aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-11target-arm: make TTBR0/1 bankedFabian Aggeler
Adds secure and non-secure bank register suport for TTBR0 and TTBR1. Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as well as a CP register definition for TTBR0_EL3. Added a union containing both EL based array fields and secure and non-secure fields mapped to them. Updated accesses to use A32_BANKED_CURRENT_REG_GET macro. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-17-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make CSSELR bankedFabian Aggeler
Rename CSSELR (cache size selection register) and add secure instance (AArch32). Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-16-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFIFabian Aggeler
Add checks of SCR AW/FW bits when performing writes of CPSR. These SCR bits are used to control whether the CPSR masking bits can be adjusted from non-secure state. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-15-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add SCTLR_EL3 and make SCTLR bankedFabian Aggeler
Implements SCTLR_EL3 and uses secure/non-secure instance when needed. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-14-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add MVBAR supportFabian Aggeler
Use MVBAR register as exception vector base address for exceptions taken to CPU monitor mode. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-13-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add SDER definitionGreg Bellows
Added CP register defintions for SDER and SDER32_EL3 as well as cp15.sder for register storage. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-12-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add NSACR registerFabian Aggeler
Implements NSACR register with corresponding read/write functions for ARMv7 and ARMv8. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-11-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: implement IRQ/FIQ routing to Monitor modeFabian Aggeler
SCR.{IRQ/FIQ} bits allow to route IRQ/FIQ exceptions to monitor CPU mode. When taking IRQ exception to monitor mode FIQ exception is additionally masked. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-10-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: move AArch32 SCR into security reglistFabian Aggeler
Define a new ARM CP register info list for the ARMv7 Security Extension feature. Register that list only for ARM cores with Security Extension/EL3 support. Moving AArch32 SCR into Security Extension register group. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-9-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: insert AArch32 cpregs twice into hashtableFabian Aggeler
Prepare for cp register banking by inserting every cp register twice, once for secure world and once for non-secure world. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-8-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add secure state bit to CPREG hashPeter Maydell
Added additional NS-bit to CPREG hash encoding. Updated hash lookup locations to specify hash bit currently set to non-secure. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-7-git-send-email-greg.bellows@linaro.org [PMM: fix uses of ENCODE_CP_REG in kvm32.c to add extra argument] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add CPREG secure state supportFabian Aggeler
Prepare ARMCPRegInfo to support specifying two fieldoffsets per register definition. This will allow us to keep one register definition for banked registers (different offsets for secure/ non-secure world). Also added secure state tracking field and flags. This allows for identification of the register info secure state. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-6-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add non-secure Translation Block flagSergey Fedorov
This patch is based on idea found in patch at git://github.com/jowinter/qemu-trustzone.git f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by Johannes Winter <johannes.winter@iaik.tugraz.at>. The TBFLAG captures the SCR NS secure state at the time when a TB is created so the correct bank is accessed on system register accesses. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-5-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add banked register accessorsFabian Aggeler
If EL3 is in AArch32 state certain cp registers are banked (secure and non-secure instance). When reading or writing to coprocessor registers the following macros can be used. - A32_BANKED macros are used for choosing the banked register based on provided input security argument. This macro is used to choose the bank during translation of MRC/MCR instructions that are dependent on something other than the current secure state. - A32_BANKED_CURRENT macros are used for choosing the banked register based on current secure state. This is NOT to be used for choosing the bank used during translation as it breaks monitor mode. If EL3 is operating in AArch64 state coprocessor registers are not banked anymore. The macros use the non-secure instance (_ns) in this case, which is architecturally mapped to the AArch64 EL register. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add async excp target_el functionGreg Bellows
