aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-26pflash: Bury disabled code to limit device sizesAlex Bennée
We disabled code to limit device sizes to 8, 16, 32 or 64MiB more than a decade ago in commit 95d1f3edd5e and c8b153d7949, v0.9.1. Bury. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> [Extracted from a larger patch, extended to pflash_cfi02.c] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190319163551.32499-3-armbru@redhat.com>
2019-03-26pflash: Require backend size to match device, improve errorsMarkus Armbruster
We reject undersized backends with a rather enigmatic "failed to read the initial flash content" error. For instance: $ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content We happily accept oversized images, ignoring their tail. Throwing away parts of firmware that way is pretty much certain to end in an even more enigmatic failure to boot. Require the backend's size to match the device's size exactly. Report mismatch like this: qemu-system-ppc64: Initialization of device cfi.pflash01 failed: device requires 1048576 bytes, block backend provides 512 bytes Improve the error for actual read failures to "can't read block backend". To avoid duplicating even more code between the two pflash device models, do all that in new helper blk_check_size_and_read_all(). The error reporting can still be confusing. For instance: qemu-system-ppc64 -S -display none -M taihu -drive if=pflash,format=raw,file=eins.img -drive if=pflash,unit=1,format=raw,file=zwei.img qemu-system-ppc64: Initialization of device cfi.pflash02 failed: device requires 2097152 bytes, block backend provides 512 bytes Leaves the user guessing which of the two -drive is wrong. Mention the issue in a TODO comment. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190319163551.32499-2-armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-26qapi/qmp-dispatch: fix return value in do_qmp_dispatchVladimir Sementsov-Ogievskiy
There are no harm but just looks weird to return bool in pointer-returning function. Introduced in 69240fe62d1 with the whole failure-checking "if" chunk. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190325154748.66381-1-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-26json: Fix off-by-one assert check in next_state()Liam Merwick
The assert checking if the value of lexer->state in next_state(), which is used as an index to the 'json_lexer' array, incorrectly checks for an index value less than or equal to ARRAY_SIZE(json_lexer). Fix assert so that it just checks for an index less than the array size. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <1553169472-25325-1-git-send-email-liam.merwick@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-26xen-block: Replace qdict_put_obj() by qdict_put() where appropriateMarkus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir hw/block --in-place Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190313174433.12966-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2019-03-26util/error: Remove an unnecessary NULL checkPhilippe Mathieu-Daudé
This NULL check was required while introduced in 680d16dcb79f. Later refactor added a NULL check in error_setv(), so this check is now redundant. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190302223825.11192-2-philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-25pc-bios: Update palcode-clipperRichard Henderson
Report machine checks to the kernel. It is now using these for probing missing devices. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-25Merge remote-tracking branch ↵Peter Maydell
'remotes/juanquintela/tags/migration-pull-request' into staging Pull request - Rebase last pull request - Drop multifd - several other minor fixesLaLaLa # gpg: Signature made Mon 25 Mar 2019 17:46:29 GMT # gpg: using RSA key F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration-pull-request: migration/postcopy: Update the bandwidth during postcopy Migration/colo.c: Make user obtain the last COLO mode info after failover Migration/colo.c: Add the necessary checks for colo_do_failover Migration/colo.c: Add new COLOExitReason to handle all failover state Migration/colo.c: Fix COLO failover status error migration/rdma: Check qemu_rdma_init_one_block migration: add support for a "tls-authz" migration parameter multifd: Drop x- multifd: Add some padding multifd: Change default packet size multifd: Be flexible about packet size multifd: Drop x-multifd-page-count parameter multifd: Create new next_packet_size field multifd: Rename "size" member to pages_alloc multifd: Only send pages when packet are not empty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25migration/postcopy: Update the bandwidth during postcopyDr. David Alan Gilbert
The recently added max-postcopy-bandwidth parameter is only read at the transition from precopy->postcopy where as the older max-bandwidth parameter updates the migration bandwidth when changed even if the migration is already running. Fix this discrepency so that: a) You can change the bandwidth during postcopy by setting max-postcopy-bandwidth b) Changing max-bandwidth during postcopy has no effect (it currently changes the postcopy bandwidth which isn't expected). Fixes: 7e555c6c bz: https://bugzilla.redhat.com/show_bug.cgi?id=1686321 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Make user obtain the last COLO mode info after failoverZhang Chen
