aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-23linux-user: Unlock mmap_lock when resuming guest from page_unprotectAlexander Graf
The page_unprotect() function is running everything locked. Before every potential exit path of the function mmap_unlock() gets called to make sure we don't leak the lock. However, the function calls tb_invalidate_phys_page() which again can exit a signal through longjmp, leaving our mmap_unlock() attempts in vain. Add a hint to tb_invalidate_phys_page() that we need to unlock before we can leave back into guest context, so that we don't leak the lock. This fixes 16-bit i386 wine programs running in linux-user for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Reset copied CPUs in cpu_copy() alwaysAlexander Graf
When a new thread gets created, we need to reset non arch specific state to get the new CPU into clean state. However this reset should happen before the arch specific CPU contents get copied over. Otherwise we end up having clean reset state in our newly created thread. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix epoll on ARM hostsAlexander Graf
The epoll emulation uses data structures without packing them, so the compiler might choose to add padding inside. This patch makes the most offending one (target_epoll_event) a packed structure to make sure we don't pad it by accident. ARM would pad it, so declare the padding mandatory for ARM targets. This fixes i386-on-ARM epoll emulation for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: fix segmentation fault passing with h2g(x) != xAlexander Graf
When forwarding a segmentation fault into the guest process, we were passing the host's address directly into the guest process's signal descriptor. That obviously confused the guest process, since it didn't know what to make of the (usually 32-bit truncated) address. Passing in h2g(address) makes the guest process a lot happier. To make the code more obvious, introduce a h2g_nocheck() macro that does the same as h2g(), but allows us to convert addresses that may be outside of guest mapped range into the guest's view of address space. This fixes java running in arm-linux-user for me. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix pipe syscall return for SPARCPeter Maydell
SPARC is one of the CPUs which has a funny syscall ABI for the pipe syscall; add it to the set of special cases in do_pipe(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23linux-user: Fix target_stat and target_stat64 for OpenRISCPeter Maydell
OpenRISC uses the asm-generic versions of target_stat and target_stat64, but it was incorrectly using the x86/ARM/etc version due to a misplaced defined(TARGET_OPENRISC). The previously unused OpenRISC section of the ifdef ladder also defined an incorrect target_stat and omitted the target_stat64 definition. Fix target_stat, provide target_stat64, and add a comment noting that these are the asm-generic versions for the benefit of future ports. Reviewed-by: Jia Liu <proljc@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Avoid conditional cpu_reset()Andreas Färber
Some CPUs reset as part of cpu_init(), some others were reset afterwards, some not at all. While some targets didn't implement a cpu_[state_]reset() function, QOM cpu_reset() is always available. There's nothing wrong with resetting twice on startup, so drop the #ifdef. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Make NPTL non-optionalPeter Maydell
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for x86-64Peter Maydell
Add x86-64 implementation of cpu_set_tls() (like the kernel, we just have to call do_arch_prctl() to set FS); this allows us to enable NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add i386 TLS setterAlexander Graf
We can easily set the TLS on i386. Add code to do so. Signed-off-by: Alexander Graf <agraf@suse.de> [PMM: also remove "target_nptl=no" line from configure, for consistency with other patches in this series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add missing 'break' in i386 get_thread_area syscallPeter Maydell
The i386 code for the get_thread_area syscall was missing a 'break' which meant it would have fallen through into the implementation of the following syscall; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for SPARC targetsPeter Maydell
Provide the missing cpu_set_tls(), and resolve the FIXME in cpu_clone_regs() by clearing the carry flag for the child. This allows us to turn on building with NPTL for SPARC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for OpenRISCPeter Maydell
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread() implementation, so a cpu_set_tls() implementation is a no-op. cpu_clone_regs() was setting the syscall return value in the wrong register -- it is gpr[11], not gpr[2]. With these two things fixed, we can compile with NPTL enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Jia Liu <proljc@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Move includes of target-specific headers to end of qemu.hPeter Maydell
The target-specific headers (target_cpu.h and target_signal.h) might need to use the target-independent structure and function definitions of qemu.h; so include them only at the bottom of qemu.h, not the top. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Enable threading for unicore32-linux-userPeter Maydell
unicore32-linux-user provides cpu_set_tls(), so the failure to enable target_nptl was presumably an oversight. Enable it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Enable threading on all ppc and mips linux-user targetsPeter Maydell
Though threading (target_nptl) was enabled on the base PPC and MIPS targets, it wasn't enabled for the variants mipsn32, mipsn32el, mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight). Enable threading consistently on all these targets. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Don't say target_nptl="no" if there is no linux-user targetPeter Maydell
