aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-26target-mips: add microMIPS TLBINV, TLBINVFYongbok Kim
Add microMIPS TLBINV, TLBINVF Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-26target-mips: fix {RD, WR}PGPR in microMIPSYongbok Kim
rt, rs were swapped Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-26target-mips: convert host to MIPS errno values when requiredLeon Alrae
Convert only errno values which can be returned by system calls in mips-semi.c and are not generic to all archs. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-26target-mips: add Unified Hosting Interface (UHI) supportLeon Alrae
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option will alter the behaviour of SDBBP 1 instruction -- UHI operation will be called instead of generating a debug exception. Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set to -1 if semihosting arguments are passed to indicate that the UHI operations should be used to obtain input arguments. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-26target-mips: remove identical code in different branchLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-26hw/mips: Do not clear BEV for MIPS malta kernel loadMatthew Fortune
The BEV flag controls whether the boot exception vector is still in place when starting a kernel. When cleared the exception vector at EBASE (or hard coded address of 0x80000000) is used instead. The early stages of the linux kernel would benefit from BEV still being set to ensure any faults get handled by the boot rom exception handlers. This is a moot point for system qemu as there aren't really any BEV handlers, but there are other good reasons to change this... The UHI (semi-hosting interface) defines special behaviours depending on whether an application starts in an environment with BEV set or cleared. When BEV is set then UHI assumes that a bootloader is relatively dumb and has no advanced exception handling logic. However, when BEV is cleared then UHI assumes that the bootloader has the ability to handle UHI exceptions with its exception handlers and will unwind and forward UHI SYSCALL exceptions to the exception vector that was installed prior to running the application. Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-26include/softmmu-semi.h: Make semihosting support 64-bit cleanMaciej W. Rozycki
Correct addresses passed around in semihosting to use a data type suitable for both 32-bit and 64-bit targets. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-25Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed Jun 24 16:37:23 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: net: simplify net_client_init1() net: drop if expression that is always true net: raise an error if -net type is invalid net: replace net_client_init1() netdev whitelist with blacklist net: add missing "netmap" to host_net_devices[] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed Jun 24 16:27:53 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: virito-blk: drop duplicate check qemu-iotests: fix 051.out after qdev error message change iov: don't touch iov in iov_send_recv() raw-posix: Introduce hdev_is_sg() raw-posix: Use DPRINTF for DEBUG_FLOPPY raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT Fix migration in case of scsi-generic block: Use bdrv_is_sg() everywhere nvme: Fix memleak in nvme_dma_read_prp vvfat: add a label option util/hbitmap: Add an API to reset all set bits in hbitmap virtio-blk: Use blk_drain() to drain IO requests block-backend: Introduce blk_drain() throttle: Check current timers before updating any_timer_armed[] block: Let bdrv_drain_all() to call aio_poll() for each AioContext Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-24net: simplify net_client_init1()Stefan Hajnoczi
Drop the union and move the hubport creation into the !is_netdev case. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
2015-06-24net: drop if expression that is always trueStefan Hajnoczi
Both is_netdev and !is_netdev paths already check that net_client_init_func[opts->kind] is non-NULL so there is no need for the if statement. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
2015-06-24net: raise an error if -net type is invalidStefan Hajnoczi
When a -net type is used that was not compiled into the binary there should be an error message. Note the special case for -net none, which is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
2015-06-24net: replace net_client_init1() netdev whitelist with blacklistStefan Hajnoczi
It's cumbersome to keep the whitelist up-to-date. New netdev backends should most likely be allowed so a blacklist makes more sense than a whitelist. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24net: add missing "netmap" to host_net_devices[]Stefan Hajnoczi
Although hmp-commands.hx lists "netmap" as a valid host_net_add type, the command rejects it because it's missing from the list. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-24virito-blk: drop duplicate checkGonglei
in_num = req->elem.in_num, and req->elem.in_num is checked in line 489, so the check about in_num variable is superflous, let's drop it. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1435138164-11728-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-24qemu-iotests: fix 051.out after qdev error message changeStefan Hajnoczi
Commit f006cf7fa9a63ba8e4ccf57d46231ce594301727 ("qdev-monitor: Propagate errors through qdev_device_add()") dropped a meaningless error message. This change in output caused qemu-iotests 051 to fail: QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. -QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized Update 051.out so the test passes again. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1435071369-30936-1-git-send-email-stefanha@redhat.com
2015-06-23Merge remote-tracking branch ↵Peter Maydell
