Age | Commit message (Collapse) | Author |
|
There is only a single caller of bdrv_make_zero(), which is qemu-img
convert. If the function fails, we just fall back to a different method
of zeroing out blocks on the target image. There is no good reason to
print error messages on stderr when the higher level operation will
actually succeed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
|
|
Test that mirror job actually resume on resume command after being
automatically paused on ENOSPC error.
It's a follow-up test for 8d9648cbf3e
"blockjob: fix user pause in block_job_error_action"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
'remotes/palmer/tags/riscv-for-master-4.0-rc1-v2' into staging
A second RISC-V Patch for 4.0.0-rc1
Sorry for sending two back-to-back pull requests. It looks like I
misunderstood Kito and there were actually two patches necessary to fix
the GCC test suite runs.
# gpg: Signature made Tue 26 Mar 2019 10:20:20 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-rc1-v2:
target/riscv: Fix wrong expanding for c.fswsp
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
base register is no rs1 not rs2 for fsw.
Signed-off-by: Kito Cheng <kito.cheng@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
into staging
Pflash and firmware configuration patches for 2019-03-26
# gpg: Signature made Tue 26 Mar 2019 07:21:13 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-pflash-2019-03-26:
pflash: Bury disabled code to limit device sizes
pflash: Require backend size to match device, improve errors
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
Miscellaneous patches for 2019-03-26
# gpg: Signature made Tue 26 Mar 2019 07:10:23 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2019-03-26:
qapi/qmp-dispatch: fix return value in do_qmp_dispatch
json: Fix off-by-one assert check in next_state()
xen-block: Replace qdict_put_obj() by qdict_put() where appropriate
util/error: Remove an unnecessary NULL check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
A Single RISC-V Patch for 4.0-rc1
If this is too late I'm OK with it being in rc2, but it fixes a concrete
regression and nobody has complained yet so I'd prefer it to be in rc1
if possible.
The fix is to zero-extend the inputs to DIVUW and REMUW, which was
exposed by the GCC test suite.
# gpg: Signature made Tue 26 Mar 2019 05:54:20 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-rc1:
target/riscv: Zero extend the inputs of divuw and remuw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We disabled code to limit device sizes to 8, 16, 32 or 64MiB more than
a decade ago in commit 95d1f3edd5e and c8b153d7949, v0.9.1. Bury.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Extracted from a larger patch, extended to pflash_cfi02.c]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190319163551.32499-3-armbru@redhat.com>
|
|
We reject undersized backends with a rather enigmatic "failed to read
the initial flash content" error. For instance:
$ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img
qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content
We happily accept oversized images, ignoring their tail. Throwing
away parts of firmware that way is pretty much certain to end in an
even more enigmatic failure to boot.
Require the backend's size to match the device's size exactly. Report
mismatch like this:
qemu-system-ppc64: Initialization of device cfi.pflash01 failed: device requires 1048576 bytes, block backend provides 512 bytes
Improve the error for actual read failures to "can't read block
backend".
To avoid duplicating even more code between the two pflash device
models, do all that in new helper blk_check_size_and_read_all().
The error reporting can still be confusing. For instance:
qemu-system-ppc64 -S -display none -M taihu -drive if=pflash,format=raw,file=eins.img -drive if=pflash,unit=1,format=raw,file=zwei.img
qemu-system-ppc64: Initialization of device cfi.pflash02 failed: device requires 2097152 bytes, block backend provides 512 bytes
Leaves the user guessing which of the two -drive is wrong. Mention
the issue in a TODO comment.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190319163551.32499-2-armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
There are no harm but just looks weird to return bool in
pointer-returning function. Introduced in 69240fe62d1 with the whole
failure-checking "if" chunk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190325154748.66381-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The assert checking if the value of lexer->state in next_state(),
which is used as an index to the 'json_lexer' array, incorrectly
checks for an index value less than or equal to ARRAY_SIZE(json_lexer).
