aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-08qemu-iotests/109: Fix lock race conditionCleber Rosa
A race condition is currently present between the clean up attempt of the QEMU process and the execution of qemu-img. The actual (bad) output is: -Warning: Image size mismatch! -Images are identical. +qemu-img: Could not open '<build_dir>/tests/qemu-iotests/scratch/t.raw': Failed to get "consistent read" lock +Is another process using the image? A KILL signal is sent to the QEMU process, but qemu-img may begin to run before the QEMU process is really gone. qemu-img will then attempt to open the TEST_IMG file before it can secure a lock on it. This attempts a more graceful shutdown, and waits for the QEMU process to exit. Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: fix for rc2 It turns out there's a way to setup SHPC on Q35: just put a PCI to PCI bridge behind a DMI to PCI one. Our _OSC is thus incorrect. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 07 Aug 2017 22:39:20 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: cpu: add APIs to allocate/free CPU environment hw/i386: allow SHPC for Q35 machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-08cpu: add APIs to allocate/free CPU environmentMichael S. Tsirkin
These will be implemented and then used by follow-up patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-08hw/i386: allow SHPC for Q35 machineAleksandr Bezzubikov
Unmask previously masked SHPC feature in _OSC method. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-07hw/arm/virt: Add 2.10 machine typeEric Auger
Add virt-2.10 machine type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1502106581-11714-1-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-07Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Mon 07 Aug 2017 12:03:54 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: block: move trace probes into bdrv_co_preadv|pwritev Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-07block: move trace probes into bdrv_co_preadv|pwritevDaniel P. Berrange
There are trace probes in bdrv_co_readv|writev, however, the block drivers are being gradually moved over to using the bdrv_co_preadv|pwritev functions instead. As a result some block drivers miss the current probes. Move the probes into bdrv_co_preadv|pwritev instead, so that they are triggered by more (all?) I/O code paths. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170804105036.11879-1-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-04Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170803' into stagingPeter Maydell
Queued misc tcg patches # gpg: Signature made Thu 03 Aug 2017 19:07:18 BST # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-tcg-20170803: tcg: Increase minimum alignment from tcg_malloc to 8 target/s390x: Fix CSST for 16-byte store tcg/arm: Fix runtime overalignment test Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-04Merge remote-tracking branch 'remotes/ehabkost/tags/machine-pull-request' ↵Peter Maydell
into staging cpu: crash fix (don't allow negative core id) # gpg: Signature made Thu 03 Aug 2017 18:57:41 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-pull-request: cpu: don't allow negative core id Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-04Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170803' into stagingPeter Maydell
MIPS patches 2017-08-03 Changes: KVM T&E segment support for TCG malta: leave space for the bootmap after the initrd Apply CP0.PageMask before writing into TLB entry Fix fallout from indirect branch optimisation # gpg: Signature made Thu 03 Aug 2017 15:32:59 BST # gpg: using RSA key 0x2238EB86D5F797C2 # gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2 * remotes/yongbok/tags/mips-20170803: target/mips: Fix RDHWR CC with icount target/mips: Drop redundant gen_io_start/stop() target/mips: Use BS_EXCP where interrupts are expected target-mips: apply CP0.PageMask before writing into TLB entry mips: Add KVM T&E segment support for TCG mips: Improve segment defs for KVM T&E guests mips/malta: leave space for the bootmap after the initrd target-mips: Don't stop on [d]mtc0 DESAVE/KScratch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: fix for rc2 Looks like the constant stream of additions of vhost-user devices is a problem for some people who are concerned about external connections from qemu. A per-device flag seems like an overkill, but a single configure flag seems like a sane way to support that, and it looks like we need to do it before the release. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 03 Aug 2017 13:57:57 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: build-sys: add --disable-vhost-user Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-04Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell
staging slirp updates # gpg: Signature made Wed 02 Aug 2017 23:27:41 BST # gpg: using RSA key 0x9E511E01C737F075 # gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: 9A37 3D36 64A8 DC62 DA0A 34FD 9E51 1E01 C737 F075 * remotes/thibault/tags/samuel-thibault: slirp: check len against dhcp options array end slirp: fill error when failing to initialize user network Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-03tcg: Increase minimum alignment from tcg_malloc to 8Richard Henderson
For a 64-bit ILP32 host, aligning to sizeof(long) is not enough. Guess the minimum for any host is 8, as that covers uint64_t. Qemu doesn't use a host long double or host vectors, except in extremely limited circumstances. Fixes a bus error for a sparc v8plus host. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-08-03target/s390x: Fix CSST for 16-byte storeRichard Henderson
Found by Coverity (CID 1378273). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-08-03tcg/arm: Fix runtime overalignment testRichard Henderson
Patch 85aa80813dd changed the IF emitting the TST instruction, but failed to change the ?: converting CMP to CMPEQ, so the result of the TST is ignored. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-08-03build-sys: add --disable-vhost-userMarc-André Lureau
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it enabled by default on non-win32, that is assumed to be POSIX. Fail if trying to enable it on win32. When trying to make a vhost-user netdev, it gives the following error: -netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type And similar error with the HMP/QMP monitors. While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST since it's a vhost-user specific variable. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-03slirp: check len against dhcp options array endPrasad J Pandit
While parsing dhcp options string in 'dhcp_decode', if an options' length 'len' appeared towards the end of 'bp_vend' array, ensuing read could lead to an OOB memory access issue. Add check to avoid it. This is CVE-2017-11434. Reported-by: Reno Robert <renorobert@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-08-03slirp: fill error when failing to initialize user networkHervé Poussineau
With "-netdev user,id=net0,dns=1.2.3.4" error was: qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: Device 'user' could not be initialized Error is now: qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: DNS doesn't belong to network Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-08-02cpu: don't allow negative core idLaurent Vivier
With pseries machine type a negative core-id is not managed properly: -1 gives an inaccurate error message ("core -1 already populated"), -2 crashes QEMU (core dump) As it seems a negative value is invalid for any architecture, instead of checking this in spapr_core_pre_plug() I think it's better to check this in the generic part, core_prop_set_core_id() Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170802103259.25940-1-lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-08-02target/mips: Fix RDHWR CC with icountJames Hogan
RDHWR CC reads the CPU timer like MFC0 CP0_Count, so with icount enabled it must set can_do_io while it calls the helper to avoid the "Bad icount read" error. It should also break out of the translation loop to ensure that timer interrupts are immediately handled. Fixes: 2e70f6efa8b9 ("Add instruction counter.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target/mips: Drop redundant gen_io_start/stop()James Hogan
DMTC0 CP0_Cause does a redundant gen_io_start() and gen_io_end() pair, even though this is done for all DMTC0 operations outside of the switch statement. Remove these redundant calls. Fixes: 5dc5d9f055c5 ("mips: more fixes to the MIPS interrupt glue logic") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target/mips: Use BS_EXCP where interrupts are expectedJames Hogan