Add the last_colo_mode to save the status after failover. This patch can solve the issue that user want to get last colo mode use query_colo_status after failover. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Add the necessary checks for colo_do_failoverZhang Chen
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Add new COLOExitReason to handle all failover stateZhang Chen
In this patch we add the processing state for COLOExitReason, because we have to identify COLO in the failover processing state or failover error state. In the way, we can handle all the failover state. We have improved the description of the COLOExitReason by the way. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Fix COLO failover status errorZhang Chen
When finished COLO failover, the status is FAILOVER_STATUS_COMPLETED. The origin codes misunderstand the FAILOVER_STATUS_REQUIRE. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25migration/rdma: Check qemu_rdma_init_one_blockDr. David Alan Gilbert
Actually it can't fail at the moment, but Coverity moans that it's the only place it's not checked, and it's an easy check. Reported-by: Coverity (CID 1399413) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25migration: add support for a "tls-authz" migration parameterDaniel P. Berrange
The QEMU instance that runs as the server for the migration data transport (ie the target QEMU) needs to be able to configure access control so it can prevent unauthorized clients initiating an incoming migration. This adds a new 'tls-authz' migration parameter that is used to provide the QOM ID of a QAuthZ subclass instance that provides the access control check. This is checked against the x509 certificate obtained during the TLS handshake. For example, when starting a QEMU for incoming migration, it is possible to give an example identity of the source QEMU that is intended to be connecting later: $QEMU \ -monitor stdio \ -incoming defer \ ...other args... (qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ (qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB \ (qemu) migrate_incoming tcp:localhost:9000 Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-Juan Quintela
We make it supported from now on. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Add some paddingJuan Quintela
Add some padding. MultifdInit_t is padded to 64 bytes. MultiFDPacket_t is padded to 320bytes (64 * 5). Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Change default packet sizeJuan Quintela
We moved from 64KB to 512KB, as it makes less locking contention without any downside in testing. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Be flexible about packet sizeJuan Quintela
This way we can change the packet size in the future and everything will work. We choose an arbitrary big number (100 times configured size) as a limit about how big we will reallocate. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-multifd-page-count parameterJuan Quintela
Libvirt don't want to expose (and explain it). From now on we measure the number of packages in bytes instead of pages, so it is the same independently of architecture. We choose the page size of x86. Notice that in the following patch we make this variable. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Create new next_packet_size fieldJuan Quintela
We need to send this field when we add compression support. As we are still on x- stage, we can do this kind of changes. Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Rename "size" member to pages_allocJuan Quintela
It really indicates what is the number of allocated pages for one packet. Once there rename "used" to "pages_used". Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Only send pages when packet are not emptyJuan Quintela
We send packages without pages sometimes for sysnchronizanion. The iov functions do the right thing, but we will be changing this code in future patches. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging Pull request Compilation fixes and cleanups for QEMU 4.0.0. # gpg: Signature made Mon 25 Mar 2019 15:58:28 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace-events: Fix attribution of trace points to source trace-events: Delete unused trace points scripts/cleanup-trace-events: Update for current practice trace-events: Shorten file names in comments trace-events: Consistently point to docs/devel/tracing.txt trace: avoid SystemTap dtrace(1) warnings on empty files trace: handle tracefs path truncation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190325' into staging target-arm queue: * Fix non-parallel expansion of CASP * nrf51_gpio: reflect pull-up/pull-down to IRQs * Fix crash if guest tries to enable non-existent PMU counters * Add PMUv2 to the Cortex-A15 and Cortex-A7 * Make pmccntr_op_start/finish static # gpg: Signature made Mon 25 Mar 2019 14:19:47 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190325: target/arm: make pmccntr_op_start/finish static target/arm: cortex-a7 and cortex-a15 have pmus target/arm: fix crash on pmu register access target/arm: add PCI_TESTDEV back to default config nrf51_gpio: reflect pull-up/pull-down to IRQs target/arm: Fix non-parallel expansion of CASP Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25target/arm: make pmccntr_op_start/finish staticAndrew Jones
These functions are not used outside helper.c Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190322162333.17159-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25target/arm: cortex-a7 and cortex-a15 have pmusAndrew Jones
