aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-23acpi/gpex: Fix cca attribute check for pxb deviceXingang Wang
When check DMA support for device attached to pxb, the cache coherency attribute need to be set. This add _CCA attribute for pxb DSDT. Fixes: 6f9765fbad ("acpi/gpex: Build tables for pxb") Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1612490205-48788-3-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2021-02-23acpi: Allow pxb DSDT acpi table changesXingang Wang
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1612490205-48788-2-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2021-02-23pcie: don't set link state active if the slot is emptyLaurent Vivier
When the pcie slot is initialized, by default PCI_EXP_LNKSTA_DLLLA (Data Link Layer Link Active) is set in PCI_EXP_LNKSTA (Link Status) without checking if the slot is empty or not. This is confusing for the kernel because as it sees the link is up it tries to read the vendor ID and fails: (From https://bugzilla.kernel.org/show_bug.cgi?id=211691) [ 1.661105] pcieport 0000:00:02.2: pciehp: Slot Capabilities : 0x0002007b [ 1.661115] pcieport 0000:00:02.2: pciehp: Slot Status : 0x0010 [ 1.661123] pcieport 0000:00:02.2: pciehp: Slot Control : 0x07c0 [ 1.661138] pcieport 0000:00:02.2: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+ [ 1.662581] pcieport 0000:00:02.2: pciehp: pciehp_get_power_status: SLOTCTRL 6c value read 7c0 [ 1.662597] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662703] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0010 from Slot Status [ 1.662706] pcieport 0000:00:02.2: pciehp: pcie_enable_notification: SLOTCTRL 6c write cmd 1031 [ 1.662730] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662748] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662750] pcieport 0000:00:02.2: pciehp: Slot(0-2): Link Up [ 2.896132] pcieport 0000:00:02.2: pciehp: pciehp_check_link_status: lnk_status = 2204 [ 2.896135] pcieport 0000:00:02.2: pciehp: Slot(0-2): No device found [ 2.896900] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0010 from Slot Status [ 2.896903] pcieport 0000:00:02.2: pciehp: pciehp_power_off_slot: SLOTCTRL 6c write cmd 400 [ 3.656901] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0009 from Slot Status This is really a problem with virtio-net failover that hotplugs a VFIO card during the boot process. The kernel can shutdown the slot while QEMU is hotplugging it, and this likely ends by an automatic unplug of the card. At the end of the boot sequence the card has disappeared. To fix that, don't set the "Link Active" state in the init function, but rely on the plug function to do it, as the mechanism has already been introduced by 2f2b18f60bf1. Fixes: 2f2b18f60bf1 ("pcie: set link state inactive/active after hot unplug/plug") Cc: zhengxiang9@huawei.com Fixes: 3d67447fe7c2 ("pcie: Fill PCIESlot link fields to support higher speeds and widths") Cc: alex.williamson@redhat.com Fixes: b2101eae63ea ("pcie: Set the "link active" in the link status register") Cc: benh@kernel.crashing.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-5-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23failover: really display a warning when the primary device is not foundLaurent Vivier
In failover_add_primary(), we search the id of the failover device by scanning the list of the devices in the opts list to find a device with a failover_pair_id equals to the id of the virtio-net device. If the failover_pair_id is not found, QEMU ignores the primary device silently (which also means it will not be hidden and it will be enabled directly at boot). After that, we search the id in the opts list to do a qdev_device_add() with it. The device will be always found as otherwise we had exited before, and thus the warning is never displayed. Fix that by moving the error report to the first exit condition. Also add a g_assert() to be sure the compiler will not complain about a possibly NULL pointer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-4-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23virtio-net: add missing object_unref()Laurent Vivier