'remotes/mjt/tags/pull-trivial-patches-2015-06-23' into staging trivial patches for 2015-06-23 # gpg: Signature made Tue Jun 23 18:23:45 2015 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-06-23: (21 commits) util/qemu-sockets: improve ai_flag hints for ipv6 hosts hw/display/tcx.c: Fix memory leak hw/display/cg3.c: Fix memory leak Makefile: Add "make ctags" Makefile: Fix "make cscope TAGS" qemu-options: Use @itemx where appropriate qemu-options: Improve -global documentation throttle: Fix typo in the documentation of block_set_io_throttle hw/display/qxl-logger.c: Constify some variable configure: rearrange --help and consolidate enable/disable together libcacard: pkgconfig: tidy dependent libs vt82c686: QOMify xen_pt: QOMify wdt_i6300esb: QOMify piix4: QOMify piix: piix3 QOMify pci-assign: QOMify Print error when failing to load PCI config data Grammar: 'as to'->'as for' remove libdecnumber/dpd/decimal128Local.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23util/qemu-sockets: improve ai_flag hints for ipv6 hostsWolfgang Bumiller
*) Do not use AI_ADDRCONFIG on listening sockets, because this flag makes it impossible to explicitly listen on '127.0.0.1' if no global ipv4 address is configured additionally, making this a very uncomfortable option. *) Add AI_V4MAPPED hint for connecting sockets. If your system is globally only connected via ipv6 you often still want to be able to use '127.0.0.1' and 'localhost' (even if localhost doesn't also have an ipv6 entry). For example, PVE - unless explicitly asking for insecure mode - uses ipv4 loopback addresses with QEMU for live migrations tunneled over SSH. These fail to start because AI_ADDRCONFIG makes getaddrinfo refuse to work with '127.0.0.1'. As for the AI_V4MAPPED flag: glibc uses it by default, and providing non-0 flags removes it. I think it makes sense to use it. I also want to point out that glibc explicitly sidesteps POSIX standards when passing 0 as hints by then assuming both AI_V4MAPPED and AI_ADDRCONFIG (the latter being a rather weird choice IMO), while according to POSIX.1-2001 it should be assumed 0. (glibc considers its choice an improvement.) Since either AI_CANONNAME or AI_PASSIVE are passed in our cases, glibc's default flags in turn are disabled again unless explicitly added, which I do with this patch. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23hw/display/tcx.c: Fix memory leakShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23hw/display/cg3.c: Fix memory leakShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23Makefile: Add "make ctags"Fam Zheng
This generates ctags file Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23Makefile: Fix "make cscope TAGS"Fam Zheng
Cscope and TAGS files work in source directory rather than the build directory, also, don't ask users to run configure first, because they may have an out of tree build. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23qemu-options: Use @itemx where appropriateMarkus Armbruster
Doesn't appear to make a difference, but let's use it consistently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23qemu-options: Improve -global documentationMarkus Armbruster
Recent commit 3751d7c "vl: allow full-blown QemuOpts syntax for -global" overloaded its existing argument syntax DRIVER.PROP=VALUE with QemuOpts syntax. Unambigious as long as no DRIVER contains '='. Its documentation claims that "the two syntaxes are equivalent." Improve it to spell out how exactly the old syntax gets desugared into the new one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23throttle: Fix typo in the documentation of block_set_io_throttleAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23hw/display/qxl-logger.c: Constify some variableFrediano Ziglio
Signed-off-by: Frediano Ziglio <fziglio@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23configure: rearrange --help and consolidate enable/disable togetherMichael Tokarev
This is an attempt to rearrange configure --help output a bit and consolidate pairs of --enable/disable into its own section. After this, help text is easier to sort, manage and read. More descriptive text can be added as well, since we now have more space. While at it, mention en/dis-able-vte. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23libcacard: pkgconfig: tidy dependent libsMichael Tokarev
libcacard.pc file lists only one package in Requires field, which is nss, while glib-2.0 is also a requiriment. Furthermore, for libraries used internally by the library (this is the way nss and glib are used by libcacard), Requires.private shold be used instead of Requires. Fix both issues. This does not affect linking of qemu because it links with objects from libcacard directly. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23vt82c686: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23xen_pt: QOMifyGonglei
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23wdt_i6300esb: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23piix4: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23piix: piix3 QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23pci-assign: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23Print error when failing to load PCI config dataDr. David Alan Gilbert
When loading migration fails due to a disagreement about PCI config data we don't currently get any errors explaining that was the cause of the problem or which byte in the config data was at fault. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23Grammar: 'as to'->'as for'Dr. David Alan Gilbert
Fixup migrate-incoming text as requested by Eric in: http://lists.nongnu.org/archive/html/qemu-devel/2015-03/msg03362.html Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23remove libdecnumber/dpd/decimal128Local.hMichael Tokarev
Commit 72ac97cdfc added two equivalent versions of decimal128Local.h, one in libdecnumber/dpd/ and another in include/libdecnumber/dpd/. Being identical by the code, the two files however differs in the licensing terms. The one in libdecnumber/dpd/ (which is being removed by this patch) is licensed as GPL3.1 (plus gcc runtime exception), which, as far as I know, is not compatible with GPL-2. This file is not used (it is included from include/libdecnumber/dpd/decimal128.h, so version in include/ is used). More, the version in include/ can also be removed, since none of the 3 defines from that file are actually used by the code. Even more, one of the defines from there, decimal128SetSign, is redefined (to equivalent value) in libdecnumber/dpd/decimal128.c, but again, never used. What a mess... Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23configure: append --extra-ldflags to LDFLAGSAlex Bennée