cortex-a7 and cortex-a15 have pmus (PMUv2) and they advertise them in ID_DFR0. Let's allow them to function. This also enables the pmu cpu property to work with these cpu types, i.e. we can now do '-cpu cortex-a15,pmu=off' to remove the pmu. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190322162333.17159-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25target/arm: fix crash on pmu register accessAndrew Jones
Fix a QEMU NULL derefence that occurs when the guest attempts to enable PMU counters with a non-v8 cpu model or a v8 cpu model which has not configured a PMU. Fixes: 4e7beb0cc0f3 ("target/arm: Add a timer to predict PMU counter overflow") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190322162333.17159-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25target/arm: add PCI_TESTDEV back to default configAndrew Jones
In the kconfig shuffle arm lost pci-testdev which is used by kvm-unit-tests. Let's add it back. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20190322163059.9716-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25nrf51_gpio: reflect pull-up/pull-down to IRQsPaolo Bonzini
Some drivers do I2C bitbanging by keeping the output to 0 and flipping the GPIO direction between input and output (see for example in Linux gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c). When the GPIO is set to input, the pull-up resistor brings the output to 1, while when the GPIO is set to output, the output driver brings the output to 0. Implement this for the nRF51 GPIO device model. First, if both input and output are floating, and there is a pull-up or pull-down resistor configured, do not just set s->in, but also make any devices listening on the output qemu_irq receive that value. Second, if the pin is driven both internally (output pin) and externally you don't get a short circuit if both sides drive the pin to the same value. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190317141001.3346-1-pbonzini@redhat.com [PMM: wrapped long line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25target/arm: Fix non-parallel expansion of CASPRichard Henderson
The second word has been loaded from the unincremented address since the first commit. Fixes: 44ac14b06fa Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190322234302.12770-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1' into staging Mix of testing & fpu fixes - more splitting of Travis matric to avoid timeouts - Fused Multiply-Add fixes for MIPS and hardfloat - cleanups to docker travis emulation # gpg: Signature made Mon 25 Mar 2019 10:44:44 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1: docker: trivial changes to `make docker` help docker: Fix travis script unable to find source dir docker: Fix travis.py parser and misc change hardfloat: fix float32/64 fused multiply-add target/mips: Fix minor bug in FPU .travis.yml: reduce number of targets built while disabling things .travis.yml: --disable-user for --without-default-devices .travis.yml: split some more system builds configure: add --target-list-exclude Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-25docker: trivial changes to `make docker` helpWainer dos Santos Moschetta
Apply double quotes and period punctuation uniformly. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190321212528.6100-1-wainersm@redhat.com> Reviewed-by: Fam Zheng <fam@euphon.net> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-25docker: Fix travis script unable to find source dirWainer dos Santos Moschetta
The script generated from QEMU_SRC/.travis.yml uses BUILD_DIR and SRC_DIR path relative to the current dir, unless these variables are exported in environment. Since commit 05790dafef1 BUILD_DIR is exported in the runner script, although SRC_DIR is not, so that make docker-travis fails becase the reference to source dir is wrong. So let's unset both BUILD_DIR and SRC_DIR before calling the script, given it is executed from the source dir already (as in Travis). Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190320221207.11366-3-wainersm@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-25docker: Fix travis.py parser and misc changeWainer dos Santos Moschetta
Fixed the travis.py script that has failed to parse the current QEMU_SRC/.travis.yml file. It no longer makes combinations from env/matrix, instead it uses explicit includes. Also the compiler can be omitted from matrix/include, so that Travis chooses the first entry of the global compiler list. Replaced yaml.load() with yaml.safe_load() so that quieting the following deprecation warning: https://github.com/yaml/pyyaml/wiki/PyYAML-yaml.load(input)-Deprecation Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190320221207.11366-2-wainersm@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-25hardfloat: fix float32/64 fused multiply-addKito Cheng
Before falling back to softfloat FMA, we do not restore the original values of inputs A and C. Fix it. This bug was caught by running gcc's testsuite on RISC-V qemu. Note that this change gives a small perf increase for fp-bench: Host: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz Command: perf stat -r 3 taskset -c 0 ./fp-bench -o mulAdd -p $prec - $prec = single: - before: 101.71 MFlops 102.18 MFlops 100.96 MFlops - after: 103.63 MFlops 103.05 MFlops 102.96 MFlops - $prec = double: - before: 173.10 MFlops 173.93 MFlops 172.11 MFlops - after: 178.49 MFlops 178.88 MFlops 178.66 MFlops Signed-off-by: Kito Cheng <kito.cheng@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20190322204320.17777-1-cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-25target/mips: Fix minor bug in FPUMateja Marjanovic
