aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-10ide: remove restart_cb callbackPaolo Bonzini
With restarts now handled by ide_restart_cb and the IDEDMAOps.restart_dma() member, remove the old restart_cb callback. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: move restart callback to common codePaolo Bonzini
With BMDMA specific excised from the restart functions, create a HBA-agnostic restart callback to be shared between the different HBAs. Change the callback registered with the vmstate_change handler to always point to ide_restart_cb instead of relying on the IDEDMAOps.restart_cb() member. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: pass IDEBus to the restart_cbPaolo Bonzini
Pass the containing IDEBus to the restart_cb instead of the more specific BMDMAState child. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: do not use BMDMA in restart callbackPaolo Bonzini
Whenever an error stops the VM, ide_handle_rw_error does "s->bus->dma->unit = s->unit". So we can just use idebus_active_if. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: introduce ide_register_restart_cbPaolo Bonzini
A helper is added that registers the IDEDMAOp .restart_cb() via qemu_add_vm_change_state_handler instead of requiring each HBA to register the callback themselves. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: prepare to move restart to common codePaolo Bonzini
This patch adds the restart_dma callback and adjusts the ide_restart_dma function to utilize this callback to call the BMDMA-specific restart code instead of statically executing BMDMA-specific code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10ide: start extracting ide_restart_dma out of bmdma_restart_dmaPaolo Bonzini
This patch begins refactoring the restart dma functions out of bmdma to be shared with AHCI and other future IDE HBA implementations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10BlockConf: Call backend functions to detect geometry and blocksizesEkaterina Tumanova
geometry: hd_geometry_guess function autodetects the drive geometry. This patch adds a block backend call, that probes the backing device geometry. If the inner driver method is implemented and succeeds (currently only for DASDs), the blkconf_geometry will pass-through the backing device geometry. Otherwise will fallback to old logic. blocksize: This patch initializes blocksize properties to 0. In order to set the property a blkconf_blocksizes was introduced. If user didn't set physical or logical blocksize, it will retrieve its value from a driver (only succeeds for DASD), otherwise it will set default 512 value. The blkconf_blocksizes call was added to all users of BlkConf. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block-backend: Add wrappers for blocksizes and geometry probingEkaterina Tumanova
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-5-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block: Add driver methods to probe blocksizes and geometryEkaterina Tumanova
Introduce driver methods of defining disk blocksizes (physical and logical) and hard drive geometry. Methods are only implemented for "host_device". For "raw" devices driver calls child's method. For now geometry detection will only work for DASD devices. To check that a local check_for_dasd function was introduced. It calls BIODASDINFO2 ioctl and returns its rc. Blocksizes detection function will probe sizes for DASD devices. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-4-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10raw-posix: Factor block size detection out of raw_probe_alignment()Ekaterina Tumanova
Put it in new probe_logical_blocksize(). Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-3-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10block: add bdrv functions for geometry and blocksizeEkaterina Tumanova
Add driver functions for geometry and blocksize detection Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424087278-49393-2-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10blkdebug: fix "once" ruleJohn Snow
Background: The blkdebug scripts are currently engineered so that when a debug event occurs, a prefilter browses a master list of parsed rules for a certain event and adds them to an "active list" of rules to be used for the forthcoming action, provided the events and state numbers match. Then, once the request is received, the last active rule is used to inject an error if certain parameters match. This active list is cleared every time the prefilter injects a new rule for the first time during a debug event. The "once" rule currently causes the error injection, if it is triggered, to only clear the active list. This is insufficient for preventing future injections of the same rule. Remedy: This patch /deletes/ the rule from the list that the prefilter browses, so it is gone for good. In V2, we remove only the rule of interest from the active list instead of allowing the "once" rule to clear the entire list of active rules. Impact: This affects iotests 026. Several ENOSPC tests that used "once" can be seen to have output that shows multiple failure messages. After this patch, the error messages tend to be smaller and less severe, but the injection can still be seen to be working. I have patched the expected output to expect the smaller error messages. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: Add test for different refcount widthsMax Reitz