For architectures with no linux-user target, don't claim no NPTL support. This has no behavioural change, but it means that we won't accidentally add a new linux-user target without threading support in future (because attempting to do so would be a compile failure rather than a silent lack of support). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Flip default of target_nptlPeter Maydell
Most targets either (a) support threading or (b) don't have a linux-user/bsd-user target, so make it default to 'yes', with those targets that don't support threading having to specifically say so. This is a mechanical no-behaviour-change commit; some of the "no" entries it adds will be taken out in later patches. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22Merge remote-tracking branch 'pmaydell/tags/pull-arm-devs-20130722' into stagingAnthony Liguori
arm-devs queue # gpg: Signature made Mon 22 Jul 2013 06:38:52 AM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Peter Maydell (8) and Soren Brinkmann (2) # Via Peter Maydell * pmaydell/tags/pull-arm-devs-20130722: hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot header hw/loader: Support ramdisk with u-boot header vexpress: Add virtio-mmio transports vexpress: Make VEDBoardInfo extend arm_boot_info arm/boot: Allow boards to modify the FDT blob virtio: Implement MMIO based virtio transport virtio: Support transports which can specify the vring alignment virtio: Add support for guest setting of queue size arm/boot: Use qemu_devtree_setprop_sized_cells() device_tree: Add qemu_devtree_setprop_sized_cells() utility functions Message-id: 1374493427-3254-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'bonzini/iommu-for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (2) and others # Via Paolo Bonzini * bonzini/iommu-for-anthony: exec: fix incorrect assumptions in memory_access_size memory: Return -1 again on reads from unsigned regions memory: actually set the owner exec.c: Pass correct pointer type to qemu_ram_ptr_length Message-id: 1374264478-23913-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Michael Tokarev (2) and others # Via Michael Tokarev * mjt/trivial-patches: doc: monitor multiplexing rewording block/m25p80: Update Micron entries Fix command example in qemu.sasl slirp: remove mbuf(m_hdr,m_dat) indirection linux-user: declare sys_futex to have 6 arguments Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Peter Lieven (5) and others # Via Stefan Hajnoczi * stefanha/block: block/raw: add .bdrv_get_info block: fix bdrv_read_unthrottled() cpus: Let vm_stop[_force_state]() always flush block devices block-migration: efficiently encode zero blocks block/raw: add bdrv_co_write_zeroes block: add bdrv_write_zeroes() block: fix vvfat error path for enable_write_target QEMUBH: make AioContext's bh re-entrant dataplane: sync virtio.c and vring.c virtqueue state gluster: Add discard support for GlusterFS block driver. gluster: Use pkg-config to configure GlusterFS block driver Message-id: 1374223132-29107-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'rth/axp-next' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/axp-next: pc-bios: Update palcode-clipper target-alpha: Move alarm to vm_clock Message-id: 1374161033-11449-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
# By Markus Armbruster # Via Stefan Hajnoczi * stefanha/tracing: trace-events: Fix up source file comments trace-events: Drop unused events milkymist-minimac2: Fix minimac2_read/_write tracepoints slavio_misc: Fix slavio_led_mem_readw/_writew tracepoints cleanup-trace-events.pl: New Message-id: 1374119369-26496-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-22hw/arm: Use 'load_ramdisk()' for loading ramdisks w/ U-Boot headerSoren Brinkmann
The load_ramdisk function is used to load ramdisk featuring a U-Boot header. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373323202-17083-3-git-send-email-soren.brinkmann@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-22hw/loader: Support ramdisk with u-boot headerSoren Brinkmann
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks with a u-boot header. To enable this and leverage synergies 'load_uimage()' is refactored to accomodate this additional use case. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-19vexpress: Add virtio-mmio transportsPeter Maydell
Add some virtio-mmio transports to the vexpress board model, together with a modify_dtb hook which adds them to the device tree so that the kernel will probe for them. We put them in a reserved area of the address map. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-9-git-send-email-peter.maydell@linaro.org
2013-07-19vexpress: Make VEDBoardInfo extend arm_boot_infoPeter Maydell
Make the VEDBoardInfo struct extend arm_boot_info; this will allow us to get at the VEDBoardInfo information inside callbacks from arm/boot code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-8-git-send-email-peter.maydell@linaro.org
2013-07-19arm/boot: Allow boards to modify the FDT blobPeter Maydell
Add a callback hook in arm_boot_info to allow board models to modify the device tree blob if they need to. (The major expected use case is to add virtio-mmio nodes for virtio-mmio transports that exist in QEMU but not in the hardware.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-7-git-send-email-peter.maydell@linaro.org
2013-07-19virtio: Implement MMIO based virtio transportPeter Maydell
Add support for the generic MMIO based virtio transport. This patch includes some fixes for bugs spotted by Ying-Shiuan Pan <yspan@itri.org.tw>. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org [Fred changes: updated to new virtio-bus mechanisms] Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> [PMM changes: * fixed trivial makefile conflict * removed unused int_enable * host_features doesn't need migrating * reset guest accessible state in the reset function * minor style fixes like extra blank lines * RAZ/WI if there's no backend * made transport size 0x200, in line with kvmtool * set has_variable_vring_alignment ]