Commit e350d8ca3ac7 ("target/mips: optimize indirect branches") made indirect branches able to directly find the next TB and jump straight to it without breaking out of translated code and going around the main execution loop. This breaks the assumption in target/mips/translate.c that BS_STOP is sufficient to cause pending interrupts to be handled, since interrupts are only checked in the main loop. Fix a few of these assumptions by using gen_save_pc to update the saved PC and using BS_EXCP instead of BS_STOP: - [D]MFC0 CP0_Count may trigger a timer interrupt which should be immediately handled. - [D]MTC0 CP0_Cause may trigger an interrupt (but in fact translation was only even being stopped in the DMTC0 case). - [D]MTC0 CP0_<any> when icount is used is assumed could potentially cause interrupts. - EI may trigger an interrupt which was pending. I specifically hit this case when running KVM nested in mipsel-softmmu. A timer interrupt while the 2nd guest was executing is caught by KVM which switches back to the normal Linux exception base and re-enables interrupts with EI. Since the above commit QEMU doesn't leave translated code until the nested KVM has already restored the KVM exception base and returned to the 2nd guest, at which point it is too late to check for pending interrupts and it gets stuck in an infinite loop of unhandled interrupts. Something similar was needed for ARM in commit b29fd33db578 ("target/arm: use DISAS_EXIT for eret handling"). Fixes: e350d8ca3ac7 ("target/mips: optimize indirect branches") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target-mips: apply CP0.PageMask before writing into TLB entryLeon Alrae
PFN0 and PFN1 have to be masked out with PageMask_Mask. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [Yongbok Kim: Added commit message] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips: Add KVM T&E segment support for TCGJames Hogan
MIPS KVM trap & emulate guest kernels have a different segment layout compared with traditional MIPS kernels, to allow both the user and kernel code to run from the user address segment without repeatedly trapping to KVM. QEMU currently supports this layout only for KVM, but its sometimes useful to be able to run these kernels in QEMU on a PC, so enable it for TCG too. This also paves the way for MIPS KVM VZ support (which uses the normal virtual memory layout) by abstracting whether user mode kernel segments are in use. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reviewed-by: Richard Henderson <rth@twiddle.net> [Yongbok Kim: minor change] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips: Improve segment defs for KVM T&E guestsJames Hogan
Improve the segment definitions used by get_physical_address() to yield target_ulong types, e.g. 0xffffffff80000000 instead of 0x80000000. This is in preparation for enabling emulation of MIPS KVM T&E segments in TCG MIPS targets, which unlike KVM could potentially have 64-bit target_ulong. In such a case the offset guest KSEG0 address ends up at e.g. 0x000000008xxxxxxx instead of 0xffffffff8xxxxxxx. This also allows the casts to int32_t that force sign extension to be removed, which removes any confusion due to relational comparison of unsigned (target_ulong) and signed (int32_t) types. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02mips/malta: leave space for the bootmap after the initrdAurelien Jarno
Since commit 9768e2abf7 the initrd is loaded at the end of the low memory to avoid clash for the kernel relocation when kaslr is used. However this in turn conflicts with the bootmap memory that the kernel tries to place after initrd, but in low memory. The bootmap spans the whole usable physical address space. The machine can have at most 2GiB of memory, 256MiB of low memory mapped at 0x00000000, and 1792MiB of high memory mapped at 0x90000000. The biggest bootmap therefore corresponds to the adresses 0x00000000 -> 0xffffffff, which at 1 bit per 4kiB page corresponds to 128kiB in memory. Therefore reserve 128kiB after the initrd. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02target-mips: Don't stop on [d]mtc0 DESAVE/KScratchJames Hogan
Writing to the MIPS DESAVE register (and now the KScratch registers) will stop translation, supposedly due to risk of execution mode switches. However these registers are basically RW scratch registers with no side effects so there is no risk of them triggering execution mode changes. Drop the bstate = BS_STOP for these registers for both mtc0 and dmtc0. Fixes: 7a387fffce50 ("Add MIPS32R2 instructions, and generally straighten out the instruction decoding. This is also the first percent towards MIPS64 support.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-08-02Update version for v2.10.0-rc1 releasev2.10.0-rc1Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02tests/hmp: Fix typo in the 'chardev-send-break' testThomas Huth