Adds a dedicated function and a lookup table for determining the target exception level of IRQ and FIQ exceptions. The lookup table is taken from the ARMv7 and ARMv8 specification exception routing tables. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-3-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: extend async excp maskingGreg Bellows
This patch extends arm_excp_unmasked() to use lookup tables for determining whether IRQ and FIQ exceptions are masked. The lookup tables are based on the ARMv8 and ARMv7 specification physical interrupt masking tables. If EL3 is using AArch64 IRQ/FIQ masking is ignored in all exception levels other than EL3 if SCR.{FIQ|IRQ} is set to 1 (routed to EL3). Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-2-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Add the "-semihosting-config" option.Liviu Ionescu
The usual semihosting behaviour is to process the system calls locally and return; unfortuantelly the initial implementation dinamically changed the target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb, is not implemented. The result was that during debug sessions the semihosting calls were discarded. This patch adds a configuration variable and an option to set it on the command line: -semihosting-config [enable=on|off,]target=native|gdb|auto This option enables semihosting and defines where the semihosting calls will be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which means 'gdb' during debug sessions and 'native' otherwise. Signed-off-by: Liviu Ionescu <ilg@livius.net> Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net [PMM: moved declaration and definition of semihosting_target to gdbstub.h and gdbstub.c to fix build failure on linux-user] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Pass semihosting exit code back to system.Liviu Ionescu
In order to run unit tests under semihosting, it is necessary to pass the application exit code back to the system. ARM defines only the code to be used for non-error application exit (ADP_Stopped_ApplicationExit), all other codes should return non-zero exit codes. This patch checks if the application code passed via TARGET_SYS_EXIT is ADP_Stopped_ApplicationExit, and return 0, otherwise return 1. Signed-off-by: Liviu Ionescu <ilg@livius.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Merge remote-tracking branch ↵Peter Maydell
'remotes/bkoppelmann/tags/pull-tricore-20141210' into staging TriCore BOL, BRC, BRN, BRR, RC, RCPW, RCRR, RCR, RLC and RCR insn added # gpg: Signature made Wed 10 Dec 2014 11:21:58 GMT using RSA key ID 6B69CA14 # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" * remotes/bkoppelmann/tags/pull-tricore-20141210: target-tricore: Add instructions of RCR opcode format target-tricore: Add instructions of RLC opcode format target-tricore: Add instructions of RCPW, RCRR and RCRW opcode format target-tricore: Make TRICORE_FEATURES implying others. target-tricore: Add instructions of RC opcode format target-tricore: Add instructions of BRR opcode format target-tricore: Add instructions of BRN opcode format target-tricore: Add instructions of BRC opcode format target-tricore: Add instructions of BOL opcode format Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20141210-1' into ↵Peter Maydell
staging vnc-enc-tight fix, keymaps code style. # gpg: Signature made Wed 10 Dec 2014 09:24:33 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vnc-20141210-1: keymaps: correct keymaps.c following Qemu coding style vnc-enc-tight: fix Arguments in wrong order Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-10target-tricore: Add instructions of RCR opcode formatBastian Koppelmann
Add instructions of RCR opcode format. Add helper for madd32/64_ssov and madd32/64_suov. Add helper for msub32/64_ssov and msub32/64_suov. Add microcode generator function madd/msub for 32bit and 64bit, which calculate a mul and a add/sub. OPC2_32_RCR_MSUB_U_32 -> OPC2_32_RCR_MSUB_U_32. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of RLC opcode formatBastian Koppelmann
Add instructions of RLC opcode format. Add helper psw_write/read. Add microcode generator gen_mtcr/mfcr, which loads/stores a value to a core special function register, which are defined in csfr.def Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of RCPW, RCRR and RCRW opcode formatBastian Koppelmann
Add instructions of RCPW, RCRR and RCRW opcode format. Add microcode generator function gen_insert. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Make TRICORE_FEATURES implying others.Bastian Koppelmann
Since all the TriCore instructionsets are subsets of each other (1.3 C 1.3.1 C 1.6), make the features implying each other, e.g 1.6 also has 1.3.1 and 1.3. This way we only need to check our features for the instructionset, where a instruction was first introduced. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of RC opcode formatBastian Koppelmann