Add a test for errors specific to certain widths (i.e. snapshots with refcount_bits=1). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Allow creation with refcount order != 4Max Reitz
Add a creation option to qcow2 for setting the refcount order of images to be created, and respect that option's value. This breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10iotests: Prepare for refcount_bits optionMax Reitz
Some tests do not work well with certain refcount widths (i.e. you cannot create internal snapshots with refcount_bits=1), so make those widths unsupported. Furthermore, add another filter to _filter_img_create in common.filter which filters out the refcount_bits value. This is necessary for test 079, which does actually work with any refcount width, but invoking qemu-img directly leads to the refcount_bits value being visible in the output; use _make_test_img instead which will filter it out. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Use symbolic macros in qcow2_amend_optionsMax Reitz
qcow2_amend_options() should not compare options against some inline strings but rather use the symbolic macros available for each of the creation options. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: refcount_order parameter for qcow2_create2Max Reitz
Add a refcount_order parameter to qcow2_create2(), use that value for the image header and for calculating the size required for preallocation. For now, always pass 4. This addition requires changes to the calculation of the file size for the "full" and "falloc" preallocation modes. That in turn is a nice opportunity to add a comment about that calculation not necessarily being exact (and that being intentional). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Open images with refcount order != 4Max Reitz
No longer refuse to open images with a different refcount entry width than 16 bits; only reject images with a refcount width larger than 64 bits (which is prohibited by the specification). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: More helpers for refcount modificationMax Reitz
Add helper functions for getting and setting refcounts in a refcount array for any possible refcount order, and choose the correct one during refcount initialization. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Helper function for refcount modificationMax Reitz
Since refcounts do not always have to be a uint16_t, all refcount blocks and arrays in memory should not have a specific type (thus they become pointers to void) and for accessing them, two helper functions are used (a getter and a setter). Those functions are called indirectly through function pointers in the BDRVQcowState so they may later be exchanged for different refcount orders. With the check and repair functions using this function, the refcount array they are creating will be in big endian byte order; additionally, using realloc_refcount_array() makes the size of this refcount array always cluster-aligned. Both combined allow rebuild_refcount_structure() to drop the bounce buffer which was used to convert parts of the refcount array to big endian byte order and store them on disk. Instead, those parts can now be written directly. [ kwolf: Fixed a build failure on 32 bit and another with old glib ] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Helper for refcount array reallocationMax Reitz
Add a helper function for reallocating a refcount array, independent of the refcount order. The newly allocated space is zeroed and the function handles failed reallocations gracefully. The helper function will always align the buffer size to a cluster boundary; if storing the refcounts in such an array in big endian byte order, this makes it possible to write parts of the array directly as refcount blocks into the image file. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Use 64 bits for refcount valuesMax Reitz
Refcounts may have a width of up to 64 bits, so qemu should use the same width to represent refcount values internally. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Use unsigned addend for update_refcount()Max Reitz
update_refcount() and qcow2_update_cluster_refcount() currently take a signed addend. At least one caller passes a value directly derived from an absolute refcount that should be reached ("l2_refcount - 1" in expand_zero_clusters_in_l1()). Therefore, the addend should be unsigned as well; this will be especially important for 64 bit refcounts. Because update_refcount() then no longer knows whether the refcount should be increased or decreased, it now requires an additional flag which specified exactly that. The same applies to qcow2_update_cluster_refcount(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Only return status from qcow2_get_refcountMax Reitz