testchardev2 is not a valid chardev id here. Use testchardev1 instead which has been created with chardev-add right before the 'chardev-send-break' line. And while we're at it, add the test-hmp.c file to the MAINTAINERS file, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1501149097-19071-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20170802a' into staging Migration pull 2017-08-02 Just minor fixes for 2.10 # gpg: Signature made Wed 02 Aug 2017 14:55:21 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170802a: io: fix qio_channel_socket_accept err handling migration: fix comment disorder in RAMState migration: fix small leaks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02io: fix qio_channel_socket_accept err handlingPeter Xu
When accept failed, we should setup errp with the reason. More importantly, the caller may assume errp be non-NULL when error happens, and not setting the errp may crash QEMU. At the same time, move the trace_qio_channel_socket_accept_fail() after the if check on EINTR. Two reasons: 1. when EINTR happened, it's not really a fault (we should just try again), so we should not log with an "accept failure". 2. trace_*() functions may overwrite errno, then the old errno will be missing. We need to either check errno before trace_*() calls, or reserve the errno. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1501666880-10159-3-git-send-email-peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-08-02migration: fix comment disorder in RAMStatePeter Xu
Comments for "migration_dirty_pages" and "bitmap_mutex" are switched. Fix it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1501666880-10159-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-08-02migration: fix small leaksMarc-André Lureau
Spotted thanks to valgrind and tests/device-introspect-test: ==11711== 1 bytes in 1 blocks are definitely lost in loss record 6 of 14,537 ==11711== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299) ==11711== by 0x1E0CDBD8: g_malloc (gmem.c:94) ==11711== by 0x1E0E696E: g_strdup (gstrfuncs.c:363) ==11711== by 0x695693: migration_instance_init (migration.c:2226) ==11711== by 0x717C4B: object_init_with_type (object.c:344) ==11711== by 0x717E80: object_initialize_with_type (object.c:375) ==11711== by 0x7182EB: object_new_with_type (object.c:483) ==11711== by 0x718328: object_new (object.c:493) ==11711== by 0x4B8A29: qmp_device_list_properties (qmp.c:542) ==11711== by 0x4A9561: qmp_marshal_device_list_properties (qmp-marshal.c:1425) ==11711== by 0x819D4A: do_qmp_dispatch (qmp-dispatch.c:104) ==11711== by 0x819E82: qmp_dispatch (qmp-dispatch.c:131) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170801160419.14180-1-marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-08-02Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, acpi, virtio: fixes, test speedup for rc1 Some fixes all over the place. Notably vhost-user gained a new message to set endian-ness. Borderline for 2.10 but seems to be the only way to fix legacy guests. Also pc tests are run on kvm now. Not a fix at all but doesn't touch qemu itself, so I merged it since I had to run these a lot and I just got tired of waiting for these to finish. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 01 Aug 2017 22:36:47 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: pc: acpi: force FADT rev1 for 440fx based machine types pc: make 'pc.rom' readonly when machine has PCI enabled vhost-user: fix watcher need be removed when vhost-user hotplug tests/bios-tables-test: Compiler warning fix accel: cleanup error output intel_iommu: use access_flags for iotlb intel_iommu: fix iova for pt vhost-user: fix legacy cross-endian configurations vhost: fix a memory leak tests: switch pxe and vm gen id tests to use kvm Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02pc: acpi: force FADT rev1 for 440fx based machine typesIgor Mammedov
w2k used to boot on QEMU until revision of FADT has been bumped to rev3 (commit 77af8a2b hw/i386: Use Rev3 FADT (ACPI 2.0) instead of Rev1 to improve guest OS support.) Keep PC machine at rev1 to remain compatible and Q35 at rev3 where w2k isn't supported anyway so OSX could run as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Tested-by: John Arbuckle <programmingkidx@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02pc: make 'pc.rom' readonly when machine has PCI enabledIgor Mammedov
