aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-07The _exit syscall is used for both thread termination in NPTL applications,pbrook
and process termination in legacy applications. Try to guess which we want based on the presence of multiple threads. Also implement locking when modifying the CPU list. Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Fix BSD userblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6734 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Fix sparc64-softmmu breakage from r6711blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6733 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07pc-bios/Makefile: add a rule to produce dtb filesaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6732 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Add more missing filesaliguori
Major FAIL with my checkin scripts. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6731 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Add missing file from previous commitaliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6730 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Fix race condition on access to env->interrupt_requestaurel32
env->interrupt_request is accessed as the bit level from both main code and signal handler, making a race condition possible even on CISC CPU. This causes freeze of QEMU under high load when running the dyntick clock. The patch below move the bit corresponding to CPU_INTERRUPT_EXIT in a separate variable, declared as volatile sig_atomic_t, so it should be work even on RISC CPU. We may want to move the cpu_interrupt(env, CPU_INTERRUPT_EXIT) case in its own function and get rid of CPU_INTERRUPT_EXIT. That can be done later, I wanted to keep the patch short for easier review. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6728 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Remove tabs introduced from VNC ACL seriesaliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6727 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Support ACLs for controlling VNC access ("Daniel P. Berrange")aliguori
This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Include auth credentials in 'info vnc' ("Daniel P. Berrange")aliguori
This patch extends the 'info vnc' monitor output to include information about the VNC client authentication credentials. For clients authenticated using SASL, this will output the username. For clients authenticated using x509 certificates, this will output the x509 distinguished name. Auth can be stacked, so both username & x509 dname may be shown. Server: address: 0.0.0.0:5902 auth: vencrypt+x509+sasl Client: address: 10.33.6.67:38621 x509 dname: C=GB,O=ACME,L=London,ST=London,CN=localhost username: admin Client: address: 10.33.6.63:38620 x509 dname: C=GB,O=ACME,L=London,ST=London,CN=localhost username: admin vnc-tls.c | 17 +++++++++++++++++ vnc-tls.h | 3 +++ vnc.c | 19 +++++++++++++++++-- 3 files changed, 37 insertions(+), 2 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6725 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Add SASL authentication support ("Daniel P. Berrange")aliguori
This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Move TLS auth into separate file ("Daniel P. Berrange")aliguori
This patch refactors the existing TLS code to make the main VNC code more managable. The code moves to two new files - vnc-tls.c: generic helpers for TLS handshake & credential setup - vnc-auth-vencrypt.c: the actual VNC TLS authentication mechanism. The reason for this split is that there are other TLS based auth mechanisms which we may like to use in the future. These can all share the same vnc-tls.c routines. In addition this will facilitate anyone who may want to port the vnc-tls.c file to allow for choice of GNUTLS & NSS for impl. The TLS state is moved out of the VncState struct, and into a separate VncStateTLS struct, defined in vnc-tls.h. This is then referenced from the main VncState. End size of the struct is the same, but it keeps things a little more managable. The vnc.h file gains a bunch more function prototypes, for functions in vnc.c that were previously static, but now need to be accessed from the separate auth code files. The only TLS related code still in the main vl.c is the command line argument handling / setup, and the low level I/O routines calling gnutls_send/recv. Makefile | 11 b/vnc-auth-vencrypt.c | 167 ++++++++++++++ b/vnc-auth-vencrypt.h | 33 ++ b/vnc-tls.c | 414 +++++++++++++++++++++++++++++++++++ b/vnc-tls.h | 70 ++++++ vnc.c | 581 +++----------------------------------------------- vnc.h | 76 ++++-- 7 files changed, 780 insertions(+), 572 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6723 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Move VNC structs into header file ("Daniel P. Berrange")aliguori
This patch moves the definitions of VncState and VncDisplay structs out into a vnc.h header file. This is to allow the code for TLS and SASL auth mechanisms to be moved out of the main vnc.c file. vnc.c | 109 ------------------------------------------------ vnc.h | 149 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 148 insertions(+), 110 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6722 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Refactor keymap code to avoid duplication ("Daniel P. Berrange")aliguori