2013-07-19virtio: Support transports which can specify the vring alignmentPeter Maydell
Support virtio transports which can specify the vring alignment (ie where the guest communicates this to the host) by providing a new virtio_queue_set_align() function. (The default alignment remains as before.) Transports which wish to make use of this must set the has_variable_vring_alignment field in their VirtioBusClass struct to true; they can then change the alignment via virtio_queue_set_align(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-5-git-send-email-peter.maydell@linaro.org
2013-07-19virtio: Add support for guest setting of queue sizePeter Maydell
The MMIO virtio transport spec allows the guest to tell the host how large the queue size is. Add virtio_queue_set_num() function which implements this in the QEMU common virtio support code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1373977512-28932-4-git-send-email-peter.maydell@linaro.org
2013-07-19arm/boot: Use qemu_devtree_setprop_sized_cells()Peter Maydell
Replace the opencoded assembly of the reg property array for the /memory node with a call to qemu_devtree_setprop_sized_cells(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1373977512-28932-3-git-send-email-peter.maydell@linaro.org
2013-07-19device_tree: Add qemu_devtree_setprop_sized_cells() utility functionsPeter Maydell
We already have a qemu_devtree_setprop_cells() which sets a dtb property to an array of cells whose values are specified by varargs. However for the fairly common case of setting a property to a list of addresses or of address,size pairs the number of cells used by each element in the list depends on the parent's #address-cells and #size-cells properties. To make this easier we provide an analogous qemu_devtree_setprop_sized_cells() macro which allows the number of cells used by each element to be specified. This is implemented using an underlying qemu_devtree_setprop_sized_cells_from_array() function which takes the values and sizes as an array; this may also be directly useful for cases where the cell contents are constructed programmatically. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1373977512-28932-2-git-send-email-peter.maydell@linaro.org
2013-07-19doc: monitor multiplexing rewordingMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19block/m25p80: Update Micron entriesEd Maste
- Split 32Mb and 256Mb parts into a11 and a13 variants. - Add the 4K sector flag to the 128Mb parts. (These entries were taken from the Linux kernel list, which is missing the flag.) - Fill out the table of sizes with entries for 64Mb parts. Prodded by Peter Crosthwaite. Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19Fix command example in qemu.saslCole Robinson
sasldblistusers2 doesn't have a '-a' option Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19slirp: remove mbuf(m_hdr,m_dat) indirectionMichael Tokarev
2013-07-19linux-user: declare sys_futex to have 6 argumentsPetar Jovanovic
sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect declaration in the mips_syscall_args array. This change fixes the cases where the 5th and 6th arguments have non-zero value and have importance. An example is a Linux implementation of pthread_cond_wait() function. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19block/raw: add .bdrv_get_infoPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19block: fix bdrv_read_unthrottled()Peter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19cpus: Let vm_stop[_force_state]() always flush block devicesKevin Wolf
Even if the VM is already stopped, we cannot assume that all data has already been successfully flushed to disk. The flush during the previous vm_stop() could have failed. Run bdrv_flush_all() unconditionally so that we get an error each time if the block device isn't really flushed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19block-migration: efficiently encode zero blocksPeter Lieven
this patch adds a efficient encoding for zero blocks by adding a new flag indicating a block is completely zero. additionally bdrv_write_zeros() is used at the destination to efficiently write these zeroes. depending on the implementation this avoids that the destination target gets fully provisioned. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19block/raw: add bdrv_co_write_zeroesPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19block: add bdrv_write_zeroes()Peter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19block: fix vvfat error path for enable_write_targetFam Zheng
s->qcow and s->qcow_filename are allocated but not freed on error. Fix the possible leaks, remove unnecessary check for bdrv_new(), propagate ret code of bdrv_create() and also the one of enable_write_target(). Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19QEMUBH: make AioContext's bh re-entrantLiu Ping Fan
BH will be used outside big lock, so introduce lock to protect between the writers, ie, bh's adders and deleter. The lock only affects the writers and bh's callback does not take this extra lock. Note that for the same AioContext, aio_bh_poll() can not run in parallel yet. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19dataplane: sync virtio.c and vring.c virtqueue stateStefan Hajnoczi
Load the virtio.c state into vring.c when we start dataplane mode and vice versa when stopping dataplane mode. This patch makes it possible to start and stop dataplane any time while the guest is running. This will eventually allow us to go back to QEMU main loop for bdrv_drain_all() and live migration. In the meantime, this patch makes the dataplane lifecycle more robust but should make no visible difference. It may be useful in the virtio-net dataplane effort. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 11:51:39 +0000