Add instructions of RC opcode format. Add helper for mul, sha, absdif with signed saturation on overflow. Add helper for add, sub, mul with unsigned saturation on overflow. Add microcode generator functions: * gen_add_CC, which calculates the carry bit. * gen_addc_CC, which adds the carry bit to the add and calculates the carry bit. * gen_absdif, which calculates the absolute difference. * gen_mul_i64s/u, which mul two 32 bits val into one 64bit reg. * gen_sh_hi, which shifts two 16bit words in one reg. * gen_sha_hi, which does a arithmetic shift on two 16bit words. * gen_sh_cond, which shifts left a reg by one and writes the result of cond into the lsb. * gen_accumulating_cond, which ands/ors/xors the result of cond of the lsbs with the lsb of the result. * gen_eqany_bi/hi, which checks ever byte/hword on equality. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of BRR opcode formatBastian Koppelmann
Add instructions of BRR opcode format. Add MASK_OP_BRR_DISP15_SEXT. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of BRN opcode formatBastian Koppelmann
Add instructions of BRN opcode format. Add MASK_OP_BRN_DISP15_SEXT. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of BRC opcode formatBastian Koppelmann
Add instructions of BRC opcode format. Fixed OP2_BRC_JGE -> OP2_32_BRC_JGE Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10target-tricore: Add instructions of BOL opcode formatBastian Koppelmann
Add instructions of BOL opcode format. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-12-10keymaps: correct keymaps.c following Qemu coding styleGonglei
It's hard to read because of the confused coding style in this file. Let's correct it following Qemu coding style. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-10vnc-enc-tight: fix Arguments in wrong orderGonglei
Arguments in wrong order (SWAPPED_ARGUMENTS) The positions of arguments in the call to tight_fill_palette do not match the ordering of the parameters: &fg is passed to bg &bg is passed to fg Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-09Open 2.3 development treePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-09Update version for v2.2.0 releasev2.2.0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-04Update version for v2.2.0-rc5 releasev2.2.0-rc5Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-04Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/pull-cve-2014-8106-20141204-1' into staging cirrus: fix blit region check # gpg: Signature made Thu 04 Dec 2014 11:54:57 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-cve-2014-8106-20141204-1: cirrus: don't overflow CirrusVGAState->cirrus_bltbuf cirrus: fix blit region check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01Update version for v2.2.0-rc4 releasev2.2.0-rc4Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01vhost: Fix vhostfd leak in error branchGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417166789-1960-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01cirrus: don't overflow CirrusVGAState->cirrus_bltbufGerd Hoffmann
This is CVE-2014-8106. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-01cirrus: fix blit region checkGerd Hoffmann
Issues: * Doesn't check pitches correctly in case it is negative. * Doesn't check width at all. Turn macro into functions while being at it, also factor out the check for one region which we then can simply call twice for src + dst. This is CVE-2014-8106. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-28Fix for crash after migration in virtio-rng on bi-endian targetsDavid Gibson
VirtIO devices now remember which endianness they're operating in in order to support targets which may have guests of either endianness, such as powerpc. This endianness state is transferred in a subsection of the virtio device's information. With virtio-rng this can lead to an abort after a loadvm hitting the assert() in virtio_is_big_endian(). This can be reproduced by doing a migrate and load from file on a bi-endian target with a virtio-rng device. The actual guest state isn't particularly important to triggering this. The cause is that virtio_rng_load_device() calls virtio_rng_process() which accesses the ring and thus needs the endianness. However, virtio_rng_process() is called via virtio_load() before it loads the subsections. Essentially the ->load callback in VirtioDeviceClass should only be used for actually reading the device state from the stream, not for post-load re-initialization. This patch fixes the bug by moving the virtio_rng_process() after the call to virtio_load(). Better yet would be to convert virtio to use vmsd and have the virtio_rng_process() as a post_load callback, but that's a bigger project for another day. This is bugfix, and should be considered for the 2.2 branch. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Message-id: 1417067290-20715-1-git-send-email-david@gibson.dropbear.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-28virtio-net: fix unmap leakJason Wang