Each of the graphical frontends #include a .c file, for keymap code resulting in duplicated definitions & duplicated compiled code. A couple of small changes allowed this to be sanitized, so instead of doing a #include "keymaps.c", duplicating all code, we can have a shared keymaps.h file, and only compile code once. This allows the next patch to move the VncState struct out into a header file without causing clashing definitions. Makefile | 9 +++++--- b/keymaps.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ curses.c | 3 -- curses_keys.h | 9 +++----- keymaps.c | 45 ++++++++++++++++--------------------------- sdl.c | 3 -- sdl_keysym.h | 7 ++---- vnc.c | 5 +--- vnc_keysym.h | 7 ++---- 9 files changed, 97 insertions(+), 51 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6721 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Enhance 'info vnc' monitor output ("Daniel P. Berrange")aliguori
The current 'info vnc' monitor output just displays the VNC server address as provided by the -vnc command line flag. This isn't particularly useful since it doesn't tell you what VNC is actually listening on. eg, if you use '-vnc :1' it is useful to know whether this translated to '0.0.0.0:5901' or chose IPv6 ':::5901'. It is also useful to know the address of the client that is currently connected. It is also useful to know the active authentication (if any). This patch tweaks the monitor output to look like: (qemu) info vnc Server: address: 0.0.0.0:5902 auth: vencrypt+x509 Client: none And when 2 clients are connected (qemu) info vnc Server: address: 0.0.0.0:5902 auth: vencrypt+x509 Client: address: 10.33.6.67:38621 Client: address: 10.33.6.63:38620 More data will be added to this later in the patch series... The 'addr_to_string' helper method in this patch is overly generic for the needs of this patch alone. This is because it will be re-used by the later SASL patches in this series, where the flexibility is important. vnc.c | 137 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 127 insertions(+), 10 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6720 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Fix bug in TLS authentication ("Daniel P. Berrange")aliguori
This patch was previously posted here: http://lists.gnu.org/archive/html/qemu-devel/2009-02/msg00820.html In the case where the TLS handshake does *not* block on I/O, QEMU sends the next 'start sub-auth' message twice. This seriously confuses the VNC client :-) Fortunately the chances of the handshake not blocking are close to zero for a TCP socket, which is why it has not been noticed thus far. Even with both client & server on localhost, I can only hit the bug 1 time in 20. NB, the diff context here is not too informative. If you look at the full code you'll see that a few lines early we called vnc_start_tls() which called vnc_continue_handshake() which called the method start_auth_vencrypt_subauth(). Hence, fixing the bug, just involves removing the 2nd bogus call to start_auth_vencrypt_subauth() as per this patch. vnc.c | 8 -------- 1 file changed, 8 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6719 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Pass-through for gdbstub (Jan Kiszka)aliguori
Create a monitor terminal and pass it through the gdbstub. This allows to use gdb's monitor command to access the QEMU monitor. Works for all commands except for non-detached migration and password retrieval (user will receive error messages instead). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6718 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Introduce MONITOR_USE_READLINE flag (Jan Kiszka)aliguori
This allows to create monitor terminals that do not make use of the interactive readline back-end but rather send complete commands. The pass-through monitor interface of the gdbstub will be an example. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Improve mux'ed console experience (Jan Kiszka)aliguori
Up to now, you never really knew if you already switched the console after pressing CTRL-A C or if you mistyped it again. This patch clarifies the situation by providing a prompt in a new line and injecting a linebreak when switching away again. For this purpose, the two events CHR_EVENT_MUX_IN and CHR_EVENT_MUX_OUT are introduced and distributed on focus switches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6716 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Decouple terminals (Jan Kiszka)aliguori
Currently all registered (and activate) monitor terminals work in broadcast mode: Everyone sees what someone else types on some other terminal and what the monitor reports back. This model is broken when you have a management monitor terminal that is automatically operated and some other terminal used for independent guest inspection. Such additional terminals can be multiplexed device channels or a gdb frontend connected to QEMU's stub. Therefore, this patch decouples the buffers and states of all monitor terminals, allowing the user to operate them independently. It finally starts to use the 'mon' parameter that was introduced earlier with the API rework. It also defines the default monitor: the first instantance that has the MONITOR_IS_DEFAULT flag set, and that is the monitor created via the "-monitor" command line switch (or "vc" if none is given). As the patch requires to rework the monitor suspension interface, it also takes the freedom to make it "truely" suspending (so far suspending meant suppressing the prompt, but inputs were still processed). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Introduce ReadLineState (Jan Kiszka)aliguori