failover_add_primary() calls qdev_device_add() and doesn't unref the device. Because of that, when the device is unplugged a reference is remaining and prevents the cleanup of the object. This prevents to be able to plugin back the failover primary device, with errors like: (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev0,bus=root.3,failover_pair_id=net0 (qemu) device_del hostdev0 We can check with "info qtree" and "info pci" that the device has been removed, and then: (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev1,bus=root.3,failover_pair_id=net0 Error: vfio 0000:41:00.0: device is already attached (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev0,bus=root.3,failover_pair_id=net0 qemu-kvm: Duplicate ID 'hostdev0' for device Fixes: 21e8709b29cd ("failover: Remove primary_dev member") Cc: quintela@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-3-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
2021-02-23pci: cleanup failover sanity checkLaurent Vivier
Commit a1190ab628 has added a "allow_unplug_during_migration = true" at the end of the main "if" block, so it is not needed to set it anymore in the previous checking. Remove it, to have only sub-ifs that check for needed conditions and exit if one fails. Fixes: 4f5b6a05a4e7 ("pci: add option for net failover") Fixes: a1190ab628c0 ("migration: allow unplug during migration for failover devices") Cc: jfreimann@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-2-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-02-22Merge remote-tracking branch ↵Peter Maydell
'remotes/edgar/tags/edgar/cris-next-2021-02-22.for-upstream' into staging CRIS PR 2021-02-22 v1 # gpg: Signature made Mon 22 Feb 2021 08:28:37 GMT # gpg: using RSA key AC44FEDC14F7F1EBEDBF415129C596780F6BCA83 # gpg: Good signature from "Edgar E. Iglesias (Xilinx key) <edgar.iglesias@xilinx.com>" [unknown] # gpg: aka "Edgar E. Iglesias <edgar.iglesias@gmail.com>" [full] # Primary key fingerprint: AC44 FEDC 14F7 F1EB EDBF 4151 29C5 9678 0F6B CA83 * remotes/edgar/tags/edgar/cris-next-2021-02-22.for-upstream: target/cris: Plug leakage of TCG temporaries target/cris: Let cris_mmu_translate() use MMUAccessType access_type target/cris: Use MMUAccessType enum type when possible Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-22target/cris: Plug leakage of TCG temporariesStefan Sandstrom
Add and fix deallocation of temporary TCG registers in CRIS code generation. Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Change-Id: I17fce5d95bdc4418337ba885d53ba97afb1bafcc Signed-off-by: Stefan Sandström <stefans@axis.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210219124416.28178-1-stefans@axis.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-02-22target/cris: Let cris_mmu_translate() use MMUAccessType access_typePhilippe Mathieu-Daudé
All callers of cris_mmu_translate() provide a MMUAccessType type. Let the prototype use it as argument, as it is stricter than an integer. We can remove the documentation as enum names are self explicit. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20210128003223.3561108-3-f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-02-22target/cris: Use MMUAccessType enum type when possiblePhilippe Mathieu-Daudé
Replace the 0/1/2 magic values by the corresponding MMUAccessType. We can remove a comment as enum names are self explicit. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20210128003223.3561108-2-f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-02-21Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into ↵Peter Maydell
staging MIPS patches queue - Drop redundant struct MemmapEntry (Bin) - Fix for Coverity CID 1438965 and 1438967 (Jiaxun) - Add MIPS bootloader API (Jiaxun) - Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun) - Add PMON test for Loongson-3A1000 CPU (Jiaxun) - Convert to translator API (Philippe) - MMU cleanups (Philippe) - Promote 128-bit multimedia registers as global ones (Philippe) - Various cleanups/fixes on the VT82C686B southbridge (Zoltan) # gpg: Signature made Sun 21 Feb 2021 18:43:57 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-20210221: (43 commits) vt82c686: Fix superio_cfg_{read,write}() functions vt82c686: Log superio_cfg unimplemented accesses vt82c686: Simplify by returning earlier vt82c686: Reduce indentation by returning early vt82c686: Remove index field of SuperIOConfig vt82c686: Move creation of ISA devices to the ISA bridge vt82c686: Simplify vt82c686b_realize() vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it vt82c686: Set user_creatable=false for VT82C686B_PM vt82c686: Fix up power management io base and config vt82c686: Correctly reset all registers to default values on reset vt82c686: Correct vt82c686-pm I/O size vt82c686: Make vt82c686-pm an I/O tracing region vt82c686: Fix SMBus IO base and configuration registers vt82c686: Reorganise code vt82c686: Move superio memory region to SuperIOConfig struct target/mips: Use GPR move functions in gen_HILO1_tx79() target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpers target/mips: Rename 128-bit upper halve GPR registers target/mips: Promote 128-bit multimedia registers as global ones ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-21vt82c686: Fix superio_cfg_{read,write}() functionsBALATON Zoltan