Wrong type of NaN was generated for IEEE 754-2008 by MADDF.<D|S> and MSUBF.<D|S> instructions when the arguments were (Inf, Zero, NaN) or (Zero, Inf, NaN). The if-else statement establishes if the system conforms to IEEE 754-1985 or IEEE 754-2008, and defines different behaviors depending on that. In case of IEEE 754-2008, in mentioned cases of inputs, <MADDF|MSUBF>.<D|S> returns the input value 'c' [2] (page 53) and raises floating point exception 'Invalid Operation' [1] (pages 349, 350). These scenarios were tested and the results in QEMU emulation match the results obtained on the machine that has a MIPS64R6 CPU. [1] MIPS Architecture for Programmers Volume II-a: The MIPS64 Instruction Set Reference Manual, Revision 6.06 [2] MIPS Architecture for Programmers Volume IV-j: The MIPS64 SIMD Architecture Module, Revision 1.12 Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Message-Id: <1553008916-15274-2-git-send-email-mateja.marjanovic@rt-rk.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [AJB: fixed up commit message] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-25.travis.yml: reduce number of targets built while disabling thingsAlex Bennée
This build keeps timing out on Travis and it's unlikely including the additional guest front-ends will catch any failures in the fallback code. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
2019-03-25.travis.yml: --disable-user for --without-default-devicesAlex Bennée
This is essentially a softmmu tweak so don't bother building linux-user builds as well. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
2019-03-25.travis.yml: split some more system buildsAlex Bennée
We define a new class of targets (MAIN_SOFTMMU_TARGETS) to cover the major architectures. We either just build those or use the new target-list-exclude mechanism to remove them from the list. This will hopefully stop some of the longer builds hitting the Travis timeout limit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
2019-03-25configure: add --target-list-excludeAlex Bennée
This is an inverse selection which excludes a selected set of targets from the default target list. It will mostly be useful for CI configurations but it might be useful for some users as well. You cannot specify --target-list and --target-list-exclude at the same time. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
2019-03-25Merge remote-tracking branch 'remotes/elmarco/tags/slirp-pull-request' into ↵Peter Maydell
staging slirp: clarify license of slirp as BSD-3 # gpg: Signature made Fri 22 Mar 2019 19:16:50 GMT # gpg: using RSA key DAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/slirp-pull-request: slirp: is not maintained by Kelly Price for a long time slirp: remove reference to COPYRIGHT file slirp: clarify license of slirp files using SPDX: implicit via unstated slirp: clarify license of slirp files using SPDX: implicit via COPYRIGHT slirp: clarify license of slirp files using SPDX: explicit MIT slirp: clarify license of slirp files using SPDX: explicit BSD slirp: relicense GPL files to BSD-3 slirp: update COPYRIGHT to use full 3-Clause BSD License Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-23tests/tcg/xtensa: clean up test setMax Filippov
Drop test_fail: we know that exit simcall works. Now that it's not run automatically there's no point in keeping it. Drop test_pipeline: we're not modeling pipeline, we don't control ccount and there's no plan to do so. Enable test_boolean: it won't break on cores without boolean option, it will do testing on cores with boolean option. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-03-23target/xtensa: don't announce exit simcallMax Filippov
Don't announce that exit simcall has been invoked: this is just noise. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-03-22slirp: is not maintained by Kelly Price for a long timeMarc-André Lureau
slirp has been maintained by the QEMU maintainers and will be maintained under an independent project soon. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kelly Price <strredwolf@gmail.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-03-22slirp: remove reference to COPYRIGHT fileMarc-André Lureau
The slirp COPYRIGHT file is a BSD-3 license. Instead of referring to another project file, the SPDX license notice present in all source files states that unequivocally. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-03-22slirp: clarify license of slirp files using SPDX: implicit via unstatedMarc-André Lureau
Add SPDX license identifier to clarify the license of files without explicit license header. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-03-22slirp: clarify license of slirp files using SPDX: implicit via COPYRIGHTMarc-André Lureau
Add SPDX license identifier to clarify the license of files with reference to BSD license from slirp COPYRIGHT file. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-03-22slirp: clarify license of slirp files using SPDX: explicit MITMarc-André Lureau
Add SPDX license identifier to clarify the license of files with explicit MIT license header. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-03-22slirp: clarify license of slirp files using SPDX: explicit BSDMarc-André Lureau
Add SPDX license identifier to clarify the license of files with explicit 3-clause BSD license header. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 02:07:13 +0000