As another step towards decoupled monitor terminals encapsulate the state of the readline processor in a separate data structure called ReadLineState and adapt all interfaces appropriately. For now the monitor continues to instantiate just a single readline state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6714 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Drop banner hiding (Jan Kiszka)aliguori
There is no use for the hide/show banner option, and it is applied inconsistently anyway (or what makes the difference between -serial mon:stdio and -nographic for the monitor?). So drop this mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework terminal management (Jan Kiszka)aliguori
Remove the static MAX_MON limit by managing monitor terminals in a linked list. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6712 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework modal password input (Jan Kiszka)aliguori
Currently, waiting for the user to type in some password blocks the whole VM because monitor_readline starts its own I/O loop. And this loop also screws up reading passwords from virtual console. Patch below fixes the shortcomings by using normal I/O processing also for waiting on a password. To keep to modal property for the monitor terminal, the command handler is temporarily replaced by a password handler and a callback infrastructure is established to process the result before switching back to command mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Break out readline_show_prompt (Jan Kiszka)aliguori
Break readline_show_prompt out of readline_start so that (re-)printing the prompt can be controlled in a more fine-grained way. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Simplify password input mode (Jan Kiszka)aliguori
Drop the hack to query passwords on all monitor terminals now that they are requested when the user initially enters 'continue'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6708 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework early disk password inquiry (Jan Kiszka)aliguori
Reading the passwords for encrypted hard disks during early startup is broken (I guess for quiet a while now): - No monitor terminal is ready for input at this point - Forcing all mux'ed terminals into monitor mode can confuse other users of that channels To overcome these issues and to lay the ground for a clean decoupling of monitor terminals, this patch changes the initial password inquiry as follows: - Prevent autostart if there is some encrypted disk - Once the user tries to resume the VM, prompt for all missing passwords - Only resume if all passwords were accepted Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Report encrypted disks in snapshot mode (Jan Kiszka)aliguori
If the backing file is encrypted, 'info block' currently does not report the disk as encrypted. Fix this by using the standard API to check disk encryption mode. Moreover, switch to a canonical output format. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6706 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Use reasonable default virtual console size (Jan Kiszka)aliguori
If a target uses a tiny display (like the MusicPal), the default monitor is currently set to the same size. Fix this by applying the same defaults like already used serial and virtio consoles. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6705 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05block: Introduce bdrv_get_encrypted_filename (Jan Kiszka)aliguori
Introduce bdrv_get_encrypted_filename service to allow more informative password prompting. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6704 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05block: Improve bdrv_iterate (Jan Kiszka)aliguori
Make bdrv_iterate more useful by passing the BlockDriverState to the iterator instead of the device name. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6703 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05block: Polish error handling of brdv_open2 (Jan Kiszka)aliguori
Make sure that we always delete temporary disk images on error, remove obsolete malloc error checks and return proper error codes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6702 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05char-mux: Use separate input buffers (Jan Kiszka)aliguori
Currently, the intermediate input buffer of mux'ed character devices records data across all sub-devices. This has the side effect that we easily leak data recorded over one sub-devices to another once we switch the focus. Avoid data loss and confusion by defining exclusive buffers. Note: In contrast to the original author's claim, the buffering concept still breaks down when the fifo of the currently active sub-device is full. As we cannot accept futher data from this point on without risking to loose it, we will also miss escape sequences, just like without all that buffering. In short: There is no reliable escape sequence handling without infinite buffers or the risk of loosing some data. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6701 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05char: Fix initial reset (Jan Kiszka)aliguori
Recent changes to the graphical console initialization broke the initial CHR_EVENT_RESET distribution. The reset BHs generated on char device initialization are now already consumed during machine init (ide init ... -> qemu_aio_wait -> qemu_bh_poll). Therefore, this patch moves the initial qemu_chr_reset calls into a separate funtion which is called after machine init. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6700 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05Fix cpuid KVM crash on i386 (Lubomir Rintel)aliguori