virtio_net_handle_ctrl() and other functions that process control vq request call iov_discard_front() which will shorten the iov. This will lead unmapping in virtqueue_push() leaks mapping. Fixes this by keeping the original iov untouched and using a temp variable in those functions. Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-27hmp: fix regression of HMP device_del auto-completionMarcel Apfelbaum
The commits: - 6a1fa9f5 (monitor: add del completion for peripheral device) - 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper) cause a QEMU crash when trying to use HMP device_del auto-completion. It can be easily reproduced by: <qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet (qemu) device_del /home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device Aborted (core dumped) The root cause is qdev_build_hotpluggable_device_list going recursively over all peripherals and their children assuming all are devices. It doesn't work since PCI devices have at least on child which is a memory region (bus master). Solved by observing that all devices appear as direct children of /machine/peripheral container. No need of going recursively over all the children. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reported-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-27qemu-timer: Avoid overflows when converting timeout to struct timespecPeter Maydell
In qemu_poll_ns(), when we convert an int64_t nanosecond timeout into a struct timespec, we may accidentally run into overflow problems if the timeout is very long. This happens because the tv_sec field is a time_t, which is signed, so we might end up setting it to a negative value by mistake. This will result in what was intended to be a near-infinite timeout turning into an instantaneous timeout, and we'll busy loop. Cap the maximum timeout at INT32_MAX seconds (about 68 years) to avoid this problem. This specifically manifested on ARM hosts as an extreme slowdown on guest shutdown (when the guest reprogrammed the PL031 RTC to not generate alarms using a very long timeout) but could happen on other hosts and guests too. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1416939705-1272-1-git-send-email-peter.maydell@linaro.org
2014-11-26Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
The final 2.2 patches from me. # gpg: Signature made Wed 26 Nov 2014 11:12:25 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: s390x/kvm: Fix compile error fw_cfg: fix boot order bug when dynamically modified via QOM -machine vmport=auto: Fix handling of VMWare ioport emulation for xen Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-26s390x/kvm: Fix compile errorChristian Borntraeger
commit a2b257d6212a "memory: expose alignment used for allocating RAM as MemoryRegion API" triggered a compile error on KVM/s390x. Fix the prototype and the implementation of legacy_s390_alloc. Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26fw_cfg: fix boot order bug when dynamically modified via QOMGonglei
When we dynamically modify boot order, the length of boot order will be changed, but we don't update s->files->f[i].size with new length. This casuse seabios read a wrong vale of qemu cfg file about bootorder. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26-machine vmport=auto: Fix handling of VMWare ioport emulation for xenDon Slutz
c/s 9b23cfb76b3a5e9eb5cc899eaf2f46bc46d33ba4 or c/s b154537ad07598377ebf98252fb7d2aff127983b moved the testing of xen_enabled() from pc_init1() to pc_machine_initfn(). xen_enabled() does not return the correct value in pc_machine_initfn(). Changed vmport from a bool to an enum. Added the value "auto" to do the old way. Move check of xen_enabled() back to pc_init1(). Acked-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-25Update version for v2.2.0-rc3 releasev2.2.0-rc3Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-25input: move input-send-event into experimental namespaceGerd Hoffmann
Ongoing discussions on how we are going to specify the console, so tag the command as experiental so we can refine things in the 2.3 development cycle. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com [Spell out "not a stable API", and x- the QAPI schema, too] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-24Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, misc bugfixes A bunch of bugfixes for 2.2. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 24 Nov 2014 18:59:47 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: pc: acpi: mark all possible CPUs as enabled in SRAT pcie: fix improper use of negative value pcie: fix typo in pcie_cap_deverr_init() target-i386: move generic memory hotplug methods to DSDTs acpi-build: mark RAM dirty on table update hw/pci: fix crash on shpc error flow pc: count in 1Gb hugepage alignment when sizing hotplug-memory container pc: explicitly check maxmem limit when adding DIMM pc: pc-dimm: use backend alignment during address auto allocation pc: align DIMM's address/size by backend's alignment value memory: expose alignment used for allocating RAM as MemoryRegion API pc: limit DIMM address and size to page aligned values pc: make pc_dimm_plug() more readble pc: kvm: check if KVM has free memory slots to avoid abort() qemu-char: fix tcp_get_fds Signed-off-by: Peter Maydell <peter.maydell@linaro.org>