Fix assert so that it just checks for an index less than the array size.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <1553169472-25325-1-git-send-email-liam.merwick@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Patch created mechanically by rerunning:
$ spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h \
--dir hw/block --in-place
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313174433.12966-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
This NULL check was required while introduced in 680d16dcb79f.
Later refactor added a NULL check in error_setv(), so this check
is now redundant.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190302223825.11192-2-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Report machine checks to the kernel.
It is now using these for probing missing devices.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
'remotes/juanquintela/tags/migration-pull-request' into staging
Pull request
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
# gpg: Signature made Mon 25 Mar 2019 17:46:29 GMT
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration-pull-request:
migration/postcopy: Update the bandwidth during postcopy
Migration/colo.c: Make user obtain the last COLO mode info after failover
Migration/colo.c: Add the necessary checks for colo_do_failover
Migration/colo.c: Add new COLOExitReason to handle all failover state
Migration/colo.c: Fix COLO failover status error
migration/rdma: Check qemu_rdma_init_one_block
migration: add support for a "tls-authz" migration parameter
multifd: Drop x-
multifd: Add some padding
multifd: Change default packet size
multifd: Be flexible about packet size
multifd: Drop x-multifd-page-count parameter
multifd: Create new next_packet_size field
multifd: Rename "size" member to pages_alloc
multifd: Only send pages when packet are not empty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The recently added max-postcopy-bandwidth parameter is only read
at the transition from precopy->postcopy where as the older
max-bandwidth parameter updates the migration bandwidth when changed
even if the migration is already running.
Fix this discrepency so that:
a) You can change the bandwidth during postcopy by setting
max-postcopy-bandwidth
b) Changing max-bandwidth during postcopy has no effect
(it currently changes the postcopy bandwidth which isn't
expected).
Fixes: 7e555c6c
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1686321
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add the last_colo_mode to save the status after failover.
This patch can solve the issue that user want to get last colo mode
use query_colo_status after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In this patch we add the processing state for COLOExitReason,
because we have to identify COLO in the failover processing state or
failover error state. In the way, we can handle all the failover state.
We have improved the description of the COLOExitReason by the way.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
When finished COLO failover, the status is FAILOVER_STATUS_COMPLETED.
The origin codes misunderstand the FAILOVER_STATUS_REQUIRE.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Actually it can't fail at the moment, but Coverity moans that
it's the only place it's not checked, and it's an easy check.
Reported-by: Coverity (CID 1399413)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The QEMU instance that runs as the server for the migration data
transport (ie the target QEMU) needs to be able to configure access
control so it can prevent unauthorized clients initiating an incoming
migration. This adds a new 'tls-authz' migration parameter that is used
to provide the QOM ID of a QAuthZ subclass instance that provides the
access control check. This is checked against the x509 certificate
obtained during the TLS handshake.
For example, when starting a QEMU for incoming migration, it is
possible to give an example identity of the source QEMU that is
intended to be connecting later:
$QEMU \
-monitor stdio \
-incoming defer \
...other args...
(qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
(qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB \
(qemu) migrate_incoming tcp:localhost:9000
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We make it supported from now on.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add some padding.
MultifdInit_t is padded to 64 bytes.
MultiFDPacket_t is padded to 320bytes (64 * 5).
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We moved from 64KB to 512KB, as it makes less locking contention
without any downside in testing.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
This way we can change the packet size in the future and everything
will work. We choose an arbitrary big number (100 times configured
size) as a limit about how big we will reallocate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Libvirt don't want to expose (and explain it). From now on we measure
the number of packages in bytes instead of pages, so it is the same
independently of architecture. We choose the page size of x86.
Notice that in the following patch we make this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We need to send this field when we add compression support. As we are
still on x- stage, we can do this kind of changes.
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
It really indicates what is the number of allocated pages for one
packet. Once there rename "used" to "pages_used".