looking at bios ROM mapping in QEMU it seems that only isapc (i.e. not PCI enabled machine) requires ROM being mapped as RW in other cases BIOS is mapped as RO. Do the same for option ROM 'pc.rom' when machine has PCI enabled. As useful side-effect pc.rom MemoryRegion stops being put in vhost memory map (filtered out by vhost_section()), which reduces number of entries by 1. Coincidentally it fixes migration failure reported in "[PATCH V2] vhost: fix a migration failed because of vhost region merge" where following destination CLI with /sys/module/vhost/parameters/max_mem_regions = 8 export DIMMSCOUNT=6 QEMU -enable-kvm \ -netdev type=tap,id=guest0,vhost=on,script=no,vhostforce \ -device virtio-net-pci,netdev=guest0 \ -m 256,slots=256,maxmem=2G \ `i=0; while [ $i -lt $DIMMSCOUNT ]; do echo \ "-object memory-backend-ram,id=m$i,size=128M \ -device pc-dimm,id=d$i,memdev=m$i"; i=$(($i + 1)); \ done` will fail to startup with error: "-device pc-dimm,id=d5,memdev=m5: a used vhost backend has no free memory slots left" while it's possible to add the 6th DIMM during hotplug on source. Issue is caused by the fact that number of entries in vhost map is bigger on 1 entry, when -device is processed, than after guest boots up, and that offending entry belongs to 'pc.rom', it's not like vhost intends to do IO in ROM range so making it RO hides region from vhost and makes number of entries in vhost memory map at -device/machine_done time match number of entries after guest boots. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Peng Hao <peng.hao2@zte.com.cn> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02vhost-user: fix watcher need be removed when vhost-user hotplugYunjian Wang
"nc" is freed after hotplug vhost-user, but the watcher is not removed. The QEMU crash when the watcher access the "nc" when socket disconnects. Program received signal SIGSEGV, Segmentation fault. #0 object_get_class (obj=obj@entry=0x2) at qom/object.c:750 #1 0x00007f9bb4180da1 in qemu_chr_fe_disconnect (be=<optimized out>) at chardev/char-fe.c:372 #2 0x00007f9bb40d1100 in net_vhost_user_watch (chan=<optimized out>, cond=<optimized out>, opaque=<optimized out>) at net/vhost-user.c:188 #3 0x00007f9baf97f99a in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #4 0x00007f9bb41d7ebc in glib_pollfds_poll () at util/main-loop.c:213 #5 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261 #6 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:515 #7 0x00007f9bb3e266a7 in main_loop () at vl.c:1917 #8 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4786 Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02tests/bios-tables-test: Compiler warning fixDr. David Alan Gilbert
gcc 7.1.1 in fedora 26 moans about the: tables = g_new0(uint32_t, tables_nr) because it can't convince itself that tables_nr is positive. This is fallout from g_assert_cmpint no longer necessarily being no-return; replace it with a plain g_assert. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-08-02accel: cleanup error outputLaurent Vivier
Only emit "XXX accelerator not found", if there are not further accelerators listed. eg accel=kvm:tcg doesn't print a "KVM accelerator not found" warning when it falls back to tcg, but a accel=kvm prints a warning, since no fallback is given. Suggested-by: Daniel P. Berrange <berrange@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com>
2017-08-02intel_iommu: use access_flags for iotlbPeter Xu
It was cached by read/write separately. Let's merge them. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02intel_iommu: fix iova for ptPeter Xu
IOMMUTLBEntry.iova is returned incorrectly on one PT path (though mostly we cannot really trigger this path, even if we do, we are mostly disgarding this value, so it didn't break anything). Fix it by converting the VTD_PAGE_MASK into the correct definition VTD_PAGE_MASK_4K, then remove VTD_PAGE_MASK. Fixes: b93130 ("intel_iommu: cleanup vtd_{do_}iommu_translate()") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02vhost-user: fix legacy cross-endian configurationsFelipe Franciosi
Currently, vhost-user does not implement any means for notifying the backend about guest endianess. This commit introduces a new message called VHOST_USER_SET_VRING_ENDIAN which is analogous to the ioctl() called VHOST_SET_VRING_ENDIAN used for kernel vhost backends. Such message is necessary for backends supporting legacy (pre-1.0) virtio devices running in big-endian guests. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Signed-off-by: Mike Cui <cui@nutanix.com>
2017-08-02vhost: fix a memory leakPeng Hao