These functions are memory region callbacks so we have to check against relative address not the mapped address. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <15b2968fd300a12d06b42368d084f6f80d3c3be5.1610223397.git.balaton@eik.bme.hu> [PMD: Split original patch in 5, this is part 5/5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Log superio_cfg unimplemented accessesBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <15b2968fd300a12d06b42368d084f6f80d3c3be5.1610223397.git.balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Split original patch in 5, this is part 4/5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Simplify by returning earlierBALATON Zoltan
By returning earlier we can remove the 'can_write' boolean variable. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <15b2968fd300a12d06b42368d084f6f80d3c3be5.1610223397.git.balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Split original patch in 5, this is part 3/5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Reduce indentation by returning earlyBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <15b2968fd300a12d06b42368d084f6f80d3c3be5.1610223397.git.balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Split patch original in 5, this is part 2/5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Remove index field of SuperIOConfigBALATON Zoltan
Remove the separate index value from SuperIOConfig and store the index at reg 0 which is reserved and returns 0 on read. This simplifies the object state. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <15b2968fd300a12d06b42368d084f6f80d3c3be5.1610223397.git.balaton@eik.bme.hu> [PMD: Split original patch in 5, this is part 1/5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Move creation of ISA devices to the ISA bridgeBALATON Zoltan
Currently the ISA devices that are part of the VIA south bridge, superio chip are wired up by board code. Move creation of these ISA devices to the VIA ISA bridge model so that board code does not need to access ISA bus. This also allows vt82c686b-superio to be made internal to vt82c686 which allows implementing its configuration via registers in subseqent commits. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <bf9400cc8e4ddd3129aa5678de4d3cf38384805f.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Simplify vt82c686b_realize()BALATON Zoltan
Remove unneeded variables and setting value to 0 on zero initialised data and replace check for error with error_fatal. Rationalise loop that sets PCI config header fields read only. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <e4caf35ca10a68f5c74ae3f93fa0bcfa9457beea.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on itBALATON Zoltan
The vt82c686b-pm model can be shared between VT82C686B and VT8231. The only difference between the two is the device id in what we emulate so make an abstract via-pm model by renaming appropriately and add types for vt82c686b-pm and vt8231-pm based on it. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <34969fc7be984fa070479bfb9f748993a0aef31b.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Set user_creatable=false for VT82C686B_PMBALATON Zoltan
This device is part of the multifunction VIA superio/south bridge chip so not useful in itself. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <d0a806fed5e8055aee4fcf5b2f4790e6dd0f9dc6.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Fix up power management io base and configBALATON Zoltan