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We send packages without pages sometimes for sysnchronizanion. The
iov functions do the right thing, but we will be changing this code in
future patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
into staging
Pull request
Compilation fixes and cleanups for QEMU 4.0.0.
# gpg: Signature made Mon 25 Mar 2019 15:58:28 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix attribution of trace points to source
trace-events: Delete unused trace points
scripts/cleanup-trace-events: Update for current practice
trace-events: Shorten file names in comments
trace-events: Consistently point to docs/devel/tracing.txt
trace: avoid SystemTap dtrace(1) warnings on empty files
trace: handle tracefs path truncation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/pmaydell/tags/pull-target-arm-20190325' into staging
target-arm queue:
* Fix non-parallel expansion of CASP
* nrf51_gpio: reflect pull-up/pull-down to IRQs
* Fix crash if guest tries to enable non-existent PMU counters
* Add PMUv2 to the Cortex-A15 and Cortex-A7
* Make pmccntr_op_start/finish static
# gpg: Signature made Mon 25 Mar 2019 14:19:47 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190325:
target/arm: make pmccntr_op_start/finish static
target/arm: cortex-a7 and cortex-a15 have pmus
target/arm: fix crash on pmu register access
target/arm: add PCI_TESTDEV back to default config
nrf51_gpio: reflect pull-up/pull-down to IRQs
target/arm: Fix non-parallel expansion of CASP
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These functions are not used outside helper.c
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
cortex-a7 and cortex-a15 have pmus (PMUv2) and they advertise
them in ID_DFR0. Let's allow them to function. This also enables
the pmu cpu property to work with these cpu types, i.e. we can
now do '-cpu cortex-a15,pmu=off' to remove the pmu.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix a QEMU NULL derefence that occurs when the guest attempts to
enable PMU counters with a non-v8 cpu model or a v8 cpu model
which has not configured a PMU.
Fixes: 4e7beb0cc0f3 ("target/arm: Add a timer to predict PMU counter overflow")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the kconfig shuffle arm lost pci-testdev which is used by
kvm-unit-tests. Let's add it back.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190322163059.9716-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c).
When the GPIO is set to input, the pull-up resistor brings the output
to 1, while when the GPIO is set to output, the output driver brings
the output to 0.
Implement this for the nRF51 GPIO device model. First, if both input and
output are floating, and there is a pull-up or pull-down resistor
configured, do not just set s->in, but also make any devices listening
on the output qemu_irq receive that value. Second, if the pin is
driven both internally (output pin) and externally you don't get a
short circuit if both sides drive the pin to the same value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190317141001.3346-1-pbonzini@redhat.com
[PMM: wrapped long line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The second word has been loaded from the unincremented
address since the first commit.
Fixes: 44ac14b06fa
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190322234302.12770-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1' into staging
Mix of testing & fpu fixes
- more splitting of Travis matric to avoid timeouts
- Fused Multiply-Add fixes for MIPS and hardfloat
- cleanups to docker travis emulation
# gpg: Signature made Mon 25 Mar 2019 10:44:44 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1:
docker: trivial changes to `make docker` help
docker: Fix travis script unable to find source dir
docker: Fix travis.py parser and misc change
hardfloat: fix float32/64 fused multiply-add
target/mips: Fix minor bug in FPU
.travis.yml: reduce number of targets built while disabling things
.travis.yml: --disable-user for --without-default-devices
.travis.yml: split some more system builds
configure: add --target-list-exclude
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Apply double quotes and period punctuation uniformly.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190321212528.6100-1-wainersm@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The script generated from QEMU_SRC/.travis.yml uses BUILD_DIR and
SRC_DIR path relative to the current dir, unless these variables
are exported in environment.
Since commit 05790dafef1 BUILD_DIR is exported in the runner script,
although SRC_DIR is not, so that make docker-travis fails becase
the reference to source dir is wrong. So let's unset both BUILD_DIR
and SRC_DIR before calling the script, given it is executed from
the source dir already (as in Travis).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190320221207.11366-3-wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Fixed the travis.py script that has failed to parse the current
QEMU_SRC/.travis.yml file. It no longer makes combinations from
env/matrix, instead it uses explicit includes. Also the compiler
can be omitted from matrix/include, so that Travis chooses the
first entry of the global compiler list.