The help text says --extra-ldflags is appended to LDFLAGS so make it so. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23Merge remote-tracking branch 'remotes/sstabellini/tags/xen-220615-3' into ↵Peter Maydell
staging xen-220615, more SOB lines # gpg: Signature made Tue Jun 23 17:19:08 2015 BST using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-220615-3: Revert "xen-hvm: increase maxmem before calling xc_domain_populate_physmap" xen/pass-through: constify some static data xen/pass-through: log errno values rather than function return ones xen/pass-through: ROM BAR handling adjustments xen/pass-through: fold host PCI command register writes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23Revert "xen-hvm: increase maxmem before calling xc_domain_populate_physmap"Stefano Stabellini
This reverts commit c1d322e6048796296555dd36fdd102d7fa2f50bf. The original commit fixes a bug when assigning a large number of devices which require option roms to a guest. (One known configuration that needs extra memory is having more than 4 emulated NICs assigned. Three or fewer NICs seems to work without this functionality.) However, by unilaterally increasing maxmem, it introduces two problems. First, now libxl's calculation of the required maxmem during migration is broken -- any guest which exercised this functionality will fail on migration. (Guests which have the default number of devices are not affected.) Secondly, it makes it impossible for a higher-level toolstack or administer to predict how much memory a VM will actually use, making it much more difficult to effectively use all of the memory on a machine. Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-23xen/pass-through: constify some static dataJan Beulich
This is done indirectly by adjusting two typedefs and helps emphasizing that the respective tables aren't supposed to be modified at runtime (as they may be shared between devices). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-23xen/pass-through: log errno values rather than function return onesJan Beulich
Functions setting errno commonly return just -1, which is of no particular use in the log file. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-23xen/pass-through: ROM BAR handling adjustmentsJan Beulich
Expecting the ROM BAR to be written with an all ones value when sizing the region is wrong - the low bit has another meaning (enable/disable) and bits 1..10 are reserved. The PCI spec also mandates writing all ones to just the address portion of the register. Use suitable constants also for initializing the ROM BAR register field description. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com>
2015-06-23xen/pass-through: fold host PCI command register writesJan Beulich
The code introduced to address XSA-126 allows simplification of other code in xen_pt_initfn(): All we need to do is update "cmd" suitably, as it'll be written back to the host register near the end of the function anyway. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com>
2015-06-23iov: don't touch iov in iov_send_recv()Wen Congyang
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Message-id: 555D39D2.4000705@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23raw-posix: Introduce hdev_is_sg()Dimitris Aragiorgis
Until now, an SG device was identified only by checking if its path started with "/dev/sg". Then, hdev_open() would set the bs->sg flag accordingly. The patch relies on the actual properties of the device instead of the specified file path. To this end, test for an SG device (e.g. /dev/sg0) by ensuring that all of the following holds: - The specified file name corresponds to a character device - The device supports the SG_GET_VERSION_NUM ioctl - The device supports the SG_GET_SCSI_ID ioctl Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Message-id: 1435056300-14924-6-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23raw-posix: Use DPRINTF for DEBUG_FLOPPYDimitris Aragiorgis
Get rid of several #ifdef DEBUG_FLOPPY and substitute them with DPRINTF. Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435056300-14924-5-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINTDimitris Aragiorgis
Building the QEMU tools fails if we #define DEBUG_BLOCK inside block/raw-posix.c. Here instead of adding qemu-log.o in block-obj-y so that DEBUG_BLOCK_PRINT can be used, we substitute the latter with a simple DPRINTF() (that does not cause bit-rot). Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435056300-14924-4-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23Fix migration in case of scsi-genericDimitris Aragiorgis
During migration, QEMU uses fsync()/fdatasync() on the open file descriptor for read-write block devices to flush data just before stopping the VM. However, fsync() on a scsi-generic device returns -EINVAL which causes the migration to fail. This patch skips flushing data in case of an SG device, since submitting SCSI commands directly via an SG character device (e.g. /dev/sg0) bypasses the page cache completely, anyway. Note that fsync() not only flushes the page cache but also the disk cache. The scsi-generic device never sends flushes, and for migration it assumes that the same SCSI device is used by the destination host, so it does not issue any SCSI SYNCHRONIZE CACHE (10) command. Finally, remove the bdrv_is_sg() test from iscsi_co_flush() since this is now redundant (we flush the underlying protocol at the end of bdrv_co_flush() which, with this patch, we never reach). Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435056300-14924-3-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23block: Use bdrv_is_sg() everywhereDimitris Aragiorgis
Instead of checking bs->sg use bdrv_is_sg() consistently throughout the code. Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435056300-14924-2-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 02:54:33 +0000