Similar to the SMBus io registers there is a power management io range that is set via similar base address reg and enable bit. Some handling of this was already there but with several problems: using the wrong registers and bits, wrong size range, not acually updating mapping and handling reset correctly, nor emulating any of the actual io registers. Some of these errors are fixed up here. After this patch we use the correct base address register, enable bit and region size and allow guests to map/unmap this region, but we still don't emulate any of the registers in this range. PMD notes regarding the Configuration Space Power Management Registers: - 0x40 General Configuration 0 - 0x41 General Configuration 1 . Bit 7: I/O Enable for ACPI I/O Base - 0x48 Power Mgmt I/O Base . Bit 0: Always set . Bits 7-15: Power Management I/O Register Base Address (this explains the change 0xffc0 -> 0xff80) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <cff9b2442d3e2e1cfbdcbc2dfbb559031b4b1cc1.1610223397.git.balaton@eik.bme.hu> [PMD: Split original patch, this is part 4/4, added notes] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Correctly reset all registers to default values on resetBALATON Zoltan
Reset the registers in the DeviceReset() handler which is called on each device reset, not in DeviceRealize() which is called once. Bit 0 of 'Power Mgmt I/O Base' register (offset 0x48) is always set. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <cff9b2442d3e2e1cfbdcbc2dfbb559031b4b1cc1.1610223397.git.balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Split original patch, this is part 3/4 (move to reset), document] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Correct vt82c686-pm I/O sizeBALATON Zoltan
Section "Offset 4B-48 – Power Management I/O Base" describes: Port Address for the base of the 128-byte Power Management I/O Register block. Correct the vt82c686-pm I/O region size. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <cff9b2442d3e2e1cfbdcbc2dfbb559031b4b1cc1.1610223397.git.balaton@eik.bme.hu> [PMD: Split original patch, this is part 2/4, reduced size to 128B] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Make vt82c686-pm an I/O tracing regionBALATON Zoltan
Previously just an empty RAM region was mapped on realize, now we add an empty io range logging access instead. I think the pm timer should be hooked up here but not sure guests need it. PMON on fuloong2e sets a base address but does not seem to enable region; the pegasos2 firmware pokes some regs but continues anyway so don't know if anything would make use of these facilities. Therefore this is just a clean up of previous state for now and not intending to fully implement missing functionality which could be done later if some guests need it. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <cff9b2442d3e2e1cfbdcbc2dfbb559031b4b1cc1.1610223397.git.balaton@eik.bme.hu> [PMD: Split original patch, this is part 1/4 (make 'vt82c686-pm' an I/O tracing region)] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Fix SMBus IO base and configuration registersBALATON Zoltan
The base address of the SMBus io ports and its enabled status is set by registers in the PCI config space but this was not correctly emulated. Instead the SMBus registers were mapped on realize to the base address set by a property to the address expected by fuloong2e firmware. Fix the base and config register handling to more closely model hardware which allows to remove the property and allows the guest to control this mapping. Do all this in reset instead of realize so it's correctly updated on reset. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <f2ca2ad5f08ba8cee07afd9d67b4e75cda21db09.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Reorganise codeBALATON Zoltan
Move lines around so that object definitions become consecutive and not scattered around. This brings functions belonging to an object together so it's clearer what is defined and what parts belong to which object. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <9f942989dba46fc1c23b881f6cb135948f818c2f.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21vt82c686: Move superio memory region to SuperIOConfig structBALATON Zoltan
The superio memory region holds the io space index/data registers used to access the superio config registers that are implemented in struct SuperIOConfig. To keep these related things together move the memory region to SuperIOConfig and rename it accordingly. Also remove the unused "data" member of SuperIOConfig which is not needed as we store actual data values in the regs array. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <dc3c4e7632716ca73c10506bd02ee93b39c28705.1610223397.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Use GPR move functions in gen_HILO1_tx79()Philippe Mathieu-Daudé