Replaced yaml.load() with yaml.safe_load() so that quieting the
following deprecation warning:
https://github.com/yaml/pyyaml/wiki/PyYAML-yaml.load(input)-Deprecation
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190320221207.11366-2-wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Before falling back to softfloat FMA, we do not restore the original
values of inputs A and C. Fix it.
This bug was caught by running gcc's testsuite on RISC-V qemu.
Note that this change gives a small perf increase for fp-bench:
Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
Command: perf stat -r 3 taskset -c 0 ./fp-bench -o mulAdd -p $prec
- $prec = single:
- before:
101.71 MFlops
102.18 MFlops
100.96 MFlops
- after:
103.63 MFlops
103.05 MFlops
102.96 MFlops
- $prec = double:
- before:
173.10 MFlops
173.93 MFlops
172.11 MFlops
- after:
178.49 MFlops
178.88 MFlops
178.66 MFlops
Signed-off-by: Kito Cheng <kito.cheng@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190322204320.17777-1-cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Wrong type of NaN was generated for IEEE 754-2008 by MADDF.<D|S> and
MSUBF.<D|S> instructions when the arguments were (Inf, Zero, NaN) or
(Zero, Inf, NaN).
The if-else statement establishes if the system conforms to IEEE
754-1985 or IEEE 754-2008, and defines different behaviors depending
on that. In case of IEEE 754-2008, in mentioned cases of inputs,
<MADDF|MSUBF>.<D|S> returns the input value 'c' [2] (page 53) and
raises floating point exception 'Invalid Operation' [1] (pages 349,
350).
These scenarios were tested and the results in QEMU emulation match
the results obtained on the machine that has a MIPS64R6 CPU.
[1] MIPS Architecture for Programmers Volume II-a: The MIPS64
Instruction Set Reference Manual, Revision 6.06
[2] MIPS Architecture for Programmers Volume IV-j: The MIPS64
SIMD Architecture Module, Revision 1.12
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Message-Id: <1553008916-15274-2-git-send-email-mateja.marjanovic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[AJB: fixed up commit message]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
This build keeps timing out on Travis and it's unlikely including the
additional guest front-ends will catch any failures in the fallback
code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
|
|
This is essentially a softmmu tweak so don't bother building
linux-user builds as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
|
|
We define a new class of targets (MAIN_SOFTMMU_TARGETS) to cover the
major architectures. We either just build those or use the new
target-list-exclude mechanism to remove them from the list. This will
hopefully stop some of the longer builds hitting the Travis timeout
limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
|
|
This is an inverse selection which excludes a selected set of targets
from the default target list. It will mostly be useful for CI
configurations but it might be useful for some users as well.
You cannot specify --target-list and --target-list-exclude at the same
time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
|
|
staging
slirp: clarify license of slirp as BSD-3
# gpg: Signature made Fri 22 Mar 2019 19:16:50 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/slirp-pull-request:
slirp: is not maintained by Kelly Price for a long time
slirp: remove reference to COPYRIGHT file
slirp: clarify license of slirp files using SPDX: implicit via unstated
slirp: clarify license of slirp files using SPDX: implicit via COPYRIGHT
slirp: clarify license of slirp files using SPDX: explicit MIT
slirp: clarify license of slirp files using SPDX: explicit BSD
slirp: relicense GPL files to BSD-3
slirp: update COPYRIGHT to use full 3-Clause BSD License
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Drop test_fail: we know that exit simcall works. Now that it's not run
automatically there's no point in keeping it.
Drop test_pipeline: we're not modeling pipeline, we don't control ccount
and there's no plan to do so.
Enable test_boolean: it won't break on cores without boolean option, it
will do testing on cores with boolean option.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|