vhost exists a call for g_file_get_contents, but not call g_free. Signed-off-by: Peng Hao<peng.hao2@zte.com.cn> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-08-02tests: switch pxe and vm gen id tests to use kvmMichael S. Tsirkin
Speed up tests on host systems with kvm support. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Xen fix (Anthony) * chardev fixes (Anton, Marc-André) * small dead code removal (Zhongyi) * documentation (Dan) * bugfixes (David) * decrease migration downtime (Jay) * improved error output (Laurent) * RTC tests and bugfix (me) * Bluetooth clang analyzer fix (me) * KVM CPU hotplug race (Peng Hao) * Two other patches from Philippe's clang analyzer series # gpg: Signature made Tue 01 Aug 2017 16:56:21 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: mc146818rtc: implement UIP latching as intended mc146818rtc: simplify check_update_timer rtc-test: introduce more update tests rtc-test: cleanup register_b_set_flag test hw/scsi/vmw_pvscsi: Convert to realize hw/scsi/vmw_pvscsi: Remove the dead error handling migration: optimize the downtime qemu-options: document existance of versioned machine types bt: stop the sdp memory allocation craziness exec: Add lock parameter to qemu_ram_ptr_length target-i386: kvm_get/put_vcpu_events don't handle sipi_vector docs: document deprecation policy & deprecated features in appendix char: don't exit on hmp 'chardev-add help' char-fd: remove useless chr pointer accel: cleanup error output cpu_physical_memory_sync_dirty_bitmap: Fix alignment check vl.c/exit: pause cpus before closing block devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-01Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches for 2.10.0-rc1 # gpg: Signature made Tue 01 Aug 2017 17:10:52 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: block/qapi: Remove redundant NULL check to silence Coverity qemu-iotests/059: Fix leaked image files qemu-iotests/063: Fix leaked image qemu-iotests/162: Fix leaked temporary files qemu-iotests/153: Fix leaked scratch images qemu-iotests/141: Fix image cleanup qemu-iotests: Remove blkdebug.conf after tests qemu-iotests/041: Fix leaked scratch images block: fix leaks in bdrv_open_driver() block: fix dangling bs->explicit_options in block.c iotests: Add test of recent fix to 'qemu-img measure' iotests: Check dirty bitmap statistics in 124 iotests: Redirect stderr to stdout in 186 iotests: Fix test 156 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-01block/qapi: Remove redundant NULL check to silence CoverityKevin Wolf
When skipping implicit nodes in bdrv_block_device_info(), we know that bs0 is always non-NULL; initially, because it's taken from a BdrvChild and a BdrvChild never has a NULL bs, and after the first iteration because implicit nodes always have a backing file. Remove the NULL check and add an assertion that the implicit node does indeed have a backing file. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2017-08-01qemu-iotests/059: Fix leaked image filesKevin Wolf
qemu-iotests 059 left a whole lot of image files behind in the scratch directory because VMDK creates additional files for extents and cleaning them up requires the original image intact (it parses qemu-img info output to find all extent files), but the image overwrote it many times like it works for all other image formats. In addition, _use_sample_img overwrites the TEST_IMG variable, causing new images created afterwards to reuse the name of the sample file rather than the usual t.IMGFMT. This patch adds an intermediate _cleanup_test_img after each subtest that created an image file with additional extent files, and also after each use of a sample image. _cleanup_test_img is also changed so that it resets TEST_IMG after a sample image is cleaned up. Note that this test was failing before this commit and continues to do so after it. This failure was introduced in commit 9877860 ('block/vmdk: Report failures in vmdk_read_cid()') and needs to be dealt with separately. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/063: Fix leaked imageKevin Wolf
qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because it used the wrong suffix. Make sure to clean it up after completing the test. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/162: Fix leaked temporary filesKevin Wolf
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and potentially a file called '42' in the current directory. Make sure to clean it up after completing the tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>