We have handy functions to access GPR. Use gen_store_gpr() for Move From HI/LO Register and gen_load_gpr() for Move To opcodes. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-8-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpersPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-7-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Rename 128-bit upper halve GPR registersPhilippe Mathieu-Daudé
TCG displays the upper halve registers with the same name as their lower halves. Rename the upper halves with the '[hi]' suffix. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-6-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Promote 128-bit multimedia registers as global onesPhilippe Mathieu-Daudé
The cpu::mmr[] array contains the upper halves of 128-bit GPR registers. While they are only used by the R5900 CPU, the concept is generic and could be used by another MIPS implementation. Rename 'cpu::mmr' as 'cpu::gpr_hi' and make them global. When the code is similar to the GPR lower halves, move it close by. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-5-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Make cpu_HI/LO registers publicPhilippe Mathieu-Daudé
We will access the cpu_HI/LO registers outside of translate.c. Make them publicly accessible. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210214175912.732946-4-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21target/mips: Include missing "tcg/tcg.h" headerPhilippe Mathieu-Daudé
Commit 83be6b54123 ("Fix MSA instructions LD.<B|H|W|D> on big endian host") introduced use of typedef/prototypes declared in "tcg/tcg.h" without including it. This was not a problem because "tcg/tcg.h" is pulled in by "exec/cpu_ldst.h". To be able to remove this header there, we first need to include it here in op_helper.c, else we get: [222/337] Compiling C object libqemu-mips-softmmu.fa.p/target_mips_msa_helper.c.o target/mips/msa_helper.c: In function ‘helper_msa_ld_b’: target/mips/msa_helper.c:8214:9: error: unknown type name ‘TCGMemOpIdx’ 8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \ | ^~~~~~~~~~~ target/mips/msa_helper.c:8224:5: note: in expansion of macro ‘MEMOP_IDX’ 8224 | MEMOP_IDX(DF_BYTE) | ^~~~~~~~~ target/mips/msa_helper.c:8214:26: error: implicit declaration of function ‘make_memop_idx’ [-Werror=implicit-function-declaration] 8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \ | ^~~~~~~~~~~~~~ target/mips/msa_helper.c:8227:18: error: implicit declaration of function ‘helper_ret_ldub_mmu’ [-Werror=implicit-function-declaration] 8227 | pwd->b[0] = helper_ret_ldub_mmu(env, addr + (0 << DF_BYTE), oi, GETPC()); | ^~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210207232310.2505283-4-f4bug@amsat.org>
2021-02-21target/mips: Remove unused 'rw' argument from page_table_walk_refill()Philippe Mathieu-Daudé
As the 'rw' argument is unused, remove it. Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210220202026.2305667-1-f4bug@amsat.org>
2021-02-21target/mips: Let CPUMIPSTLBContext::map_address() take MMUAccessTypePhilippe Mathieu-Daudé
get_seg_physical_address() calls CPUMIPSTLBContext::map_address() handlers passing a MMUAccessType type. Update the prototype handlers to take a MMUAccessType argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-14-f4bug@amsat.org>
2021-02-21target/mips: Let get_seg*_physical_address() take MMUAccessType argPhilippe Mathieu-Daudé
get_physical_address() calls get_seg_physical_address() and get_segctl_physical_address() passing a MMUAccessType type. Let the prototypes use it as argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-13-f4bug@amsat.org>
2021-02-21target/mips: Let get_physical_address() take MMUAccessType argumentPhilippe Mathieu-Daudé
All these functions: - mips_cpu_get_phys_page_debug() - cpu_mips_translate_address() - mips_cpu_tlb_fill() - page_table_walk_refill() - walk_directory() call get_physical_address() passing a MMUAccessType type. Let the prototype use it as argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-12-f4bug@amsat.org>
2021-02-21target/mips: Let raise_mmu_exception() take MMUAccessType argumentPhilippe Mathieu-Daudé
Both mips_cpu_tlb_fill() and cpu_mips_translate_address() pass MMUAccessType to raise_mmu_exception(). Let the prototype use it as argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-11-f4bug@amsat.org>
