDMarcelo Tosatti
This qerror will be raised when a given streaming base (backing file) cannot be found. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: add bdrv_find_backing_imageMarcelo Tosatti
Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id, traverse the backing image chain to locate the id. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26blockdev: make image streaming safe across hotplugStefan Hajnoczi
Unplugging a storage interface like virtio-blk causes the host block device to be deleted too. Long-running operations like block migration must take a DriveInfo reference to prevent the BlockDriverState from being freed. For image streaming we can do the same thing. Note that it is not possible to acquire/release the drive reference in block.c where the block job functions live because drive_get_ref()/drive_put_ref() are blockdev.c functions. Calling them from block.c would be a layering violation - tools like qemu-img don't even link against blockdev.c. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add query-block-jobsStefan Hajnoczi
Add query-block-jobs, which shows the progress of ongoing block device operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_set_speed commandStefan Hajnoczi
Add block_job_set_speed, which sets the maximum speed for a background block operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26arm: SoC model for Calxeda HighbankRob Herring
Adds support for Calxeda's Highbank SoC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-26arm_boot: support board IDs more than 16 bits widePeter Maydell
Support passing a board ID value to the kernel in r1 that is more than 16 bits wide. This is needed to pass the '-1 == invalid' value for boards which only support device tree booting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
2012-01-26arm: add secondary cpu boot callbacks to arm_boot.cMark Langsdorf
Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(), to allow platforms more control of how secondary CPUs are brought up. The new functions default to NULL and aren't called unless they are populated so there are no changes to existing platform models. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-26ahci: add support for non-PCI based controllersRob Herring
Add support for ahci on sysbus. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-26Add xgmac ethernet modelRob Herring
This adds very basic support for the xgmac ethernet core. Missing things include: - statistics counters - WoL support - rx checksum offload - chained descriptors (only linear descriptor ring) - broadcast and multicast handling Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-26block: rate-limit streaming operationsStefan Hajnoczi
This patch implements rate-limiting for image streaming. If we've exceeded the bandwidth quota for a 100 ms time slice we sleep the coroutine until the next slice begins. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: add image streaming block jobStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: add BlockJob interface for long-running operationsStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: make copy-on-read a per-request flagStefan Hajnoczi
Previously copy-on-read could only be enabled for all requests to a block device. This means requests coming from the guest as well as QEMU's internal requests would perform copy-on-read when enabled. For image streaming we want to support finer-grained behavior than just populating the image file from its backing image. Image streaming supports partial streaming where a common backing image is preserved. In this case guest requests should not perform copy-on-read because they would indiscriminately copy data which should be left in a backing image from the backing chain. Introduce a per-request flag for copy-on-read so that a block device can process both regular and copy-on-read requests. Overlapping reads and writes still need to be serialized for correctness when copy-on-read is happening, so add an in-flight reference count to track this. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: check bdrv_in_use() before blockdev operationsStefan Hajnoczi
Long-running block operations like block migration and image streaming must have continual access to their block device. It is not safe to perform operations like hotplug, eject, change, resize, commit, or external snapshot while a long-running operation is in progress. This patch adds the missing bdrv_in_use() checks so that block migration and image streaming never have the rug pulled out from underneath them. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26coroutine: add co_sleep_ns() coroutine sleep functionStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26block: replace unchecked strdup/malloc/calloc with glibStefan Hajnoczi
Most of the codebase as been converted to use glib memory allocation functions. There are still a few instances of malloc/calloc in the block layer and qemu-io. Replace them, especially since they do not check the strdup/malloc/calloc return value. Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26rbd: wire up snapshot removal and rollback functionalityGregory Farnum
Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-25vga: compile cirrus_vga in hwlibBlue Swirl
Remove target dependencies and compile Cirrus VGA in hwlib. Address masking can be removed since memory API handles that now. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-25memory: change dirty setting APIs to take a sizeBlue Swirl
Instead of each target knowing or guessing the guest page size, just pass the desired size of dirtied memory area. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-25memory: fix dirty mask function length handlingBlue Swirl
Fix handling of cases like start = 0xfff, length = 2. Change length to ram_addr_t to handle larger lengths. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-25vga: fix -nodefaults -device VGABlue Swirl
Flag -nodefaults should also imply no VGA. This was broken in a369da5f31ddbdeb32a7f76622e480d3995fbb00. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-23hyperv: fix build on non-KVM hostsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-23Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: kvm: Activate in-kernel irqchip support kvm: x86: Add user space part for in-kernel IOAPIC kvm: x86: Add user space part for in-kernel i8259 kvm: x86: Add user space part for in-kernel APIC kvm: x86: Establish IRQ0 override control kvm: Introduce core services for in-kernel irqchip support memory: Introduce memory_region_init_reservation ioapic: Factor out base class for KVM reuse ioapic: Drop post-load irr initialization i8259: Factor out base class for KVM reuse i8259: Completely privatize PicState apic: Open-code timer save/restore apic: Factor out base class for KVM reuse apic: Introduce apic_report_irq_delivered apic: Inject external NMI events via LINT1 apic: Stop timer on reset kvm: Move kvmclock into hw/kvm folder msi: Generalize msix_supported to msi_supported hyper-v: initialize Hyper-V CPUID leaves. hyper-v: introduce Hyper-V support infrastructure. Conflicts: Makefile.target Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-23Merge remote-tracking branch 'afaerber/prep-up' into stagingAnthony Liguori
* afaerber/prep-up: prep: Use i82378 PCI->ISA bridge for 'prep' machine prep: Add i82378 PCI-to-ISA bridge emulation prep: Add i82374 DMA emulation MAINTAINERS: Add PCI host bridge files to PReP machine prep: qdev'ify Raven host bridge (SysBus) prep_pci: Update I/O to MemoryRegion ops prep_pci: Simplify I/O endianness prep: qdev'ify Raven host bridge (PCIDevice) prep: Use ISA m48t59 prep: Fix offset of BIOS MemoryRegion
2012-01-23e1000: bounds packet size against buffer sizeAnthony Liguori
Otherwise we can write beyond the buffer and corrupt memory. This is tracked as CVE-2012-0029. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-22target-sparc: Fix mixup of uint64 and uint64_tAndreas Färber
Commit 793a137a41ad4125011c7022cf16a1baa40a5ab6 (target-sparc: Implement BMASK/BSHUFFLE.) introduced a stray usage of softfloat uint64 type. Use uint64_t instead. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 08:01:09 +0000