Cpuid should return into vec, not overwrite past address in count. Changeset 6565 broke this. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6689 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05lsi: add ISTAT1 register read (Ryan Harper)aliguori
SLES10 SP2 installer complains when probing a scsi disk and exits qemu when failing to read one of the registers. lsi_scsi: error: readb 0x15 -- Ryan Harper Software Engineer; Linux Technology Center IBM Corp., Austin, Tx ryanh@us.ibm.com diffstat output: lsi53c895a.c | 2 ++ 1 files changed, 2 insertions(+) Signed-off-by: Ryan Harper <ryanh@us.ibm.com> --- Subject: [PATCH] lsi: add ISTAT1 register read From: Ryan Harper <ryanh@us.ibm.com> Cc: kvm@vger.kernel.org SLES10 SP2 installer complains when probing a scsi disk and exits qemu when failing to read one of the registers. lsi_scsi: error: readb 0x15 Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6688 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04Add version information for 0.10.0 release.aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6685 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04Fix "info registers" under kvm.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6684 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04Update cocoa.m to match new DisplayState code (Samuel Benson)aliguori
Version 2 does as follows: [1]: Corrects endianness on issues by using native BGR to RGB conversion [2]: Uses DisplayState accessors for obtaining graphics context information, which [3]: Removes now unused variables, and [4]: Allows reading of varying color modes (32bit/24/16), and converting to native colorspace [5]: Attempts to keep itself centered on screen (as opposed to bottom right, which immediately goes off screen after bios load) on context changes (window resizes) Testing working on i386 (gentoo, Windows 2000) and PPC (debian) guests on PPC and x86 Macs. In regards to [4], Windows 2000 displays fine on quick tests, but on the lowest setting I could test, 16bit color depth at 4bpp, colors are slightly off. I used gentoo install-x86-minimal-2008.0 in framebuffer mode to test above setting; the usual grey text is now blue, and Tux appears to be BGR shifted. I do not know if previous code worked at such a low color setting. Signed-off-by: Samuel Benson <qemu_ml@digitalescape.info> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6683 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04The different VFP variants will never occur at the same time, and giving thempbrook
different names confuses GDB, so use org.gnu.gdb.arm.vfp for all of them. Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6682 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-04DB-DMA IDE asynchronous I/Oaurel32
Signed-off-by: Laurent Vivier <Laurent@vivier.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6681 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03Fix slavio_intctl.c compile errors (Robert Reif)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6680 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03CRIS: Avoid endless loops for unstested CRIS cpu-state load/save.edgar_igl
Fix several endless loops. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6679 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03Fix SDL on evdev hosts (Anthony Liguori)aliguori
This patch corrects SDL support on X11 hosts using evdev. It's losely based on the previous patch by Dustin Kirkland and the evdev support code in gtk-vnc written by Daniel Berrange. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6678 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03Fix CVE-2008-0928 - insufficient block device address range checking ↵aliguori
(Anthony Liguori) Introduce a growable flag that's set by bdrv_file_open(). Block devices should never be growable, only files that are being used by block devices. I went through Fabrice's early comments about the patch that was first applied. While I disagree with that patch, I also disagree with Fabrice's suggestion. There's no good reason to do the checks in the block drivers themselves. It just increases the possibility that this bug could show up again. Since we're calling bdrv_getlength() to determine the length, we're giving the block drivers a chance to chime in and let us know what range is valid. Basically, this patch makes the BlockDriver API guarantee that all requests are within 0..bdrv_getlength() which to me seems like a Good Thing. What do others think? Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6677 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03DB-DMA cleanupaurel32
Signed-off-by: Laurent Vivier <Laurent@vivier.eu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6676 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03SH4: Fixed last UTLB unused and URB/URC managementaurel32
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6675 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03fix SIGSEGV when USE_KQEMU is definedaurel32
Signed-off-by: Alex Ivanov <void@aleksoft.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6674 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03sh4: r2d fix no ide/net caseaurel32
Fix invalid access/crash when there is no IDE device or NET device. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Tested-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6673 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 15:50:05 +0000