Refcounts can theoretically be of type uint64_t; in order to be able to represent the full range, qcow2_get_refcount() cannot use a single variable to represent both all refcount values and also keep some values reserved for errors. One solution would be to add an Error pointer parameter to qcow2_get_refcount(); however, no caller could (currently) pass that error message, so it would have to be emitted immediately and be passed to the next caller by returning -EIO or something similar. Therefore, an Error parameter does not offer any advantages here. The solution applied by this patch is simpler to use. Because no caller would be able to pass the error message, they would have to print it and free it, whereas with this patch the caller only needs to pass the returned integer (which is often a no-op from the code perspective, because that integer will be stored in a variable "ret" which will be returned by the fail path of many callers). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Do not return new value after refcount updateMax Reitz
qcow2_update_cluster_refcount() does not have any quick access to the new refcount value, it has to call qcow2_get_refcount(). Some callers do not need that new value at all, others call qcow2_get_refcount() themselves anyway (albeit in a different code path, which can however be easily changed), therefore there is no advantage in making qcow2_update_cluster_refcount() return the new value. Drop it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Add refcount_bits to format-specific infoMax Reitz
Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Add two new fields to BDRVQcowStateMax Reitz
Add two new fields regarding refcount information (the bit width of every entry and the maximum refcount value) to the BDRVQcowState. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Add virtio MMIO supportMarc Marí
Add virtio MMIO support. Add virtio-blk-test MMIO test case. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-6-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Add malloc genericMarc Marí
This malloc is a basic interface implementation that works for any platform. It should be replaced in the future for a real malloc implementation for each of the platforms. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-5-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Remove PCI assumptions in constants of virtio driverMarc Marí
Convert PCI-specific constants names of libqos virtio driver. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10tests: Prepare virtio-blk-test for multi-arch implementationMarc Marí
Modularize functions in virtio-blk-test and add PCI suffix for PCI specific components. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-3-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10libqos: Change use of pointers to uint64_t in virtioMarc Marí
Convert use of pointers in functions of virtio to uint64_t in order to make it platform-independent. Add casting from pointers (in PCI functions) to uint64_t and vice versa through uintptr_t. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10virtio-blk: Check return value of blk_aio_ioctlFam Zheng
Since commit 1dc936aa84 (virtio-blk: Use blk_aio_ioctl) we silently lose the request if blk_aio_ioctl returns NULL (not implemented). Fix it by directly returning VIRTIO_BLK_S_UNSUPP as we used to do. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [ kwolf: Fixed build error on win32 ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-09qcow2: Remove unused struct QCowCreateStateKevin Wolf
The only user went away five years ago with commit a9420734 ('qcow2: Simplify image creation'). It's about time to remove it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-09block/raw-posix: fix compilation warning on OSXDenis V. Lunev
block/raw-posix.c:947:19: warning: unused variable 's' [-Wunused-variable] BDRVRawState *s = aiocb->bs->opaque; This variable is used only when on of the following macros are defined CONFIG_XFS, CONFIG_FALLOCATE, CONFIG_FALLOCATE_PUNCH_HOLE or CONFIG_FALLOCATE_ZERO_RANGE. Fortunately, CONFIG_FALLOCATE_PUNCH_HOLE and CONFIG_FALLOCATE_ZERO_RANGE could be defined only along with CONFIG_FALLOCATE. Therefore checking for CONFIG_XFS or CONFIG_FALLOCATE would be enough. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Peter Maydell <peter.maydell@linaro.org> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-09sheepdog: selectable object size supportTeruaki Ishizaki
Previously, qemu block driver of sheepdog used hard-coded VDI object size. This patch enables users to handle VDI object size. When you start qemu, you don't need to specify additional command option. But when you create the VDI which doesn't have default object size with qemu-img command, you specify object_size option. If you want to create a VDI of 8MB object size, you need to specify following command option. # qemu-img create -o object_size=8M sheepdog:test1 100M In addition, when you don't specify qemu-img command option, a default value of sheepdog cluster is used for creating VDI. # qemu-img create sheepdog:test2 100M Signed-off-by: Teruaki Ishizaki <ishizaki.teruaki@lab.ntt.co.jp> Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-09vpc: Implement bdrv_co_get_block_status()Kevin Wolf
This implements bdrv_co_get_block_status() for VHD images. This can significantly speed up qemu-img convert operation because only with this function implemented sparseness can be considered. (Before, converting a 1 TB empty image took several minutes for me, now it's instantaneous.) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-03-09vpc: Fix size in fixed image creationKevin Wolf