2021-02-21target/mips: Let cpu_mips_translate_address() take MMUAccessType argPhilippe Mathieu-Daudé
The single caller, do_translate_address(), passes MMUAccessType to cpu_mips_translate_address(). Let the prototype use it as argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-10-f4bug@amsat.org>
2021-02-21target/mips: Let do_translate_address() take MMUAccessType argumentPhilippe Mathieu-Daudé
The single caller, HELPER_LD_ATOMIC(), passes MMUAccessType to do_translate_address(). Let the prototype use it as argument, as it is stricter than an integer. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-9-f4bug@amsat.org>
2021-02-21target/mips: Replace magic value by MMU_DATA_LOAD definitionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-7-f4bug@amsat.org>
2021-02-21target/mips: Remove unused MMU definitionsPhilippe Mathieu-Daudé
Remove these confusing and unused definitions. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-6-f4bug@amsat.org>
2021-02-21target/mips: Remove access_type argument from get_physical_address()Philippe Mathieu-Daudé
get_physical_address() doesn't use the 'access_type' argument, remove it to simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-5-f4bug@amsat.org>
2021-02-21target/mips: Remove access_type arg from get_segctl_physical_address()Philippe Mathieu-Daudé
get_segctl_physical_address() doesn't use the 'access_type' argument, remove it to simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-4-f4bug@amsat.org>
2021-02-21target/mips: Remove access_type argument from get_seg_physical_addressPhilippe Mathieu-Daudé
get_seg_physical_address() doesn't use the 'access_type' argument, remove it to simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-3-f4bug@amsat.org>
2021-02-21target/mips: Remove access_type argument from map_address() handlerPhilippe Mathieu-Daudé
TLB map_address() handlers don't use the 'access_type' argument, remove it to simplify. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210128144125.3696119-2-f4bug@amsat.org>
2021-02-21target/mips: fetch code with translator_ldPhilippe Mathieu-Daudé
Similarly to commits ae82adc8e29..7f93879e444, use the translator_ld*() API introduced in commit 409c1a0bf0f to fetch the code on the MIPS target. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210125105818.2707067-1-f4bug@amsat.org>
2021-02-21tests/acceptance: Test PMON with Loongson-3A1000 CPUJiaxun Yang
Test booting of PMON bootloader on loongson3-virt platform. $ (venv) AVOCADO_ALLOW_UNTRUSTED_CODE=1 \ avocado --show=app,console \ run -t machine:loongson3-virt tests/acceptance Fetching asset from tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console JOB ID : 8e202b3727847c9104d0d3d6546ed225d35f6706 JOB LOG : /home/flygoat/avocado/job-results/job-2021-01-12T10.02-8e202b3/job.log (1/1) tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console: console: PMON2000 MIPS Initializing. Standby... console: 00000000Jump to 9fc console: Init Memory done. console: The uncache data is: console: 00000000: 5555555555555555 console: 00000008: aaaaaaaaaaaaaaaa console: 00000010: 3333333333333333 console: 00000018: cccccccccccccccc console: 00000020: 7777777777777777 console: 00000028: 8888888888888888 console: 00000030: 1111111111111111 console: 00000038: eeeeeeeeeeeeeeee console: The cached data is: console: 00000000: 5555555555555555 console: 00000008: aaaaaaaaaaaaaaaa console: 00000010: 3333333333333333 console: 00000018: cccccccccccccccc console: 00000020: 7777777777777777 console: 00000028: 8888888888888888 console: 00000030: 1111111111111111 console: 00000038: eeeeeeeeeeeeeeee console: Copy PMON to execute location... console: start = 0x8f900000 console: s0 = 0x30300000 console: _edata = 0x8f989010 console: _end = 0x8f98a028copy text section done. console: Copy PMON to execute location done. console: sp=8f8fc000 console: Uncompressing Bios............................................................................OK,Booting Bios console: FREQ console: DONE console: DEVI console: ENVI console: MAPV console: NVRAM@8f7ff898 console: STDV console: 80100000: memory between 8f7ff400-8f800000 is already been allocated,heap is already above this point console: SBDD console: P12PCIH console: PCIH console: PCID console: setting up 1 bus console: PCI bus 0 slot 1: probe...completed console: PCI bus 0 slot 1/0: vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00) console: PCI bus 0 slot 1/0: reg 0x10 = 0xffffff00 console: PCI bus 0 slot 2: probe...completed console: PCI bus 0 slot 2/0: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) console: PCI bus 0 slot 2/0: reg 0x10 = 0xffffffe1 console: PCI bus 0 slot 2/0: reg 0x14 = 0xfffff000 console: PCI bus 0 slot 2/0: reg 0x20 = 0xffffc00c console: PCI bus 0 slot 2/0: reg 0x30 = 0xfffc0000 console: PCI bus 0 slot 3: probe...completed console: PCI bus 0 slot 4: probe...completed console: PCI bus 0 slot 5: probe...completed console: PCI bus 0 slot 6: probe...completed console: PCI bus 0 slot 7: probe...completed console: PCI bus 0 slot 8: probe...completed console: PCI bus 0 slot 9: probe...completed console: PCI bus 0 slot 10: probe...completed console: PCI bus 0 slot 11: probe...completed console: PCI bus 0 slot 12: probe...completed console: PCI bus 0 slot 13: probe...completed console: PCI bus 0 slot 14: probe...completed console: PCI bus 0 slot 15: probe...completed console: PCI bus 0 slot 16: probe...completed console: PCI bus 0 slot 17: probe...completed console: PCI bus 0 slot 18: probe...completed console: PCI bus 0 slot 19: probe...completed console: PCI bus 0 slot 20: probe...completed console: PCI bus 0 slot 21: probe...completed console: PCI bus 0 slot 22: probe...completed console: PCI bus 0 slot 23: probe...completed console: PCI bus 0 slot 24: probe...completed console: PCI bus 0 slot 25: probe...completed console: PCI bus 0 slot 26: probe...completed console: PCI bus 0 slot 27: probe...completed console: PCI bus 0 slot 28: probe...completed console: PCI bus 0 slot 29: probe...completed console: PCI bus 0 slot 30: probe...completed console: PCI bus 0 slot 31: probe...completed console: PCIS console: PCIR console: PCIW console: PCI bus 0 slot 2/0: mem @0x40000000, reg 0x30 262144 bytes console: PCI bus 0 slot 2/0: mem @0x40040000, reg 0x20 16384 bytes console: PCI bus 0 slot 2/0: mem @0x40044000, reg 0x14 4096 bytes console: PCI bus 0 slot 1/0: mem @0x40045000, reg 0x10 256 bytes console: PCI bus 0 slot 2/0: exp @0x40000000, 262144 bytes console: PCI bus 0 slot 2/0: i/o @0x00004000, reg 0x10 32 bytes console: NETI console: RTCL console: PCID console: VGAI console: memorysize=c000000,base=8f6ff508,sysMem=8f6ef500 console: in setup_int_vect!done!VESA console: vga bios init failed, rc=-1 console: in configure console: mainbus0 (root) console: localbus0 at mainbus0 console: loopdev0 at mainbus0pcibr0 at mainbus0 console: pci0 at pcibr0 bus 0 console: ohci0 at pci0 dev 1 function 0 vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc0045000, bus_base is : 0xc0000000 console: OHCI revision: 0x00000010 console: RH: a: 0x00000203 b: 0x00000000 console: early period(0x0) console: OHCI 8c01ec00 initialized ok console: New Device 0 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 110 console: bDeviceClass =9 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 1 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 110 console: bDeviceClass =9 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =0 console: idProduct =0 console: bcdDevice =0 console: iManufacturer=0 console: iProduct =1 console: iSerialNumber=0 console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 25, wLength 25 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=19 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=0 console: bmAttributes=40 console: MaxPower=0 console: 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff console: ##EP epmaxpacketin[1] = 2 console: set configuration 1 console: new device strings: Mfr=0, Product=1, SerialNumber=0 console: USB device number 1 default language ID 0x409 console: Manufacturer console: Product OHCI Root Hub console: SerialNumber console: New Device 1 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 2 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =627 console: idProduct =1 console: bcdDevice =0 console: iManufacturer=1 console: iProduct =4 console: iSerialNumber=b console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 34, wLength 34 console: unknown Description Type : 21 console: 09 21 11 01 00 01 22 3F 00 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=22 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=8 console: bmAttributes=a0 console: MaxPower=32 console: 09 04 00 00 01 03 01 01 00 09 21 11 01 00 01 22 3f 00 07 05 81 03 08 00 0a console: ##EP epmaxpacketin[1] = 8 console: set configuration 1 console: new device strings: Mfr=1, Product=4, SerialNumber=11 console: USB device number 2 default language ID 0x409 console: Manufacturer QEMU console: Product QEMU USB Keyboard console: SerialNumber 68284-0000:00:01.0-1 console: drive at ohci0 devnum 2, Product QEMU USB Keyboard console: not configured console: New Device 2 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: set address 3 console: usb_get_descriptor console: bLength = 12 console: bDescriptorType =1 console: bcdUSB = 200 console: bDeviceClass =0 console: bDeviceSubClass =0 console: bDeviceProtocol =0 console: bMaxPacketSize0 =8 console: idVendor =627 console: idProduct =1 console: bcdDevice =0 console: iManufacturer=1 console: iProduct =3 console: iSerialNumber=a console: bNumConfigurations=1 console: usb_get_descriptor console: usb_get_descriptor console: get_conf_no 0 Result 34, wLength 34 console: unknown Description Type : 21 console: 09 21 01 00 00 01 22 4A 00 console: if 0, ep 0 console: bLength=9 console: bDescriptorType=2 console: wTotalLength=22 console: bNumInterfaces=1 console: bConfigurationValue=1 console: iConfiguration=7 console: bmAttributes=a0 console: MaxPower=32 console: 09 04 00 00 01 03 00 00 00 09 21 01 00 00 01 22 4a 00 07 05 81 03 08 00 0a console: ##EP epmaxpacketin[1] = 8 console: set configuration 1 console: new device strings: Mfr=1, Product=3, SerialNumber=10 console: USB device number 3 default language ID 0x409 console: Manufacturer QEMU console: Product QEMU USB Tablet console: SerialNumber 28754-0000:00:01.0-2 console: drive at ohci0 devnum 3, Product QEMU USB Tablet console: not configured console: drive at ohci0 devnum 1, Product OHCI Root Hub console: not configured console: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) at pci0 dev 2 function 0 not configured console: out configure console: Press <Del> to set BIOS,waiting for 3 seconds here..... console: devconfig done. console: ifinit done. console: domaininit done. console: init_proc.... console: HSTI console: SYMI console: SBDE console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ console: [[ [[[[[[[[[ [[[[[ [[[[ [[[[[ [[[[[ [[[[[ [[[[[ [[[[ [[[[[ [[ console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [ [[[ [[[ [[[[[[[[[[[[ [[[[[[[ [[[[[[ [[[ [ [[[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[ [[ [[[ [[[ [[[[[[[ [[[[ [[[[[[ [[[ [[ [[ [[ console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[[ [ [[[ [[[[[ [[[[[[[[[[ [[[ [[[[[[ [[[ [[[ [ [[ console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[ [[[[ [[[[ [[[ [[[[ [[ console: [[ [[[[ [[[[[ [[[[ [[[[[ [[[[ [[[[[ [[[[[[ [[[[ [[[[[ [[ console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[2011 Loongson][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ console: Configuration [Bonito,EL,NET,SCSI,IDE] console: Version: PMON2000 3.3 (Bonito) #0: Tue Dec 22 01:58:09 UTC 2020 commit b3ece66234adbf7d4e453f0ba4f326c099ac2a76 Author: Jiaxun Yang <jiaxun.yang@flygoat.com> Date: Tue Dec 22 09:51:10 2020 +0800 . console: Supported loaders [txt, srec, elf, bin] console: Supported filesystems [net, fat, fs, disk, iso9660, socket, tty, ram] console: This software may be redistributed under the BSD copyright. console: Copyright 2000-2002, Opsycon AB, Sweden. console: Copyright 2005, ICT CAS. console: CPU GODSON3 BogoMIPS: 1327 PASS (3.89 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 4.38 s Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210112020708.62922-1-jiaxun.yang@flygoat.com> [PMD: Set timeout to 60sec, simply test for ''CPU GODSON3 BogoMIPS'] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21hw/intc/loongson_liointc: Fix per core ISR handlingJiaxun Yang
Per core ISR is a set of 32-bit registers spaced by 8 bytes. This patch fixed calculation of it's size and also added check of alignment at reading & writing. Fixes: Coverity CID 1438965 and CID 1438967 Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Message-Id: <20210112012527.28927-1-jiaxun.yang@flygoat.com> [PMD: Added Coverity CID] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21hw/mips/boston: Use bootloader helper to set GCRsJiaxun Yang
Translate embedded assembly into IO writes which is more readable. Also hardcode cm_base at boot time instead of reading from CP0. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210127065424.114125-5-jiaxun.yang@flygoat.com> [PMD: Kept code comments] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-25 12:58:56 +0000