If total_sectors is rounded to match the geometry, total_size needs to be changed as well. Otherwise we end up with an image whose geometry describes a disk larger than the image file, which doesn't end well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-03-09test-coroutine: Regression test for yield bugStefan Hajnoczi
This adds a test for reentering a coroutine that previously yielded to a coroutine that has meanwhile terminated. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-09coroutine: Clean up qemu_coroutine_enter()Kevin Wolf
qemu_coroutine_enter() is now the only user of coroutine_swap(). Both functions are short, so inline it. Also, using COROUTINE_YIELD is now even more confusing because this code is never called during qemu_coroutine_yield() any more. In fact, this value is never read back, so we can just introduce a new COROUTINE_ENTER which documents the purpose of the task switch better. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-09coroutine: Fix use after free with qemu_coroutine_yield()Kevin Wolf
Instead of using the same function for entering and exiting coroutines, and hoping that it doesn't add any functionality that hurts with the parameters used for exiting, we can just directly call into the real task switch in qemu_coroutine_switch(). This fixes a use-after-free scenario where reentering a coroutine that has yielded still accesses the old parent coroutine (which may have meanwhile terminated) in the part of coroutine_swap() that follows qemu_coroutine_switch(). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-08Merge remote-tracking branch 'remotes/xtensa/tags/20150307-xtensa' into stagingPeter Maydell
Xtensa updates: - implement do_unassigned_access callback; - fix ML605 xtfpga FLASH size. # gpg: Signature made Sat Mar 7 12:35:05 2015 GMT using RSA key ID F83FA044 # gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>" # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" * remotes/xtensa/tags/20150307-xtensa: target-xtensa: xtfpga: fix ml605 flash size target-xtensa: implement do_unassigned_access callback hw/xtensa: allow reads/writes in the system I/O region Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: docs: add memory-hotplug.txt qemu-options.hx: improve -m description virtio-balloon: Add some trace events virtio-balloon: Fix balloon not working correctly when hotplug memory pc-dimm: add a function to calculate VM's current RAM size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150304-1' into ↵Peter Maydell
staging misc spice/qxl fixes. # gpg: Signature made Wed Mar 4 13:57:42 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20150304-1: hmp: info spice: take out webdav hmp: info spice: Show string channel name qxl: drop update_displaychangelistener call for secondary qxl devices vga: refactor vram_size clamping and rounding qxl: refactor rounding up to a nearest power of 2 spice: fix invalid memory access to vga.vram qxl: document minimal video memory for new modes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150303-1' into ↵Peter Maydell
staging xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set # gpg: Signature made Tue Mar 3 07:38:43 2015 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20150303-1: xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08Merge remote-tracking branch 'remotes/gonglei/tags/bootdevice-next-20150303' ↵Peter Maydell
into staging bootdevice: bug fixes # gpg: Signature made Tue Mar 3 05:18:39 2015 GMT using RSA key ID DDE30FBB # gpg: Good signature from "Gonglei <arei.gonglei@huawei.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5178 9C82 617F 2F58 8693 63B1 BA7A 65B0 DDE3 0FBB * remotes/gonglei/tags/bootdevice-next-20150303: bootdevice: add check in restore_boot_order() bootdevice: check boot order argument validation before vm running Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/bkoppelmann/tags/pull-tricore-20150303' into staging TriCore RRR1, RRR2 instructions and bugfixes # gpg: Signature made Tue Mar 3 01:12:02 2015 GMT using RSA key ID 6B69CA14 # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" * remotes/bkoppelmann/tags/pull-tricore-20150303: target-tricore: Add instructions of RRR1 opcode format, which have 0xc3 as first opcode target-tricore: Add instructions of RRR1 opcode format, which have 0x43 as first opcode target-tricore: Add instructions of RRR1 opcode format, which have 0x83 as first opcode target-tricore: Add instructions of RRR2 opcode format target-tricore: fix msub32_suov return wrong results target-tricore: Fix RLC_ADDI, RLC_ADDIH using wrong microcode helper Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-07target-xtensa: xtfpga: fix ml605 flash sizeMax Filippov
ML605 daughterboard has 16MB flash, not 32MB. Change board definition accordingly. Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2015-03-07target-xtensa: implement do_unassigned_access callbackMax Filippov
Depending on access type raise either InstrPIFDataError or LoadStorePIFDataError exception. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 03:14:34 +0000